Thermodynamic study of sodium decyl sulfate solutions in the region the second critical micellization concentration: 1. Volumetric and heat capacity properties

Densitometry and precision adiabatic scanning calorimetry are used to reveal a number of volumetric and heat capacity properties of sodium decyl sulfate in the region of the second critical micelle concentration. Heat capacities are established in a wide temperature range. The coefficients of thermal expansion, apparent and partial mole expandabilities, volume, heat capacities, and excess partial mole heat capacities are calculated. The analysis of variations in these thermodynamic properties occurring upon variations in concentration and temperature makes it possible to identify the structural variations in sodium decyl sulfate micelles that are relevant to the transition of micelles from globular to cylindrical forms.     

Miscibility of sodium dodecyl sulfate and sodium decyl sulfate in the adsorbed film and micelle

The interfacial tension of the aqueous solution of sodium dodecyl sulfate (SDS) and sodium decyl sulfate (SDeS) mixture against hexane was measured as a function of the total molality and composition of the surfactant mixture at 298.15 K under atmospheric pressure. The compositions of adsorbed film and micelle were evaluated numerically by applying the thermodynamic relations to the experimental results. These results were shown in the form of the phase diagrams of adsorption and micelle formation and compared with those of the aqueous solution of sodium perfluorooctanoate (SPFO) and SDeS mixture. It was found that the diagrams of SDS and SDeS system have swollen cigar shapes and are quite different from those of SPFO and SDeS system which show non-ideal mixing both in the adsorbed film and micelle. This finding was attributed to the fact that the interaction between fluorocarbon and hydrocarbon chains is weaker than that between hydrocarbon chains.     

Effect of the nature of the counterion on the properties of anionic surfactants. 5. Self-association behavior and micellar properties of ammonium dodecyl sulfate

Micelles formed in water from ammonium dodecyl sulfate (AmDS) are characterized using time-resolved fluorescence quenching (TRFQ), electron paramagnetic resonance (EPR), conductivity, Krafft temperature, and density measurements. TRFQ was used to measure the aggregation number, N, and the quenching rate constant of pyrene by dodecylpyridinium chloride, k(Q). N depends only on the concentration (C(aq)) of ammonium ions in the aqueous phase whether these counterions are derived from the surfactant alone or from the surfactant plus added ammonium chloride as follows: N = N0(C(aq)/cmc0)(gamma), where N0 is the aggregation number at the critical micelle concentration in the absence of added salt, cmc0, and is equal to 77, 70, and 61 at 16, 25, and 35 degrees C, respectively. The exponent gamma = 0.22 is independent of temperature in the range 16 to 35 degrees C. The fact that N depends only on C(aq) permits the determination of the micelle ionization degree (alpha) by employing various experimental approaches to exploit a recent suggestion (J. Phys. Chem. B 2001, 105, 6798) that N depends only on C(aq). Utilizing various combinations of salt and surfactant, values of alpha were obtained by finding common curves as a function of C(aq) of the following experimental results: the Krafft temperature, N, k(Q), the microviscosity of the Stern layer determined from the rotational correlation time of a spin probe, 5-doxyl stearic acid methyl ester, and the spin-probe sensed hydration of the micelle surface. The values of alpha, determined from applying the aggregation number-based definition of alpha to all of these quantities, were within experimental uncertainty of the values alpha = 0.19, 0.20, and 0.21 derived from conductivity measurements at 16, 25, and 35 degrees C, respectively. The volume fraction of the Stern layer occupied by water decreases as N increases. For AmDS micelles, both the hydration and its decrease are predicted by a simple theory of micelle hydration by fixing the parameters of the theory for sodium dodecyl sulfate and employing no further adjustable parameters. For a given value of N, the hydration decreases as the temperature increases.     

