Work of Formation of Grain Boundaries upon Metal Plastic Deformation

The mechanical treatment of a number of powder metals (Al, Ni, Fe, Cu, Ag, and W) was investigated. It was shown that the work of formation of grain boundaries A _S is of the order of several hundreds J/m². Using iron powder as an example, it was established that A _S values are constant at energy doses up to 5–10 kJ/g (the surface area of grain boundaries does not exceed 20 m²/g) and independent on the energy intensity of a device (from 10^–1 to 10 W/g). As a rule, the addition of other powder metals (no more than 40 at. %) to iron powder leads to an increase in the A _S value.     

Conformational analysis and vibrational spectroscopic investigation of 3-phenylpropylamine

The possible stable forms of 3-phenylpropylamine (3-PPA) molecule were experimentally and theoretically studied by infrared and Raman spectroscopy. FT-IR and Raman spectra of 3-PPA were recorded in the regions of 4000–400 cm⁻¹ and 3700–60 cm⁻¹, respectively. The potential energy surface corresponding to the internal rotations of the molecule was investigated by semi-empirical quantum mechanical methods, and appropriate conformers defined with B3LYP hybrid density functional theory method along with the basis sets of different size and type. Results from experimental and theoretical data showed the trans–trans–gauche (TTG) to be the most stable form of a 3-PPA molecule.     

Electrochemical behavior of a covalently modified glassy carbon electrode with aspartic acid and its use for voltammetric differentiation of dopamine and ascorbic acid

Aspartic acid was covalently grafted on to a glassy carbon electrode (GCE) by amine cation radical formation in the electrooxidation of the amino-containing compound. X-ray photoelectron spectroscopic (XPS) measurement and cyclic voltammetric experiments proved the aspartic acid was immobilized as a monolayer on the GCE. Electron transfer to Fe(CN)₆^4– in solution of different pH was studied by cyclic voltammetry. Changes in solution pH resulted in the variation of the charge state of the terminal group; surface pK_a values were estimated on the basis of these results. Because of electrostatic interactions between the negatively charged groups on the electrode surface and dopamine (DA) and ascorbic acid (AA), the modified electrode was used for electrochemical differentiation between DA and AA. The peak current for DA at the modified electrode was greatly enhanced and that for AA was significantly reduced, which enabled determination of DA in the presence of AA. The differential pulse voltammetric (DPV) peak current was linearly dependent on DA concentration over the range 1.8×10^–6–4.6×10^–4 mol L^–1 with slope (nA mol^–1 L) and intercept (nA) of 47.6 and 49.2, respectively. The detection limit (3) was 1.2×10^–6 mol L^–1. The high selectivity and sensitivity for dopamine was attributed to charge discrimination and analyte accumulation. The modified electrode has been used for determination of DA in samples, in the presence of AA, with satisfactory results.     

Effect of Ion Energy on Structure and Composition of Cathodic Arc Deposited Alumina Thin Films

The effect of energy supplied to the growing alumina film on the composition and structure has been investigated by varying substrate temperature and substrate bias potential. The constitution and composition were studied by X-ray diffraction and elastic recoil detection analysis, respectively. Increasing the substrate bias potential from −50 to −100 V caused the amorphous or weakly crystalline films to evolve into stoichiometric, crystalline films with a mixture of the α- and γ-phase above 700 ^oC, and γ-phase dominated films at temperatures as low as 200 ^oC. All films had a grain size of <10 nm. The combined constitution and grain size data is consistent with previous work stating that γ-alumina is thermodynamically stable at grain sizes <12 nm [McHale et al., Science 277, 788 (1997)]. In order to correlate phase formation with synthesis conditions, the plasma chemistry and ion energy distributions were measured at synthesis conditions. These results indicate that for a substrate bias potential of −50 V, ion energies in excess of 100 eV are attained, both from a high energy tail and the accelerated ions with charge >1. These results are of importance for an increased understanding of the evolution of film composition and microstructure, also providing a pathway to γ-alumina growth at temperatures as low as 200 ^o C.     

