窄带隙IV-VI族半导体PbTe(111)的表面氧化及氧的热脱附机理

利用X射线光电子能谱(XPS)、扫描隧道显微镜(STM)以及低能电子衍射(LEED),对PbTe(111)薄膜的表面氧化及氧的热脱附机理进行了研究.结果表明:PbTe(111)薄膜经500VAr+轰击加上250℃高温退火循环处理,可得到呈(1×1)周期性排列的清洁表面.将此清洁表面暴露于大气两天后,表面被氧化形成了PbO2、PbO和TeO2,氧化层的厚度大于2个单原子层(ML),与清洁PbTe(111)表面相比,被氧化的PbTe(111)表面的Te3d5/2与Pb4f7/2芯态谱峰的面积比明显减小,表明被氧化的PbTe(111)表面是富Pb的.在热脱附处理过程中,PbO2和TeO2的芯态峰消失,且O1s芯态峰的强度迅速减弱,表明加热处理不仅使PbO2和TeO2发生了分解,同时也使氧发生了脱附,但PbO即使在350℃退火仍吸附于PbTe(111)表面.     

Selective formation of cumulative double bonds (C[double bond]C[double bond]N) in the attachment of multifunctional molecules on Si(111)-7 x 7

The cumulative double bond (C[double bond]C[double bond]N), an important intermediate in synthetic organic chemistry, was successfully prepared via the selective attachment of acrylonitrile to Si(111)-7 x 7. The covalent binding of acrylonitrile on Si(111)-7 x 7 was studied using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), scanning tunneling microscopy (STM) and DFT calculations. The observation of the characteristic vibrational modes and electronic structures of the C[double bond]C[double bond]N group in the surface species demonstrates the [4 + 2]-like cycloaddition occurring between the terminal C and N atoms of acrylonitrile and the neighboring adatom-rest atom pair, consistent with the prediction of DFT calculations. STM studies further show the preferential binding of acrylonitrile on the center adatom sites of faulted halves of Si(111)-7 x 7 unit cells.     

Epitaxial BaTiO3(100) films on Pt(100): a low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO(3) films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O(2). By adjusting the Ar and O(2) partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO(3)(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO(3) films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO(3)(100)-(1 × 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 × 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO(3) thin film starts to decay by formation of vacancy islands. In addition (4 × 4) and (3 × 3) surface reconstructions develop upon prolonged heating.     

Surface chirality of CuO thin films

We present X-ray photoelectron spectroscopy (XPS) and X-ray photoelectron diffraction (XPD) investigations of CuO thin films electrochemically deposited on an Au(001) single-crystal surface from a solution containing chiral tartaric acid (TA). The presence of enantiopure TA in the deposition process results in a homochiral CuO surface, as revealed by XPD. On the other hand, XPD patterns of films deposited with racemic tartaric acid or the "achiral" meso-tartaric acid are completely symmetric. A detailed analysis of the experimental data using single scattering cluster calculations reveals that the films grown with l(+)-TA exhibit a CuO(1) orientation, whereas growth in the presence of d(-)-TA results in a CuO(11) surface orientation. A simple bulk-truncated model structure with two terminating oxygen layers reproduces the experimental XPD data. Deposition with alternating enantiomers of tartaric acid leads to CuO films of alternating chirality. Enantiospecifity of the chiral CuO surfaces is demonstrated by further deposition of CuO from a solution containing racemic tartaric acid. The pre-deposited homochiral films exhibit selectivity toward the same enantiomeric deposition pathway.     

Interaction of carbon monoxide with Au(111) modified by ion bombardment: a surface spectroscopy study under elevated pressure

Gold based model systems exhibiting the structural versatility of nanoparticle ensembles and being accessible for surface spectroscopic investigations are expected to provide new information about the adsorption of carbon monoxide, a key process influencing the CO oxidation activity of this noble metal in nanoparticulate form. Accordingly, in the present work the interaction of CO is studied with an ion bombardment modified Au(111) surface by means of a combination of photoelectron spectroscopy (XPS and UPS), sum frequency generation vibrational spectroscopy (SFG), and scanning tunneling microscopy (STM). While no adsorption was found on intact Au(111), data collected on the ion bombarded surface at cryogenic temperatures indicated the presence of stable CO adsorbates below 190 K. A quantitative evaluation of the C 1s XPS spectra and the surface morphology explored by STM revealed that the step edge sites created by ion bombardment are responsible for CO adsorption. The identification of the CO binding sites was confirmed by density functional theory (DFT) calculations. Annealing experiments up to room temperature showed that at temperatures above 190 K unstable adsorbates are formed on the surface under dynamic exposure conditions that disappeared immediately when gaseous CO was removed from the system. Spectroscopic data as well as STM records revealed that prolonged CO exposure at higher pressures of up to 1 mbar around room temperature facilitates massive atomic movements on the roughened surface, leading to its strong reordering toward the structure of the intact Au(111) surface, accompanied by the loss of the CO binding capacity.     

