DFT studies of the characteristics of Pd−Pt core-shell clusters

It is reported that Pd?Pt core-shell type nanoclusters in which the inner atoms of the Pd cluster are substituted by Pt significantly enhance the catalytic activity for cycloocatdiene hydrogenation. In order to discuss the electronic states of core-shell clusters, DFT calculations were carried out for Pd₁₃, Pt₁₃, Pt/Pd₁₂, Pd/Pt₁₂ Pd₃₈ and Pd₆/Pt₃₂ clusters. From these calculations, it was found that the charge transfer between the core atoms and the shell atoms played an important role for the modification of the electronic state of the surface atoms in them.     

Adsorption and Vibration of O on the Pt Stepped Surfaces

1 INTRODUCTION Atom adsorption on transition metal surfaces has attracted special attention as a basis for understand- ing the fundamental processes of oxidative cataly- sis. An oxygen-covered platinum surface for example, plays a central role in several important reactions, such as oxidation of carbon monoxide[1]. Moreover, the behavior of oxygen in the proximity of surface defects like kinks and steps is a central issue in understanding the chemisorption processes on ca- talytic surfaces…     

Layer-by-layer electrosynthesis of Pt–Polyaniline nanocomposites for the catalytic oxidation of methanol

A new composite material based on the electrochemical generation of a layer-by-layer structure of polyaniline (PANI) and Pt particles has been prepared. The number of layers and the nature of the external layer (PANI or Pt) determine the electrocatalytic performance of the composite for the oxidation of methanol. We demonstrate that the layer-by-layer approach to form the nanocomposite and modification of the Pt particles with a layer of PANI leads to substantially higher catalytic efficiency.     

Electrochemical determination of the surface composition of Pd–Pt core–shell nanoparticles

Different amounts of Pt atoms were deposited onto the surface of Pd nanoparticles supported on carbon black by hydroquinone reduction method in anhydrous ethanol. Here, we surveyed electrochemical probing of surface compositions of Pd–Pt surface alloys. They were calculated from hydrogen desorption, carbon monoxide adlayer oxidation, and reduced carbon dioxide oxidation charges. The surface composition of Pt drastically increased up to Pt[0.3]/Pd/C (23.1 at.% of Pt) and then approached that of pure Pt with the moderate rate of increase.     

Effect of de-alloying of Pt–Ni bimetallic nanoparticles on the oxygen reduction reaction

Carbon-supported Pt–Ni alloy nanoparticles with various compositions were prepared by a borohydride reduction method in anhydrous ethanol solvent. Here, we surveyed effect of thermally induced de-alloying on activity of the oxygen reduction reaction (ORR). Especially, changes in surface and bulk structures were investigated through electrochemical and spectroscopic measurements. The activity of as-prepared Pt–Ni alloy nanoparticles showed a monotonous dependence on Pt content. However, heat-treatment induced the phase separation between Pt and NiO and the resultant enhancement in ORR activity without significant increase in surface Pt concentration.     

Enantioselective hydrogenation of pyrrolidine-2,3,5-triones over the Pt–cinchonidine system

1- and 4-Substituted pyrrolidine-2,3,5-triones 5, 6 and 9 have been synthesized and hydrogenated to 3-hydroxy derivatives 10–12 with 17–91% ee using a 5 wt% Pt/Al₂O₃ catalyst in the presence of small amounts of cinchonidine. The influence of substituents on the enantioselectivity is discussed.     

Studies on the Sulfinatodehalogenation Pt.30:Synthesis of Trifluorovinyl Compounds

Trifloorovinylcompoundswereusefulmonomersusedwidelyinthepolymerfield.Synthesisofsuchcompoundsattractsmuchattention.Functionalizedtrifluorovinylcompoundshaveuniquepropertiesasmonomersinpolymerizationandcanbeexpectedtoundergoselectivereactionsatthetrifluorovinyloratthefunctionalgroupsite.lHowever,fewpapershaveappearedonthepreparationofsuchcompounds.2'3InthecontinuingstudyonthesulfinatodehalogenationofBrCF2CFClR,aseriesoftrifluoroalkylcompoundswereobtained.Hereinwereporttheresults.Treatmentof…     

Influence of NO on the Reduction of NO2 with CO over Pt/SiO2 in the Presence of O2

Reduction of NO2 with CO in the presence of NO and excess oxygen, a model mixture for flue gas, over a 0.1% Pt/SiO2 catalyst was studied. The related reaction mechanisms, such as oxidation of CO and NO, were discussed. It was found that there was a narrow temperature window （180-190 ℃） for the reduction of NO2 by CO. When the temperature was lower than the lower limit of the window, the reduction hardly occurred, while when the temperature was higher than the upper limit of the window, the direct oxidation of CO by O2 occurred and thereby NO2 could not be effectively reduced by CO. The presence of NO shifted the window to higher temperatures owing to the inhibition effect of NO on the activation of O2 on Pt, which made it possible to reduce NO2 by CO in flue gas.     

