Interrogation of single synthetic polymer chains and polysaccharides by AFM-based force spectroscopy.

This contribution reviews selected mechanical experiments on individual flexible macromolecules using single-molecule force spectroscopy (SMFS) based on atomic force microscopy. Focus is placed on the analysis of elasticity and conformational changes in single polymer chains upon variation of the external environment, as well as on conformational changes induced by the mechanical stress applied to individual macromolecular chains. Various experimental strategies regarding single-molecule manipulation and SMFS testing are discussed, as is theoretical analysis through single-chain elasticity models derived from statistical mechanics. Moreover, a complete record, reported to date, of the parameters obtained when applying the models to fit experimental results on synthetic polymers and polysaccharides is presented.     

Photochemically initiated single polymer immobilization

This Concept article surveys methods for attaching single polymer molecules on solid substrates. A general approach to single polymer immobilization based on the photochemistry of perfluorophenylazides is elaborated.     

When tethered chains meet free ones; the stability of polymer wetting films on polymer brushes

We present a combined experimental and theoretical self-consistent field (SCF) investigation of the wetting behavior of a polystyrene melt (composed of chains with degree of polymerization P) on top of a polystyrene brush (composed of chains with length N) grafted onto a silica surface. The control variables are the grafting density σ of the brush chains and the length of mobile chains P. Experiments show in agreement with the theory that there is a window of complete wetting. Both at very low and at high grafting densities the system remains partial wet. At large degree of polymerization P, there is a difference between the experimental and theoretical results. Theory predicts partial wetting only, whereas the window of complete wetting persists in the experiments even when P >> N. This difference is attributed to the double-well structure of the disjoining pressure as revealed by the SCF theory. With this type of disjoining pressure it is conceivable that a metastable zero contact angle remains present for very long times.     

Relaxation dynamics of stretched polymer chains traced by shear induced Shish‐Kebab structure

We have developed a morphologic method to investigate the relaxation processing of the stretched polymer chains in melts, in which an atomic force microscope probe was used to shear the surface of an isotactic polypropylene melt to obtain the isolated shish‐kebab structure. We present the results of the time dependence of length of the isolated shish‐kebab structure and the stress dependence of the kebab density along the direction of shish in this paper. Our results demonstrate that the shear‐oriented polymer melts show the relaxation dynamics of worm‐like chain where the length deficit of the isolated shish‐kebab structure is scaled with the relaxation time as a power of 1/3. The melting behavior of shish‐kebab structure was also investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 907–914     

Facile measurement of polymer film thickness ranging from nanometer to micrometer scale using atomic force microscopy

As many properties of polymer thin films critically depend on their thickness, a convenient and cost‐effective method for precise measurement of film thickness in a wide range is highly desirable. Here, we present a method which enables polymer film thickness, ranging from nanometer to micrometer scale, to be facilely determined by measuring the height of an artificially created film step on smooth substrates with atomic force microscopy (AFM). Three polymeric films (polystyrene, poly(methyl methacrylate) and poly(styrene–ethylene/butylene–styrene) films), spin‐coated on either mica or quartz substrate with thickness ranging from 5.7 nm to 4.4 µm, were employed to demonstrate the procedure and feasibility of our method. The proposed method is particularly suitable for thicker polymer films, thus complementing the traditional AFM ‘tip‐scratch’ method which is generally limited to polymer films of no more than 100 nm thickness. Copyright © 2010 John Wiley & Sons, Ltd.     

Correlating polymer structure,dynamics, and function with atomic force microscopy

Since its development, atomic force microscopy (AFM) has become an indispensable tool for investigating fundamental and technological applications of polymer materials. The versatility of AFM imaging modes and operating conditions allows for nanoscale characterization of a range of dynamic processes, such as crystallization, phase separation, self assembly, and electronic transport. Advances in AFM technology, particularly high-speed and high-resolution imaging, enable investigation of polymer structure, function, and dynamics in real world conditions and across a range of relevant spatial and temporal scales. In this perspective, we highlight a collection of recent polymer studies that utilize AFM to correlate the function and structure of polymer films, with focus on its multiparametric imaging capabilities. As the complexity of polymer materials and morphologies continues to increase, AFM is well poised to meet the accompanying demand for nanoscale imaging and characterization.     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

Characterization of chemical heterogeneity in polymer systems using hydrolysis and tapping‐mode atomic force microscopy

