Energies of the gas-phase deprotonation of nitro-substituted benzenesulfonic and benzoic acids: The role of the conformation isomerism of sulfonic acids

The Gibbs energies of deprotonation Δ_r G ₂₉₈ ^○ of gaseous benzoic acid (BA), benzenesulfonic acid (BSA) and their six mono-, di-, and trinitro-substituted derivatives are calculated by means of B3LYP/cc-pVTZ and MP2/6-311++G**. The dependences of Δ_r G ₂₉₈ ^○ on the number and the position of nitro groups in an aromatic ring are revealed, as is the possibility of intramolecular hydrogen bond (IHB) formation in ortho-substituted acids. It is found that the deprotonation of conformers of ortho-nitro-substituted BSA without IHBs requires less energy (by 4–5 kcal/mol) than for conformers with IHBs. It is shown that the Δ_r G ₂₉₈ ^○ values for substituted BA are ～22 kcal/mol higher than the corresponding values for substituted BSA. A trend of diminishing Δ_r G ₂₉₈ ^○ for nitro-substituted acids is observed when the number of nitro groups is increased, and di- and trinitro-substituted BSA may therefore be considered superstrong acids.     

Explorations on Thermodynamic and Kinetic Performances of Various Cationic Exchange Durations for Synthetic Clinoptilolite

Various cation–exchanged clinoptilolites (M–CPs, M = Li⁺, Cs⁺, Ca²⁺, Sr²⁺) were prepared, and their exchanged thermodynamic (and kinetic) properties and adsorption performances for CH₄, N₂, and CO₂ were investigated. The results demonstrated that the relative crystallinity of M–CP_S decreased with the increase of exchange times. Their chemisorbed water weight loss gradually increased with the increasing exchange times, except that of Cs–x–CP. The Δ_rGmθ values of exchange process of Li⁺, Cs⁺, Ca²⁺, or Sr² presented the increased trend with the enhanced exchange times, but they decreased as the temperature increased. The negative Δ_rGmθ values and the positive Δ_rHmθ and Δ_rSmθ values suggested that the exchanged procedure belonged to spontaneous, endothermic, and entropy-increasing behaviors; their kinetic performances followed a pseudo–second–order model. However, the calculated E_a values of exchange process showed the increased tendencies with the enhanced exchange times, indicating that the exchange process became more difficult. Finally, the preliminary adsorption results indicated that the maximum adsorption amount at 273 K and 1 bar was 0.51 mmol/g of CH₄ and 0.38 mmol/g of N₂ by (Na, K)–CP, and 2.32 mmol/g of CO₂ by Li–6–CP.     

SnAr Reactions of 2,4-Diazidopyrido[3,2-d]pyrimidine and Azide-Tetrazole Equilibrium Studies of the Obtained 5-Substituted Tetrazolo[1,5-a]pyrido[2,3-e]pyrimidines

A straightforward method for the synthesis of 5-substituted tetrazolo[1,5-a]pyrido[2,3-e]pyrimidines from 2,4-diazidopyrido[3,2-d]pyrimidine in SnAr reactions with N-, O-, and S- nucleophiles has been developed. The various N- and S-substituted products were obtained with yields from 47% to 98%, but the substitution with O-nucleophiles gave lower yields (20–32%). Furthermore, the fused tetrazolo[1,5-a]pyrimidine derivatives can be regarded as 2-azidopyrimidines and functionalized in copper(I)-catalyzed azide-alkyne dipolar cycloaddition (CuAAC) and Staudinger reactions due to the presence of a sufficient concentration of the reactive azide tautomer in solution. In total, seven products were fully characterized by their single crystal X-ray studies, while five of them were representatives of the tetrazolo[1,5-a]pyrido[2,3-e]pyrimidine heterocyclic system. Equilibrium constants and thermodynamic values were determined using variable temperature ¹H NMR and are in agreement of favoring the tetrazole tautomeric form (ΔG₂₉₈ = −3.33 to −7.52 (kJ/mol), ΔH = −19.92 to −48.02 (kJ/mol) and ΔS = −43.74 to −143.27 (J/mol·K)). The key starting material 2,4-diazidopyrido[3,2-d]pyrimidine presents a high degree of tautomerization in different solvents.     

