Field-induced π-polarization in barrelene derivatives: a computational study based on structural variation

Barrelene, H–C(CH=CH)₃C–H, is an unsaturated polycyclic hydrocarbon containing three isolated double bonds in a non-planar arrangement. We have studied the transmission of field effects through the barrelene framework by analyzing the small structural changes occurring in the phenyl group of many Ph–C(CH=CH)₃C–X molecules, where X is a variable substituent. Molecular geometries have been determined by quantum chemical calculations at the HF/6-31G* and B3LYP/6-311++G** levels of theory. Comparison with the results obtained for the corresponding saturated molecules, the bicyclo[2.2.2]octane derivatives Ph–C(CH₂–CH₂)₃C–X, reveals a small, but significant, field-induced π-polarization of the barrelene cage, especially when the remote substituent is a charged group. Additional evidence of π-polarization is obtained by comparing the electric dipole moments of the two sets of uncharged molecules. The structural variation of the barrelene cage caused by the variable substituent in Ph–C(CH=CH)₃C–X molecules has also been investigated. It is much larger than that of the phenyl group and depends primarily on the electronegativity of the substituent. Particularly pronounced is the concerted variation of the non-bonded distance between the bridgehead carbons of the cage, r(C···C) ₁ ^BARR , and the average of the three C–C–C angles at the cage carbon bonded to the variable substituent, α ₁ ^BARR . A scattergram of r(C···C) ₁ ^BARR versus the corresponding parameter for bicyclo[2.2.2]octane derivatives, r(C···C) ₁ ^BCO , shows that the variation of r(C···C) ₁ ^BARR becomes gradually less pronounced than that of r(C···C) ₁ ^BCO as the electronegativity of the substituent increases.     

New method for calculating the moments of thermally averaged densities of distribution of internuclear distances in polyatomic molecules using the Bloch integral equation

A convenient method is suggested for calculating thermally averaged powers of the normal vibrational coordinates Q _i by iteratively solving the Bloch integral equation with an anharmonic function of potential energy using multidimensional Hermite polynomials. Analytical formulas of the first approximation regarding anharmonicity constant have been obtained for the following moments of thermally averaged density: 〈Q ₁〉, 〈 Q ₁ ² 〉, 〈Q ₁ Q ₂〉, 〈Q ₁ ³ 〉 〈Q ₁ ³ 〉, 〈Q ₁ Q ₂ Q ₃〉, 〈Q ₁ ⁴ 〉, 〈Q ₁ ² Q ₂ ² 〉, 〈Q ₁ Q _2/3〉, 〈Q ₁ Q ₂ Q ₃ ² 〉, 〈 Q 1 Q ₂ Q ₃ Q ₄〉.     

Stability of diammine and chloroammine gold(I) complexes in aqueous solution

The substitution equilibria AuCl ₂ ^? + iNH ₄ ⁺ = Au(NH₃)_iCl_{2 ? i} + iCl^? + iH⁺, β _i ^* . were studied pH-metrically at 25°C and I = 1 mol/L (NaCl) in aqueous solution. It was found that logβ ₁ ^* = ?5.10±0.15 and logβ ₂ ^* = ?10.25±0.10. For equilibrium AuNH₃Cl_solid = AuNH₃Cl, log K _s = ?3.1±0.3. Taking into account the protonation constants of ammonia (log K _H = 9.40), the obtained results show that for equilibria AuCl ₂ ^? + iNH₃ = Au(NH₃)_iCl_{2 ? i} + iCl^?, logβ₁ = 4.3±0.2, and logβ₂ = 8.55±0.15. The standard potentials E ₀ ^1/0 of AuNH₃Cl⁰ and Au(NH₃) ₂ ⁺ species are equal to 0.90±0.02 and 0.64±0.01 V, respectively.     