Thermodynamic study of sodium decyl sulfate solutions in the region of second critical micelle concentration: 2. Thermodynamic functions of polymorphic micellar transition and components of its Gibbs energy

Temperature dependences of the thermodynamic functions of polymorphic micellar transition in the region of second critical micelle concentration are calculated based on data on heat capacities of sodium decyl sulfate solutions obtained previously by scanning calorimetry. Equilibrium constants and fractions of surfactant molecules aggregated into spheroidal and cylindrical micelles are calculated. Using the models of the ellipsoid of revolution and cylinder, components of the equilibrium Gibbs energy of intermicellar transition are calculated.     

Effect of equimolar salt to decyltrimethylammonium decyl sulfate on vesicle formation and surface adsorption

The aqueous solution of mixture of sodium decyl sulfate (SDeS) and decyltrimethylammonium bromide (DeTAB) has been found to form equilibrium multilamellar vesicles (MLV) spontaneously. We measured the surface tension of the aqueous solution of 1:1 mixture of SDeS and DeTAB as a function of temperature T at various molalities m under atmospheric pressure. The surface density, the entropy of adsorption and the entropy of vesicle formation are evaluated and compared with those of the decyltrimethylammonium decyl sulfate (DeTADeS) aqueous solution system to investigate the role of small counterions in the mechanism of equilibrium vesicle formation. The saturated surface density Gamma (H,C ) vs T curve of the SDeS/DeTAB system sits below that of the DeTADeS system. Therefore, sodium and bromide ions are negatively adsorbed and nevertheless, they neutralize the electric charge of the decyl sulfate ion DeS(-) and the decyltrimethylammonium ion DeTA(+) to some extent to weaken the electrostatic attraction between the polar head groups in the adsorbed film. The net surfactant concentration required for vesicle formation was larger in the SDeS/DeTAB system. Hence, the electrostatic attraction between the polar head groups of the surfactant ions which is one of the major driving forces for vesicle formation is weakened by the presence of the counterions Na(+) and Br(-). Small but distinct changes in the surface density and the entropies of MLV formation of the SDeS/DeTAB system from those of the DeTADeS system were also found.     

The gibbs energy,chemical potential,and state parameters of the surface of an ionic micelle in the form of an ellipsoid of revolution

A molecular-thermodynamic model of an ionic micelle in the form of an ellipsoid of revolution was suggested. Equations for the chemical potential of an ellipsoidal micelle, the work of transfer of ions from solution volume into the micelle, and the state parameters of the surface of the micelle (fraction of free hydrophobic surface, surface tension coefficient, and surface charge density) were obtained. The Gibbs energy, chemical potential, work of transfer, and state parameters of an ellipsoidal micelle were determined as depending on the form factor of the corresponding ellipsoid. The model was verified for the example of sodium decyl sulfate micelles. The calculated parameters were close to the thermochemical data on the asymmetrization of spherical micelles in a solution of sodium decyl sulfate. The equilibrium ion-micellar solution composition was estimated.     

Characteristics of wormlike pentaoxyethylene decyl ether C(10)E(5) micelles containing n-dodecanol

The wormlike micelles formed with the surfactant pentaoxyethylene decyl ether C10E5 containing n-dodecanol were characterized by static (SLS) and dynamic light scattering (DLS) experiments. The SLS results have been analyzed with the aid of the light scattering theory for micelle solutions, thereby yielding the molar mass Mw(c) as a function of concentration c along with the cross-sectional diameter d of the micelle. The observed Kc/DeltaR0 as a function of c and the hydrodynamic radius RH as functions of Mw have been well described by the theories for the wormlike spherocylinder model. It has also been demonstrated that the apparent hydrodynamic radius RH,app(c) as a function of c is well described by a fuzzy cylinder theory which takes into account the hydrodynamic and direct collision interactions among micelles. Our previous results for the hexaoxyethylene dodecyl ether C12E6 micelles containing n-dodecanol were reanalyzed in the same scheme. It has been found that the micellar length increases with increasing concentration c or with raising temperature T irrespective of the composition of the C10E5 + n-dodecanol and C12E6 + n-dodecanol systems. The length of the micelles at fixed c and T steeply increases with increasing weight fraction wd of n-dodecanol in both systems. The growth of the micelles accompanies the increase of the cross-sectional diameter d of the micelles and the results that the surfactant molecules are more densely assembled with increasing wd in order to keep n-dodecanol molecules inside the micelles.     