Catalyst control of selectivity in the C–O bond alumination of biomass derived furans

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle. Specifically, the reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl, 1) with furans proceeded between 25 and 80 °C leading to dearomatised products due to the net transformation of a sp² C–O bond into a sp² C–Al bond. The kinetics of the reaction of 1 with furan were found to be 1st order with respect to 1 with activation parameters ΔH^‡ = +19.7 (±2.7) kcal mol⁻¹, ΔS^‡ = −18.8 (±7.8) cal K⁻¹ mol⁻¹ and ΔG^‡_{298 K} = +25.3 (±0.5) kcal mol⁻¹ and a KIE of 1.0 ± 0.1. DFT calculations support a stepwise mechanism involving an initial (4 + 1) cycloaddition of 1 with furan to form a bicyclic intermediate that rearranges by an α-migration. The selectivity of ring-expansion is influenced by factors that weaken the sp² C–O bond through population of the σ*-orbital. Inclusion of [Pd(PCy₃)₂] as a catalyst in these reactions results in expansion of the substrate scope to include 2,3-dihydrofurans and 3,4-dihydropyrans and improves selectivity. Under catalysed conditions, the C–O bond that breaks is that adjacent to the sp²C–H bond. The aluminium(iii) dihydride reagent [{(MesNCMe)₂CH}AlH₂] (Mes = 2,4,6-trimethylphenyl, 2) can also be used under catalytic conditions to effect a dehydrogenative ring-expansion of furans. Further mechanistic analysis shows that C–O bond functionalisation occurs via an initial C–H bond alumination. Kinetic products can be isolated that are derived from installation of the aluminium reagent at the 2-position of the heterocycle. C–H alumination occurs with a KIE of 4.8 ± 0.3 consistent with a turnover limiting step involving oxidative addition of the C–H bond to the palladium catalyst. Isomerisation of the kinetic C–H aluminated product to the thermodynamic C–O ring expansion product is an intramolecular process that is again catalysed by [Pd(PCy₃)₂]. DFT calculations suggest that the key C–O bond breaking step involves attack of an aluminium based metalloligand on the 2-palladated heterocycle. The new methodology has been applied to important platform chemicals from biomass.

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle.     

2,2′-Bipyridyl formation from 2-arylpyridines through bimetallic diyttrium intermediate

An alkylyttrium complex supported by an N,N′-bis(2,6-diisopropylphenyl)ethylenediamido ligand, (ArNCH₂CH₂NAr)Y(CH₂SiMe₃)(THF)₂ (1, Ar = 2,6-ⁱPr₂C₆H₃), activated an ortho-phenyl C–H bond of 2-phenylpyridine (2a) to form a (2-pyridylphenyl)yttrium complex (3a) containing a five-membered metallacycle. Subsequently, a unique C(sp²)–C(sp²) coupling of 2-phenylpyridine proceeded through a bimetallic yttrium intermediate, derived from an intramolecular shift of the yttrium center to an ortho-position of the pyridine ring in 3a, to yield a bimetallic yttrium complex (4a) bridged by two-electron reduced 6,6′-diphenyl-2,2′-bipyridyl. Aryl substituents at the ortho-position of the pyridine ring were key in order to destabilize the μ,κ²-(C,N)-pyridyldiyttrium intermediate prior to the C(sp²)–C(sp²) bond formation.     

Ortho-aryl substituted DPEphos ligands: rhodium complexes featuring C–H anagostic interactions and B–H agostic bonds

The synthesis of new Schrock–Osborn Rh(i) pre-catalysts with ortho-substituted DPEphos ligands, [Rh(DPEphos-R)(NBD)][BAr^F₄] [R = Me, OMe, ⁱPr; Ar^F = 3,5-(CF₃)₂C₆H₃], is described. Along with the previously reported R = H variant, variable temperature ¹H NMR spectroscopic and single-crystal X-ray diffraction studies show that these all have axial (C–H)⋯Rh anagostic interactions relative to the d⁸ pseudo square planar metal centres, that also result in corresponding downfield chemical shifts. Analysis by NBO, QTAIM and NCI methods shows these to be only very weak C–H⋯Rh bonding interactions, the magnitudes of which do not correlate with the observed chemical shifts. Instead, as informed by Scherer''s approach, it is the topological positioning of the C–H bond with regard to the metal centre that is important. For [Rh(DPEphos–ⁱPr)(NBD)][BAr^F₄] addition of H₂ results in a Rh(iii) ⁱPr–C–H activated product, [Rh(κ³,σ-P,O,P-DPEphos-ⁱPr′)(H)][BAr^F₄]. This undergoes H/D exchange with D₂ at the ⁱPr groups, reacts with CO or NBD to return Rh(i) products, and reaction with H₃B·NMe₃/tert-butylethene results in a dehydrogenative borylation to form a complex that shows both a non-classical B–H⋯Rh 3c-2e agostic bond and a C–H⋯Rh anagostic interaction at the same metal centre.

