供体-受体型共轭聚合物电子结构和导电性能的理论设计

以苯并[1,2-c:4,5-c']二[1,2,5]噻重氮和吡嗪并[2,3-g]喹喔啉为电子受体(A),噻吩、噻吩并[3,2-b]噻吩和二噻吩并[2,3-b:2',3'-d]噻吩为电子供体(D),设计了6种D-A型共轭聚合物.采用B3LYP方法,研究了这6种聚合物的几何结构和电子性质.D-A型共轭聚合物的几何结构和电子结构与电子供体和电子受体的性质,特别是与其提供电子和接受电子的能力密切相关.聚合物的能隙主要受键长交替控制,键长交替越小,能隙越窄.所设计的6种聚合物中,p-BBT-TT具有较窄的能隙(0.48 eV)、较小的载流子有效质量和相对较大的能带宽度,具备理论上的良好导电性能,可能是潜在的优良导电聚合物材料.     

Luminescence properties of PPV derivatives bearing substituted carbazole pendants

A series of PPV derivatives bearing substituted and unsubstituted carbazole and 2-ethylhexyloxy pendants were prepared and their photo- (PL) and electroluminescence (EL) properties were studied. Substituted carbazole structures were N-phenylcarbazole and 3,6-dimethoxycarbazole. The substituents on the carbazole pendants caused little change in UV-vis absorption, PL, and EL when compared with the polymer bearing the unsubstituted carbazole pendants. The presence of the benzene ring between the main chain and the carbazole pendant increased the threshold electric field in EL. We could obtain maximum brightness of ca. 17,000 - 30,000 cd/m² for the polymers carrying the unsubstituted and dimethoxy substituted carbazole pendants.     

Properties of polythiophene and related conjugated polymers: a density-functional study

Using a parameter-free, density-functional method that has been developed explicitly for the theoretical treatment of infinite, periodic, isolated, helical polymers we study various polymers related to polythiophene. In particular we discuss how the electronic properties of polythiophene are changed when replacing some of the H atoms by CH3 group, by incorporating vinylene bridges into the backbone, or when replacing some or all the CH units of the backbone by N atoms. We observe the weakest effects for the methyl-substitution and the strongest for the N-incorporation. The latter leads to an overall downward shift of all bands, but in contrast to the case for polyacetylene, the unrelaxed compound with N atoms does not have N lone-pair orbitals as the highest occupied ones. Instead these occur at somewhat deeper energies. When comparing the aromatic and quinoid forms we found for the pure compound as well as for the methyl-containing one that the gap closes when passing from the one to the other form which was not found for any of the other materials of the present study. Moreover, the energy of the HOMO was found to depend stronger on the bond-length alternation than the energy of the LUMO, ultimately giving that polarons will induce two asymmetrically placed gap states with the energetically lower one appearing deeper in the gap than the other one.     

给/吸电子基团取代对PPV类电致发光聚合物光电特性的影响

用量子化学的AM1和EHMACC/CO方法计算PPV,MEH-PPV和CN-PPV的电子和能带结构,讨论了烷氧基(-OR)和氰基(-CN)侧基取代对PPV类电致发光聚合物光电特性的影响.计算结果表明:给电子基团(-OR)取代使聚合物的HOCO(最高占据晶体轨道)能级升高,电离势减小,而吸电子基团(-CN)取代使LUCO(最低未占据晶体轨道)能级降低,电子亲和势增大,两者都使聚合物能隙降低,同时使聚合物的导电类型由PPV的p型转变成CN-PPV的n和p兼容型.该结果解释了MEH-PPV和CN-PPV光谱的红移及CN-PPV高的电致发光效率,为设计新型高效的PPV类电致发光聚合物提供了理论基础.     

Characterization of the oxidation products of styryl-substituted terthiophenes and sexithiophenes using electronic absorption spectroscopy and time-dependent DFT

The electronic absorption spectra of a series of alkoxy-styryl substituted terthiophenes, their corresponding sexithiophenes, and the oxidation products of both have been measured. The terthiophenes studied sigma-dimerize to sexithiophenes during the oxidation process and there is clear evidence of sexithiophene radical cations, dications, and pi-dimers in the electronic absorption spectra. The oxidation of concentrated solutions produces predominantly pi-dimer bands, as expected. The absorption spectrum of the styryl-functionalized sexithiophene dication without alkoxy substitution closely resembles that of unsubstituted sexithiophene, while alkoxy substitution induces changes in the wavelength of the dication band maximum and the overall band shape. Time-dependent density functional theory (TDDFT) calculations have shown that styryl-based molecular orbitals are important in the transitions of the neutral molecules as well as the charged species, the dication in particular. Kinetics analyses confirm the stabilization effect induced by the alkoxy substituents. The presence of a reversible pi-dimer equilibrium was verified by cyclic voltammetry. It is clear from the experimental observations and the theoretical calculations that both the styryl and alkoxy groups are influencing the electronic properties of this class of molecules.     