Chemical bond breaking/forming as a Franck–Condon electronic process

We describe chemical bond changes as Franck–Condon electronic processes within a new theoretical ansatz that we call ‘rigged’ Born–Oppenheimer (R-BO) approach. The notion of the separability of nuclear and electron states implied in the standard Born–Oppenheimer (BO) scheme is retained. However, in the present scheme the electronic wave functions do not depend upon the nuclear coordinate (R-space). The new functions are obtained from an auxiliary Hamiltonian corresponding to the electronic system (r-coordinates) submitted to a Coulomb potential generated by external sources of charges in real space (α-coordinates) instead of massive nuclear objects. A stationary arrangement characterized by the coordinates α_0A, is determined by a particular electronic wave function, ψ(r;α_0A); it is only at this stationary point, where an electronic Schrödinger equation: H_e(r,α_0A)|Ψ(r;α_0A)=E(α_0A)|Ψ(r;α_0A) must hold. This equation permits us to use modern electronic methods based upon analytic first and second derivatives to construct model electronic wave functions and stationary geometry for external sources. If the set of wave functions {Ψ(r;α_0A)} is made orthogonal, the energy functional in α-space, E(α;α_0A)=Ψ(r;α_0A)|H_e(r,α_0A)|Ψ(r;α_0A) is isomorphic to a potential energy function in R-space: E(R;α_0A)=Ψ(r;α_0A)|H_e(r,R)|Ψ(r;α_0A). This functional defines, by hypothesis, a trapping convex potential in R-space and the nuclear quantum states are determined by a particular Schrödinger equation. The total wave function for the chemical species A reads as a product of our electronic wave function with the nuclear wave function (Ξ_ik(R;α_0A)): Φ_ik(r,R)=Ψ_i(r,α_0A)Ξ_ik(R;α_0A). This approach facilitates the introduction of molecular frame without restrictions in the R-space. Two molecules (characterized with different electronic spectra) that are decomposable into the same number of particles (isomers) have the same Coulomb Hamiltonian and they are then characterized by different electronic wave functions for which no R-coordinate ‘deformation’ can possibly change its electronic structure. A bond breaking/forming process must be formally described as a spectroscopic-like electronic process. The theory provides an alternative to the adiabatic as well as the diabatic scheme for understanding molecular processes. As an illustration of the present ideas, the reaction of H₂+CO leading to formaldehyde is examined in some detail.     

Staphylococcus epidermidis adhesion to He, He/O(2) plasma treated PET films and aged materials: contributions of surface free energy and shear rate

Adhesion studies of bacteria (Staphylococcus epidermidis) to plasma modified PET films were conducted in order to determine the role of the surface free energy under static and dynamic conditions. In particular, we investigated the effect of the ageing time on the physicochemical surface properties of helium (He) and 20% of oxygen in helium (He/O₂) plasma treated polyethylene terephthalate (PET) as well as on the bacterial adhesion. Treatment conditions especially known to result in ageing sensitive hydrophilicity (hydrophobic recovery) were intentionally chosen in an effort to obtain the widest possible range of surface energy specimens and also to avoid strong changes in the morphological properties of the surface. Both plasma treatments are shown to significantly reduce bacterial adhesion in comparison to the untreated PET. However, the ageing effect and the subsequent decrease in the surface free energy of the substratum surfaces with time – especially in the case of He treated samples – seem to favor bacterial adhesion and aggregation. The dispersion-polar and the Lifshitz–van der Waals (LW) acid–base (AB) thermodynamic approaches were applied to calculate the Gibbs free energy changes of adhesion (ΔG_adh) of S. epidermidis interacting with the substrates. There was a strong correlation between the thermodynamic predictions and the measured values of bacterial adhesion, when adhesion was performed under static conditions. By decoupling the (ΔG_adh) values into their components, we observed that polar/acid–base interactions dominated the interactions of bacteria with the substrates in aqueous media. However, under flow conditions, the increase in the shear rate restricted the predictability of the thermodynamic models.     