Rh(i) complexes of ortho-substituted DPEphos-R (R = H, Me, OMe, ⁱPr) ligands show anagostic interactions; for R =ⁱPr C–H activation/dehydrogenative borylation forms a product exhibiting both B–H/Rh 3c-2e agostic and C–H/Rh anagostic motifs.     

Competition between N and O: use of diazine N-oxides as a test case for the Marcus theory rationale for ambident reactivity

The preferred site of alkylation of diazine N-oxides by representative hard and soft alkylating agents was established conclusively using the ¹H–¹⁵N HMBC NMR technique in combination with other NMR spectroscopic methods. Alkylation of pyrazine N-oxides (1 and 2) occurs preferentially on nitrogen regardless of the alkylating agent employed, while O-methylation of pyrimidine N-oxide (3) is favoured in its reaction with MeOTf. As these outcomes cannot be explained in the context of the hard/soft acid/base (HSAB) principle, we have instead turned to Marcus theory to rationalise these results. Marcus intrinsic barriers (ΔG^‡₀) and Δ_rG° values were calculated at the DLPNO-CCSD(T)/def2-TZVPPD/SMD//M06-2X-D3/6-311+G(d,p)/SMD level of theory for methylation reactions of 1 and 3 by MeI and MeOTf, and used to derive Gibbs energies of activation (ΔG^‡) for the processes of N- and O-methylation, respectively. These values, as well as those derived directly from the DFT calculations, closely reproduce the observed experimental N- vs. O-alkylation selectivities for methylation reactions of 1 and 3, indicating that Marcus theory can be used in a semi-quantitative manner to understand how the activation barriers for these reactions are constructed. It was found that N-alkylation of 1 is favoured due to the dominant contribution of Δ_rG° to the activation barrier in this case, while O-alkylation of 3 is favoured due to the dominant contribution of the intrinsic barrier (ΔG^‡₀) for this process. These results are of profound significance in understanding the outcomes of reactions of ambident reactants in general.

Marcus theory enables rationalisation and quantification of selectivities in reactions of ambident nucleophiles for which the HSAB principle cannot operate.     

Paramagnetic Properties and Moderately RapidConformational Dynamics in the Cobalt(II) Calix[4]arene Complex by NMR

¹H NMR measurements are reported for the CD₂Cl₂/CDCl₃ solutions of the Co(II) calix[4]arenetetraphosphineoxide complex (I). Temperature dependences of the ¹H NMR spectra of I have been analyzed using the line shape analysis, taking into account the temperature variation of paramagnetic chemical shifts, within the frame of the dynamic NMR method. Conformational dynamics of the 2:1 Co(II) calix[4]arene complexes was conditioned by the pinched cone ↔pinched cone interconversion of I (with activation Gibbs energy ΔG^≠(298K) = 40 ± 3 kJ/mol. Due to substantial temperature dependence of paramagnetic shifts, complex I can be used as model compound for designing an NMR thermosensor reagent for local temperature monitoring.     

Synthesis of a Ni Complex Chelated by a [2.2]Paracyclophane-Functionalized Diimine Ligand and Its Catalytic Activity for Olefin Oligomerization

