Synthesis and characterization of sulfonated polyimide membranes for direct methanol fuel cell

The sulfonated polyimide (SPI) membranes for direct methanol fuel cell (DMFC) were synthesized with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), 2,2′-benzidinedisulfonic acid (BDSA), 4,4′-oxydianiline (ODA) through classical two-step methods: (1) preparation of sulfonated poly(amic acid) (SPAA) precursors with different sulfonation levels by controlling the molar ratio of BDSA to ODA, and (2) thermal imidization of the SPAA films. The chemical structure and the imidization from SPAA membranes were characterized by FT-IR with temperature, and the sulfonation levels were determined by elemental analysis. The thermal stability of the membranes was also characterized by TGA. From water uptake and small angle X-ray scattering (SAXS) experiments for different sulfonation levels, it was found that the number of water clusters in SPI membranes increased as the water uptake of membranes increased, but the size of water cluster was not changed with the sulfonation levels. The proton conductivity and the methanol permeability of SPI membrane showed a sudden leap like a percolation phenomenon around 35 mol% of sulfonation level. The SPI membranes exhibited relatively high proton conductivity and extremely low methanol permeability, and showed the feasibility of suitable polymer electrolyte membranes (PEM) for DMFC.     

Acid–base polyimide blends for the application as electrolyte membranes for fuel cells

The synthesis and characterization of new acid–base polymer blend membranes for the use in polymer electrolyte membrane fuel cell is presented in this paper. A novel polymeric base is synthesized from 1,4,5,8-naphthalenetetracarboxylic dianhydride, 2-bis [4-(4-aminophenoxy)phenyl] hexafluoropropane and diaminoacrydine hemisulfate where the diaminoacrydine hemisulfate contribute the tertiary nitrogen groups to the polyimide backbone. This base polyimide is blended with a polyimide having sulfonic acid group in the main chain. The sulfonated polyimide is synthesized from 1,4,5,8-naphthalene-tetracarboxylic dianhydride (NTDA), 4,4′-diaminobiphenyl 2,2′-disulfonic acid (BDSA), 2-bis [4-(4-aminophenoxy)phenyl] hexafluoropropane (HFBAPP). Various polyimide blends having different molar ratio of sulfonic acid group and acrydine group are synthesized and they are characterized for thermal stability, ion exchange capacity, water uptake, hydrolytic stability and proton conductivity. All the sulfonated polyimides have good thermal stability and exhibited three-step degradation pattern. With the increase in polymeric base content, IEC decreased as AB-0% (2.0640) > AB-10% (2.0058) > AB-20% (1.8792) > AB-30% (1.5686) > AB-40% (1.2670) > AB-50% (1.1690) > AB-75% (0.9098) and water uptake decreased as AB-0% (34.06%) > AB-10% (32.82%) > AB-20% (24.01%) > AB-30% (20.31%) > AB-40% (12.86%) > AB-50% (9.25%) > AB-75% (8.37%). Proton conductivity of the acid–base polyimide blends at 90 °C are AB-0% (0.197) > AB-10% (0.124) > AB-20% (0.122) > AB-30% (0.088) > AB-40% (0.080) > AB-50% (0.034) > AB-75% (0.025). Polyimide blends showed higher hydrolytic stability than the pure acid polyimide. Between the polyimide blends the hydrolytic stability increased with increase in the base polymer content which is attributed to the increase in ionic crosslink density which reduces the polymer swelling and hence the mechanical stability of the membrane increases.     

Synthesis and characterization of sulfonated homo‐ and co‐polyimides based on 2,4 and 2,5‐diaminobenzenesulfonic acid for proton exchange membranes