Surface cosegregationp phenomena on alloys and steels: Structural features and phase transitions

In recent years surface cosegregation phenomena have been studied on various alloy and steel surfaces using surface sensitive techniques such as Auger electron spectroscopy (AES), x-ray photoelectron spectroscopy (XPS), x-ray photoelectron diffraction (XPD) and low energy electron diffraction (LEED). Surface cosegregation causes the formation of two-dimensional surface compounds which may be stabilized by epitaxy on substrate surfaces of suitable structure and orientation. It has been found that in many cases surface compounds undergo phase transitions which are reviewed in this short report.     

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.     

Temporal evolution of benzenethiolate SAMs on Cu(100)

The structure and thermal stability of self-assembled monolayers (SAMs) of benzenethiolate (BT) on Cu(100) have been studied by means of thermal desorption spectroscopy (TDS), scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), UV photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS), and near-edge X-ray adsorption fine structure spectroscopy (NEXAFS). Vapor deposition at room temperature yields a well-ordered, densely packed c(6 × 2) saturation structure. At room temperature, this film is, however, metastable and transforms via partial decomposition by cleavage of the S-C bond into a less densely packed layer that reveals a coexisting p(2 × 2) phase. Such a transition occurs on a time scale of several days and is accompanied by a reduction of the work function change with respect to the bare Cu(100) surface from Δ? = -0.9 eV for a freshly prepared saturated layer to -0.5 eV for an aged film. TDS experiments exhibit the presence of two distinct desorption channels (dissociative and intact desorption) occurring at different temperatures that reflects a variation of the local Cu-S interaction strength of BT at differently coordinated adsorption sites. Heating to above room temperature causes a rapid degradation and continuous thinning of BT films whereas above 500 K all thiolate species have desorbed or dissociated, leaving a sulfide overlayer behind that is accompanied by a substrate reconstruction. Interestingly, the upright orientation of BT adopted in the saturated monolayer remains almost identical upon heating and demonstrates the absence of downward tilting upon thermally induced thinning of the film.     

Ultrathin TiO(x) films on Pt(111): a LEED, XPS, and STM investigation

Ultrathin ordered titanium oxide films on Pt(111) surface are prepared by reactive evaporation of Ti in oxygen. By varying the Ti dose and the annealing conditions (i.e., temperature and oxygen pressure), six different long-range ordered phases are obtained. They are characterized by means of low-energy electron diffraction (LEED), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). By careful optimization of the preparative parameters, we find conditions where predominantly single phases of TiO(x), revealing distinct LEED pattern and STM images, are produced. XPS binding energy and photoelectron diffraction (XPD) data indicate that all the phases, except one (the stoichiometric rect-TiO2), are one monolayer thick and composed of a Ti-O bilayer with interfacial Ti. Atomically resolved STM images confirm that these TiO(x) phases wet the Pt surface, in contrast to rect-TiO2. This indicates their interface stabilization. At a low Ti dose (0.4 monolayer equivalents, MLE), an incommensurate kagomé-like low-density phase (k-TiO(x) phase) is observed where hexagons are sharing their vertexes. At a higher Ti dose (0.8 MLE), two denser phases are found, both characterized by a zigzag motif (z- and z'-TiO(x) phases), but with distinct rectangular unit cells. Among them, z'-TiO(x), which is obtained by annealing in ultrahigh vacuum (UHV), shows a larger unit cell. When the postannealing of the 0.8 MLE deposit is carried out at high temperatures and high oxygen partial pressures, the incommensurate nonwetting, fully oxidized rect-TiO2 is found The symmetry and lattice dimensions are almost identical with rect-VO2, observed in the system VO(x)/Pd(111). At a higher coverage (1.2 MLE), two commensurate hexagonal phases are formed, namely the w- [(square root(43) x square root(43)) R 7.6 degrees] and w'-TiO(x) phase [(7 x 7) R 21.8 degrees]. They show wagon-wheel-like structures and have slightly different lattice dimensions. Larger Ti deposits produce TiO2 nanoclusters on top of the different monolayer films, as supported both by XPS and STM data. Besides the formation of TiO(x) surfaces phases, wormlike features are found on the bare parts of the substrate by STM. We suggest that these structures, probably multilayer disordered TiO2, represent growth precursors of the ordered phases. Our results on the different nanostructures are compared with literature data on similar systems, e.g., VO(x)/Pd(111), VO(x)/Rh(111), TiO(x)/Pd(111), TiO(x)/Pt(111), and TiO(x)/Ru(0001). Similar and distinct features are observed in the TiO(x)/Pt(111) case, which may be related to the different chemical natures of the overlayer and of the substrate.     