A diimine ligand having two [2.2]paracyclophanyl substituents at the N atoms (L1) was prepared from the reaction of amino[2.2]paracyclophane with acenaphtenequinone. The ligand reacts with NiBr₂(dme) (dme: 1,2-dimethoxyethane) to form the dibromonickel complex with (R,R) and (S,S) configuration, NiBr₂(L1). The structure of the complex was confirmed by X-ray crystallography. NiBr₂(L1) catalyzes oligomerization of ethylene in the presence of methylaluminoxane (MAO) co-catalyst at 10–50 °C to form a mixture of 1- and 2-butenes after 3 h. The reactions for 6 h and 8 h at 25 °C causes further increase of 2-butene formed via isomerization of 1-butene and formation of hexenes. Reaction of 1-hexene catalyzed by NiBr₂(L1)–MAO produces 2-hexene via isomerization and C12 and C18 hydrocarbons via oligomerization. Consumption of 1-hexene of the reaction obeys first-order kinetics. The kinetic parameters were obtained to be ΔG^‡ = 93.6 kJ mol⁻¹, ΔH^‡ = 63.0 kJ mol⁻¹, and ΔS^‡ = −112 J mol⁻¹deg⁻¹. NiBr₂(L1) catalyzes co-dimerization of ethylene and 1-hexene to form C8 hydrocarbons with higher rate and selectivity than the tetramerization of ethylene.     

Entropy directs the self-assembly of supramolecular palladium coordination macrocycles and cages

The self-assembly of palladium-based cages is frequently rationalized via the cumulative enthalpy (ΔH) of bonds between coordination nodes (M, i.e., Pd) and ligand (L) components. This focus on enthalpic rationale limits the complete understanding of the Gibbs free energy (ΔG) for self-assembly, as entropic (ΔS) contributions are overlooked. Here, we present a study of the M₂^linL₃ intermediate species (M = dinitrato(N,N,N′,N′-tetramethylethylenediamine)palladium(ii), ^linL = 4,4′-bipyridine), formed during the synthesis of triangle-shaped (M₃^linL₃) and square-shaped (M₄^linL₄) coordination macrocycles. Thermochemical analyses by variable temperature (VT) ¹H-NMR revealed that the M₂^linL₃ intermediate exhibited an unfavorable (relative) ΔS compared to M₃^linL₃ (triangle, ΔTΔS = +5.22 kcal mol⁻¹) or M₄^linL₄ (square, ΔTΔS = +2.37 kcal mol⁻¹) macrocycles. Further analysis of these constructs with molecular dynamics (MD) identified that the self-assembly process is driven by ΔG losses facilitated by increases in solvation entropy (ΔS_solv, i.e., depletion of solvent accessible surface area) that drives the self-assembly from “open” intermediates toward “closed” macrocyclic products. Expansion of our computational approach to the analysis of self-assembly in Pd_n^benL_2n cages (^benL = 4,4''-(5-ethoxy-1,3-phenylene)dipyridine), demonstrated that ΔS_solv contributions drive the self-assembly of both thermodynamic cage products (i.e., Pd₁₂^benL₂₄) and kinetically-trapped intermediates (i.e., Pd₈^cL₁₆).

These studies demonstrate that ΔS drives the self-assembly of supramolecular palladium-based coordination macrocycles and cages. As this ΔS contribution arises from solvation, these findings broadly reflect the thermodynamic drive of self-assembly to form compact structures.     

Comparison of the Hydride-Donating Ability and Activity of Five- and Six-Membered Benzoheterocyclic Compounds in Acetonitrile

In this work, we compared the hydride-donating ability of five-membered benzoheterocyclic compounds (FMB) and six-membered benzoheterocyclic compounds (SMB), isomers of DMBI and DMIZ and of DMPZ and DMPX, using detailed thermodynamic driving forces [ΔG^o (XH)], kinetic intrinsic barriers (ΔG^≠_XH/X), and thermo-kinetic parameters [ΔG^≠° (XH)]. For DMBI and DMIZ, the values of ΔG^o (XH), ΔG^≠_XH/X, and ΔG^≠° (XH) are 49.2 and 53.7 kcal/mol, 35.88 and 42.04 kcal/mol, and 42.54 and 47.87 kcal/mol, respectively. For DMPZ and DMPX, the values of ΔG^o (XH), ΔG^≠_XH/X, and ΔG^≠° (XH) are 73.2 and 79.5 kcal/mol, 35.34 and 25.02 kcal/mol, and 54.27 and 52.26 kcal/mol, respectively. It is easy to see that the FMB isomers are thermodynamically dominant and that the SMB isomers are kinetically dominant. Moreover, according to the analysis of ΔG^≠° (XH), compared to the SMB isomers, the FMB isomers have a stronger hydride-donating ability in actual chemical reactions.     

