Effect of interfacial molecular recognition of non-surface-active species on the main characteristics of monolayers

Recent progress in studies of the main characteristics of supramolecular assemblies formed by interfacial molecular recognition between an amphiphilic monolayer and a non-surface-active species, which is dissolved in the aqueous subphase, by complementary hydrogen bonding and/or electrostatic interaction at the air-water interface is reviewed. Systems consisting of an amphiphilic melamine-type monolayer and an pyrimidine derivative dissolved in the aqueous subphase are representative model systems for molecular recognition on the basis of complementary hydrogen bonding. Most of the studies have been performed with 2,4-di(n-undecylamino)-6-amino-1,3,5-triazine (2C11H23-melamine) monolayers as host component and thymine, uracil or barbituric acid as dissolved non-surface-active pyrimidine derivatives. The combination of surface pressure studies with Brewster angle microscopy (BAM) imaging and Grazing incidence X-ray diffraction (GIXD) measurements is optimal for the characterization of the change in structure and phase behavior at the interfacial recognition process. The molecular recognition of all pyrimidine derivatives dissolved in the aqueous subphase changes drastically and in a specific way the characteristic features (pi-A isotherms, morphology of the condensed phase domains) of the 2C11H23-melamine monolayer. The small condensed phase domains of the pure 2C11H23-melamine monolayer are compact without an inner texture. The monolayers of the supramolecular 2C11H23-melamine entities with thymine or uracil form specifically well-shaped condensed phase domains with an inner alkyl chain texture essentially oriented parallel to the periphery. The completely different morphology of the 2C11H23-melamine-barbituric acid monolayers is characterized by the formation of large homogeneous areas of condensed phase that transfer at smaller areas per molecule to a homogeneous condensed monolayer. The striking differences in the main characteristics between the supramolecular entities are related to their different chemical structures: complementary hydrogen bonding of two thymine or uracil molecules by one 2C11H23-melamine molecule and a linearly extended hydrogen bonding network between 2C11H23-melamine and barbituric acid. The high values of hydrogen bonding energy obtained by quantum chemical calculations on the basis of the semi-empirical PM3 method state the high stability of the supramolecular entities. The GIXD results reveal that the formation of hydrogen-bond based superstructures between the polar head groups of the amphiphilic 2C11H23-melamine monolayer and the non-surface-active pyrimidine derivatives gives rise only to quantitative changes in the two-dimensional lattice structure of the alkyl chains. The alternative possibility to construct interfacial molecular recognition systems on the basis of acid-base interaction is demonstrated by the experimental results obtained by molecular recognition of the heptadecyl-benzamidinium chloride monolayers with dissolved non-surface-active phenylacetate ions. The formation of supramolecular assemblies causes also drastical changes of the surface features in these systems. Here, the development of a substructure in the condensed phase domains consisting of long filigree strings and the favoured formation of bilayers overgrowing the strings indicates a linearly extended amidinium-carboxylate interfacial structure of the base and acid component in alternating sequence.     

Kinetics of Complexation in the Monolayers of Amphiphilic Dicetylcyclene on the Surface of Aqueous Copper(II) Chloride Solutions

The kinetics of complexation in monolayers of dicetycyclene at the surface of aqueous copper(II) chloride solutions was studied. It was shown that the changes in the phase state of monolayer related to the conformational transitions of macrocycle are responsible for the differences in the rate and binding mechanism of copper ions. It was concluded that the sterically more advantageous (for the coordination with the metal ion) conformation of macrocyclic polyamine is ensured in a monolayer. In addition, it was established that the rate and mechanism of complexation in such monolayers greatly depend on the degree of protonation of ligands, the latter being dependent on the subphase pH. It was also demonstrated that an increase in subphase pH to 7 and higher results in an almost total suppression of metal ion binding due to strong conformational distortion of dicetylcyclene macrocycles in a monolayer and the hydrogen bonding between macrocycles.     