The study of molecular motions in substituted ferrocenes by means of NMR spectroscopy

The proton magnetic resonance spectra for ferrocene derivatives have been investigated in the solid state at a frequency of 27.5 MHz and at temperatures within the range 4.2–300 K. Evidence for re-orientation in various substituent groups and cyclopentadienyl rings has been deduced on the basis of the temperature dependence of the second moment of the PMR lines. The experimentally observed decrease in the second moment has been compared with the calculated contributions of different molecular groups to the second moment thus enabling an identification of these groups. In computing the second moment, account has been taken of both intra- and intermolecular dipole-dipole interactions. It is shown that the introduction of substituents into some ferrocene rings affects the magnitude of the re-orientation energy for both the substituted and unsubstituted rings. The change of the re-orientation energy of the substituted and unsubstituted rings in substituted ferrocenes with the structure and electronic properties of the substituents is discussed.     

Tuning of electronic properties in thienyl-phosphole pi-conjugated systems through P-functionalization monitored by Raman spectroscopy

Herein, a Raman spectroscopic study of a new family of 2,5-di(2-thienyl)phospholes and thienyl-capped 1,1'-diphospholes is presented. The Raman spectra have been carefully assigned with the help of density functional calculations. For di(2-thienyl)phospholes, two well-differentiated groups of Raman bands exist that arise either from the central phosphole ring or from the outer thiophene substituents. These data reveal a segmentation of the electronic structure. This paper reports interesting relationships between geometrical data such as the BLA (bond-length alternation) parameter and Raman band wavenumbers. These correlations are unprecedented in the chemistry of phospholes and have been used to interpret the evolution of the electronic structure (aromaticity=pi-conjugation) upon 1) substitution of the central sulfur atom of terthiophene by phosphorus and 2) P-functionalization. Increasing the coordination number of the phosphole ring results in intramolecular charge transfer. The best scenario for phosphole aromaticity is found for 1,1'-diphospholes.     

含二唑的聚(间亚苯乙烯)电致发光二极管

含二唑的聚（间亚苯乙烯）电致发光二极管印寿根李晨曦黄文强何炳林（南开大学吸附分离功能高分子材料国家重点实验室高分子化学研究所天津３０００７１）彭俊彪刘星元李文连（中国科学院长春物理研究所长春１３００２１）关键词电致发光，光电子能谱，聚（间亚苯...     

Small band gap conjugated polymers based on thiophene–thienopyrazine copolymers

In this study, five small band gap thiophene ( TH )–thienopyrazine ( TP ) conjugated copolymers were synthesized by Stille‐coupling reaction. The polymer structures consisted of one to four thiophene rings with the TP of different side groups provided a systematical investigation on the structure–electronic property relationship. The absorption maxima of the polymer films decreased from 850 to 590 nm as the thiophene moieties increased from thiophene to quaterthiophene. The optical and electrochemical band gaps of the studied poly[2,3‐didodecyl‐5‐(thiophen‐2‐yl)thieno[3,4‐b]pyrazine] ( PTHTP‐C12 ) were 0.97 and 0.78 eV, respectively, indicating a significant intramolecular charge transfer. The theoretical geometry and electronic properties of the TH ‐ TP copolymers by the density functional theory at the B3LYP level and 6‐31G(d) basis set suggested that the bond length alternation enlarged with enhancing the thiophene content and resulted in the variation on the polymer band gap. The relatively small theoretical effective mass of poly( TH ‐alt‐ TP ) also indicated its potential applications for field transistor applications. Our study demonstrates the tunable electronic properties of small band gap copolymers by the thiophene content and the resulted geometry variation. Such polymers could be potentially used for near‐infrared electronic and optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5872–5883, 2007     

Electronic Properties of Vinylene-Linked Heterocyclic Conducting Polymers: Predictive Design and Rational Guidance from DFT Calculations

The band structure and electronic properties in a series of vinylene-linked heterocyclic conducting polymers are investigated using density functional theory (DFT). In order to accurately calculate electronic band gaps, we utilize hybrid functionals with fully periodic boundary conditions to understand the effect of chemical functionalization on the electronic structure of these materials. The use of predictive first-principles calculations coupled with simple chemical arguments highlights the critical role that aromaticity plays in obtaining a low band gap polymer. Contrary to some approaches which erroneously attempt to lower the band gap by increasing the aromaticity of the polymer backbone, we show that being aromatic (or quinoidal) in itself does not ensure a low band gap. Rather, an iterative approach which destabilizes the ground state of the parent polymer toward the aromatic ? quinoidal level crossing on the potential energy surface is a more effective way of lowering the band gap in these conjugated systems. Our results highlight the use of predictive calculations guided by rational chemical intuition for designing low band gap polymers in photovoltaic materials.     