Molecular dynamics simulation of interactions between a sodium dodecyl sulfate micelle and a poly(ethylene oxide) polymer

We have performed atomistic molecular dynamics simulations of an anionic sodium dodecyl sulfate (SDS) micelle and a nonionic poly(ethylene oxide) (PEO) polymer in aqueous solution. The micelle consisted of 60 surfactant molecules, and the polymer chain lengths varied from 20 to 40 monomers. The force field parameters for PEO were adjusted by using 1,2-dimethoxymethane (DME) as a model compound and matching its hydration enthalpy and conformational behavior to experiment. Excellent agreement with previous experimental and simulation work was obtained through these modifications. The simulated scaling behavior of the PEO radius of gyration was also in close agreement with experimental results. The SDS-PEO simulations show that the polymer resides on the micelle surface and at the hydrocarbon-water interface, leading to a selective reduction in the hydrophobic contribution to the solvent-accessible surface area of the micelle. The association is mainly driven by hydrophobic interactions between the polymer and surfactant tails, while the interaction between the polymer and sulfate headgroups on the micelle surface is weak. The 40-monomer chain is mostly wrapped around the micelle, and nearly 90% of the monomers are adsorbed at low PEO concentration. Simulations were also performed with multiple 20-monomer chains, and gradual addition of polymer indicates that about 120 monomers are required to saturate the micelle surface. The stoichiometry of the resulting complex is in close agreement with experimental results, and the commonly accepted "beaded necklace" structure of the SDS-PEO complex is recovered by our simulations.     

Solubility of ethylene in aqueous solution of sodium dodecyl sulfate at ambient temperature and near the hydrate formation region

The solubility of ethylene in aqueous solutions of sodium dodecyl sulfate (SDS) at different concentrations was measured at temperature 298.2 K and near the hydrate formation region. The effect of SDS on the gas solubility was studied and the solubilities of ethylene in a single micelle under different conditions were evaluated. It was found that the micelle solubilization was obvious, especially in the region near hydrate formation conditions. The CMC of SDS solution was also evaluated based on the solubility vs SDS concentration curves and it was found that it decreased with decreasing temperature.     

Thermodynamics of Micelle Asymmetrization in Aqueous Sodium Decyl Sulfate Solution

The process of asymmetrization of spherical micelles in an aqueous sodium decyl sulfate solution is studied by scanning calorimetry. This process represents the intermicellar phase transition with an equilibrium temperature of 300 K occurring at a sodium decyl sulfate concentration of 0.12 mol/kg. The partial molar heat capacities of sodium decyl sulfate in a solution are determined and the thermodynamic functions of the rearrangement of micelles and their temperature dependences are calculated. The regions of the thermodynamic stability of solutions that contain spherical and nonspherical micelles, the former being predominant, are revealed. Equilibrium constants of the process and fractions of surfactant aggregated into spherical and nonspherical micelles are calculated for the model of monomolecular reversible reaction. For nonspherical micelles, the shape of the ellipsoid of revolution is proposed.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

Investigating the interaction of crystal violet probe molecules on sodium dodecyl sulfate micelles with hyper-Rayleigh scattering