Mixing behavior of 10-(perfluorohexyl)-decanol and DPPC

Fluorocarbon alcohol such as 10-(perfluorohexyl)-decanol are of interest for novel pulmonary drug delivery approaches. The purpose of this study was to investigate the mixing behavior of 10-(perfluorohexyl)-decanol with dipalmitoylphosphatidylcholine (DPPC), the major component of lung surfactant as an aid in assessing usefulness for this and other biomedical applications. The impact of 10-(perfluorohexyl)-decanol on the phase transitions of DPPC bilayers fully hydrated with a 0.15 M sodium chloride solution were studied using differential scanning calorimetry (DSC). No peak corresponding to excess alcohol was observed. The fluorinated alcohol caused DPPC peak broadening, especially below X(DPPC) < 0.95, and elimination of the pretransition of DPPC at X(DPPC) approximately 0.91. The onset of the main phase transition remains constant down to X(DPPC) approximately 0.91, suggesting limited miscibility in the gel phase. Hydration of the 10-(perfluorohexyl)-decanol-DPPC mixtures with calcium chloride (2 mM) in place of sodium chloride did not alter the macroscopic phase behavior. In addition to the thermal properties, the miscibility of 10-(perfluorohexyl)-decanol in DPPC in monolayers at the air water interface was investigated on water, sodium chloride (0.15 M), calcium chloride (2 mM) or hydrochloric acid (pH 1.9) subphases. The concentration dependence of the onset pressure of the liquid-expanded to liquid condensed phase transition of DPPC showed a slight change with increasing mole fraction on all four subphases. The surface area-mole fraction diagrams of 10-(perfluorohexyl)-decanol and DPPC on water, sodium chloride and calcium chloride showed near ideal behavior with slight negative deviations at higher surface pressure. A more significant negative deviation was observed for the hydrochloric acid subphase. Overall, both the DSC and the monolayer studies suggest that 10-(perfluorohexyl)-decanol and DPPC are partially miscible in biological mono- and bilayers. The macroscopic phase behavior 10-(perfluorohexyl)-decanol-DPPC system is significantly different from the analogous hydrocarbon system, which is attributed to a less favorable packing of the partially fluorinated hydrophobic tails in the mono- and bilayer.     

Bilayer and trilayer crystalline formation by collapsing behenic acid monolayers at gas/aqueous interfaces

X-ray reflectivities and grazing incidence X-ray diffractions of behenic acid (BA) monolayers compressed to the collapse region reveal that the resulting structures are reproducible and exhibit a high degree of order. The structures of the collapsed monolayers depend on the subphase solution. On pure water, the collapsed monolayer forms a stable crystalline trilayer structure. For monolayers spread on Ca2+ solutions, we find that an inverted bilayer structure is formed; that is, stretched BA-Ca-BA (calcium dibehenate, with calcium ions bridging the polar headgroups) forms a monolayer with the hydrophobic tails in contact with the water surface.     

A study of the interaction between polyelectrolyte-coated nanostructured CaCO<Subscript>3</Subscript> particles and a stearic acid monolayer spread at the water/air interface

The influence of nanostructured CaCO₃ particles, both uncoated and coated with a polyelectrolyte (poly(diallyldimethylammonium chloride), polyethyleneimine, fluorescein-5-isothiocyanate-labeled poly(allylamine hydrochloride), or sodium polystyrene sulfonate), on a stearic acid monolayer spread on the surface of an aqueous subphase has been studied. The interaction of the particles present in the subphase with the monolayer as depending on the presence and composition of a polymer coating has been estimated with the help of compression isotherms and the Brewster angle microscopy. The monolayers were transferred from the aqueous subphase onto a solid substrate and studied by scanning electron microscopy. Strong interaction has been revealed between the calcium carbonate particles and the stearic acid monolayer. It has been shown that the transfer of the monolayer from the aqueous suspension surface onto the solid substrate may be accompanied by the detachment of the polymer coating from the surface of CaCO₃ particles or their transfer together with the monolayer.     

Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media

The miscibility, mechanical and morphological properties of mixed Langmuir and Langmuir-Blodgett monolayers prepared from the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and the perfluorinated fatty acid perfluorooctadecanoic acid have been studied as a function of film composition and subphase salinity. It was demonstrated here, for the first time, that the extent of surfactant miscibility in mixed phospholipid-perfluoroacid monolayers, and hence the resulting mechanical properties of the monolayer film, can be controlled by altering the concentration of sodium ions in the underlying subphase. Elevated Na(+) concentrations resulted in lower net attractive interactions between film components, likely through specific ion adsorption to the negatively-charged perfluoroacid, along with decreased film elasticities. These results differ significantly from conventional fatty-acid-carboxylate monolayer systems in which film cohesion is typically enhanced through adsorption of cations to surfactant headgroups. Atomic force microscope images of films deposited onto solid mica substrates revealed that the films deposited from pure water formed multimolecular aggregates of surfactant, which could be attributed to the highly cohesive nature of the films, but the use of salt in the subphase diminished aggregate formation and resulted in the production of homogeneous monolayer films.     

A quasi-time-resolved CryoTEM study of the nucleation of CaCO3 under langmuir monolayers

Calcium carbonate biomineralization uses complex assemblies of macromolecules that control the nucleation, growth, and positioning of the mineral with great detail. To investigate the mechanisms involved in these processes, for many years Langmuir monolayers have been used as model systems. Here, we descibe the use of cryogenic transmission electron microscopy in combination with selected area electron diffraction as a quasi-time-resolved technique to study the very early stages of this process. In this way, we assess the evolution of morphology, polymorphic type, and crystallographic orientation of the calcium carbonate formed. For this, we used a self-assembled Langmuir monolayer of a valine-based bisureido surfactant (1) spread on a CaCl2-containing subphase and deposited on a holey carbon TEM grid. In a controlled environment, the grid is exposed to an atmosphere containing NH3 and CO2 (the (NH4)2CO3 diffusion method) for precisely determined periods of time (reaction times 30-1800 s) before it was plunged into melting ethane. This procedure allows us to observe amorphous calcium carbonate (ACC) particles growing from a few tens of nanometers to hundreds of nanometers and then crystallizing to form [00.1] oriented vaterite. The vaterite in turn transforms to yield [10.0] oriented calcite. We also performed the reaction in the absence of monolayer or in the presence of a nondirective monolayer of surfactant containing an oligo(ethylene oxide) 2 head group. Both experiments also showed the formation of a transient amorphous phase followed by a direct conversion into randomly oriented calcite crystals. These results imply the specific though temporary stabilization of the (00.1) vaterite by the monolayer. However, experiments performed at higher CaCl2 concentrations show the direct conversion of ACC into [10.0] oriented calcite. Moreover, prolonged exposure to the electron beam shows that this transformation can take place as a topotactic process. The formation of the (100) calcite as final product under different conditions shows that the surfactant is very effective in directing the formation of this crystal plane. In addition, we present evidence that more than one type of ACC is involved in the processes described.     

Characterization limits of a polymer adsorbed under a monolayer by GIXD measurements

The study of interactions between a polyelectrolyte (sodium polystyrene sulfonate, PSSt) or its water-soluble monomer (SSt) at different concentrations and a monolayer of dioctadecyldimethylammonium bromide (DODA) has been investigated. The monolayer phase behavior and structure at the air-water interface were studied by surface pressure-area isotherms and grazing incidence X-ray diffraction measurements. DODA molecules organize following a rectangular unit cell in all three subphases (pure water, water containing SSt or PSSt). The presence of polyelectrolytes in the subphase decreases, on one hand, the tilt angle and the mean area per molecule in the condensed phase, revealing a higher 2D density in this state, and, on the other hand, the amount of organized matter.     

Incorporation of blood clotting factor X into phospholipid model membranes: fluorescence microscopy imaging and subphase effects surrounding the lipid phase transition region

Factor X is a blood clotting protein that associates at membrane surfaces to become activated during the coagulation cascade. A molecular level understanding of the protein-membrane phospholipid interactions has not been reached, although it is thought that the protein binds to phospholipids in the presence of calcium through a bridge with the Gla (gamma-carboxyglutamic acid) domain on the protein. In this work, phospholipid Langmuir monolayers have been utilized as model membranes to study factor X association with phospholipid membrane components. Surface pressure measurements indicate that subphase addition of sodium, magnesium, and calcium ions enhances protein penetration of the lipid monolayer, with the largest association found with calcium ions in the subphase. Fluorescence microscopy images collected after protein penetration of lipid monolayers indicate monolayer condensation in the presence of sodium and magnesium ions. Aggregation of lipid domains is induced when calcium is in the subphase, indicating binding-induced flocculation of surface lipid aggregates. Calcium binding to factor X likely causes a conformational change which allows protein-membrane interaction via hydrophobic association with lipid molecules.     