Strategies for switching the mechanism of proton-coupled electron transfer reactions illustrated by mechanistic zone diagrams

The mechanism by which proton-coupled electron transfer (PCET) occurs is of fundamental importance and has great consequences for applications, e.g. in catalysis. However, determination and tuning of the PCET mechanism is often non-trivial. Here, we apply mechanistic zone diagrams to illustrate the competition between concerted and stepwise PCET-mechanisms in the oxidation of 4-methoxyphenol by Ru(bpy)₃³⁺-derivatives in the presence of substituted pyridine bases. These diagrams show the dominating mechanism as a function of driving force for electron and proton transfer (ΔG⁰_ET and ΔG⁰_PT) respectively [Tyburski et al., J. Am. Chem. Soc., 2021, 143, 560]. Within this framework, we demonstrate strategies for mechanistic tuning, namely balancing of ΔG⁰_ET and ΔG⁰_PT, steric hindrance of the proton-transfer coordinate, and isotope substitution. Sterically hindered pyridine bases gave larger reorganization energy for concerted PCET, resulting in a shift towards a step-wise electron first-mechanism in the zone diagrams. For cases when sufficiently strong oxidants are used, substitution of protons for deuterons leads to a switch from concerted electron–proton transfer (CEPT) to an electron transfer limited (ETPT_lim) mechanism. We thereby, for the first time, provide direct experimental evidence, that the vibronic coupling strength affects the switching point between CEPT and ETPT_lim, i.e. at what driving force one or the other mechanism starts dominating. Implications for solar fuel catalysis are discussed.

The mechanism by which proton-coupled electron transfer (PCET) occurs is of fundamental importance and has great consequences for applications, e.g. in catalysis.     

Key difference between transition state stabilization and ground state destabilization: increasing atomic charge densities before or during enzyme–substrate binding

The origin of the enormous catalytic power of enzymes has been extensively studied through experimental and computational approaches. Although precise mechanisms are still subject to much debate, enzymes are thought to catalyze reactions by stabilizing transition states (TSs) or destabilizing ground states (GSs). By exploring the catalysis of various types of enzyme–substrate noncovalent interactions, we found that catalysis by TS stabilization and the catalysis by GS destabilization share common features by reducing the free energy barriers (ΔG^‡s) of reactions, but are different in attaining the requirement for ΔG^‡ reduction. Irrespective of whether enzymes catalyze reactions by TS stabilization or GS destabilization, they reduce ΔG^‡s by enhancing the charge densities of catalytic atoms that experience a reduction in charge density between GSs and TSs. Notably, in TS stabilization, the charge density of catalytic atoms is enhanced prior to enzyme–substrate binding; whereas in GS destabilization, the charge density of catalytic atoms is enhanced during the enzyme–substrate binding. Results show that TS stabilization and GS destabilization are not contradictory to each other and are consistent in reducing the ΔG^‡s of reactions. The full mechanism of enzyme catalysis includes the mechanism of reducing ΔG^‡ and the mechanism of enhancing atomic charge densities. Our findings may help resolve the debate between TS stabilization and GS destabilization and assist our understanding of catalysis and the design of artificial enzymes.

Transition state stabilization and ground state destabilization utilize the same molecular mechanism when lowering the free energy barriers (ΔG^‡s) of reactions, but differ in achieving the requirement for ΔG^‡ reduction.     

Solvent-Controlled Self-Assembled Oligopyrrolic Receptor

We report a fully organic pyridine-tetrapyrrolic U-shaped acyclic receptor 10, which prefers a supramolecular pseudo-macrocyclic dimeric structure (10)₂ in a less polar, non-coordinating solvent (e.g., CHCl₃). Conversely, when it is crystalized from a polar, coordinating solvent (e.g., N,N-dimethylformamide, DMF), it exhibited an infinite supramolecular one-dimensional (1D) “zig-zag” polymeric chain, as inferred from the single-crystal X-ray structures. This supramolecular system acts as a potential receptor for strong acids, e.g., p-toluenesulfonic acid (PTSA), methane sulfonic acid (MSA), H₂SO₄, HNO₃, and HCl, with a prominent colorimetric response from pale yellow to deep red. The receptor can easily be recovered from the organic solution of the host–guest complex by simple aqueous washing. It was observed that relatively stronger acids with pK_a < −1.92 in water were able to interact with the receptor, as inferred from ¹H NMR titration in tetrahydrofuran-d₈ (THF-d₈) and ultraviolet–visible (UV–vis) spectroscopic titrations in anhydrous THF at 298 K. Therefore, this new dynamic supramolecular receptor system may have potentiality in materials science research.     