We report the use of the nonlinear optical technique of hyper-Rayleigh scattering to investigate the interaction of the cationic probe molecule crystal violet with micelles of sodium dodecyl sulfate. An absolute value of (847 +/- 80) x 10(-30) esu is measured at the fundamental wavelength of 870 nm for the molecular hyperpolarizability of crystal violet free in pure aqueous solutions. In aqueous solutions of sodium dodecyl sulfate, above and below the critical micelle concentration, the measured hyperpolarizability of crystal violet is weaker than in the solution free of sodium dodecyl sulfate. From the comparison with linear optical photoabsorption spectroscopy data, this difference is attributed to electrostatic interactions between the cationic crystal violet molecules and the negatively charged sodium dodecyl sulfate surfactant molecules present in excess. Polarization resolved hyper-Rayleigh scattering measurements are then performed to show that, below and above the critical micelle concentration, crystal violet molecules also undergo symmetry changes upon interaction with sodium dodecyl sulfate. Above the critical micelle concentration, the minimum fraction of micelles interacting with at least one CV molecule is estimated. For instance, for a crystal violet aqueous concentration of 150 microM, this fraction is larger than 7%.     

Electrochemical behavior of decyl mercuric halides at mercury cathodes in dimethylformamide

Polarograms for decyl mercuric halides in dimethylformamide containing tetraalkylammonium perchlorates exhibit two waves. When large-scale electrolyses of decyl mercuric halides are performed at potentials corresponding to the first polarographic wave, the couldometric n value is unity and didecylmercury is obtained in quantitative yield; electrolyses carried out at potentials on the plateau of the second polarographic wave afford only decane and the n value is essentially 2. Double-potential-step chronocoulometry and staircase voltammetry indicate that, at potentials corresponding to the first polarographic wave, the decyl mercuric halide (which is itself adsorbed onto mercury to the extent of less than a monolayer) undergoes reversible one-electron reduction to adsorbed decyl mercury radicals and to adsorbed decyl mercury radical “polymer”; the adsorbed radicals have a lifetime of approximately 10^?3s and disproportionate into didecylmercury and elemental mercury. In the presence of electrolytically released halide ion, the adsorbed radicals are reoxidized to the decyl mercuric halide; alternately, the adsorbed species are reoxidized to decyl mercury cations at a potential approximately 600 mV more positive than that required for reoxidation to the decyl mercuric halide. At potentials corresponding to the second polarographic wave, reduction of decyl mercuric halides is an irreversible process producing decyl carbanions which are protonated by traces of water in the solvent to give decane.     

Solubility measurement of methane in aqueous solution of sodium dodecyl sulfate at ambient temperature and near hydrate conditions

Solubility data of methane in aqueous solutions of sodium dodecyl sulfate (SDS) with different concentrations were measured at ambient temperature and near hydrate conditions. The critical micelle concentration (CMC) and the number of methane molecules dissolved in each micelle of the methane + water + SDS system were calculated and compared with those of the ethylene + water + SDS system. The results demonstrated that the micelles could be formed in the SDS concentration range where an efficient promotion effect on hydrate formation was previously reported; the micelle solubilization to methane molecules was remarkable near hydrate conditions, and the ethylene molecules could be solubilized in micelles in preference to methane molecules.     

用SDS—荧光法监测丹皮酚在兔血浆中血药浓度的代谢变化

本文利用胶束荧光法作为血药浓度变化的监测手段，选用十二烷基硫酸钠为胶束试剂，在本文设计的实验条件下，经连续２４ｈ的监测，以丹皮酚浓度对时间作图，绘制药时曲线，效果良好。     

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: a conductometric study

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.     

