多溴吩噻嗪系列化合物的稳定性和热力学性质的密度泛函理论研究

用Gaussian 03程序, 在B3LYP/6-31G*水平上全优化计算了吩噻嗪和135个多溴吩噻嗪系列化合物(PBPTHs)在298.15 K和101.3 kPa状态时的热力学参数. 设计等键反应, 计算了PBPTHs系列化合物的标准生成热( )和标准生成自由能( ). 同时研究了这些参数与溴原子的取代位置及取代数目(NPBS)之间的关系. 结果表明: 多溴吩噻嗪的热能校正值(Eth)、恒容热容( )、标准熵( )、标准焓( )以及标准自由能( )与NPBS之间有很强的相关性(r2≥0.998). 在相关方程中, 溴原子的取代个数对多溴代吩噻嗪热力学数值的大小有很大影响. 根据 的相对大小, 从理论上求得异构体的相对稳定性顺序.     

Studies of Thermodynamic Properties and Relative Stability of Polybrominated Xanthones by Density Functional Theory

The thermodynamic properties of xanthone(XTH) and 135 polybrominated xanthones(PBXTHs) in the standard state have been calculated at the B3LYP/6-31G* level using Gaussian 03 program.The isodesmic reactions were designed to calculate the standard enthalpy of formation(△fHθ) and standard free energy of formation(△fGθ) of PBXTH congeners.The relations of these thermodynamic parameters with the number and position of Br atom substitution(NPBS) were discussed,and it was found that there exist high correlation between thermodynamic parameters(entropy(Sθ),△fHθ and △fGθ) and NPBS.According to the relative magnitude of their △fGθ,the relative stability order of PBXTH congeners was theoretically proposed.The relative rate constants of formation reactions of PBXTH congeners were calculated,Moreover,the values of molar heat capacity at constant pressure(Cp,m) from 200 to 1000 K for PBXTH congeners were also calculated,and the temperature dependence relation of them was obtained,suggesting very good relationships between Cp,m and temperature(T,T-1 and T-2) for almost all PBXTH congeners.     

多氟代、多氯代和多溴代二苯并对二噁英化合物的一些性质的比较研究

采用密度泛函理论(DFT)方法, 在B3LYP/6-311G**和B3LYP/6-31G*两种水平上, 对76种多氟代二苯并对二噁英系列化合物(PFDDs)进行了几何构型的全优化, 并计算了各分子在298.15 K, 1.013×10⁵ Pa的标准状态下的热力学参数. 基组从6-31G*增大到6-311G**没有显著改变标准生成热(Δ_fH^?)、标准生成自由能(Δ_fG^?)和标准熵(S^?)数值. 根据B3LYP/6-311G**水平计算得到的Δ_fG^?的相对大小, 求得PFDDs同数目取代氟原子的各异构体的相对稳定性的顺序. 采用基团贡献法计算了多溴代二苯并对二噁英(PBDDs)、多氯代二苯并对二噁英(PCDDs)和PFDDs的辛醇-水分配系数(lg K_ow). 并将PFDDs的Δ_fH^?, Δ_fG^?, S^?和lg K_ow的计算结果与PBDDs和PCDDs的相关数值进行了比较. 同时, 计算了PFDDs各组异构体化合物的生成反应相对速率常数, 采用统计热力学程序计算了这些化合物在200至1800 K的恒压摩尔热容(C_p,m), 并用最小二乘法求得C_p,m与温度之间的相关方程, 发现C_p,m与T, T^－1和T^－2之间有着很好的相关性.     

多氯10-氧吩噁噻系列化合物的热力学性质及稳定性的密度泛函理论方法研究

采用Gaussian 03程序中的密度泛函理论(DFT)方法,在BHandHLYP/6-311G**水平上对135个多氯10-氧吩噁噻系列化合物(PCPTO)进行了全优化和振动分析计算,得到了各分子在298.15K,1.013×105Pa标准状态下的热力学参数.设计等键反应,计算了PCPTO系列化合物的标准生成热(△fH)和标准生成自由能(△fG),同时研究了这些参数与氯原子的取代位置及取代数目(NPCS)之间的关系.结果表明:熵(S),△fH,△fG与NPCS之间有很强的相关性(R2≥0.991).根据△fG的相对大小,从理论上求得异构体的相对稳定性.以Gaussian 03程序的输出文件为基础,采用统计热力学程序计算了PCPTO化合物在200至1000K的摩尔恒压热容(Cp,m),并用最小二乘法求得Cp,m与温度之间的相关方程,结果发现Cp,m与T,T-1和T-2之间有着很好的相关性(R2=1.000).     