Electrodeposition of Lu on W and Al electrodes: Electrochemical formation of Lu–Al alloys and oxoacidity reactions of Lu(III) in the eutectic LiCl–KCl

The electrodeposition of lutetium on inert electrodes and the formation of lutetium–aluminium alloys were investigated in the eutectic LiCl–KCl in the temperature range 673–823 K. On a tungsten electrode, the electroreduction of Lu(III) proceeds in a single step and electrocrystalization plays an important role. Experimental current–time transients are in good agreement with theoretical models based on either instantaneous or progressive nucleation with three dimensional growth of the nuclei, depending on the working temperature. The diffusion coefficient of Lu(III) was determined by chronopotentiometry by applying the Sand equation. The activation energy for diffusion was found to be 31.5 ± 1.3 kJ mol⁻¹. Al₃Lu and mixtures of Al₃Lu and Al₂Lu, characterized by XRD analysis and SEM, were obtained from the LiCl–KCl melt containing Lu(III) by potentiostatic electrolysis using an Al electrode. The activity of Lu and the standard Gibbs energies of formation for Al₃Lu were estimated from open-circuit chronopotentiometric measurements. The E–pO²⁻(potential–oxoacidity) diagram for Lu–O stable compounds in LiCl–KCl at 723 K has been constructed by combining theoretical and experimental data. In this way, the apparent standard potential for the Lu(III)/Lu system has been determined by potentiometry. Potentiometric titrations of Lu(III) solutions with oxide donors, using a yttria stabilized zirconia membrane electrode “YSZME” as a pO²⁻ indicator electrode, have shown the stability of LuOCl and Lu₂O₃ in the melt and their solubility products have been determined at 723 K.     

The wettability of polytetrafluoroethylene by aqueous solution of cetylpyridinium bromide and propanol mixtures

Measurements of advancing contact angles (θ) were carried out for aqueous solutions of cetylpyridinium bromide (CPBr) and propanol mixtures at constant CPBr concentration equal to 1 × 10⁻⁵, 1 × 10⁻⁴, 6 × 10⁻⁴, 1 × 10⁻³ M, respectively, on polytetrafluoroethylene (PTFE). The obtained results indicate that the wettability of PTFE by aqueous solutions of these mixtures depends on their composition and concentration. In contrast to Zisman, there is no linear dependence between the cos θ and surface tension of aqueous solutions of CPBr and propanol mixtures (γ_LV), but a linear relationship exists between the adhesion tension and the surface tension of aqueous solutions of CPBr and propanol mixtures which have a slope equal to −1, and between cos θ and the reciprocal of the surface tension of solution. The slope equal to −1 and the intercept on the cos θ axis close to −1 suggest that adsorption of CPBr and propanol mixtures and the orientation of their molecules at aqueous solution–air and PTFE–aqueous solution interfaces are the same. This also suggests that the work of solution adhesion to the PTFE surface does not depend on the concentration of propanol and CPBr. Extrapolation of the straight line to the point corresponding to the surface tension of solution, which completely spreads over the PTFE surface, gives the value of the critical surface tension of PTFE wetting equal to 24.84 mN/m. This value is higher than PTFE surface tension (20.24 mN/m) and the values of the critical surface tension of PTFE wetting determined by other investigators from the contact angle of nonpolar liquids (e.g. n-alkanes). The differences between the value of the critical surface tension obtained here and those which can be found in the literature were discussed on the basis of the simple thermodynamic rules. Using the measured values of the contact angles and Young equation the PTFE–aqueous solution interfacial tension was determined. The values of PTFE–aqueous solution interfacial tension were also calculated from Miller and co-workers equation in which the correction coefficient of nonideality of the surface monolayer was introduced. From comparison of the obtained values it appears that good agreement exists between the values of PTFE–solution interfacial tension calculated on the basis of Young and Miller and co-workers equations in the whole range of propanol concentration.     