A series of sulfonated homo‐ and random co‐polyimides (co‐SPI) based on 2,4‐diaminobenzenesulfonic acid (2,4‐DABS) and 2,5‐diaminobenzenesulfonic acid (2,5‐DABS) has been synthesized via conventional two‐step polyimidization method. 2,4‐DABS and 2,5‐DABS were used as sulfonated diamine compounds, 4,4′‐oxydianiline (ODA) and 4,4′‐diaminodiphenyl sulfone (DDS) were used as non‐sulfonated diamine compounds. Mixtures of sulfonated and non‐sulfonated diamine compounds were reacted with benzophenonetetracarboxylic dianhydride (BTDA) to obtain co‐SPI membranes. Molar ratios of sulfonated to non‐sulfonated diamine were systematically varied to produce copolymers of controlled compositions. The co‐SPIs were evaluated for thermal oxidative stability, ion exchange capacity (IEC), water uptake, proton conductivity, solubility, and hydrolytic stability. Proton conductivity and hydrolytic stability of the co‐SPIs were compared with the fully aromatic polyimide, homo‐SPIs (BTDA/2,4‐DABS and BTDA/2,5‐DABS). Regarding thermogravimetric analysis (TGA) analysis, it is concluded that desulfonation temperature in the range of 200–350°C suggests high stability of sulfonic acid groups. co‐SPIs with 40 mol% of 2,4‐DABS showed similar or higher proton conductivity than Nafion® 117 in water. Proton conductivity values of the co‐SPIs were mainly a function of IEC and water uptake. Consequently, the optimum concentration of 2,4‐DABS was found to be in the range of 30–40 mol% from the viewpoint of proton conductivity, IEC, and hydrolytic stability. Copyright © 2008 John Wiley & Sons, Ltd.     

Crosslinked sulfonated polyimide networks as polymer electrolyte membranes in fuel cells

Sulfonated polyimides with tertiary nitrogen in the polymer backbone were synthesized with 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid, 2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane, and diaminoacrydine hemisulfate. They were crosslinked with a series of dibromo alkanes to improve the hydrolytic stability. The crosslinked sulfonated polyimide films were characterized for their thermal stability, ion‐exchange capacity (IEC), water uptake, hydrolytic stability, and proton conductivity. All the sulfonated polyimides had good thermal stability and exhibited a three‐step degradation pattern. With an increase in the alkyl chain length of the crosslinker, IEC decreased as 1.23 > 1.16 > 1.06 > 1.01, and the water uptake decreased as 7.29 > 6.70 > 6.55 > 5.63. The order of the proton conductivity of the crosslinked sulfonated polyimides at 90 °C was as follows: polyimide crosslinked with dibromo butane (0.070) > polyimide crosslinked with dibromo hexane (0.055) > polyimide crosslinked with dibromo decane (0.054). The crosslinked polyimides showed higher hydrolytic stability than the uncrosslinked polyimides. Between the crosslinked polyimides, the hydrolytic stability decreased with an increase in the alkyl chain length of the crosslinker. The crosslinked and uncrosslinked sulfonated polyimides exhibited almost the same proton conductivities. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2370–2379, 2005     

The effect of crosslinked networks with poly(ethylene glycol) on sulfonated polyimide for polymer electrolyte membrane fuel cell

To investigate the effect of crosslinking by a hydrophilic group on a sulfonated polyimide electrolyte membrane, sulfonated polyimide end‐capped with maleic anhydride was synthesized using 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl, 2,2′‐disulfonic acid, 2‐bis [4‐(4‐aminophenoxy)phenyl] hexafluropropane and maleic anhydride. The sulfonated polyimides end‐capped with maleic anhydride were self‐crosslinked or crosslinked with poly(ethylene glycol) diacrylate. A series of the crosslinked sulfonated polyimides having various ratios of sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and compared with uncrosslinked and self‐crosslinked sulfonated polyimides. The synthesized sulfonated polyimide films were characterized for FTIR spectrum, thermal stability, ion exchange capacity, water uptake, hydrolytic stability, morphological structure, and proton conductivity. The formation of sulfonated polyimide was confirmed in FTIR spectrum. Thermal stability was good for all the sulfonated polyimides that exhibited a three‐step degradation pattern. Ion exchange capacity was the same for both the uncrosslinked and the self‐crosslinked sulfonated polyimides (1.30 mEq/g). When the crosslinked sulfonated polyimides with poly(ethylene glycol) were compared, the ion exchange capacity was decreased as 1.27 > 1.25 > 1.23 mEq/g and water uptake was increased as 23.8 < 24.0 < 24.3% with the increase in poly(ethylene glycol) diacrylate content. All the crosslinked sulfonated polyimides with poly(ethylene glycol) diacrylate were stable for over 200 h at 80 °C in deionized water. Morphological structure and mean intermolecular distance were obtained by WAXD. Proton conductivities were measured at 30, 50, 70, and 90 °C. The proton conductivity of the crosslinked sulfonated polyimides with poly(ethylene glycol) diacrylate increased with the increase in poly(ethylene glycol) diacrylate content despite the fact that the ion exchange capacity was decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1455–1464, 2005     