Solute–solvent interactions in 2,4-dihydroxyacetophenone isonicotinoylhydrazone solutions in N,N-dimethylformamide and dimethyl sulfoxide at 298–313 K on ultrasonic and viscometric data

The speed of sound (u), density (ρ), and viscosity (η) of 2,4-dihydroxyacetophenone isonicotinoylhydrazone (DHAIH) have been measured in N,N-dimethyl formamide and dimethyl sulfoxide at equidistance temperatures 298.15, 303.15, 308.15, and 313.15 K. These data were used to calculate some important ultrasonic and thermodynamic parameters such as apparent molar volume (V _{? s} ^st ), apparent molar compressibility (K _?), partial molar volume (V _? ⁰ ) and partial molar compressibility (K _? ⁰ ), were estimated by using the values of (V _? ⁰ ) and (K _?), at infinite dilution. Partial molar expansion at infinite dilution, (? _E ⁰ ) has also been calculated from temperature dependence of partial molar volume V _? ⁰ . The viscosity data have been analyzed using the Jones–Dole equation, and the viscosity, B coefficients are calculated. The activation free energy has been calculated from B coefficients and partial molar volume data. The results have been discussed in the term of solute–solvent interaction occurring in solutions and it was found that DHAIH acts as a structure maker in present systems.     

Investigation of Chloride Ion Substitution Equilibria in AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> with Ethylenediamine and 1,3-Diaminopropane Using Capillary Zone Electrophoresis

Substitution of chloride ions in AuCl ₄ ^? with ethylenediamine (en) and propylenediamine (tn) is studied by capillary zone electrophoresis at I = 0.05 M and T = 25°C. The substitution constants are determined: AuenCl ₂ ⁺ + en = Auen ₂ ³⁺ + 2Cl^–, logK₂ = 10.4; AuCl ₄ ^? + tn = AutnCl ₂ ⁺ + 2Cl^–, logK₁ = 16.1; AutnCl ₂ ⁺ + tn = Autn³⁺₂ + 2Cl^–, logK₂ = 12.0.     

Solution Thermodynamics of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Superscript>/</Superscript>-Ethylenebis-(salicylideneiminato)-diaquochromium(III) Chloride in Aqueous Dimethylsulphoxide

The densities, viscosities and refractive indices of N,N ^/-ethylene-bis(salicylideneiminato)-diaquochromium(III) chloride, [Cr(salen)(H₂O)₂]Cl, in aqueous dimethylsulfoxide (DMSO) with different mass fractions (w ₂ = 0.20, 0.40, 0.60, 0.80 and 1.00) of DMSO were determined at 298.15, 308.15 and 318.15 K under atmospheric pressure. From measured densities, viscosities and refractive indices the apparent molar volumes (V _φ ), standard partial molar volume (V _φ ⁰ ), the slope (S _V ^* ), standard isobaric partial molar expansibility (φ _E ⁰ ) and its temperature dependence (?φ _E ⁰ /?T) _p , the viscosity B-coefficient, its temperature dependence (?B/?T), solvation number (S _n ) and apparent molar refractivity (R _D ^φ ), etc., were calculated and discussed on the basis of ion–ion and ion–solvent interactions. These results revealed that the solutions are characterized by ion–solvent interactions rather than by ion–ion interactions and the complex behaves as a long range structure maker. Thermodynamics of viscous flow was discussed in terms of transition state theory.     

Substituted benzotriazoles as inhibitors of copper corrosion in borate buffer solutions

The adsorption of substituted 1,2,3-benzotriazoles (R-BTAs) onto copper is measured via ellipsometry in a pure borate buffer (pH 7.4) and satisfactorily described by Temkin’s isotherm. The adsorption free energy (?ΔG _a ⁰ ) values of these azoles are determined. The (?ΔG _a ⁰ ) values are found to rise as their hydrophobicity, characterized by the logarithm of the partition coefficient of a substituted BTA in a model octanol–water system (logP), grows. The minimum concentration sufficient for the spontaneous passivation of copper (C _min) and a shift in the potential of local copper depassivation with chlorides (E _pt) after an azole is added to the solution (i.e., ΔE = E _pt ⁱⁿ ? E _pt ^backgr characterizing the ability of its adsorption to stabilize passivation) are determined in the same solution containing a corrosion additive (0.01М NaCl) for each azole under study. Both criteria of the passivating properties of azoles (logC _min and ΔE) are shown to correlate linearly with logP, testifying to the role played by surface activity of this family of organic inhibitors in protecting copper in an aqueous solution.     