Monolayer studies of single-chain polyprenyl phosphates

The monolayer properties of some single-chain polyprenyl phosphates (phytanyl, phytyl, and geranylgeranyl phosphates), which we regard as hypothetical primitive membrane lipids, were investigated at the air-water interface by surface pressure-area (pi-A) isotherm measurements. The molecular area/ pressure at various pH conditions dependence revealed the acid dissociation constants (pKa values) of the phosphate. The pKa values thus obtained at the air-water interface (pKa1 = 7.1 and pKa2 = 9.4 for phytanyl phosphate) were significantly shifted to higher pH than those observed in the bilayer state in water (pKa1 = 2.9 and pKa2 = 7.8). The difference in pKa values leads to a stability of the phosphate as both monolayer and bilayer states in a pH range of 2-6. In addition, the presence of ions such as sodium, magnesium, calcium, and lanthanum in the subphase significantly altered the stability of the polyprenyl phosphate monolayers, as shown by the determination of monolayer collapse and compression/expansion hysteresis. Although sodium ions in the subphase showed only a weak effect on the stabilization of the monolayer, addition of magnesium ions or of a small amount of calcium ions significantly suppressed the dissolution of the monolayer into the subphase and increased its mechanical stability against collapse. In contrast, the presence of larger amounts of calcium or of lanthanum ions induced collapse of the monolayers. Based on these experimental facts, a plausible scenario for the formation of primitive cell membrane by transformation of a monolayer to vesicle structures is proposed.     

Formation of langmuir-blodgett films containing two-dimensional monoatomic arrays of rare-earth cations

The work is focused on the preparation and characterisation of rare-earth containing stearic acid Langmuir-Blodgett (LB) films. Stearic acid monolayer behavior on the rare-earth containing aqueous subphase have been analyzed by thermodynamic measurements. The compression isotherm shape changed substantially under varying the anion type at the constant rare-earth cation content in aqueous subphase. The structure of formed multilayer rare-earth containing LB films was studied using small angle X-rays diffraction. The considerable structural defects in multilayer films were found when rare-earth chloride solution was exploited as aqueous subphase, caused presumably by electrostatic interactions at the monolayer surface under high binding of rare-earth cations. The use of monodentate complexones like acetic acid was proposed to form bulk phase quasi-neutral rare-earth complexes. The electroneutral ligand exchange reactions of such complexes with stearic acid monolayer allowed to neutralise monolayer surface under rare-earth cations binding and to form condenced monolayer below the triple-point temperature. The compression of such monolayer to the state of minimal compressibility and subsequent monolayer deposition resulted in the formation of high ordered LB films with high content of adsorbed multivalent rare-earth cations arranged in two-dimensional monoatomic arrays.     

Electrodialytic transport properties of cation exchange membranes in the presence of cyclodextrins

After commercial cation exchange membranes (NEOSEPTA) had been immersed in an aqueous cyclodextrin solutions, electrodialysis of a 1:1 mixed solutions of alkaline earth metal ions and sodium chloride was carried out in the presence of cyclodextrins in the desalting side solution. Adsorption of the cyclodextrins in the membrane matrix was confirmed by IR spectrum, X-ray photoelectron spectroscopy (XPS) and the weight increase of each corresponding component of the membranes. As a result of adsorption of the cyclodextrins in the membranes, transport numbers of alkaline earth metal ions relative to sodium ions decreased compared with those of the membranes without cyclodextrins. Water content in the membrane increased and a ratio of calcium ions (alkaline earth metal ions) to sodium ions in the membrane phase decreased after adsorption of the cyclodextrins. This is due to existence of the compounds having hydrophilic outer surface, cyclodextrins, in the membrane matrix. The decrease in the transport number of calcium ions relative to sodium ions was due to both decrease in a ratio of mobility of calcium ions to that of sodium ions and decrease in an ionic ratio of calcium ions to sodium ions in the membrane phase.     