Conformational dependence of the intrinsic acidity of the aspartic acid residue sidechain in N-acetyl- -aspartic acid-N′-methylamide

The sidechain conformational potential energy hypersurfaces (PEHS) for the γ_L, β_L, α_L, and α_D backbone conformations of N-acetyl- -aspartate-N′-methylamide were generated. Of the 81 possible conformers initially expected for the aspartate residue, only seven were found after geometric optimizations at the B3LYP/6-31G(d) level of theory. No stable conformers could be located in the δ_L, _L, γ_D, δ_D, and _D backbone conformations. The ‘adiabatic’ deprotonation energies for the endo and exo forms of N-acetyl- -aspartic acid-N′-methylamide were calculated by comparing their optimized relative energies against those found for the seven stable conformers of N-acetyl- -aspartate-N′-methylamide. Sidechain conformational PEHSs were also generated for the estimation of ‘vertical’ deprotonation energies for both endo and exo forms of N-acetyl- -aspartic acid-N′-methylamide. All backbone–sidechain (N–H⁻O–C) and backbone–backbone (N–HO=C) hydrogen bond interactions were analyzed. A total of two backbone–backbone and four backbone–sidechain interactions were found for N-acetyl- -aspartate-N′-methylamide. The deprotonated sidechain of N-acetyl- -aspartate-N′-methylamide may allow the aspartyl residue to form strong hydrogen bond interactions (since it is negatively charged) which may be significant in such processes as protein–ligand recognition and ligand binding. As a primary example, the molecular geometry of the aspartyl residue may be important in peptide folding, such as that in the RGD tripeptide.     

Unimolecular rearrangement of α-silylcarbenium ions. An ab initio study

The unimolecular rearrangements of hydrogen, methyl and phenyl groups at the Si atom in α-silylcarbenium ions have been investigated using an ab initio molecular orbital method. MP2/6–31 + G^*//HF/6–31G^* calculations predict that all three groups migrate from the Si to an adjacent C_α with no energy barrier. Thus, the silicenium ion is the only stable species in each potential energy surface. The conformation of the benzylsilicenium ion, (C₆H₅)CH₂−SiH₂⁺, indicates that the phenyl ring is significantly bent toward the silyl cationic center in order to interact with the vacant 3p(Si⁺) orbital. In contrast to MP2 results, Hartree-Fuck calculations (both HF/3–21G^* and HF/6–31G^* levels) predict small energy barriers for 1,2-migrations of H and Me (1.4 kcal mol⁻¹ for H migration, and 1.5 kcal mol⁻¹ for Me migration, respectively, at the HF/6–31G^* level). This difference provides convincing evidence that the incorporation of electron correlation is of particular importance in describing the potential energy surface for the rearrangement of α-silylcarbenium ions to silicenium ions. The results of the calculations have also been applied to the possible rearrangement mechanism of α-chlorosilanes to chlorosilanes, assuming that the experimental conditions are favorable toward the generation of ionic species. Various factors which may govern the migratory aptitudes of various R groups, i.e. (1) activation energies, (2) overall reaction energies and (3) the conformational preference of reactants have been investigated. The calculated activation energy obtained, namely the energy for the generation of the silicenium ion and the C⁻¹ ion from an α-chlorosilane, is consistent with the experimental migratory aptitude in the gas phase observed in mass spectrometers.     

Elementary steps and mechanism of electrodeposition of Al from complex hydride ions in tetrahydrofuran baths

Electrocrystallization of Al cannot be achieved from aqueous media, but is possible from low melting-point organic salts, and from aromatic and etheric solutions. In the present paper studies are reported on the kinetics and mechanisms of electrodeposition of Al from plating baths of varying ratios of AlCl₃ and LiAlH₄ dissolved in tetrahydrofuran (THF). A complementary paper, which follows, deals with the topic of nucleation and growth processes involved in Al phase electrocrystallization and provides experimental results on that process. Steady-state cathodic and anodic Tafel polarization relations are determined, complemented by ac impedance studies. Back-reaction corrected Tafel plots enable anodic and cathodic transfer coefficients (α) to be evaluated together with corresponding stoichiometric numbers (ν). Critical evaluation both of the present α and ν results, and previous α values in the literature, enables a mechanism of elementary steps in Al deposition from the hydrido-chloride baths to be proposed.     

