高锰酸钾-亚硫酸钠-核黄素化学发光体系的研究

研究了核黄素在酸性条件下与高锰酸钾和亚硫酸钠发生化学发光反应的行为,建立了流动注射化学发光测定核黄素的新方法。核黄素浓度在１．０×１０＾－７－１．０×１０＾－５ｇ／ｍＬ范围内与化学发光强度呈良好的线性关系,检出限为３×１０＾－８ｇ／ｍＬ。对４．。０×１０＾－７ｇ／ｍＬ的核黄素进行１１次平行测定,得方法的相对标准偏差为１．６％。     

高锰酸钾-甲醛-氨基比林化学发光体系的研究

在甲醛存在下,高锰酸钾与氨基比林能够发生 光反应,产生很强的化学发光,由 此建立了一种测定氨基比林的流动注射化学发光分析法。方法的检出限为３．０×１０＾－５ｇ／Ｌ,相对标准偏差为１．３％,线性范围为１．０×１０＾－４－－８．０×１０＾－２ｇ／Ｌ氨基比林。该法已用于安痛定注射液中氨基比林含量的测定 。     

流动注射化学发光法测定甲氨蝶呤

研究了甲醛增强高锰酸钾与甲氨蝶呤的化学发光反应，由此建立了一种测定甲氨蝶呤的流动性注射化学发光分析法，方法的检出限为３．４×１０＾－９ｇ／ｍＬ，相对标准偏差为１．１％（２．０×１０＾－６ｇ／ｍＬ甲氨蝶呤，ｎ＝１１）线性范围为１．０×１０＾－８～１．０×１０＾－５ｇ／ｍＬ。该法已用于甲氨蝶呤针剂及片剂中甲氨蝶呤含量的测定。     

测定钴的化学发光新体系

研究了新吖啶衍生物９，１０－二甲基吖啶氟磺酸盐的化学发光特性。建立了测定Ｃｏ６２＋的化学发光新体系。方法线性范围为１．０×１０＾－１０－１．０×１０＾－７ｇ／ｍＬ；检测限为５．０×１０＾－１１ｇ／ｍＬＣｏ＾２＋。测定５．０×１０＾－９ｇ／ｍＬＣｏ６２＋的相对标准偏差为６．０％。方法选择性好，用于自来水，江水，池塘水中痕量钴的测定，结果令人满意。     

无机还原剂与光泽精化学发光反应的研究：Ⅱ.钼（Ⅲ）—光泽精化学发光反应

本利用流动注射技术研究了Ｊｏｎｅｓ柱产生的钼（Ⅲ）与光泽精的化学发光反应。建立了痕量相的流动注射化学发光分析法。方法的检出限是１×１０＾－＾１＾１ｇ／ｍｌ；校准曲线的线性范围是１×１０＾－＾１＾０－１×１０＾－＾６ｇ／ｍｌ；相对标准偏差为２．０％（１×１０＾－＾７ｇ／ｍｌ钼，ｎ＝１１）。此法已用于水样的分析，结果令人满意。本还进行了反应机理的探讨。     

鲁米诺-高碘酸钾-抗坏血酸体系化学发光反应的研究与应用

基于抗坏血酸在碱性条件下与高磺酸钾和鲁米诺反应产有强的化学发光,建立了流动注射化学发光测定抗坏血酸的新方法。在碱性条件下的氧化过程易产生过氧化物和超氧自由基,是产生化学发光的关键。该法校准曲线线性范围为６．０×１０＾－６－４．０×１０＾－２ｇ／Ｌ,检出限达８×１０＾－７ｇ／Ｌ,相对标准偏差小于４％,采样频率为１２０次／ｈ。     

偶合反应化学发光法测定痕量银的研究——K4Fe（CN）6—Luminol体系

将Ａｇ（Ｉ）催化Ｋ４Ｆｅ（ＣＮ）６的水合反应与Ｌｕｍｉｎｏｌ同Ｃｕ（ＣＮ）＾２－４的化学发光反应相偶合，建立起一种新的灵敏测定痕量银的化学发光分析法，在所研究的优化条件下，该法测定银的选择性较好，检测限达到４．０×１０＾－１３ｇ／ｍＬＡｇ线性浓度范围为１．０×１０＾－１２～１．０×１０＾－６ｇ／ｍＬＡｇ对４×１０＾－１１ｇ／ｍＬＡｇ（Ｉ）溶液连续１１次测定的ＲＳＤ≤３．５％，用于环境水和岩矿中银的     

流动注射化学发光法测定利血平

研究了利血平在酸性条件下与高锰酸钾和过氧化氢产生化学发光的行为，建立了流动注射化学发光测定利血平的新方法。利血平的浓度在１．０×１０＾－６￣８．０×１０＾－５ｈ／ｍＬ范围内与化学发光强度呈良好的线性关系；检出限为３×１０＾－７ｇ／ｍＬ。对６×１０＾－６ｇ／ｍＬ利血平进行１１次平行测定，得方法的相对标准偏差为１．３％。方法用于药剂中利血平含量测定，结果与药典标准方法测得值一致。     

头孢噻肟钠的降解及其产物伏安行为的研究

头孢噻肟钠在ＮａＯＨ溶液中降解后，于０．１ｍｏｌ／ＬＮａＯＨ中得一灵敏的吸附伏安原峰，Ｅｐ＝－０．７８Ｖ（νｓＡｇ／ＡｇＣｌ），ｉｐ与头孢噻肟钠浓度在１．０×１０＾－＾９－１．０×１０＾－＾８，１．０×１０＾－＾８－１．０×１０＾－＾７，１．０×１０＾－＾７－１．０×１０＾－＾６ｍｏｌ／Ｌ范围内呈线性关系，检出限为５．０×１０＾－＾１＾０ｍｏｌ／Ｌ。用多种电化学手段研究其降解产物的伏安行为，测定了     

新化学发光试剂ITCI的合成及其性能研究

合成一种新化学发光试剂异硫氰酸异鲁米诺（ＩＴＣＩ），研究其化学发光及标记酵母ＲＮＡ的性能。标记反应条件温和快速，１克酵母ＲＮＡ可与１．５×１０－５ｍｏｌＩＴＣＩ结合。建立了测定ＩＴＣＩ和ＲＮＡ的化学发光分析方法，线性范围分别为１．０×１０－１０～１．０×１０－７ｍｏｌ／Ｌ和４．０～×１０－９～２．０×１０－７ｇ／ｍＬ，检测限分别为６．６×１０－１１ｍｏｌ／Ｌ和８．０×１０－１０ｇ／ｍＬ。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.