Modulation of Electrochemical Oscillations by Specific Adsorption of Cl^— during the Electrooxidation of Methanol on Pt Electrode

Potential oscillation during the electrocatalytic oxidation of methanol can be modulated by the specific adsorption of Cl^- on the platinum electrode, which suppresses the electrocatalytic oxidation of methanol, and makes the cross cycle in the cyclic voltammogram become smaller and finally disappear with the increase of Cl^- concentration. The method is also applicable to the electrocatalytic oxidation of other small organic molecules.     

Structural evolution of Pt/ceria–zirconia TWC catalysts during the oxidation of carbon monoxide

The structural evolution of two Pt/ceria–zirconia catalysts, characterized by different amounts of supported Pt, was monitored by in situ X-ray diffraction during the anaerobic oxidation of CO at different temperatures. In a first phase, oxygen coming from the surface layers of the ceria–zirconia mixed oxide is consumed and no structural variation of the support is observed. After this induction time, bulk reduction of Pt/ceria–zirconia takes place as a step-like process, while the CO₂ production continues at a nearly constant rate. This behavior is totally different from that of the metal-free support in similar reaction conditions, that show a gradual bulk reduction. In repeated oxidation–reduction cycles, it was observed that the induction time in Pt/ceria–zirconia is a function of the thermal history, of the amount of supported Pt and of the structural evolution of the samples.     

Studies of surface processes of electrocatalytic reduction of CO_2 on Pt(210), Pt(310) and Pt(510)

Surface processes of CO2 reduction on Pt(210), Pt(310), and Pt(510) electrodes were studied by cyclic voltammetry. Different surface structures of these platinum single crystal electrodes were obtained by various treatment conditions. The experimental results illustrated that the electrocatalytic activity of Pt single crystal electrodes towards CO2 reduction is decreased in an order of Pt(210)>Pt(310)>Pt(510), i.e., with the decrease of (110) step density on well-defined surfaces. When the surfaces were reconstructed due to oxygen adsorption, the catalytic activity of all the three electrodes has been enhanced to a cer- tain extent. Although the activity order remains unchanged, the electrocatalytic activity has been en- hanced more significantly as the density of (110) step sites is more intensive on the Pt single crystal surface. It has revealed that the more open the surface structure is, the more active the Pt single crystal electrode will be, and the easier for the electrode to be transformed into a surface structure that exhib- its higher activity under external inductions. However, the relatively ordered surfaces of Pt single crystal electrode are comparatively stable under the same external inductions. The present study has gained knowledge on the interaction between CO2 and Pt single crystal electrode surfaces at a micro- scopic level, and thrown new insight into understanding the surface processes of electrocatalytic re- duction of CO2.     

Stack pattern of the countercation-modulating magnetic property of low-dimensional [Pt(mnt)₂]⁻ monoanion spin systems

Three [1-N-(4'-R-benzyl)-4-aminopyridinium][Pt(mnt)(2)] compounds were structurally and magnetically characterized, where the substituent was attached to the para-position of the phenyl ring (R = CN (1), Cl (2), and H (3); mnt(2-) = maleonitriledithiolate). 1 and 2 crystallized in the monoclinic space group P2(1)/c, with the cations and anions forming segregated columnar stacks. Their structural differences involved two aspects: (1) both anion and cation stacks were regular in 1 and irregular in 2; (2) the neighboring cations were arranged in the boat-type pattern in 1, whereas these cations were in the chair-type pattern in 2 within the cation stack. 3 belonged to the triclinic space group P ?1, where the anions were assembled into the stack with a tetrameric [Pt(mnt)(2)](-) subunit, but the cations did not form the columnar stack. Magnetic measurements disclosed that a spin-Peierls-type transition occurred around 240 K for 1, whereas a long-range, antiferromagnetic ordering took place at about 5.8 K, and a metamagnetic phenomenon was observed with H(C) ≈ 1000 Oe for 2; 3 showed very strong antiferromagnetic interactions with diamagnetism in the temperature range 5-300 K. Combined with our previous studies, the correlation between the stacking pattern of benzylpyridinium derivatives in a cation stack and the spin-Peierls-type transition is discussed for the series of quasi-1-D [M(mnt)(2)](-) (M = Ni, Pd and Pt) compounds.     

Synthesis of Nafion~-stabilized Pt nanoparticles to improve the durability of proton exchange membrane fuel cell

Nafion-stabilized Pt nanoparticle colloidal solution is synthesized through ethylene glycol reduction.Pt/Nafion added with carbon black as electric conduction material(labeled Pt/Nafion-XC72) shows excellent electrochemical property compared with Pt/C.After a 300-cycle discharging durability test,the cell performance of membrane electrode assembly(MEA) with the Pt/Nafion-XC72 and Pt/C catalysts indicates a 29.9% and 92.2% decrease,respectively.The charge transfer resistances of Pt/Nafion-XC72 and Pt/C increase by 27.2% and 101.9%,respectively.The remaining electrochemically active surface area of Pt is about 61.7% in Pt/Nafion-XC72 and about 38.1% in Pt/C after the durability test.The particle size of Pt/C increases from about 5.1 nm to about 10.8 nm but only from 3.6 nm to 5.8 nm in the case of Pt/Nafion-XC72.These data suggest that Pt/Nafion-XC72 as a catalyst can enhance the durability of PEMFCs compared with Pt/C.     