Micellization behavior of [C16-12-C16], 2Br gemini surfactant in binary aqueous-solvent mixtures

The micellization behavior of bis cationic gemini surfactant, N,N′-dihexadecyl-N,N,N′,N′-tetramethyl-1,12-dodecanediammonium dibromide [C₁₆H₃₃N⁺(CH₃)₂-(CH₂)₁₂-N⁺(CH₃)₂C₁₆H₃₃, 2Br⁻] has been studied in binary aqueous mixtures of dimethyl sulfoxide, methanol, 1,4-dioxane, glycerol and ethylene glycol by conductivity and surface tension measurements at 300 K. The critical micellar concentration, degree of micelle ionization (α), surface excess concentration (Г_max), minimum surface area per molecule of surfactant (A_min), Gibbs free energy of micellization (ΔG_m°), the surface pressure at cmc (π_cmc), and the Gibbs energy of adsorption (ΔG_ad°) of the gemini surfactant have also been determined. The cmc, α, A_min increases where as (ΔG_m°), Г_max, and π_cmc decreases with increasing volume percentage of the solvents in the solvent–water binary mixture. The interfacial properties of the gemini surfactant, solute–solute, solvent–solute interactions and the effectiveness of a surface-active molecule in binary solvent systems have been discussed.     

Electroconductivity of Submicron Solid Electrolytes Ce1−x GdxO2−δ as a Function of Their Density and the Gadolinium Content

The effect of the composition and density of ceramics on the electroconductivity of solid electrolytes Ce_{1 − x} Gd_xO_{2 − δ}(x = 0.09–0.31) with a submicron (0.1–0.3 µm) grain size, which are prepared from nanosized powders, is investigated. The powders are synthesized by two methods, specifically, by evaporation of a target with the aid of the radiation of a pulsed carbon dioxide laser and by a chemical method of burning. The samples of ceramics are prepared by magnetopulsed or quasi-isostatic (200–500 MPa) pressing and subsequent caking in air at a temperature of 1100–1300°C. It is established that the electroconductivity of the obtained solid electrolytes is higher and the effective activation energy for conduction is considerably lower as compared with analogous electrolytes with a micron grain size.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 694–701.Original Russian Text Copyright © 2005 by Ivanov, Kotov, Gorelov, Borisov, Murzakaev, Samatov, Medvedev, Khrustov, Ivin, Zayats, Balakireva, Sharova, Kuz’min, Vaganov, Moskalenko.Published on the basis of a contribution delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Substoichiometric TiCl4-mediated vicinal difunctionalization of α,β-acetylenic ketones for the synthesis of β-halo Baylis–Hillman olefins

A substoichiometric amount of titanium tetrachloride was found to be effective to promote and participate in the tandem α-hydroxyalkylation/β-chlorination of α,β-acetylenic ketones in the presence of (n-Bu)₄NI. This method provides the concise synthesis of (E)-β-halo Baylis–Hillman adducts. No β-iodo products were detected when using this combination of halogen sources. The reaction process involves 1,4-addition of chloro anion released from TiCl₄ onto α,β-acetylenic ketones to give TiCl₃–allenolate intermediates followed by the titanium Lewis acid-promoted carbonyl addition. Modest to good yields (53–77%) and excellent E/Z stereoselectivity (>95%) have been obtained for 10 examples.     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

The non-isothermal crystallization of α-Fe from Fe₈₁B₁₃Si₄C₂ amorphous alloy was investigated. The kinetic parameters of crystallization process were determined by Kissinger and Kissinger–Akahira–Sunose (KAS) methods. It was established that the kinetic parameters of transformation do not change with the degree of crystallization in the range of 0.1–0.7. The kinetic model of the crystallization process was determined using the Malek's procedure. It was established that the primary crystallization α-Fe phase from amorphous alloy can be described by Šesták–Berggren autocatalytic model with kinetic triplet E_a = 349.4.0 kJ mol⁻¹, ln A = 50.76 and f(α) = α^0.72(1 − α)^1.02.     