Computational atomistic blueprinting of novel conducting copolymers using particle swarm optimization

A proficient metaheuristic approach viz., particle swarm optimization coupled with negative factor counting technique and inverse iteration method has been employed for designing novel binary and ternary copolymers based on thiophene, pyrrole and furan skeletons. A comparative study of the electronic structures and conduction properties of neutral heterocyclic copolymers and their benzene substituted analogues is inferred using the band structure results derived from ab-initio Hartree–Fock crystal orbital calculations. The band gap value decreases as a result of substitution on the polymer backbone due to increased quinoid contributions which is expected to enhance the intrinsic conductivity of the resulting copolymers. In general, it has been found that HOMO energies have a more decisive influence than LUMO energies on the relative fraction of constituents of the respective low band gap copolymers. The trends in the electronic properties of the respective copolymers are also verified and discussed with the help of density of states. These results can help streamline scrupulous synthetic efforts providing a potent route for molecular engineering of sustainable and efficient electronic materials.     

环状聚茚并茚及其取代衍生物电子结构和磁性研究

采用半经验的AM1法，对环状聚茚并茚及其取代物的电子结构进行了计算研究 ，探讨了其磁性和取代基效应．计算得到，环状聚茚并茚及其取代物皆表现半导体 性质且发现其中一种异构体可能具有磁性．取代基效应表明，吸电子基团的取代使 聚合物的电子亲合势增大，而给电子基团的取代则导致电离势减少，但取代基效应 不能改变聚合物的半导体性质．此外，无论吸电子基团还是给电子基团的取代都不 能改变聚合物的磁性特征．     

DFT study on the structural and electronic properties of Pt-doped boron nitride nanotubes

First-principles calculations based on density functional theory were carried out to investigate the structural and electronic properties of Pt substitution-doped boron nitride (BN) nanotubes. The electronic and structural properties were studied for substituted Pt in the boron and the nitrogen sites of the (BN) nanotube. The band gap significantly diminishes to 2.095 eV for Pt doping at the B site while the band gap diminishes to 2.231 eV for Pt doping at the N site. The band density increases in both the valence band and the conduction band after doping. The effects of the hardness and softness group 17 (halogen elements) were calculated by density functional theory (DFT).     

Control of the conjugation length and solubility in electroluminescent polymers

A new type of cyclolinear polymer, poly(phenylene vinylene‐alt‐cyclotriphosphazene), was synthesized through Heck‐type coupling reactions to produce π‐conjugated macromolecules with excellent solubility and precise electronic control of the band‐gap energy. This synthesis method is capable of producing well‐defined alternating polymers. The method is highly adaptable and can be readily used for other chromophore systems. The resulting polymers were also capable of accommodating a wide variety of substituents on the cyclophosphazene rings with minimal effect on the electronic properties. The band gap and electron affinities of the polymer were varied through the manipulation of the π‐conjugated unit located between the insulating phosphazene rings. Each chromophore matched the intended conjugation length consistently throughout the macromolecules. The polymers were good film formers because of the chosen substituents on the phosphazene rings. The absorbance of the polymers indicated minimal spectral shift from the monomer absorbance. This suggested an effective insulation of each chromophore unit from its neighbors by the phosphazene rings. Solution photoluminescence efficiencies were found to be up to 44.1%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 69–76, 2006     

Trinuclear Non‐Heme Iron Complexes Based on 4‐Substituted 2,6‐Diacylpyridine Ligands as Catalysts in Aerobic Allylic Oxidations

Taking the regio‐ and chemoselectivities of our iron complex precursors with pyridine core in aerobic oxidations into account, we envisioned a more effective influence on catalytic properties by the introduction of different substituents in 4‐position of the pyridine moiety. The synthesis of these novel 4‐substituted (pyridine‐2,6‐diyl)dipropanoic acids 4 is described. Analogously to the unsubstituted derivative, ligands 4 reacted with Fe(ClO₄)₃ to form trinuclear Fe₃(μ₃‐O) complexes 3 , which were tested in the aerobic Gif‐type oxidation of α‐pinene to myrtenol, verbenone, myrtenal, and pinene oxide. The electronic nature of the substituents was found to slightly effect the ratio of allylic oxidation/epoxidation, whereas its influence on the oxidation preference of secondary to primary C? H bonds is negligible as compared to the unsubstituted complex.     