Structure–property correlations of sulfonated polyimides. I. Effect of bridging groups on membrane properties

A series of six‐membered sulfonated polyimides were synthesized using 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid as the sulfonated diamine, and various nonsulfonated diamine monomers having different bridging groups. These bulky bridging groups have the capacity to increase hydrolytic stability and proton conductivity. Polyimides with bulky bridging groups showed increased solubility but exhibited lower thermal stability. The ion exchange capacity and water uptake reduced with increase in the bulkiness of the bridging group. This was attributed to the increase in the molecular weight of the repeating unit and hence effectively reduced the sulfonic acid content. In low temperatures, the conductivity was lower than Nafion®115 and, with increase in temperature, the conductivity rapidly increased and exhibited better conductivity than Nafion®115. Polyimides with bulky bridging groups 4‐amino phenyl sulfone, and 2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane showed higher conductivity than other polyimides and Nafion®115 despite low ion exchange capacity. The hydrolytic stability of the polyimides with bulky bridging groups was higher than the polyimides with less bulky atoms because of the imparted flexibility. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3612–3620, 2004     

Preparation and characterization of sulfonated polyimide ionomers via post‐sulfonation method for fuel cell applications

This paper describes our work on the synthesis of a series of sulfonated homo‐/co‐polyimides (SPI) which were obtained by post‐sulfonation method over three steps. In the first step, 4,4′‐oxydianiline (ODA) and 4,4′‐diaminodiphenylsulfone (DDS) dissolved in N‐methyl pyrrolidone (NMP) were reacted with benzophenonetetracarboxylic dianhydride (BTDA) in order to yield poly(amic acid) (PAA). Secondly, precipitated PAA was sulfonated via concentrated sulfuric acid (95–98%) at room temperature to give post‐sulfonated PAA (PSPAA). Finally, PSPAA was converted into post‐sulfonated PI (PSPI) by the thermal imidization method. PSPIs with ion exchange capacity (IEC) ranging from 0.20 to 0.67 meq/g were prepared. The thermal properties of the PSPIs were evaluated and high desulfonation temperature was found in the range of 190–350°C, suggesting the high stability of sulfonic acid groups. In water, PSPI‐5 membrane displayed similar proton conductivity to Nafion®117, whereas this membrane showed poor conductivity in dry state. All PSPIs displayed good solubility in common polar aprotic solvents such as NMP and dimethylacetamide (DMAc). Furthermore, the effects of post‐sulfonation reaction on chemical structure, thermal oxidative behavior, and physical properties of the PSPI membranes such as membrane quality/stability and water uptake were discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel sulfonated naphthalenic polyimides as proton conductive membrane for DMFC applications

To prepare proton conductive membrane for direct methanol fuel cells (DMFC), a novel sulfonated aromatic diamine monomer, 1,4-bis(4-amino-2-sulfonic acid-phenoxy)-benzene (DSBAPB) was synthesized and characterized by ¹H NMR and FT-IR. Then a series of sulfonated polyimides (SPIs) were prepared from DSBAPB with 1,4,5,8-naphthalene tetracarboxylic dianhydride (NTDA) and a non-sulfonated diamine, 4,4′-oxydianiline (ODA) via one-step high-temperature polymerization method. The sulfonation degree of the SPIs can be controlled by changing the mole ratio of sulfonated monomer to non-sulfonated monomer. The obtained SPI membranes exhibit desirable proton conductivity ranged from 7.9 × 10⁻³ to 7.2 × 10⁻² S cm⁻¹ and low methanol permeability of less than 2.85 × 10⁻⁷ cm² s⁻¹. Furthermore, the hydrolysis stability of the obtained SPIs is better than the BDSA based SPIs caused by the flexible structure.     