Thermal deformation thermodynamics of a smectite mineral

A method has been purposed to calculate some of the thermodynamic quantities for the thermal deformation of a smectite without using any basic thermodynamic data. The Hanç?l? (Keskin, Ankara, Turkey) bentonite containing a smectite of 88% by volume was taken as material. Thermogravimetric (TG) and differential thermal analysis (DTA) curves of the sample were obtained. Bentonite samples were heated at various temperatures between 25–900°C for the sufficient time (2 h) until to establish the thermal deformation equilibrium.Cation-exchange capacity (CEC) of heated samples was determined by using the methylene blue standard method. The CEC was used as a variable of the equilibrium. An arbitrary equilibrium constant (K _a) was defined similar to chemical equilibrium constant and calculated for each temperature by using the corresponding CEC-value. The arbitrary changes in Gibbs energy (ΔG _a ⁰ ) were calculated from K _a-values. The real change in enthalpy (ΔH ⁰) and entropy (ΔS ⁰) was calculated from the slopes of the lnK vs. 1/T and ΔG vs. T plots, respectively. The real changes in Gibbs energy (ΔG ⁰) and real equilibrium constant (K) were calculated by using the ΔH ⁰ and ΔS ⁰ values. The results at the two different temperature intervals are summarized as below: ΔG ₁ ⁰ =ΔH ₁ ⁰ ?ΔS ₁ ⁰ T=?RTlnK ₁=47000?53t, (200–450°C), and ΔG ₂ ⁰ =ΔH ₂ ⁰ -ΔS ₂ ⁰ T=?RTlnK ₂=132000?164T, (500–800°C).     

Relationship between the hydrogen bridge length and proton position in it

By means of the formula \(e^{ - ((r^{XH} - r_0^{XH} )/b^{XHX} )^{5/3} } + e^{ - ((r^{YH} - r_0^{YH} )/b^{YHY} )^{5/3} } = 1\) that characterizes the correlation between the parameters of XH?Y linear fragments (r ₀ ^XH , r ₀ ^YH are the bond lengths in free molecules, b ^XHX, b ^YHY are the dimensional coefficients) r ^XX(r ^XH) and r ^XY(r ^YH) dependences are obtained. Given the length of a hydrogen bridge formed by O, N, and F atoms, they enable us to find the proton position in the bridge. The definition “a quasi-symmetric hydrogen bond,” based on the invariance of the r ^XX distance when the proton shifts by 0.1 Å, is established to be applicable to OHO, FHF, NHN, and ClHCl fragments. It is shown that the hydrogen bridge length remains almost constant (exceeds the minimum length by no more than 0.1 Å) if its bond orders are above 0.1. Here the displacement of the central proton can reach 0.2–0.3 Å.     

Prediction of changes in the heat capacity of the liquid–vapor phase transition based on modified Randič indices. Alkanes and oxygen-containing compounds

The work proposes a method to predict changes in the heat capacity of the liquid—vapor phase transition Δ _l ^g Ср ⁰ (298.2) based on modified Randi? indices for alkanes and acyclic oxygen-containing compounds: alcohols, aldehydes, ketones, ethers, and esters. Based on the obtained Δ _l ^g Ср ⁰ (298.2) values heat capacities in the liquid phase Cp _liq ⁰ (298.2) are calculated for the compounds under study.     