Preparation, Characterization of Hydrotalcites and the Catalytic Properties in Synthesis of o-Phenylphenol over Pt／CHT

Mg/Al mixed oxides with molar ratios of 2-6 of Mg to Al used as supports for platinum catalysts were obtained by the thermal decomposition method. The effect of the composition of the mixed oxides on the physicochemical properties was studied by TPD, nitrogen sorption, XRD and TG-DTA characterization methods. The synthesis of o-phenylphenol (OPP) from a dimer (obtained from cyclohexanone condensation) was investigated over Pt/CHT catalysts and compared with those over Pt/MgO and Pt/Al2O3 catalysts. These catalysts show a high activity and selectivity for OPP, with a conversion reaching 93.8% and a selectivity reaching 87.9% in some experiments. For Pt/CHTx catalysts, the calcined hydrotalcites exhibited strong base sites, which were necessary to catalyze the synthesis of OPP.     

Determination of particle size in the range below 10 Å for ultrathin films of Pt/C

The phenomenon of clustering and its influence on the catalytic activity of the Pt/C system is studied. Coverages of the order of 10¹² atoms/cm² were used. Calculations permit the estimation of the most active particles as dimers and other large particles of the B₄ and B₅ site types.     

Electron-deficient adduct site in the ring opening of methylcyclopentane (MCP) on tungsten-oxide-supported Pt,Ir and Pt–Ir catalysts

The activities of Pt/WO₂, Ir/WO₂ and Pt–Ir/WO₂ toward the conversion of methylcyclopentane (MCP) were investigated. The catalysts were prepared using impregnation and co-impregnation methods and were characterized by SEM, XRD, N₂-sorption and TEM investigations. The most active catalyst toward the conversion of MCP, irrespective of the temperature, was Ir/WO₂. The order of the reactivity was Ir/WO₂ > Pt–Ir/WO₂ > Pt/WO₂. Strong metal–support interactions (SMSI) were observed for all the catalysts over the entire investigated temperature range. At 400 °C, the Pt and Pt–Ir showed 100% selectivity toward ring-enlargement reactions associated with the presence of electron-deficient adduct sites on the reducible acidic WO₂ support. Ring opening occurred over all the catalysts in three positions, resulting in the formation of 2-methylpentane (2-MP), 3-methylpentane (3-MP), and n-hexane (n-H). Difficulty in breaking the secondary – tertiary carbon bonds was observed predominantly on the Ir catalyst, which opens the MCP ring via a selective mechanism.     

Unique CO-tolerance of Pt–WOx materials

Well-defined tungsten-oxide-supported platinum nanoparticles (Pt/WO_x) were elaborated by impregnation-reduction of a platinum salt onto commercial monoclinic WO₃. Field-emission gun scanning electron microscopy (FEG-SEM) and transmission electron microscopy (TEM) revealed that the Pt particles are well-distributed on the oxide support, present a narrow particle size distribution centered on ca. 2–3 nm and a low degree of agglomeration. Carbon black was added to ensure electronic percolation in the electrodes during the electrochemical measurements. CO_ads electrooxidation currents were monitored at potentials as low as 0.1 V vs. RHE on Pt/WO_x, demonstrating high CO-tolerance compared to carbon-supported Pt or PtRu catalysts.     

Electrochemical properties of Ebonex®/Pt anodes

The electrochemical behavior of platinized Ebonex® was studied. The electrochemical and semiconductor properties of electrodes can be varied within wide limits by thermal treatment of Ebonex®/Pt, which selectively affects the electrocatalytic activity of anodes in the oxygen evolution reaction. The reduction peak of platinum oxides on the cyclic voltammetry (CV) curves can be used as a correlation parameter when evaluating the electrocatalytic activity of Ebonex®/Pt electrodes in the oxygen evolution reaction.     

Underpinning energetics of lithium bonding and stability in the Li–Pt–Sn system

Within the Li–Pt–Sn system, we examine the electronic structures and Li-binding of LiPtSn₂, Li₂PtSn and Li₃Pt₂Sn₃ with fluorite-related crystal structures. The structures with totally de-intercalated lithium keep the characteristics of the pristine ternary compound with a reduction of the volume. In Li₃Pt₂Sn₃ the binding energies of lithium belonging to three crystallographically inequivalent Wyckoff sites are different and point to distinct activities of de-intercalation concomitant with site-selective bonding magnitudes. The derived potentials are within the range of non-oxide binary and ternary lithium based compounds and indicate the possibility of at least partial delithiation.