多溴代二苯胺热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对209个多溴代二苯胺(PBDPA)系列化合物进行了全优化和振动分析计算, 得到各分子在298.15 K, 101.3 kPa标准状态下的热力学参数. 设计等键反应, 计算了PBDPA系列化合物的标准生成热(ΔfHÖ)和标准生成自由能(ΔfGÖ). 研究了热力学参数SÖ与溴原子的取代位置及取代数目(NPBS)之间的关系, 结果表明: PBDPA系列化合物的SÖ, ΔfHÖ和ΔfGÖ与NPBS之间有很强的相关性(R2≥0.984). 根据异构体标准生成自由能的相对大小, 从理论上求得异构体的相对稳定性. 以Gaussian 03程序的输出文件为基础, 采用统计热力学程序计算了PBDPA化合物在200 K至1000 K的摩尔恒压热容(Cp,m), 并用最小二乘法求得Cp,m与温度之间的相关方程, 发现Cp,m与T, T－1和T－2之间有着很好的相关性(R2＝1.000).     

多氯咔唑系列化合物的热力学性质的密度泛函理论研究

采用Gaussian 03程序中的密度泛函(DFT)方法, 在B3LYP/6-31G*水平上对135个多氯咔唑系列化合物(PCCZs)进行了全优化计算, 得到了298.15 K, 1.013×105 Pa标准状态下各分子的热力学性质. 设计等键反应, 计算了PCCZs系列化合物的标准生成热(ΔfHÖ)和标准生成自由能(ΔfGÖ), 研究了这些参数与氯原子的取代位置及取代数目(NPCS)之间的关系, 结果表明: 熵(SÖ), ΔfHÖ, ΔfGÖ与NPCS之间有很强的相关性. 并根据ΔfGÖ的相对大小, 从理论上求得异构体的相对稳定性的顺序. 此外, 以Gaussian 03程序的输出文件为基础, 采用统计热力学程序计算了PCCZs化合物在200至1800 K的摩尔恒压热容(Cp,m), 并用最小二乘法求得Cp,m与温度之间的相关方程, 发现Cp,m与T, T－1和T－2之间有着很好的相关性.     

多溴代二苯硫醚系列化合物的热力学性质和稳定性的理论研究

在B3LYP/6-31G*水平上对209个多溴代二苯硫醚(PBDS)系列化合物进行了全优化和振动分析计算,得到各分子在298.15K,1.013×105Pa标准状态下的热力学参数.研究了热力学参数S与溴原子的取代位置及取代数目(NPBS)之间的关系,结果表明:S与NPBS之间有很强的相关性(R2=0.993).设计等键反应,计算了PBDS系列化合物的标准生成热(△fH)和标准生成自由能(△fG).根据异构体标准生成自由能的相对大小,从理论上求得异构体的相对稳定性.以Gaussian03程序的输出文件为基础,采用统计热力学程序计算了PBDS化合物在200至1000K的摩尔恒压热容(Cp,m),并用最小二乘法求得Cp,m与温度之间的相关方程,发现Cp,m与T,T-1和T-2之间有着很好的相关性(R2=1.000).     

多氯二苯硫醚结构参数和热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对209个多氯二苯硫醚(PCDS)系列化合物进行了全优化计算, 得到各分子的结构参数和热力学参数. 研究了这些参数与氯原子在苯环各位置的取代数目和相互位置(N_PCS)之间的关系发现: 分子平均极化率(α)、焓(H $)、自由能(G $)、恒容热容( )和熵(S $)与N_PCS之间有很强的相关性, 相关性系数r²＞0.988, 分子体积(V_m)、最高占据轨道能(E_HOMO)和最低未占据轨道能(E_LUMO)与N_PCS也有较好的相关性, 相关性系数r²分别为0.949, 0.894和0.915. 设计等键反应, 计算了PCDS各异构体的标准生成热(Δ_fH $)和标准生成自由能(Δ_fG $). 根据异构体自由能的相对大小, 求得异构体的相对稳定性顺序.     

多氯代吩噁嗪热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对135个多氯代吩噁嗪(PCPXs)系列化合物进行了全优化和振动分析计算, 得到各分子在298.15 K, 1.013×105 Pa标准状态下的热力学性质. 设计等键反应, 计算了PCPXs系列化合物的标准生成热(Δf )和标准生成自由能(Δf ), 研究了这些参数与氯原子的取代位置及取代数目(NPCS)之间的关系, 结果表明: 熵( )、Δf , Δf 与NPCS之间有很强的相关性. 根据异构体标准生成自由能的相对大小, 从理论上求得异构体的相对稳定性. 以Gaussian 03程序的输出文件为基础, 采用统计热力学程序计算了PCPXs化合物在200 K至1800 K的摩尔恒压热容(Cp,m), 并用最小二乘法求得Cp,m与温度之间的相关方程, 发现Cp,m与T, T－1和T－2之间有着很好的相关性.     