Quantum Chemical Calculation of Conformations and Rotation Barriers of Functional Groups in Arylsulfonyl Halides

The semiempirical PM3 method is used to calculate the potential functions of internal rotation of the functional groups –SO₂Cl, –NO₂, –CH₃, –OCH₃, and –NH₂ of benzenesulfonyl halide molecules (PhSO₂Hal, Hal = F, Cl, Br, I) and twelve substituted derivatives of benzenesulfonyl chloride. Molecular conformations have been determined and internal rotation barriers of the functional groups have been calculated. For meta- and para-substituted benzenesulfonyl chlorides, the projection of the S–Hal bond is perpendicular to the plane of the benzene ring. The rotation barriers of the –SO₂Hal group of benzenesulfonyl halides increase in the series Hal = F, Cl, Br, I. The rotation barriers of the –SO₂Cl group of benzenesulfonyl chloride with meta- and para-substituents slightly increase with the electron-donor properties of the substituent. The rotation barriers of the functional groups of ortho-substituted benzenesulfonyl chlorides are 3 or 4 times as high as those of the meta- and para-isomers. For para-substituted benzenesulfonyl chlorides, the rotation barriers of the functional groups increase in the order –CH₃, –NO₂, –SO₂Cl, –OCH₃, –NH₂.     

Enhanced Adsorption of Sulfonamides by Attapulgite-Doped Biochar Prepared with Calcination

The extensive use of sulfonamides seriously threatens the safety and stability of the ecological environment. Developing green inexpensive and effective adsorbents is critically needed for the elimination of sulfonamides from wastewater. The non-modified biochar exhibited limited adsorption capacity for sulfonamides. In this study, the attapulgite-doped biochar adsorbent (ATP/BC) was produced from attapulgite and rice straw by calcination. Compared with non-modified biochar, the specific surface area of ATP/BC increased by 73.53–131.26%, and the average pore width of ATP/BC decreased 1.77–3.60 nm. The removal rates of sulfadiazine and sulfamethazine by ATP/BC were 98.63% and 98.24%, respectively, at the mass ratio of ATP to rice straw = 1:10, time = 4 h, dosage = 2 g∙L⁻¹, pH = 5, initial concentration = 1 mg∙L⁻¹, and temperature = 20 °C. A pseudo-second-order kinetic model (R² = 0.99) and the Freundlich isothermal model (R² = 0.99) well described the process of sulfonamide adsorption on ATP/BC. Thermodynamic calculations showed that the adsorption behavior of sulfonamides on the ATP/BC was an endothermic (ΔH > 0), random (ΔS > 0), spontaneous reaction (ΔG < 0) that was dominated by chemisorption (−20 kJ∙mol⁻¹ > ΔG). The potential adsorption mechanisms include electrostatic interaction, hydrogen bonding, π–π interaction, and Lewis acid–base interactions. This study provides an optional material to treat sulfonamides in wastewater and groundwater.     

A high-spin diradical dianion and its bridged chemically switchable single-molecule magnet

Triplet diradicals have attracted tremendous attention due to their promising application in organic spintronics, organic magnets and spin filters. However, very few examples of triplet diradicals with singlet–triplet energy gaps (ΔE_ST) over 0.59 kcal mol⁻¹ (298 K) have been reported to date. In this work, we first proved that the dianion of 2,7-di-tert-butyl-pyrene-4,5,9,10-tetraone (2,7-tBu₂-PTO) was a triplet ground state diradical in the magnesium complex 1 with a singlet–triplet energy gap ΔE_ST = 0.94 kcal mol⁻¹ (473 K). This is a rare example of stable diradicals with singlet–triplet energy gaps exceeding the thermal energy at room temperature (298 K). Moreover, the iron analog 2 containing the 2,7-tBu₂-PTO diradical dianion was isolated, which was the first single-molecule magnet bridged by a diradical dianion. When 2 was doubly reduced to the dianion salt 2K2, single-molecule magnetism was switched off, highlighting the importance of diradicals in single-molecule magnetism.