Synthesis, water stability and proton conductivity of novel sulfonated polyimides from 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid

A novel sulfonated diamine monomer, 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid (BAPBDS) with the high basisity and flexible structure was synthesized by direct sulfonation of 4,4′-bis(4-aminophenoxy)biphenyl (BAPB). Sulfonated polyimides (SPIs) were prepared from 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA), BAPBDS and nonsulfonated diamines such as BAPB. The SPI membranes showed much higher water stability at high temperatures than other sulfonated diamine-based SPIs reported so far. Their water vapor sorption isotherm, water uptake (WU), density, dimensional change and proton conductivity σ were investigated. The SPIs showed rather isotropic dimensional changes with WU and the volume increases were slightly smaller than those estimated from the additivity. The SPIs with ion exchange capacities (IECs) of 1.9–2.7 meq/g displayed the similar relationship between σ and WU each other, which was different from those of Nafion 117 and also of the SPIs with the lower IECs. The former SPIs showed reasonably high σ values of 10⁻² S/cm or more even at WU of 25 g/100 g dry polymer under 70% RH at 50 °C, whereas the latter showed the similarly high σ values only in liquid water, but not in the nearly saturated water vapor.     

Sul-containing fluorinated polyimides for optical waveguide device

Novel sul-containing fluorinated polyimides have been synthesized by the reaction of 2,2′-bis-(trifluoromethyl)-4,4′-diaminodiphenyl sulfide (TFDAS) with 1,4-bis-(3,4-dicarboxyphenoxy)benzene dianhydride (HQDPA), 2,2′-bis-(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), 4,4′-oxydiphthalicanhydride (ODPA) or 3,4,3′,4′-biphenyl-tetracarboxylic acid dianhydride (s-BPDA). The fluorinated polyimides, prepared by a one-step polycondensation procedure, have good solubility in many solvents, such as N-methyl-2-pyrrolidinone (NMP), dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), cyclohexanone, tetrahydrofuran (THF) and m-cresol. The molecular weights (M_n's) and polydispersities (M_n/M_w's) of polyimides were in the range of 1.24 × 10⁵ to 3.21 × 10⁵ and 1.59–2.20, respectively. The polymers exhibit excellent thermal stabilities, with glass-transition temperatures (T_g) at 221–275 °C and the 5% weight-loss temperature are above 531 °C. After crosslinking, these polymers show higher thermal stability. The films of polymers have high optical transparency. The novel sul-containing fluorinated polyimides also have low absorption at both 1310 and 1550 nm wavelength windows. Rib-type optical waveguide device was fabricated using the fluorinated polyimides and the near-field mode pattern of the waveguide was demonstrated.     

Effects of tetracarboxylic dianhydrides on the properties of sulfonated polyimides

A series of sulfonated polyimides (SPIs) were synthesized from a sulfonated diamine of 4,4′‐bis(4‐aminophenoxy) biphenyl‐3,3′‐disulfonic acid (BAPBDS), common nonsulfonated diamines, and various tetracarboxylic dianhydrides including 1,4,5,8‐naphthalene tetracarboxylic dianhydride (NTDA), 3,4,9,10‐perylene tetracarboxylic dianhydride (PTDA), 4,4′‐binaphthyl‐1,1′,8,8′‐tetracarboxylic dianhydride (BTDA), 4,4′‐ketone dinaphthalene 1,1′,8,8′‐tetracarboxylic dianhydride (KDNTDA), and isophthatic dinaphthalene 1,1′,8,8′‐tetracarboxylic dianhydride (IPNTDA). Their membrane properties were investigated to clarify the effects of the dianhydrides. They displayed reasonably high mechanical properties, thermal stability, and proton conductivity. The dianhydrides with flexible and non‐coplanar structure (IPNTDA > KDNTDA > BTDA) led to the better solubility of the SPIs than those with rigid and coplanar one (NTDA, PTDA). The dianhydride with the smaller molecular weight led to the larger value of the number of sorbed water molecules per sulfonic acid group (λ) in membrane, that is, NTDA (λ: 17) > PTDA (15) > BTDA (14) > KDNTDA (12) > IPNTDA (10), and as a result let to the larger proton conductivity in water. All of the BAPBDS‐based SPIs showed the anisotropy in membrane swelling and in proton conductivity, of which the degree hardly depended on the dianhydride moieties. The water stability of SPI membranes against the aging in water at 130 °C for 192 h was in the order, PTDA = NTDA ≧ BTDA > KDNTDA > IPNTDA. The hydrolysis stability of polymer chain was similar between the BTDA‐ and KDNTDA‐based SPIs. These results are discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 905–915, 2010     

