Self-host yellow iridium dendrimers based on carbazole dendrons: synthesis,characterization and application in solution-processed organic light-emitting diodes

On the basis of different generation carbazole dendrons, a series of self-host yellow Ir dendrimers (Y-G0, Y-G1 and Y-G2) have been successfully synthesized and characterized in detail. It is found that the peripheral dendrons can effectively reduce the intermolecular interactions between emissive Ir cores, as verified by the increased photoluminescence quantum yields and film lifetimes. Among these dendrimers, Y-G2 bearing the second generation dendrons shows the best non-doped device performance, revealing a peak luminous efficiency of 20.2 cd/A. The value is nearly twice that of Y-G0 without any dendrons, which could be further improved to 32.1 cd/A by dispersing Y-G2 into a host matrix. We believe that this work will shed light on the development of highly efficient yellow phosphorescent dendrimers with a self-host strategy.     

Novel, yellow-emitting anthracene/fluorene oligomers: synthesis and characterization

A novel series of highly soluble and strongly yellow fluorescent with well-controlled, alternative anthracene, and fluorene units were successfully synthesized by a Pd/Cu-catalyzed Sonogashira coupling reaction and characterized. Their thermal stabilities, electrochemical behaviors, and photophysical properties were investigated. These oligomers might be used as models to study structure-property relationship for their corresponding polymers and applied in optoelectronics devices as materials themselves.     

Host copolymers containing pendant carbazole and oxadiazole groups: Synthesis,characterization and optoelectronic applications for efficient green phosphorescent OLEDs

Vinyl copolymers (PCOn), containing pendant carbazole and aromatic 1,3,4‐oxadiazole attached with dodecyloxy group, were prepared from their corresponding precursor poly(9‐vinyl carbazole‐co‐4‐vinylbenzyl chloride) (PCBn) by the Williamson condensation (n: mole% of 4‐vinylbenzyl chloride). These copolymers were used as host materials for green phosphorescent light‐emitting diodes after blending 4 wt % of Ir(ppy)₃. PL spectra of the PCOn films showed the formation of excimer or exciplex. The phosphorescent EL devices were fabricated with a configuration of ITO/PEDOT:PSS/host copolymers:Ir(ppy)₃/BCP/Ca/Al. The PL and EL spectra of the blends [PCOn:Ir(ppy)₃] revealed dominant green emission at 517 nm attributed to Ir(ppy)₃ due to efficient energy transfer from the host to Ir(ppy)₃. Efficient green phosphorescent OLEDs was obtained when employing copolymer PCO16 as the host and Ir(ppy)₃ as the guest. The maximal luminance efficiency and the maximal luminance of this device were 17.9 cd/A and 19,903 cd/m², respectively. After doped with Ir(ppy)₃, the morphology of the films, both controlled PCO20 and PCO20 with attached dodecyloxy groups, were investigated by tapping‐mode AFM and FE‐SEM. The film of PCO20 exhibited uniform, featureless image and showed much better device performance than PCO20, which have been attributed to good compatibility of PCO20 with Ir(ppy)₃. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5180–5193, 2008     

Investigating carbazole jacketed precursor dendrimers: sonochemical synthesis, characterization, and electrochemical crosslinking properties

Precursor carbazole terminated dendrons and dendrimers up to generation four (G4-D) were synthesized using a convergent approach. Sonication as a means of facilitating organic reactions in dendrimer chemistry was explored resulting in very facile and very fast (up to 50x) reaction times compared to those using traditional reflux conditions. The limits of peripheral group functionality were explored as a function of generation. The electrochemical cross-linking of the dendrimers as thin films revealed unusual cyclic voltammetry (CV) behavior depending upon the generations, which were significantly different from their linear counterpart, Poly(N-vinylcarbazole) (PVK). G1-D showed a higher extent of intermolecular cross-linking while G4-D showed a higher extent of intramolecular cross-linking. The formed films were optically clear and possess superior energy band gap properties making them an alternative candidate over PVK for future hole-transport layer materials in electro-optical devices.     

Molecularly defined caprolactone oligomers and polymers: synthesis and characterization

The synthesis of molecularly defined epsilon-caprolactone oligomers and polymers up to the 64-mer, via an exponential growth strategy, is described. By careful selection of orthogonal protecting groups, t-butyldimethylsilyl (TBDMS) ether for the hydroxyl group and benzyl (Bn) ester for the carboxylic acid group, a highly efficient synthetic strategy was developed with yields for both deprotection steps being essentially quantitative and for the coupling reactions using 1,3-dicyclohexylcarbodiimide (DCC), yields of 80-95% were obtained even at high molecular weights. This allows monodisperse dimers, tetramers, octamers, 16-mers, 32-mers and 64-mers to be prepared in gram quantities and fully characterized using mass spectroscopy, size exclusion chromatography (SEC), and IR and NMR spectroscopy. Thermal and physical properties were measured using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and small-angle X-ray scattering (SAXS). These results conclusively show a distinct structure/property relationship with a close correlation between the number of repeat units and physical properties. In addition, a number of marked differences were observed on comparison with the parent poly(caprolactone) polymer.     