Characterization of polymer coatings microstructure is critical to the fundamental understanding of the corrosion of coated metals. An approach for mapping the chemical heterogeneity of a polymer system using chemical modification and tapping‐mode atomic force microscopy (TMAFM) is demonstrated. This approach is based on the selective degradation of one of the phases in a multiphase polymer blend system and the ability of TMAFM to provide nanoscale lateral information about the different phases in the polymer system. Films made of a 70:30 polyethyl acrylate/polystyrene (PEA/PS) blend were exposed to a hydrolytic acidic environment and analyzed using TMAFM. Pits were observed to form in the PEA/PS blend films, and this degradation behavior was similar to that of the PEA material. Using these results, the domains in the 70:30 blend were identified as the PS‐rich regions and the matrix as the PEA‐rich region. This conclusion was confirmed by Fourier transform infrared‐attenuated total reflection analyses that revealed the hydrolysis of the PEA material. TMAFM phase imaging was also used to follow pit growth of the blend as a function of exposure time. The usefulness of the chemical modification/AFM imaging approach in understanding the degradation process of a coating film is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1460–1470, 2001     

Correlative imaging for polymer science

The characterization of polymeric materials is key towards the understanding of structure–activity relations and therefore for the rational design of novel and improved materials for a myriad of applications. Many microscopy techniques are currently used, with electron microscopy, fluorescence microscopy, and atomic force microscopy being the most relevant. In this perspective paper, we discuss the use of correlative imaging, that is, the combination of multiple imaging methodologies on the same sample, in the field of polymeric materials. This innovative approach is emerging as a powerful tool to unveil the structure and functional properties of biological and synthetic structures. Here we discuss the possibilities of correlative imaging and highlight their potential to answer open questions in polymer science.     

Unravelling Secondary Structure Changes on Individual Anionic Polysaccharide Chains by Atomic Force Microscopy

The structural conformations of the anionic carrageenan polysaccharides in the presence of monovalent salt close to physiological conditions are studied by atomic force microscopy. Iota‐carrageenan undergoes a coil–helix transition at high ionic strength, whereas lambda‐carrageenan remains in the coiled state. Polymer statistical analysis reveals an increase in persistence length from 22.6±0.2 nm in the random coil, to 26.4±0.2 nm in the ordered helical conformation, indicating an increased rigidity of the helical iota‐carrageenan chains. The many decades‐long debated issue on whether the ordered state can exist as single or double helix, is conclusively resolved by demonstrating the existence of a unimeric helix formed intramolecularly by a single polymer chain.     

Nanostructure formation in polymer thin films influenced by humidity

The influence of relative humidity (RH) during the film preparation on the surface morphology and on the material distribution of the resulting technical polymer blend films consisting of poly (methyl methacrylate) (PMMA) and poly (vinyl butyral) (PVB) is investigated by atomic force microscopy. Both pure polymers and polymer blends with different compositions of PVB/PMMA dissolved in tetrahydrofuran (THF) were used. Polymer films prepared under dry conditions (RH < 20%) are compared with those that have the same polymer composition but were prepared under increased humidity conditions (RH > 80%). The films consisting of the pure polymers showed a nonporous surface morphology for low‐humidity preparation conditions, whereas high‐humidity preparation conditions lead to porous PVB and PMMA films, respectively. These pores are explained as the result of a breath figure formation. In the case of the polymer blend films containing both polymers, porous or phase‐separated surface structures were observed even at low‐humidity conditions. A superposition of the effects of phase separation and breath figure formation is observed in the case of polymer blend films prepared under high‐humidity conditions. Atomic force microscopy (AFM) images taken before and after the treatment with ethanol as a selective solvent for PVB indicate that PMMA is deposited on top of a PVB layer in the case of the low‐humidity preparation process whereas for high‐humidity conditions the silicon substrate is covered with a PMMA film. Copyright © 2006 John Wiley & Sons, Ltd.     

Orientation control of ferroelectric polymer molecules using contact-mode AFM

We have developed an orientation control technique for polymer molecules utilizing contact-mode atomic force microscopy (AFM). In this technique, the molecular chains were directly modified by scanning an AFM cantilever tip in contact with the film surface at the temperature just below its melting point. We call this process “modification scan”. Here, we applied this technique to poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) thin films on graphite and glass. We prepared a 75-nm thick copolymer crystalline film on graphite whose lamellar plane was perpendicular to the substrate (edge-on), and also prepared a film of the same thickness on glass whose lamellar plane was parallel to the substrate (flat-on). After applying this technique on both films, molecular chains were stretched and aligned to the modification scan direction, and new edge-on crystals were obtained, whose lamellar planes were well-aligned perpendicular to the modification scan direction.     