Surface potential of spherical polyelectrolyte brushes in the presence of trivalent counterions

We consider the ζ-potential and the effective charge of spherical polyelectrolyte brushes (SPBs) in aqueous solution in the presence of trivalent europium ions. The SPB consists of a polystyrene core of ca. 250 nm diameter onto which long chains of the strong polyelectrolyte poly(styrene sulfonate) are grafted (contour length: 82 nm). At low concentration of EuCl₃ the chains are stretched to nearly full length. If the concentration of the trivalent ions is raised, the surface layer of the polyelectrolyte chains collapses. The ζ-potential of the SPB is calculated from the electrophoretic mobilities measured at different concentrations of EuCl₃. At the collapse, ζ decreases by the partial neutralization of the charges by the trivalent ions. The experimental ζ-potential thus obtained agrees with the theoretical surface potential Ψ_theo calculated for the effective shear plane by a variational free energy model of the SPB.     

Macroscopic and spectroscopic characterization of selenate, selenite, and chromate adsorption at the solid–water interface of γ-Al2O3

The interaction of selenate, selenite, and chromate with the hydrated surface of γ-Al₂O₃ was studied using a combination of macroscopic pH edge data, electrophoretic mobility measurements, and X-ray absorption spectroscopic analyses. The pH edge data show generally increased oxyanion adsorption with decreasing pH, and indicate ionic strength-(in)dependent adsorption of chromate and selenate across the pH range 4–9, and ionic strength-(in)dependent adsorption of selenite in this pH range. The adsorption of chromate peaks at pH 5.0, whereas for selenate and selenite no pH adsorption maxima are observed. Electrophoretic mobility measurements show that all three oxyanions decrease the zeta potential of γ-Al₂O₃ upon adsorption; however, only selenite decreased the pH_PZC of the γ-Al₂O₃ sorbent. EXAFS data indicate that selenite ions are coordinated in a bridging bidentate fashion to surface AlO₆ octahedra, whereas no second-neighbor Al scattering was observed for adsorbed selenate ions. Combined, the results presented here show that pH is a major factor in determining the extent of adsorption of selenate, selenite, and chromate on hydrated γ-Al₂O₃. The results point to substantial differences between these anions as to the mode of adsorption at the hydrated γ-Al₂O₃ surface, with selenate adsorbing as nonprotonated outer-sphere complexes, chromate forming a mixture of monoprotonated and nonprotonated outer-sphere adsorption complexes, and selenite coordinating as inner-sphere surface complexes in bridging configuration.     

Substituent effects of α,β-unsaturated aldehyde compounds in inverse electron demand Hetero-Diels–Alder reactions: A theoretical study

The present work describes the new theoretical study for behaviour estimation of some α,β-unsaturated aldehyde derivatives in inverse electron demand Hetero-Diels–Alder reactions. The theoretical scale has shown rationalization between electrophilic activation/deactivation effects and electron withdrawing (EW) and electron releasing (ER) substituents in these molecules. The electrophilicity values that evaluated with HF/6-31G* method shows a good linear relationship with the σ_p Hammett substituent constants. These results are in excellent agreement with respect to experimental results.     

Oxygen reduction in acid media at the amorphous Mo–Os–Se carbonyl cluster coated glassy carbon electrodes

An amorphous Mo–Os–Se carbonyl cluster compound has been synthesized in 1,2-dichlorobenzene (b.p.≈180°C) to be tested as an electrocatalyst for molecular oxygen reduction in 0.5 M H₂SO₄. Scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) performed for the powder supported on pyrolytic carbon show a distribution of nanometer-scale amorphous particles with agglomerations in cluster forms. The catalytic activity was studied by the rotating disc electrode technique. Kinetic studies show a first-order reaction with a Tafel slope of −0.118 V dec⁻¹ and dα/dT=1.55×10⁻³ K⁻¹. In the temperature range 298–343 K, an activation energy of 32 kJ mol⁻¹ was determined.