Studies of Structural and Thermodynamic Properties for Polychlorinated Thianthrenes by Density Functional Theory

The structural and thermodynamic （PCTAs） in the ideal gas state at 298.15 K and 1.013 properties of 75 polychlorinated thianthrenes ×10^5 Pa have been calculated at the B3LYP/6- 31G＊ level using Gaussian 98 program. Based on the output data of Gaussian, the isodesmic reactions were designed to calculate standard enthalpy of formation （△fH^θ） and standard free energy of formation （△fH^θ） of PCTAs congeners. The relations of these thermodynamic parameters with the number and position of C1 atom substitution （Npcs） were discussed, and it was found that there exists high correlation between thermodynamic parameters （total energy （TE）, zero-point vibrational energy （ZPE）, thermal correction to energy （Eth）, heat capacity at constant volume （Cv^θ）, entropy （S^θ）, enthalpy （H^θ）, free energy （G^θ）, standard enthalpies of formation （△fH^θ） and standard Gibbs energies of formation （△fG^θ）） and Npcs. On the basis of the relative magnitude of their △fG^θ, the order of relative stability of PCTA congeners was theoretically proposed. In addition, the correlations between structural parameters and Npcs were also discussed. The good correlations were found between molecular average polarizability （α）, energy of the highest occupied molecular orbital （EHOMO）, molecular volume （Vm） and Npcs, and all R^2 values are larger than 0.95. Moreover, it was supposed that the isomer groups with higher toxicity should be Tri-CTA and TCTA.     

Theoretical Study on Thermodynamic Properties and Hydrophilicity of Polychorinated Phenothiazines （PCPTZs）

The thermodynamic properties of 135 polychlorinated phenothiazines (PCPTZs) in the standard state are calculated using a combination of quantum mechanical computations performed with the Gaussian 03 program at the B3LYP/6-311G** level, and their octanol-water partition coefficients (logKow) are calculated based on group contributions. The chlorine substitution pattern strongly influenced the thermodynamic properties and hydrophilicity of the compounds. The thermodynamic properties of congeners also depend on the chlorine substitution pattern. The effect of chlorine substitution pattern is quantitatively studied by considering the number and position of Cl atom substitution (NPCS). The results show that the NPCS model may be used to predict the thermodynamic properties and hydrophilicity for all 135 PCPTZ congeners.     

多氯联苯醚的结构参数和热力学性质的密度泛函理论研究

采用密度泛函理论(DFT)方法在B3LYP/6-31G*水平上对209个多氯联苯醚(PCDEs)系列化合物进行了全优化和振动分析计算, 得到各分子的结构参数和热力学性质, 并研究了这些参数与氯原子的取代位置及取代数目(N_PCS)之间的关系. 结果表明: 分子平均极化率(α)、焓(H^Ө)、自由能(G^Ө)、恒容热容( )和熵(S^Ө)与N_PCS之间有很强的相关性(相关性系数r²分别为0.9955, 1.0000, 1.0000, 0.9918, 0.9995), 分子体积(V_m)和最高占据轨道能(E_HOMO)与N_PCS也有较好的相关性, 相关性系数r²分别为0.9735和0.9362. 设计等键反应, 计算了PCDEs系列化合物的标准生成热(Δ_fH^Ө)和标准生成自由能(Δ_fG^Ө). 根据异构体自由能的相对大小, 从理论上求得异构体的相对稳定性顺序.     

Effect of Structure on Excess Partial Volumes and Deviation in Molar Viscosity of Some Aqueous-Ethylene Glycols Mono Alkyl Ether

The data obtained for density, viscosity, and dielectric constant are used for the study of the physical properties of 2-ethoxy ethanol-water mixtures. Density measurements showed the presence of contraction in the volume of the mixture and also in the partial molal volume of the components. Viscosity data provided supporting evidence of interaction between the two solvents. The dielectric data for the system were studied in terms of a deviation fraction, δD, representing the deviation from an ideal volume mixture. The results are also compared with the data obtained in the literature for water-2-methoxy ethanol and water-ethylene glycol mixtures.     

A Volumetric Study of Water–Decyltrimethylanimonium Bromide–Pentanol Ternary System from 25 to 130°C at 2 and 19 MPa

Density measurements on decyltrimethylammonium bromide (DeTAB)–water and pentanol (PentOH)–DeTAB–water systems as functions of both alcohol and surfactant m _S concentrations were carried out at 2 and 19 MPa from 25 to 130°C. From experimental data for the water–DeTAB binary system, the standard (infinite dilution) partial molar volumes, expansibilities, and compressibilities of DeTAB, and the corresponding properties in the micellar phase are calculated. The trends of the standard partial molar volumes of PentOH V _R ^o in DeTAB micellar solutions as functions of m _S reflect the transfer of PentOH from the aqueous to the micellar phase, except at 130°C and 19 MPa. On the basis of an equation previously used, the distribution constant of PentOH between the aqueous and the micellar phases and the standard partial molar volume of alcohol in the aqueous and the micellar phases are obtained from V _R ^o data. Comparisons with data for PentOH in dodecyltrimethylammonium bromide are made.