Structure–property correlations of sulfonated polyimides. II. Effect of substituent groups on membrane properties

A series of sulfonated polyimides with increasing alkyl substituents in the o‐position to diamine were synthesized from 4,4′‐methylene dianiline, 4,4′‐diamine‐3,3′‐dimethyl‐diphenylmethane, and 4,4′‐diamine‐3,5,3′,5′‐tetraethyl‐diphenylmethane using 1,4,5,8‐naphthalenetetracarboxylic dianhydride and perylenetetracarboxylic dianhydride by chemical imidization method. 4,4′‐Diaminobiphenyl 2,2′‐disulfonic acid was used as sulfonated diamine. The variation in the membrane properties with increase in substitution was analyzed. Solubility increased with substitution whereas the thermal stability decreased with increase in substitution. Ion exchange capacity and water uptake reduced with increase in substitution because of the low sulfonic acid content at a particular weight due to the increased molecular weight of the repeating unit. The conductivity of the substituted diamines was higher than the unsubstituted diamines at higher temperature regardless of low ion exchange capacity and water uptake. The increase in conductivity with increase in temperature was more rapid in polyimides than in Nafion®115. Hydrolytic stability of the polyimides with substitution is more than the unsubstituted diamines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3621–3630, 2004     

Studies on polyimide imidization in far‐infrared radiation

In this paper, the monomers 4,4′‐oxydiphthalic anhydride (ODPA), 3,3′,4,4′‐biphenyl dianhydride (BPDA), 3,4′‐oxidianiline (3,4′‐ODA), and 4,4′‐oxidianiline (4,4′‐ODA) were selected to synthesize polyimides (PI) or copolyimides (co‐PI) in N,N‐dimethyl acetamide (DMAc) by two‐step method. To control the PI molecular weight (MW), phthalic anhydride (PA) was used as the end‐capping reagent. The effect of far‐infrared radiation (FIR) on PI imidization was investigated by Fourier transform infrared spectroscopy (FTIR). Some factors affecting imidization process in FIR were discussed, including PI imidization time and temperature, molecular structure, designed number average molecular weight, crystalline, imidization procedure, film thickness, polyamide acid (PAA) solid content, and so forth. The PI imidization process in FIR will be affected by all these factors. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3621–3627, 2005     

异构化对二苯醚二酐/二苯醚二胺聚酰亚胺结晶行为的影响

合成了一系列基于4,4-′ODPA,3,4-′ODPA以及3,3-′ODPA 3种异构二苯醚二酐单体的异构聚酰亚胺,以苯酐(PA)作为封端剂来控制分子量.用DSC和WAXD为主要手段研究了这几种异构聚酰亚胺的结晶行为.研究发现聚酰亚胺4,4-′ODPA/ODA(二苯醚二胺)在分子量较低的情况下能够在热处理,退火或剪切作用下结晶.并且升高热处理温度和延长热处理时间有利于结晶的完善,在玻璃化温度以上施加剪切能够加速聚酰亚胺的结晶.而对于其他的两种异构体3,4-′ODPA/ODA以及3,3-′ODPA/ODA无论是经过热处理还是施加外力剪切都未能使其结晶.     