Reduction kinetics of glycinate complexes of palladium(II) on a dropping-mercury electrode in acid perchlorate solutions

Polarograms for the reduction of glycinate complexes of palladium(II) (5 × 10^?5 M) are obtained in equilibrium solutions of pH 0.8–3.0 with different protonated-glycine concentrations c _Hgly (supporting electrolyte, 0.5 M NaClO₄). It is established that the irreversible wave of reduction of complexes Pd(gly)₂ corresponds to the diffusion limiting current I _d ⁽²⁾ . A similar wave at pH 1.5 and c _Hgly = 0.005 M, as well as at pH 1.0 and c _Hgly = 0.05–0.5 M is preceded by the diffusion limiting current I _d ⁽¹⁾ . Values of the I _d ⁽²⁾ /I _d ⁽¹⁾ ratio are close to the ratio between equilibrium concentrations of Pd(gly)₂] and [Pdgly⁺], calculated using the step stability constant for Pd(gly)₂. This fact testifies to the reduction of complexes Pdgly⁺ in the vicinity of I _d ⁽¹⁾ and complexes Pd(gly)₂, in the vicinity of I _d ⁽²⁾ . At pH 0.8–1.2 and [H₂gly⁺] = 1 × 10^?4 to 5 × 10^?3 there is observed the diffusion-kinetic limiting current of the first wave I ₁ ⁽¹⁾ , which increases with increasing [H⁺] and decreasing [H₂gly⁺]. The nature of the slow preceding chemical stage that occurs during the reduction of complexes Pdgly⁺ is discussed.     

Molecular structure and conformation of nitrobenzene reinvestigated by combined analysis of gas-phase electron diffraction,rotational constants,and theoretical calculations

The molecular structure and conformation of nitrobenzene has been reinvestigated by gas-phase electron diffraction (GED), combined analysis of GED and microwave (MW) spectroscopic data, and quantum chemical calculations. The equilibrium r _e structure of nitrobenzene was determined by a joint analysis of the GED data and rotational constants taken from the literature. The necessary anharmonic vibrational corrections to the internuclear distances (r _e ? r _a) and to rotational constants (B _e ⁽ⁱ⁾  ? B ₀ ⁽ⁱ⁾ ) were calculated from the B3LYP/cc-pVTZ quadratic and cubic force fields. A combined analysis of GED and MW data led to following structural parameters (r _e) of planar nitrobenzene (the total estimated uncertainties are in parentheses): r(C–C)_av = 1.391(3) Å, r(C–N) = 1.468(4) Å, r(N–O) = 1.223(2) Å, r(C–H)_av = 1.071(3) Å, \({\angle}\)C2–C1–C6 = 123.5(6)°, \({\angle}\)C1–C2–C3 = 117.8(3)°, \({\angle}\)C2–C3–C4 = 120.3(3)°, \({\angle}\)C3–C4–C5 = 120.5(6)°, \({\angle}\)C–C–N = 118.2(3)°, \({\angle}\)C–N–O = 117.9(2)°, \({\angle}\)O–N–O = 124.2(4)°, \({\angle}\)(C–C–H)_av = 120.6(20)°. These structural parameters reproduce the experimental B ₀ ⁽ⁱ⁾ values within 0.05 MHz. The experimental results are in good agreement with the theoretical calculations. The barrier height to internal rotation of nitro group, 4.1±1.0 kcal/mol, was estimated from the GED analysis using a dynamic model. The equilibrium structure was also calculated using the experimental rotational constants for nitrobenzene isotopomers and theoretical rotation–vibration interaction constants.     