Hydrogen and deuterium exchange on Pt(111) and its poisoning by carbon monoxide studied by surface sensitive high-pressure techniques

Catalytic hydrogen/deuterium exchange on a platinum (111) single crystal and its poisoning with carbon monoxide was studied using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), sum frequency generation vibrational spectroscopy (SFG), and mass spectrometry under reaction conditions at pressures in the mTorr to atmospheric range. At 298 K and in the presence of 200 mTorr of hydrogen and 20 mTorr of deuterium the surface is catalytically active, producing HD with activation energy of approximately 5.3 kcal/mol. Addition of 5 mTorr of CO stops the reaction completely. In situ STM images reveal an ordered surface structure of chemisorbed CO. At 353 K the addition of 5 mTorr of CO slows the reaction by 3 orders of magnitude, but HD production continues with an activation energy of 17.4 kcal/mol. Changes in coverage and adsorption site of CO were followed by XPS and SFG up to a temperature of 480 K. From these data, a CO dominated, mobile and catalytically active surface model is proposed.     

Structural evolution of perfluoro-pentacene films on Ag(111): transition from 2D to 3D growth

The structural evolution and thermal stability of perfluoro-pentacene (PF-PEN) thin films on Ag(111) have been studied by means of low-temperature scanning tunnelling microscopy (STM), low-energy electron diffraction (LEED), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). Well-defined monolayer films can be prepared by utilizing the different adsorption energy of mono- and multilayer films and selectively desorbing multilayers upon careful heating at 380 K, whereas at temperatures above 400 K, a dissociation occurs. In the first monolayer, the molecules adopt a planar adsorption geometry and form a well-ordered commensurate (6 × 3) superstructure where molecules are uniformly oriented with their long axis along the <110> azimuth. This molecular orientation is also maintained in the second layer, where molecules exhibit a staggered packing motif, whereas further deposition leads to the formation of isolated, tall islands. Moreover, on smooth silver surfaces with extended terraces, growth of PF-PEN onto beforehand prepared long-range ordered monolayer films at elevated temperature leads to needle-like islands that are uniformly aligned at substrate steps along <110> azimuth directions.     

Structural study of NO adsorbed on the reconstructed Pt(110)-(1 x 2) surface with X-ray photoelectron diffraction and near-edge X-ray absorption fine structure spectroscopy

The adsorption structure of NO on the reconstructed Pt(110)-(1 x 2) surface was studied with X-ray photoelectron spectroscopy (XPS), X-ray photoelectron diffraction (XPD), low-energy scanned-angle photoelectron diffraction (LESA-PD), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The experiments were performed at 180 K, where no surface lifting from (1 x 2) to (1 x 1) takes place after NO adsorption. XPS indicates that the (1 x 2) unit cell of the Pt(110) surface contains 1.5 NO molecules at the saturated coverage. XPD and LESA-PD analyses allow us to propose a structural model for the NO adlayer, where two-thirds of the NO molecules in the (1 x 2) unit cell are adsorbed on the atop site of the close-packed Pt rows (ridges) along the [10] direction with an inclined geometry and one-third of the NO molecules adsorb on the bridge site between the Pt ridges with an upright configuration. This model is supported by the N K-edge NEXAFS experiments and is consistent with the recently reported model based on the density functional theory (Orita, H.; Nakamura, I.; Fujitani, T. J. Phys. Chem. B 2005, 109, 10312).     

Deposition of tetracene on GaSe passivated Si(111)

The growth of tetracene on GaSe half-sheet passivated Si(111) is investigated under ultrahigh vacuum (UHV) using low-energy electron diffraction (LEED) and photoelectron spectroscopy (PS). A highly ordered thin-film growth was observed in the initial stages of the deposition process. All proposed structures form a coincidence lattice with the underlying substrate, due to the influence of the molecule-substrate interactions and are built up by either flat lying tetracene molecules at low coverage or tilted molecules at higher coverages. Photoelectron spectroscopy (XPS/UPS) shows that the deposited tetracene molecules induce band bending in the silicon substrate. No band bending was observed in the tetracene film, and an interface dipole potential of 0.45 eV was measured between the GaSe passivated Si(111) surface and the tetracene film.     

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS,LEED and DFT Study

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33–0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.     

Gold catalyzed reduction of a hexavalent aromatic sulfonyl phthalimide to sulfur

The reduction of N-(p-fluorobenzenesulfonyl)phthalimide on polycrystalline gold and Au(111) was studied. Our key finding is the decomposition of the compound on the surface, leaving only sulfur behind. This was supported by X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and scanning tunneling microscopy (STM). The modification leads to observation by STM of well-known as well as new phases for the S modified Au(111) surface.     