A first principle study of pristine and BN-doped graphyne family

Based on first principle calculation using generalized gradient approximation, we report electronic properties of graphyne and its related structures (graphdiyne, graphyne-3, graphyne-4). Boron and nitrogen atoms are systematically substituted into the position of carbon atom and the corresponding changes of the properties are reported. All the structures are found to be direct band gap semiconductors with band gap depending on the concentration and position of the doping material. Our band structure calculation clearly shows that the band gap can be tuned by B–N doping and the spin-polarized calculation depicts the nonmagnetic nature of these structures. The possibility of modulating the band gap provides flexibility for its use in nanoelectronic devices. Projected density of state (PDOS) analysis shed insights on the bonding nature of these novel materials, whereas from the view point of Crystal Orbital Hamilton Population (–COHP) analysis, the nature of chemical bonding between neighbouring atoms and the orbital participating in bonding and antibonding have been explored in details.     

Synthesis of para- or ortho-substituted triarylbilindiones and tetraarylbiladienones by coupled oxidation of tetraarylporphyrins

Coupled oxidation of [tetraarylporphyrinato]iron(III) chloride carrying substituents in the ortho or para positions was performed by allowing the iron porphyrin to react with dioxygen, ascorbic acid, and pyridine to give biladienone as the major product and bilindione as a minor one. Efforts to find reaction conditions and workup procedures to obtain bilindione improved the yields of triarylbilindiones ranging between 2% and 19%. Electron-withdrawing substituents in the para position on the aryl groups increased the selectivity of bilindione relative to biladienone: the isolated yields of bilindione and biladienone were 2% and 85% (OMe), 6% and 44% (COOMe), and 7% and 28% (CN), respectively. Electronic effects of substituents affected both isolation procedures and the spectroscopic properties of bilindiones. Tri(4-methoxyphenyl)bilindione showed a red-shifted electronic absorption compared to unsubstituted and 4-methoxycarbonyl substituted analogues. This was ascribed to the destabilization of the HOMO-1 level by the methoxy groups.     

An efficient synthetic route to biologically relevant 2-phenylbenzothiazoles substituted on the benzothiazole ring

Certain 2-phenylbenzothiazoles containing substituents on the benzothiazole ring possess important biological properties, yet the majority of synthetic methods to 2-phenylbenzothiazoles described to date focus on their unsubstituted ring counterparts. Here we describe a new concise and efficient synthetic route to biologically relevant 2-phenylbenzothiazoles in high yield from the reaction of substituted 2-aminothiophenol disulfides and benzaldehydes, promoted by the inexpensive and non-toxic inorganic oxidant sodium metabisulfite in DMSO at 120 °C. Our new method is tolerant of a range of substituents on both the benzothiazole and phenyl ring, and affords efficient access to substituted 2-phenylbenzothiazoles without the need for column chromatography.     

Influence of silicon atoms on the π-conjugation in electroluminescent polymers

By means of the valence effective Hamiltonian (VEH) method, we calculated the electronic structure for a polymer containing poly(para-phenylene vinylene) (PPV) and dimethoxy-poly(para-phenylene) (PPP) units as well as silicon atoms used as spacers. The equilibrium geometry was obtained by an AM1 calculation. We obtained a band gap of 3.2 eV, which corresponds to emittance in the blue part of the spectrum. This polymer is used as the active layer in light-emitting diodes. © 1997 John Wiley & Sons, Inc.     

聚噻吩取代效应的理论研究

用自洽场晶体轨道法（ＳＣＦ ＣＮＤＯ／２－ＣＯ）对聚噻吩的一些一取代物和二取代物的电子结构进行了研究，计算的取代基包括－ＣＨ３，－Ｃ２Ｈ５，－ＯＣＨ３和－ＣＮ。计算结果表明，这些取代基基本没有影响聚噻吩主链的平面结构，除聚－３，４－二甲基噻吩的主链发生了４０°的扭转外，其它衍生物的主链仍处于同一平面。根据各取代高分子的电子特性我们得到结论：给电子基团和吸电子基团的取代教师将使能隙（Ｅｇ）减小，价带