We report a triplet diradical dianion in magnesium complex with ΔE_ST = 0.94 kcal mol⁻¹ (473 K). Its iron analog is the first single-molecule magnet bridged by a diradical dianion, and the SMM property is switched off through two-electron reduction.     

Study on the Structure of a Mixed KCl and K2SO4 Aqueous Solution Using a Modified X-ray Scattering Device,Raman Spectroscopy,and Molecular Dynamics Simulation

The microstructure of a mixed KCl and K₂SO₄ aqueous solution was studied using X-ray scattering (XRS), Raman spectroscopy, and molecular dynamics simulation (MD). Reduced structure functions [F(Q)], reduced pair distribution functions [G(r)], Raman spectrum, and pair distribution functions (PDF) were obtained. The XRS results show that the main peak (r = 2.81 Å) of G(r) shifted to the right of the axis (r = 3.15 Å) with increased KCl and decreased K₂SO₄. The main peak was at r = 3.15 Å when the KCl concentration was 26.00% and the K₂SO₄ concentration was 0.00%. It is speculated that this phenomenon was caused by the main interaction changing, from K-O_W (r = 2.80 Å) and O_W-O_W (r = 2.80 Å), to Cl⁻-O_W (r = 3.14 Å) and K⁺-Cl⁻ (r = 3.15 Å). According to the trend of the hydrogen bond structure in the Raman spectrum, when the concentration of KCl was high and K₂SO₄ was low, the destruction of the tetrahedral hydrogen bond network in the solution was more serious. This shows that the destruction strength of the anion to the hydrogen bond network structure in solution was Cl⁻ > SO₄²⁻. In the MD simulations, the coordination number of O_W-O_W decreased with increasing KCl concentration, indicating that the tetrahedral hydrogen bond network was severely disrupted, which confirmed the results of the Raman spectroscopy. The hydration radius and coordination number of SO₄²⁻ in the mixed solution were larger than Cl⁻, thus revealing the reason why the solubility of KCl in water was greater than that of K₂SO₄ at room temperature.     

Gas-phase reactivity and molecular modeling studies on triply protonated dodecapeptides that contain four basic residues

Gas-phase deprotonation and hydrogen/deuterium (H/D) exchange reactions for ions from three model dodecapeptides were studied by Fourier transform ion cyclotron resonance mass spectrometry. Molecular dynamics calculations were employed to provide information on conformations and Coulomb energies. The peptides, (KGG)₄, (K₂G₄)₂, and K₄G₈, each contain four high basicity lysine residues and eight low basicity glycine residues; however, in the present work only three lysine residues were protonated. Proton transfer reactions with a series of reference amines revealed apparent gas-phase acidities in a narrow range of 207. 3–209. 6 kcal/mol, with deprotonation efficiencies following the order [K₄G₈+3H]³⁺ > [(KGG)₄+3H]³⁺ > [(K₂G₄)₂+3H]³⁺. The three ions also react similarly with d ₄-methanol: each exchanged a maximum of 23–25 of their 25 labile hydrogens, with the first 15–17 exchanges occurring at rate constants of (1. 6–2. 6) × 10^?11 cm³ molecule^?1 s^?1. The experimental results agree with molecular modeling findings of similar conformations and Coulomb energies for the three peptide ions. The [M+3H]³⁺ data are compared to data obtained previously in our laboratory for the “fully” protonated [M+4H]⁴⁺ (Zhang, X.; Ewing, N. P.; Cassady, C. J. Int. J. Mass Spectrom. Ion Phys., in press). For (KGG)₄ and (K₂G₄)₂, there is a marked difference in H/D exchange reactivity between 3+ ions and 4+ ions. The 4+ ions, which have diffuse conformations, slowly exchange only 14 hydrogens, whereas their more compact 3+ counterparts exchange 23–25 hydrogens at a 5-times greater rate. In contrast, the 3+ and 4+ ions of K₄G₈ have similar compact conformations and exchange reactivity. The results indicate that a multiply hydrogen-bonded intermediate between the deuterating reagent and the peptide ion is necessary for facile H/D exchange. The slower, incomplete H/D exchange of [(KGG)₄+4H]⁴⁺ and [(K₂G₄)₂+4H]⁴⁺ is attributed to the inability of their protonated lysine n-butylamino groups (which extend away from the peptide backbone) to form this intermediate.