Molecular and ionic sublimation of neodymium tribromide polycrystals and single crystals

The molecular and ionic sublimation of polycrystals and single crystals under Knudsen effusion and Langmuir evaporation conditions is reported. In both sublimation regimes, the sublimation product at 780–1050 K contains neodymium tribromide monomer and dimer molecules, as well as the negative ions NdBr ₄ ^? , Nd₂Br ₇ ^? , and Br^?. The dimer-to-monomer flux ratio j(Nd₂Br₆)/j(NdBr₃)is larger in the molecular beam coming out of the effusion hole, while the ratio of the sublimation fluxes of the negative ions, j(Nd₂Br ₇ ^? )/j(NdBr ₄ ^? ), is independent of the sublimation conditions. The partial pressures of the neutral components of the vapor have been determined, and the enthalpies and activation energies of sublimation of neodymium tribromide as monomer and dimer molecules and NdBr ₄ ^? and Nd₂Br ₇ ^? ions have been calculated. The equilibrium constants of ion-molecule reactions have been measured, and the enthalpies of these reactions have been determined. Based on these data, values of the thermodynamic properties Δ _s H ⁰(298.15) and Δ _f H ⁰(298.15) are recommended for the monomer and dimer molecules and the NdBr ₄ ^? and Nd₂Br ₇ ^? ions.     

The dynamics of nonadiabatic transitions in collisions between the I<Subscript>2</Subscript>(<Emphasis Type="Italic">E</Emphasis>) and I<Subscript>2</Subscript>(<Emphasis Type="Italic">X</Emphasis>) molecules

The paper presents the results of a theoretical study of the dynamics of nonadiabatic transitions between the ion-pair states E0 _g ⁺ and D0 _u ⁺ of the I₂ molecule induced by collisions with the I₂ molecule in the ground electronic state X0 _g ⁺ . The potential energy surfaces and diabatic coupling matrix elements of electronic states were obtained using a model based on the diatomics-in-molecule approximation. Special perturbation theory for intermolecular interaction was used to show that the large transition dipole moment between the E0 _g ⁺ and D0 _u ⁺ states caused the appearance of additional long-range corrections, an electrostatic dipole-quadrupole correction to the diabatic coupling matrix elements and induction dipole-dipole correction to the potential energy surface. The influence of these corrections on nonadiabatic dynamics was studied at the level of the semiclassical approximation. The electrostatic correction was found to sharply increase the contribution of resonance (accompanied by minimum kinetic energy changes) vibronic transitions at large distances between the colliding molecules. The induction correction had the opposite effect because of the high transition probability at short distances. The results obtained were in qualitative agreement with experimental data. The conclusion was drawn that obtaining quantitative agreement required a more balanced inclusion of interactions at short and long distances.     

The thermodynamic characteristics of vaporization in the NaI-PrI<Subscript>3</Subscript> system

The vaporization of the NaI-PrI₃ quasi-binary system was studied by high-temperature mass spectrometry over the whole concentration range. At 623–994 K, saturated vapor contained not only (NaI) _n and (PrI₃) _n molecules (n = 1, 2) and Na⁺(NaI) _n (n = 0–4) and I^?(PrI₃) _n (n = 1–2) ions but also mixed molecular and ionic associates recorded for the first time (NaPrI₄, Na₂PrI₅, NaPrI ₃ ⁺ , Na₂PrI ₄ ⁺ , Na₃PrI ₅ ⁺ , Na₄PrI ₆ ⁺ , NaPrI ₅ ^? , and NaPr₂I ₈ ^? ). The partial vapor pressures of molecules were calculated, and the equilibrium constants of the dissociation of neutral and charged associates were measured. The enthalpies of molecular and ion-molecular reactions were determined, and the enthalpies of formation of gaseous molecules and ions were obtained.     

Synthesis,structure, physicochemical properties,and solid-phase thermolysis of Co<Subscript>2</Subscript>Sm(Piv)<Subscript>7</Subscript>(2,4-Lut)<Subscript>2</Subscript>

Heterometallic pivalate Co₂Sm(Piv)₇(2,4-Lut)₂ (1) was prepared for the first time and structurally characterized at 293 and 160 K. Antiferromagnetic exchange interactions are dominant in complex 1. This compound experiences a first-order phase transition within 210–260 K. A set of thermodynamic functions was obtained for this complex (C _p , H _T ⁰ - H ₁₈₀ ⁰ , and S _T ⁰ ), and parameters were determined for solid-phase thermolysis where samarium cobaltate SmCoO₃ is the only product.     