Monolayers of mono- and bipolar palmitic acid derivatives

Monopolar and bipolar derivatives of hexadecanoic acid (HA), 16-hydroxyhexadecanoic acid (HHA), methyl hexadecanoate (MH) and methyl 16-hydroxyhexadecanoate (MHH) have been investigated on pure water and NaCl solutions with different ion concentrations (1, 2 and 3 mol l⁻¹). Surface pressure area isotherms show that HA forms a fully condensed monolayer on pure water at 20 °C [E. Teer, C.M. Knobler, S. Siegel, D. Vollhardt, G. Brezesinski, J. Phys. Chem., B104, 43, 2000, pp. 10053–10058] whereas in the case of the corresponding bipolar HHA the hydroxy group as a second polar moiety leads to a destabilization of the monolayer. The presence of two relatively strong hydrophilic polar groups at opposite ends of the chain prevents the formation of condensed films. The esterification of the carboxyl group (MH) changes the phase sequence from L₂–Ov–LS for HA to L₂–LS. Inserting a hydroxy group at the end of the chain (MHH) shifts the liquid expanded/liquid condensed (LE/LC) phase transition to higher surface pressures but does not change the phase sequence, however it increases the chain tilt. The pressure of the first-order phase transition LE/LC is strongly temperature dependent for MH, while the transition pressure of MHH is almost temperature independent. The phase behavior of MHH and MH on pure water was further studied by surface potential, Brewster angle microscopy (BAM), fluorescence microscopy and grazing incidence X-ray diffraction (GIXD) measurements. The LC domains of MHH on pure water are so small that no inner texture can be observed by BAM in contrast to the LC domains of MH. 3M NaCl in the subphase does not change the MH textures, while it increases the size of the LC domains of MHH. The influence of the hydroxy group on the monolayer behavior is discussed in terms of the formation of hydrogen bonds. The presence of NaCl in the subphase expands the monolayers. The results obtained are explained by changes in monolayer–monolayer and monolayer–subphase interactions.     

铁饼状碳酸钙的制备及性能研究

本文以氯化钙和氨水的混合溶液为水相,聚氧乙烯辛基苯酚醚-10(OP-10)为表面活性剂,正辛醇为助表面活性剂,环己烷为油相配制了反相微乳液。并通过向其中通入CO 2气体制备微/纳米碳酸钙,得到了铁饼状的微米碳酸钙。采用扫描电子显微镜(SEM),X射线粉末衍射(XRD)和傅里叶变换红外光谱(FTIR)表征了微米碳酸钙的形貌和晶型结构。初步探讨了铁饼状微米碳酸钙的形成机理。     

Effects of Calcium Ions on Thermodynamic Properties of Mixed Bilirubin/Cholesterol Monolayers

The mixed monolayer behavior of bilirubin/cholesterol was studied through surface pressure-area (?-A) isotherms on aqueous solutions containing various concentrations of calcium ions. Based on the data of ?-A isotherms, the mean area per molecule, collapse pressure, surface compressibility modulus, excess molecular areas, free energy of mixing, and excess free energy of mixing of the monolayers on different subphases were calculated. The results show an expansion in the structure of the mixed monolayer with Ca2+ in subphase, and non-ideal mixing of the components at the air/water interface is observed with positive deviation from the additivity rule in the excess molecular areas. The miscibility between the components is weakened with the increase of concentration of Ca2+ in subphase. The facts indicate the presence of coordination between Ca2+ and the two components. The mixed monolayer, in which the molar ratio of bilirubin to cholesterol is 3:2, is more stable from a thermodynamic point of view on pure water. But the stable 3:2 stoichiometry complex is destroyed with the increase of the concentration of Ca2+ in subphase. Otherwise, the mixed monolayers have more thermodynamic stability at lower surface pressure on Ca2+ subphase.     

Effect of Metal Ions on the Formation and Properties of Monolayers and Nanosized Langmuir-Blodgett Films Based on Diphilic Aminomethylated Calix[4]resorcinarenes

The behavior of the monolayers of three diphilic aminomethylated calix[4]resorcinarene (CRA) derivatives on the surface of a pure aqueous subphase and subphase containing copper(II), nickel(II), europium(III), terbium(III), and lanthanum(III) ions was investigated. The monolayer transfer to the quartz and single-crystal silicon substrates was accomplished by the Langmuir-Blodgett (LB) technique. The films were studied by ellipsometry and mass-spectrometry. Metal ions were found to exert effect on the limit area per one CRA molecule in the monolayer, on the surface collapse pressure and transfer coefficient of monolayer, and on the thickness and refractive index of the CRA-based LB films.     