Synthesis and characterization of novel polyimides bearing a side chain composed of stilbene mesogen and undecyl spacer and the alignment ability of nematic liquid-crystal molecules

Four different polyimides with side chains containing undecyl spacers and 4-fluorostilbene mesogen end groups were prepared, and their structures and the controllability of the liquid-crystal (LC) alignment with rubbing were investigated. From X-ray scattering and differential scanning calorimetry data, pyromellitic dianhydride (PMDA)-, benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (BTDA)-, and 4,4′-oxydi(phthalic anhydride) (ODPA)-based polyimides were shown to have layered structures and short-range ordering. Pretilt angles of LCs on the rubbed surfaces were 1–9°, depending on the rubbing density and backbone. In particular, the long undecyl spacers caused the mesogenic stilbene end groups to lie next to the main chain, resulting in a reduction in the pretilt angles. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1800–1809, 2001     

Synthesis and properties of novel sulfonated polyimides containing phthalazinone moieties for PEMFC

A novel sulfonated diamine, 1,2-dihydro-2-(3-sulfonic-4-aminophenyl)-4-[4-(3-sulfonic-4-aminophenoxy)-phenyl]-phthalazin-1-one(S-DHPZDA), was successfully synthesized and two series of six-membered sulfonated polyimides (SPIs) were prepared from 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA), S-DHPZDA, and nonsulfonated diamines DHPZDA or 4,4′-diaminodiphenyl ether (ODA). The chemical structure of the S-DHPZDA and the SPIs were characterized by ¹H NMR and FT-IR. Tough, brownish and transparent membranes were cast from SPIs’ solution in NMP. The water uptake, swelling ratio, chemical and thermal stability, hydrolytic and oxidative stability as well as proton conductivity of these new polymers were investigated systematically. Compared with Nafions, the obtained SPI membranes have onset decomposed temperatures of these two series SPIs were above 318 °C and decomposed temperature of main chain were 565 °C and excellent dimension stabilities on similar IECs. Introduction of phthalazinone moieties had improved the copolyimides’ solubility in polar aprotic organic solvents like m-cresol, NMP, DMSO, DMF etc. The SPIs had high proton conductivity (σ) in the order of magnitude of 10⁻³ to 10⁻² S cm⁻¹ depending on the degree of sulfonation (DS) of the polymers.     

Preparation and properties of ionic cross‐linked sulfonated copolyimide membranes containing pyrimidine groups

A series of sulfonated copolyimides containing pyrimidine groups (SPIs) were synthesized by random copolymerization of 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), 2‐(4‐aminophenyl)‐5‐aminopyrimidine (PAPRM), and 4,4′‐diaminodiphenyl ether‐2,2′‐disulfonic acid (ODADS). Proton exchange treatment in 1.0 M sulfuric acid solution resulted in ionic cross‐linking of the sulfonated copolymers due to the acid (sulfonic acid)‐base (pyrimidine group) interactions and the membrane with more basic PAPRM moiety could absorb sulfuric acid to favor the proton transfer. The effects of the structure of the diamines on the properties of SPI membranes were evaluated by studying the membrane parameters including water uptake, proton conductivity, water stability, and methanol permeability. The basic pyrimidine groups introduced in the main chains could effectively resist membrane swelling due to the strong interchain interactions through basic pyrimidine groups and sulfonic acid groups. Compared with the corresponding uncross‐linked copolyimides (NTDA/ODADS/ODA), the acid–base copolyimides displayed excellent water stability. The SPI membranes also exhibited improved mechanical properties and decreased methanol permeability. However, the cross‐linked membranes showed lowered proton conductivities than the uncross‐linked ones because a small part of the sulfonic acid groups had been consumed during the cross‐linking process. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of epoxy‐based semi‐interpenetrating polymer networks sulfonated polyimides proton‐exchange membranes for direct methanol fuel cell applications