Electrical conductivity and ionic association of lithium and sodium perchlorates in tetrahydrofuran

The total limiting molar electrical conductivities of ions and triads of ions and the association constants of ions with the formation of ion pairs and triads of ions were calculated from the concentration dependences of the electrical conductivity of solutions of lithium and sodium perchlorates in tetrahydrofuran at 278.15–318.15 K with the use of the method specially developed earlier. The experimental total limiting electrical conductivities were used to calculate the limiting molar electrical conductivities and attraction friction factors of separate ions (Li⁺, Na⁺, ClO ₄ ^? , Li₂ClO ₄ ⁺ , Na₂ClO ₄ ⁺ , Li(ClO₄) ₂ ^? , and Na(ClO₄) ₂ ^? ). The constants of ion association into ion pairs were used to calculate the Gibbs energy of non-Coulomb interionic interaction (ΔG*_+?), and the constants of association into triads of ions, to determine the a ₃ distance parameter between the centers of the ion and the dipole of the ion pair. Positive ΔG*_+?), values and deviations of the experimental a ₃ value from the distance parameter calculated theoretically (a ₃ ⁰ ) for the triad of ions (Δa ₃ = a ₃ ? a ₃ ⁰ ) were related to non-Coulomb repulsion in the region of overlap of the solvation shells of ions and the influence of temperature and ion charge density on this repulsion.     

Stability of <Emphasis Type="Italic">s</Emphasis>-, <Emphasis Type="Italic">p</Emphasis>-, and <Emphasis Type="Italic">d</Emphasis>-element diphosphates in water

The mean atomic Gibbs energies of formation of (Δ _f ? _at ⁰ ) of s-, p-, and d-element diphosphates have been calculated using ion increments of the Gibbs energy (Δ _f G ⁰). The diphosphate hydrolysis kinetics is considered, and a correlation between the Δ _f ? _at ⁰ values and the hydrolysis rate constants is presented.     

Theoretical study of stepwise chlorinated aluminide clusters Al<Subscript>13</Subscript>Cl<Stack><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript><Superscript>−</Superscript></Stack> (<Emphasis Type="Italic">n</Emphasis> = 1–9)

The electronic and geometric structures, energy stabilities, normal mode frequencies, and spin density distributions (in radicals) of different stepwise-chlorinated aluminum clusters Al₁₃Cl _n ^? (n = 1–9) are calculated within the B3LYP approximation of the density functional theory using 6-31G* and 6-311+G* basis sets. The results are compared with analogous computation data on hydrides Al₁₃H _n ^? (n = 1–12) obtained at the same level. The general qualitative pattern for related series of hydrides, chlorides, and iodides (as well as fluorides and bromides) turns out to be similar in many respects. For all Al₁₃X _n ^? clusters with different electronegative substituents X, there is a set of a considerable number of low-lying closely spaced inner isomers (with a centered icosahedral cage), marquee isomers, and outer isomers (capped). The effects found by calculations in centered icosahedral isomers—localization of spin density on the trans-Al* atom in radical anions and its associated trans addition rule for an even substituent and the zigzag (odd-even) dependence of the energies D _n (X) of successive addition of substituents X to the metal cage on n described in the framework of the molecular model of the valence states of the Al ₁₃ ^? superatom—should also be shared by many Al₁₃X _n ^? series with different X’s. The differences between hydrides Al₁₃H _n ^? and chlorides Al₁₃Cl _n ^? of the same type are quantitative. For the hydrides, inner isomers are preferable in the first half of the series (n = 1–6); and in the second half (n = 7–12), outer isomers are more favorable. For the chlorides, icosahedral isomers are preferable only at the very beginning of the series. In the other cases, nonicosahedral structures are most favorable, for which the situation becomes very complicated due to the large number of position isomers and the aforementioned simple rules found for centered icosahedral structures are fulfilled to a considerably less extent or not at all.