Effect of N-glycinylmaleamic acid on microstructural characteristics and solubilization properties of sodium dodecyl sulfate micellar assemblies

The cosurfactant activity of N-glycinylmaleamic acid (NGMA) in sodium dodecyl sulfate (SDS) micelles has been demonstrated. The complementary techniques of electron spin resonance (ESR) and fluorescence spectroscopy have been used to draw information on hydration index (H), microviscosity (eta), and aggregation number (N) of micellar assemblies. The estimate of the critical micelle concentration of SDS in the presence of NGMA suggests a synergistic effect of NGMA. The enhanced solubilization of butyl propionate in the presence of NGMA in SDS micelles is explained on the basis of availability of larger interfacial area calculated from a simple spherical geometric model, combined with a low hydrophilicity index as estimated from ESR. Thus, addition of NGMA contributes to an increase of about 50% in ratio of area of polar shell (AP)/volume of hydration (Vh) ratio. The decrease in H accompanied by a decrease in eta with the incorporation of butyl propionate probably arises from solubilization of a butyl component inside the core with the adsorption of propionate ester on the interface.     

吖啶橙染料在十二烷基硫酸钠溶液中电子光谱的研究

报导了以吖啶橙染料为探针, 研究胶束在十二烷基硫酸钠溶液中的形成过程, 结果指出在这一过程右存在着予胶束形成的步骤, 同时还发现, 当十二烷基硫酸钠表面活性剂溶液的浓度增加到临界胶束浓度值时, 胶束将以单予胶束粒子为基准而生成.     

Diffusion of sodium dodecyl sulfate micelles in agarose gels

The gradient diffusion of ionic sodium dodecyl sulfate micelles in agarose gel was investigated at moderate concentrations above the CMC. Of particular interest were the effects of micelle, gel, and sodium chloride concentration on the micelle diffusivity. Holographic interferometry was used to measure the gradient diffusion coefficient at three sodium chloride concentrations (0, 0.03, 0.10 M), three gel concentrations (0, 1, 2 wt%), and several surfactant concentrations. Time-resolved fluorescence quenching was used to measure aggregation numbers both in solution and gel. The micelle diffusivity increased linearly with surfactant concentration at the two larger sodium chloride concentrations and all gel concentrations. In general, the strength of this effect increased with decreasing sodium chloride concentration and increased with gel concentration. This behavior is evidence of decreasing micelle-micelle electrostatic interactions with increasing sodium chloride concentrations, and increasing excluded volume effects and hydrodynamic screening with increasing gel concentration, respectively. The only exception was at 0.1M sodium chloride and 2 wt% agarose, which showed a slight reduction in the slope compared to 1 wt% agarose. It was found that the concentration effect is quite strong for charged solutes: at a NaCl concentration of 0.03 M in a 2% agarose gel, in a solution with 3% SDS micelles by volume, the micelle diffusion coefficient is doubled relative to its value in the same gel at infinite dilution. The extrapolated, infinite-dilution diffusion coefficients and the rate at which the micelle diffusivity increased with surfactant concentration were compared with predictions of previously published theories in which the micelles are treated as charged, colloidal spheres and the gel as a Brinkman medium. The experimental data and theoretical predictions were in good agreement.     

Effect of europium(III) chloride on the aggregation behavior of sodium dodecyl sulfate

The effect of EuCl3 on the aggregation processes of sodium dodecyl sulfate was investigated. Electrical conductivity data, combined with Eu(III) luminescence measurements, suggest that the formation of micelles involving EuCl3 and SDS occurs at low SDS concentration; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of EuCl3 to SDS concentration at values below the critical micelle concentration of the pure surfactant results in a much higher light scattering than that found just with SDS micelles. It was also found that the Eu(III)/DS- complexes are formed with a binding ratio which varies between 20 and 4, depending on the initial concentration of Eu(III). As the concentration increases, turbidity occurs initially, but solutions become clear subsequently. In contrast to the behavior of SDS in the presence of aluminum(III), no flocculation was observed. From the analysis of electrical conductivity data and comparison with other systems, it is suggested that growth of aggregates happens, probably with formation of nonspherical systems. At the highest concentrations these may involve just Eu(III) and DS- ions. The effect of temperature on the SDS micellization process was studied. The calculated free energy of SDS micellization is not dependent on the initial EuCl3 but is dependent on the final balance between the presence of counterions in solution (ionic strength) and the temperature.