Nonpeptidic foldamers from amino acids: synthesis and characterization of 1,3-substituted triazole oligomers

Nonpeptidic foldamers capable of displaying protein-like functionality were prepared by swapping amide bonds with 1,2,3-triazole rings. The overall conformation of these triazole oligomers is largely dictated by dipole-dipole interactions between adjacent rings. Solution NMR studies suggest that a zigzag conformation, which closely mimics the beta-strand structure, predominates in two different tetramers.     

Rhodanine-based biologically active molecules: synthesis,characterization, and biological evaluation

To investigate the antimicrobial properties of the rhodanine (2-thioxo-4-thiazolidinone) structure, several 2-[(5Z)-5-benzylidene-4-oxo-2-thioxo-1,3-thiazolidin-3-yl]-N-phenylacetamide derivatives were synthesized by use of an efficient procedure. Variation of the functional group on the 5-benzylidine ring of rhodanine led to compounds containing a 2-thioxo-4-thiazolidinone group attached to N-phenyl acetamide. The chemical structures of the compounds were confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy, ESI mass spectrometry, and elemental analysis. The antibacterial and antifungal activity of the compounds were tested, at seven concentrations, against Gram-positive bacterial strains (Pseudomonas aeruginosa ATCC 27853 and Escherichia coli ATCC 25922), Gram-negative bacterial strains (Staphylococcus aureus ATCC 25923 and Bacillus subtilis ATCC 11774), and fungal strains (Candida albicans ATCC 66027 and Aspergillus niger ATCC 6275), by use of the Kirby Bauer disk-diffusion technique and the serial broth dilution technique. The results obtained were compared with those for reference drugs. Relationships between structure and their antimicrobial activity are discussed.     

Metal oxide nanoparticles: synthesis, characterization and application

The synthesis of metal oxide nanoparticles is described in terms of precursor formation, nucleation, growth, and aging processes. The main parameters governing these processes are the solution properties, including the solvent viscosity, dielectric constant and the presence of adsorbing anions, the solubility of the metal oxide, and the metal oxide surface energy.     

Synthesis, characterization, and application of indolo[3,2-b]carbazole semiconductors

The synthesis, characterization, and field-effect transistor (FET) properties of new indolo[3,2-b]carbazoles are described. In particular, an extensive characterization of their crystal structures has revealed the importance of the nature of the side chains (alkyl, phenyl, thienyl substituents) on their solid-state organization. These organic materials have exhibited p-type FET behavior with hole mobilities as high as 0.2 cm2 V(-1) s(-1) with an on/off current ratio higher than 10(6). Best results were obtained with phenyl-substituted indolo[3,2-b]carbazoles since the presence of phenyl substituents seems to allow efficient overlap between the oligomeric molecules. More importantly, FET properties were kept constant during several months in air.     

Pyrene-cored dendrimer with carbazole derivatives as dendrons: synthesis, properties and application in white light-emitting diode

A new dendrimer using pyrene as core and carbazole derivative as dendron has been successfully prepared via Suzuki coupling reaction. Its chemical structure was confirmed through (1)H NMR, elemental analysis and MALDI-TOF MS methods. The dendrimer synthesized possessed excellent thermal stability with initial decomposition temperature over 470 °C and high fluorescence quantum yield of 86%. The luminescence spectra showed that, relative to the solution sample, the emission peaks of the solid dendrimer film were apparently broadened and red-shifted, indicating the strong π-π stacking effect between the pyrene moieties. By doping 1.5% of the dendrimer in 4,4'-bis[N-(1-naphthyl)-N-phenylamino]biphenyl (NPB), a light-emitting diode device was fabricated in the ITO/NPB/NPB:dendrimer (1.5%)/TPBI/Mg:Ag configuration, which emitted a white color with Commission Internationale de L'Eclairage (CIE(x,y)) coordinates of (0.29, 0.34) and a maximum brightness of 1300 cd m(-2), exhibiting promising potential in white light-emitting diode application.     