由组分可控的LB膜前驱物法制备Y2O3稳定立方相ZrO2的超薄陶瓷膜

由有机LB膜技术发展了一种制备组分、厚度可控的无机超薄陶瓷膜的方法.以Zr、 Y的β-二酮络合物的作为"表面离子"代替传统的亚相离子,沉积它们与花生酸的混合LB膜.并将它作为前驱物,经臭氧处理和热处理,成功制得了Y2O3稳定的立方相ZrO2超薄膜(YSZ).用X射线衍射(XRD)、 X射线光电子能谱(XPS)等手段研究了YSZ薄膜的相结构和其组成.结果表明,超薄陶瓷膜中Zr与Y的含量比率控制得很好,且形成Y2O3稳定的立方相ZrO2.说明这种方法可以成功地用来制备组分和膜厚均可控的纳米陶瓷膜.     

The Monolayer Behavior of Amphiphilic Polymer and Heterostructure of Polymer LB Film/CdS Clusters

In this paper we report the behavior of an amphiphilic polymer monolayer on pure water and Cd2+ subphase. This polymer was composed of hydrophilic ethylene diamine epichlorohydrin slightly crosslinked microgel and hydrophobic stearic chains, noted as ES-1. The introduction of Cd2+ ions in subphase had a marked effect on the process of the organization of the amphiphilic polymer at the air/water interface due to the association of Cd2+ ions with the hydrophilic network, which could be indicated by the pressure-area isotherms and Brewster Angle Microscopy. Ordered ES-1/Cd2+ LB multilayers were fabricated. After the multilayers reacted with H2S gas, CdS clusters were synthesized within the film, which was characterized by X-ray diffraction and UV-visible spectroscopy. Copyright 1999 Academic Press.     

Configuration and photochemical reaction of a bolaamphiphilic diacid with a diazo resin in monolayers and Langmuir-Blodgett films

The monolayer formation of a bolaamphiphile, 1,18-octadecanedicarboxylic acid (ODA), on pure water and the subphase containing a positively charged photoactive 2-nitro-N-methyldiphenylamine-4-diazoniumformaldehyde resin (NDR) have been investigated by pi-A isotherms, pi-t curves, and Brewster angle microscopy (BAM) measurements. It has been revealed that although an unstable monolayer was formed by ODA alone, a stable complex monolayer between ODA and NDR could be formed at the interface through electrostatic adsorption and hydrogen bonding. It has been shown that the ODA formed a U-shaped monolayer at a lower pressure and was converted to a stretched configuration upon compression to a higher surface pressure on the subphase containing NDR. Under UV irradiation at the interface photoreaction can occur in the complex monolayer, which causes shrinkage of the monolayer. Photochemical reactions can also occur in deposited Langmuir-Blodgett films. In reactions occurring at the air/water interface, the two ends of ODA can react with NDR to form an ester containing aromatic rings. This makes the compound more hydrophobic and can easily be stretched without any phase transition upon compression. When the film with U-shaped configuration was deposited onto solid substrates, the configuration could be kept even upon photoirradiation.     

Molecular organization in protein-lipid film on the water surface studied by x-ray standing wave measurements under total external reflection

The x-ray standing wave method has been applied to study self-assembling processes in a protein-lipid film formed by injecting the protein-lipid mixture of alkaline phosphatase and phosphatidylinositol under the phospholipid monolayer preliminarily deposited on the water subphase by Langmuir method. X-ray standing wave measurements allowed to determine the composition of the protein-lipid film and to locate ions position in the direction normal to the film surface. The presence of trace Ni contamination incorporated in the protein-lipid film from the water subphase has been established. Numerical analysis of the X-ray standing wave fluorescence data revealed that after injection under the phospholipid monolayer, the protein-lipid mixture separated in a self-assembled manner to layered structure, molecules of alkaline phosphatase arranged themselves into a pure protein layer containing no phospholipid molecules.