Physical characteristics of Saccharomyces cerevisiae

We examined the physical properties of the surrounding yeast cell walls by using atomic force microscopy (AFM). The yeast cells were prepared on a cleaned glass substrate for confocal microscopy (CM) observation and were mechanically trapped into a porous membrane for AFM measurement. The confocal image of the yeast cells was measured in air, meanwhile the AFM topography images of the cells were measured in both deionized (DI) water (pH = 6.9) and phosphate‐buffered saline (PBS) solution (pH = 7.4). No significant differences between the AFM topography images of the yeast cells measured in DI water and in PBS solution could be inferred. In order to get the quantitative information on the sample elasticity, the force curves between an AFM tip and the yeast cell have been measured. These curves were measured in both DI water and in PBS solution on the same yeast cell using the same AFM cantilever to get the reliable result. The contact region of the force curve in approach mode was then converted into force versus indentation curve, which would be fitted with Hertz–Sneddon model for the calculation of the elasticity. Analysis of the curves indicates that there is a difference of the Young's modulus values of the yeast cell in various environments. These data show that the salt buffer solution increases the rigidity of the biological system. Copyright © 2008 John Wiley & Sons, Ltd.     

基于原子力显微镜的高分子单分子力学研究

原子力显微镜(AFM)从根本上改变了人们对单个原子和分子的作用和认识方式。单分子力谱是基于原子力显微镜力的测量方法。概速了近年来利用基于原子力显微镜的单分子力谱研究单个高分子分子内及分子闻作用力的进展。     

AFM单分子力谱在真实材料及生物体系中的应用——挑战与机遇并存

基于原子力显微镜技术（AFM）的单分子力谱是研究分子间分子内相互作用的有效手段．为了简化样品体系及数据的解析,真实的生物或材料体系通常被简化,其中的目标分子被提取并桥连于AFM的针尖与固体基片之间进行研究,这是认识真实体系的有效途径．随着技术的不断进步（包括样品固定方法的改进）,使得直接研究真实生物及材料体系中的各种弱相互作用成为可能,此种条件下获得的信息对相关生命过程的调控及高性能材料的设计更具指导意义．本文概述了近几年基于AFM力谱技术在活体细胞以及高分子材料领域的研究进展,分析了存在的主要问题,并对相关领域的未来进行了展望．     

Noncovalent functionalization and solubilization of carbon nanotubes by using a conjugated Zn-porphyrin polymer

A highly soluble, conjugated Zn-porphyrin polymer was synthesized and found to strongly interact with the surface of single-walled carbon nanotubes, producing a soluble polymer-nanotube complex. Successful complexation required the addition of trifluoroacetic acid to the solvent (THF). It was found that the complex remained soluble after excess free polymer was removed from solution, and could be centrifuged at high speed with no observable sedimentation. Furthermore, the polymer-nanotube assembly resulted in enhanced planarization and conjugation within the porphyrin polymer, which was manifested in a 127 nm bathochromic shift of the Q-band absorption. Control experiments with the Zn-porphyrin monomer indicated that homogeneous solutions could be prepared by means of sonication, but the monomer-nanotube interactions were significantly weaker, leading to nanotube precipitation within minutes. Atomic force microscopy (AFM) studies indicated that the polymer enables exfoliation of nanotube bundles and is able to "stitch" multiple nanotubes together into a series of long, interconnected strands.     

Preparation and characterization of nanometer‐thin freestanding polymer foils for laser‐ion acceleration

We report on the production and characterization of polymer‐based ultra‐thin (sub 10 nm) foils suited for experiments on laser‐ion acceleration in the regime of radiation pressure acceleration. Beside the remarkable mechanical stability compared with commonly used diamond‐like‐carbon foils, a very homogeneous layer thickness and a small surface roughness have been achieved. We describe the technical issues of the production process as well as detailed studies of the mechanical stability and surface roughness tests. The capability of producing uniform targets of large area is essential for advanced laser‐ion acceleration projects which are dealing with high repetition rate and extended measurement series, but might also be useful for other applications which require ultra‐thin and freestanding substrates of high quality. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1355–1360     

Improved phase separation in polymer solar cells by solvent blending

The effect of solvent blending on the performance of an anthracene‐containing poly(p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) backbone‐based donor polymer with asymmetrically substituted branched 2‐ethylhexyloxy and methyloxy side‐chains in bulk heterojunction solar cells is reported. This copolymer yields relatively high open‐circuit voltages with fullerene‐based electron acceptors. We systematically studied the thin‐film blend morphology and solar cell performance as a function of solvent composition (chlorobenzene to chloroform ratio) and polymer to [6,6]‐phenyl C61‐butyric acid methylester (PCBM) ratio. We combined photophysical investigations with atomic force microscopy and grazing incidence wide‐angle X‐ray scattering to elucidate the solid‐state morphology in thin films. In the investigated polymer system, the blend morphology becomes independent of the supporting solvent for high PCBM concentrations. Deposition from solvent blends rather than from pure chlorobenzene facilitates the beneficial phase separation between polymer and PCBM, leading to improved charge transport properties (short‐circuit currents) at lower PCBM concentrations. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013, 51, 868–874