Intermolecular interactions in pi-stacked conjugated molecules. Synthesis,structure, and spectral characterization of alkyl bithiazole oligomers

Syntheses are reported of new 4,4'-dialkyl-2,2'-bithiazole oligomers that have alkenoxy side chains that are capable of easy conversion to oligomers with functionalized side chains, e.g., terminally substituted hydroxy chains. The crystal structures of two representative oligomers (4,4',4' ',4' "-tetra-(2-propenoxymethyl)-2,2',5',5' ',2' ',2' "-quaterthiazole (3P2) and 4,4',4' ',4' "-tetra-(3-hydroxypropyloxymethyl)-2,2',5',5' ',2' ',2' "-quaterthiazole (3H2)) were determined; 3P2 crystallizes in a pi-stacked motif with two molecules per unit cell, whereas 3H2 forms pi-stacks that are linked with hydrogen bonds to form infinite two-dimensional sheets with one molecule per unit cell. A comparison of the UV-vis spectra of the compounds in solution and in the solid state provides unequivocal evidence for the presence of a Davydov splitting, W(D) approximately 0.2 eV, in solid 3P2. The spectra are interpreted in the framework of molecular exciton theory to extract a value of the intermolecular transfer integral, J approximately 0.2 eV, for a total exciton bandwidth of ca. 0.8 eV. Monte Carlo calculations were used to determine the density of states of the exciton band and the absorption and emission line shapes of the 0 <-- 0 transition. It is suggested that the "three-humped" absorption profile typical of partially crystalline, regioregular polymers is the "optical signature" of pi-stacking.     

New polyfunctional dendritic linear hybrids from terminal amine polyether oligomers (Jeffamine): synthesis and characterization

New dendritic polyether oligomers were synthesized from three different Jeffamines^® and characterized. This class of polyfunctional oligomers, bearing on their surface methylester, carboxylic acid, nitrile or amine groups, could be interesting modifying agents to change the properties of materials. The optimization of the iterative synthetic methods, through Michael addition, hydrolysis or hydrogenation, gave first and second generation dendritic structures in good yields.     

Hydroxyl-terminated dendritic oligomers from bile acids: synthesis and properties

[reaction: see text] The high reactivity of the chloroacetyl group has been exploited for the synthesis of bile acid based first and second generation dendrons with multiple hydroxyl groups. The synthesis involves only a few steps and avoids the use of protecting groups for the terminal hydroxyl groups. These dendritic structures with facially amphiphilic bile acid backbones on the periphery were able to solubilize cresol red, a hydrophilic dye, in a nonpolar solvent. HPLC analysis of the dendrons suggests that hydrophobicity increases with increase in oligomer size, but in each generation, the dendrons with a higher degree of branching are less hydrophobic.     

Bicyclic 1,2,3-triazolium ionic liquids: synthesis, characterization, and application to rutaecarpine synthesis

Starting with commercial reagents, bicyclic 1,2,3-triazolium ionic liquids [b-3C-tr][NTf(2)] (1) and [b-4C-tr][NTf(2)] (2) were synthesized in four steps with high overall isolated yields of 68% and 76%, respectively. Since the C-5 hydrogen is acidic, under basic condition ionic liquids 1 and 2 were readily methylated with methyl iodide to afford chemically stable ionic liquids 7 and 8 at room temperature (88% and 82%, respectively). Ionic liquid 1 was used as the ionic solvent to demonstrate its usefulness for the synthesis of rutaecarpine, a natural product.     

Ethylene glycol monolayer protected nanoparticles: synthesis, characterization, and interactions with biological molecules

The usefulness of the hybrid materials of nanoparticles and biological molecules on many occasions depends on how well one can achieve a rational design based on specific binding and programmable assembly. Nonspecific binding between nanoparticles and biomolecules is one of the major barriers for achieving their utilities in a biological system. In this paper, we demonstrate a new approach to eliminate nonspecific interactions between nanoparticles and biological molecules by shielding the nanoparticle with a monolayer of ethylene glycol. A direct synthesis of di-, tri-, and tetra(ethylene glycol)-protected gold nanoparticles (Au-S-EGn, n = 2, 3, and 4) was achieved under the condition that the water content was optimized in the range of 9-18% in the reaction mixture. With controlled ratio of [HAuCl4]/[EGn-SH] at 2, the synthesized particles have an average diameter of 3.5 nm and a surface plasma resonance band around 510 nm. Their surface structures were confirmed by 1H NMR spectra. These gold nanoparticles are bonded with a uniform monolayer with defined lengths of 0.8, 1.2, and 1.6 nm for Au-S-EG2, Au-S-EG3, and Au-S-EG4, respectively. They have great stabilities in aqueous solutions with a high concentration of electrolytes as well as in organic solvents. Thermogravimetric analysis revealed that the ethylene glycol monolayer coating is ca. 14% of the total nanoparticle weight. Biological binding tests by using ion-exchange chromatography and gel electrophoresis demonstrated that these Au-S-EGn (n = 2, 3, or 4) nanoparticles are free of any nonspecific bindings with various proteins, DNA, and RNA. These types of nanoparticles provide a fundamental starting material for designing hybrid materials composed of metallic nanoparticles and biomolecules.     