Pt(111) 表面上表层 Fe (FeO) 结构和次表层 Fe 结构的可控转变

 利用扫描隧道显微镜 (STM) 和 X 射线光电子能谱 (XPS) 对 Pt(111) 表面制备的 Fe 单层薄膜及其在不同环境气氛条件下的多种结构进行了研究. 在温度为 487 K 的 Pt(111) 表面制备出了完整的 Fe 单层薄膜Fe/Pt(111). 对 Fe/Pt(111) 依次升高温度进行超高真空退火, STM 和 XPS 结果表明退火温度高于 800 K 时, 表面 Fe 原子扩散到次表层区域, 形成次表层 Fe 结构Pt/Fe/Pt(111). Pt/Fe/Pt(111) 在 O2 氧化气氛中经 850 K 退火可转变成表面 FeO 薄膜FeO/Pt(111). FeO/Pt(111) 结构在温和的 H2 还原气氛中 (600 K) 转变成表面 Fe 结构, 进一步的还原处理 (800 K) 则可以重新生成 Pt/Fe/Pt(111). 控制样品的环境气氛在 O2 和 H2 之间切换, 使得表面 Fe (FeO) 和次表面 Fe 可以重复地转变. 本研究实现了多种 Fe-Pt 表面结构的可控制备, 可为合理地设计高效、价廉的催化剂提供借鉴.     

Characterization of molybdenum carbide nanoparticles formed on Au(111) using reactive-layer assisted deposition

Temperature programmed desorption (TPD), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM) have been used to characterize molybdenum carbide nanoparticles prepared on a Au(111) substrate. The MoC(x) nanoparticles were formed by Mo metal deposition onto a reactive multilayer of ethylene, which was physisorbed on a Au(111) substrate at low temperatures (<100 K). The resulting clusters have an average diameter of approximately 1.5 nm and aggregate in the fcc troughs located on either side of the elbows of the reconstructed Au(111) surface. Core level XPS shows that the electronic environment of the Mo and C atoms in the nanoparticles is similar to that found in Mo(2)C(0001) single crystals and carburized Mo metal surfaces. Peak intensities in XPS and AES spectra were used to estimate an average Mo/C atomic ratio of 1.2 +/- 0.3 for nanoparticles annealed above 600 K.     

Mono- and multi-layer adsorption of an ionic liquid on Au(110)

Ultraviolet photoelectron spectroscopy (UPS), work function measurements, low energy electron diffraction (LEED) and scanning tunnelling microscopy (STM) have been used to study the adsorption and desorption of 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [C(2)C(1)Im][Tf(2)N], on the (1×2) clean surface reconstruction of Au(110) in the temperature range 100-674 K. The ionic liquid adsorbed without decomposition, and desorbed without leaving any residue on the surface. For adsorption at room temperature a monolayer of strongly bound ionic liquid was formed with four interface states visible in UP spectra. STM at 100 K showed that the monolayer consisted of well-ordered rows of adsorbed ionic liquid aligned parallel to the close packed rows of surface gold atoms (the [110] direction) with a separation of ×2 (the same as the clean surface reconstruction) between the rows in the orthogonal [001] direction. Multilayer adsorption at room temperature occurred by droplet formation followed by smoothing of the droplets to a layered morphology with time. Heating caused multilayer desorption at temperatures in the 363-383 K range, followed by partial monolayer desorption at 548 K to produce a Au(110)-(1×3) reconstructed surface with sub-monolayer domains of ionic liquid. Desorption of the remaining ionic liquid at 600 K caused the gold surface to reconstruct back to the clean (1×2) reconstruction.     

Bonding structure of phenylacetylene on hydrogen-terminated Si(111) and Si(100): surface photoelectron spectroscopy analysis and ab initio calculations

Interfaces between phenylacetylene (PA) monolayers and two silicon surfaces, Si(111) and Si(100), are probed by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and the results are analyzed using ab initio molecular orbital calculations. The monolayer systems are prepared via the surface hydrosilylation reaction between PA and hydrogen-terminated silicon surfaces. The following spectral features are obtained for both of the PA-Si(111) and PA-Si(100) systems: a broad π-π* shakeup peak at 292 eV (XPS), a broad first ionization peak at 3.8 eV (UPS), and a low-energy C 1s → π* resonance peak at 284.3 eV (NEXAFS). These findings are ascribed to a styrene-like π-conjugated molecular structure at the PA-Si interface by comparing the experimental data with theoretical analysis results. A conclusion is drawn that the vinyl group can keep its π-conjugation character on the hydrogen-terminated Si(100) [H:Si(100)] surface composed of the dihydride (SiH(2)) groups as well as on hydrogen-terminated Si(111) having the monohydride (SiH) group. The formation mechanism of the PA-Si(100) interface is investigated within cluster ab initio calculations, and the possible structure of the H:Si(100) surface is discussed based on available data.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.