Novel epoxy‐based semi‐interpenetrating polymer networks (semi‐IPNs) of aromatic polyimide, derived from 2,2‐benzidinedisulfonic acid (BDSA), were prepared through a thermal imidization reaction. Dynamic scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) were utilized to verify the synchronization of the imidization of sulfonated poly(amic acid) (SPAA) and the crosslinking reactions of epoxy. The semi‐IPNs of epoxy/sulfonated polyimides (SPI‐EPX) exhibit excellent film‐forming characteristics and mechanical integrity at room temperature. Conductivities at 100 °C of 0.0243 S cm^?1 (SPI‐EP30) and 0.0141 S cm^?1 (SPI‐EP50) were obtained, which are similar to that of the Nafion 117 (0.0287 S cm^?1). The increase in the conductivity of SPI‐EP(30,40) with temperature is more rapid than that of Nafion 117. The SPI‐EPX exhibited lower methanol permeability than did Nafion117. The hydrolytic stability of the SPI‐EPX was followed by FTIR spectroscopy at regular intervals. SPI‐EPX prepared using epoxy‐based semi‐IPNs of sulfonated polyimide, SPI‐EP(40,50), exhibited higher hydrolytic stability than the phthalic polyimides (five‐membered ring polyimides).The microstructure was analyzed using atomic force microscopy (AFM) in the tapping mode, which demonstrated that SPI‐EP50 exhibited a nanophase that was separated into an essentially reticulated and venous hydrophobic and hydrophilic domains. Transmission electron microscopy (TEM) confirmed widespread and well‐connected hydrophilic domains, proving the higher hydrolytic stability and strong proton‐transporting properties of the SPI‐EPX membrane. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2262–2276, 2008     

Synthesis and characterization of novel polyimides containing stilbene unit in the side chain and their controllability of nematic liquid crystal alignment on the rubbed surfaces

Four polyimides containing hexylene spacer and a fluorostilbene unit in the side chains were prepared in thin‐film form by two‐step condensation of 3,3′‐bis[(4′‐fluoro‐4‐stilbenyl)oxyhexyloxy]‐4,4′‐biphenyldiamine (FS6B) with pyromellitic dianhydride (PMDA), benzophenone‐3,3′,4,4′‐tetracarboxylic dianydride (BTDA), 4,4′‐oxydi(phthalic anhydride) (ODPA), and 4,4′‐hexafluoroisopropylidenedi(phthalic anhydride) (6FDA), respectively, and their controllability of liquid crystal (LC) alignment on rubbed surfaces was investigated. Pretilt angles of LCs were achieved in the 2–9° range, depending on the rubbing density and backbone structures. The effect of the mesogenic stilbene group on the pretilting of LCs was distinctive in FS6B‐PMDA. Contact‐angle measurements on thin films annealed at 120 °C revealed that FS6B‐PMDA potentially had the better alignment stability than FS6B‐6FDA. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3622–3632, 2001     

Synthesis and Characterization of Sulfonated Polyimides Containing Trifluoromethyl Groups as Proton Exchange Membranes

A novel sulfonated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy) biphenyl 3,3′‐disulfonic acid (F‐BAPBDS), was successfully synthesized by nucleophilic aromatic substitution of 4,4′‐dihydroxybiphenyl with 2‐chloro‐5‐nitrobenzotrifluoride, followed by reduction and sulfonation. A series of sulfonated polyimides of high molecular weight (SPI‐x, x represents the molar percentage of the sulfonated monomer) were prepared by copolymerization of 1,4,5,8‐naphathlenetetracarboxylic dianhydride (NTDA) with F‐BAPBDS and nonsulfonated diamine. Flexible and tough membranes of high mechanical strength were obtained by solution casting and the electrolyte properties of the polymers were intensively investigated. The copolymer membranes exhibited excellent oxidative stability due to the introducing of the CF₃ groups. The SPI membranes displayed desirable proton conductivity (0.52×10⁻¹–0.97×10⁻¹ S·cm⁻¹) and low methanol permeability (less than 2.8×10⁻⁷ cm²·s⁻¹). The highest proton conductivity (1.89×10⁻¹ S·cm⁻¹) was obtained for the SPI‐90 membrane at 80°C, with an IEC of 2.12 mequiv/g. This value is higher than that of Nafion 117 (1.7×10⁻¹ S·cm⁻¹). Furthermore, the hydrolytic stability of the obtained SPIs is better than the BDSA and ODADS based SPIs due to the hydrophobic CF₃ groups which protect the imide ring from being attacked by water molecules, in spite of its strong electron‐withdrawing behaviors.