Phenoxy-benzothiadiazole dyes: Synthesis,photophysical properties and preliminary application in OLEDs

The synthesis of a phenoxy-benzothiadiazole (BTD) derivative is reported for the first time. This derivative was employed as an intermediate in the obtention of two novel highly fluorescent aryl-phenoxy-BTD dyes. Their photophysical properties were evaluated in solution and the results indicate a strong intramolecular charge transfer (ICT) character in the excited state. The luminophore 3a, possessing a donor-BTD-phenoxide architecture, exhibits superior fluorescence quantum yield (0.67) than the designed acceptor-BTD-phenoxide dye (0.06). After electrochemical and photoluminescence characterization of thin films of 3a, an OLED with the configuration ITO/PEDOT:PSS/3a/TPBi/LiF/Al was constructed. This device displayed a green emission centered at 547?nm, with CIE coordinates of (0.40, 0.55). For comparison, an OLED using a previously reported luminescent BTD-pyridyl derivative was also constructed. The OLED made with the phenoxy-BTD derivative operated using less current density and led to higher irradiance and electrical stability, indicating the high potential of ArO-BTD dyes for future application in electroluminescent devices.     

Hyperbranched bisphosphinoamine ligands: synthesis,characterization and application in ethylene oligomerization

Two hyperbranched bisphosphinoamine (PNP) ligands and chromium complexes were synthesized in good yield with 1.0 generation (1.0 G) hyperbranched macromolecules, chlorodiphenylphosphine (Ph₂PCl) and CrCl₃(THF)₃ as raw materials. The hyperbranched PNP ligands and chromium complexes were characterized by FT-IR, ¹H NMR, ³¹P NMR, UV and ESI-MS. Comparing with the chromium complexes, the hyperbranched PNP ligands, in combination with Cr(III), and activation by methylaluminoxane (MAO) in situ generated species with better catalytic performance for ethylene oligomerization. The effect of solvent, chromium source, ligand/Cr molar ratio, reaction temperature, Al/Cr molar ratio and reaction pressure on the catalytic activity and product selectivity were studied. The results showed that with increase of ligand/Cr molar ratio, reaction temperature and Al/Cr molar ratio, the catalytic activity increased at first and then decreased. However, the catalytic activity continuously increased with increase of reaction pressure. Under the optimized conditions, the catalytic system of hyperbranched PNP/Cr(III)/MAO led to catalytic activity of 2.68 × 10⁵ g/(mol Cr·h) and 37.71% selectivity for C₆ and C₈.     

Silver nanofractals: electrochemical synthesis, XPS characterization and application in LDI-MS

Silver nanofractals (Ag-NFs) have been electrosynthesized and characterized by means of morphological and spectroscopic analytical techniques. In particular, X-ray photoelectron spectroscopy has been used to assess the nanomaterial surface chemical state. Ag-NFs show interesting perspectives in bioanalytical applications, particularly as non-conventional desorption and ionization promoters in laser desorption ionization mass spectrometry.     

Cagearenes: synthesis,characterization, and application for programmed vapour release

Here, we announce the establishment of a new family of organic molecular cages, named cagearenes, by taking advantage of a versatile strategy. These cagearenes were prepared via the Friedel–Crafts reaction by condensing two equivalents of a precursor bearing three 1,4-dimethoxybenzene groups and three equivalents of formaldehyde. Two cages, namely cagearene-1 and cagearene-2, are obtained and well characterized. The cagearene-1 solid exhibits the ability to adsorb benzene vapour from an equimolar benzene/cyclohexane mixture with a purity of 91.1%. Then, the adsorbed benzene molecules can be released from the cage at a relatively lower temperature, namely 70 °C, as a consequence of which, cyclohexane with a high purity was left within the cage solid. Heating the cage solid further at 130 °C led to the production of cyclohexane with a purity up to 98.7%. As inferred from the single crystal structures and theoretical calculations, the ability of the cage in programmed release of benzene and cyclohexane results from the different binding modes of these two guests.

Two organic cages, cagearene-1 and cagearene-2, are prepared. The cagearene-1 solid selectively absorbs benzene vapor from a benzene/cyclohexane mixture and is used to achieve temperature-controlled programmed vapor release.     

Functionalization of C,C-palladacycles: application in the synthesis of functional molecules

Significant advancements have been achieved in the field of C,C-palladacycles functionalization in recent decades, which have greatly contributed to the synthesis of intricate drug molecules, natural products, innovative materials, and chiral ligands.Additionally, these advancements have led to the establishment of highly efficient and atom-economic synthetic processes.Based on the differences in the C–Pd bonds, C,C-palladacycles can be further classified into several main types: C(aryl),C(alkyl...