The ground state of MoCr(O2CH)4 at theab initio SCF and CI levels. A symmetry adapted RHF energy functional with an artificial double minimum

Ab initio restricted Hartree-Fock (RHF) calculations carried out on the ground state of MoCr(O₂CH)₄ lead to two distinct energy minima according to the initial guess made for the set of trial vectors. It is shown that these two symmetry-adapted wavefunctions can be correlated with a twofold degenerate broken-symmetry solution previously characterized for the related system of higher symmetry Cr₂(O₂CH)₄. Complete CI expansions have been carried out from either RHF polarized wavefunction using as a basis the set of eight frontier MO's with high metal character. These expansions yield poorly resymmetrized wavefunctions. A similar CI expansion has finally been carried out from a wavefunction resymmetrized at the SCF level and corresponding to a saddle point of the RHF energy hypersurface. The total energy associated with this latter expansion is the lowest obtained in the present work. The natural orbital analysis corresponds to ()^1.86()^3.58()^1.54()^0.46()^0.42 (^*)^0.14 and shows that this resymmetrized CI expansion is in many respects similar to the correlated wavefunctions obtained for the homobinuclear parent systems.     

Hydrophosphorylation of 1,3-Diphenyl-2-propen-1-one and 4-Phenyl-3-buten-2-one in the Coordinational Sphere of Carbonyl Complexes of Group VIB Metals

Synthetic procedures for preparing ²- and ⁴-complexes of chalcone and benzalacetone with hexacarbonyl mononuclear complexes of Group VIB metals were developed and conditions for selective ²- and ⁴-coordination of the heterodiene ligand were established. Hydrophosphorylation of the obtained complexes proceeds in the coordination sphere of the metal by the Abramov reaction scheme and yields the corresponding ²-coordinated -hydroxyphosphonates. As follows from quantum-chemical calculations, -coordination with metals makes the heterodienes no longer planar, which explains their regioselective phosphorylation by the more electrophilic carbonyl group.     

Gibbs Energy and Entropy of Mixing in the NaNO2-KNO3 System

The activity and activity coefficients of the components of the NaNO₂-KNO₃ system, determined from the experimental data on the saturated vapor pressure at 798, 823, and 848 K, are used to calculate the relative and excess partial molar Gibbs energies (G _i and G _i ^{e x c}), entropies (S _i and S _i ^{e x c}), and integral relative and excess thermodynamic functions (G, G ^{e x c}, S, and S ^{e x c}) of the system.     

Improved Fluorometric DNA Determination Based on the Interaction of the DNA/Polycation Complex with Hoechst 33258

When DNA is mixed with the cationic polyelectrolyte poly(diallyldimethyl ammonium chloride) (PDDA), the DNA/PDDA complex is formed instantaneously at room temperature. This complex is much more efficient in enhancing the fluorescence of Hoechst 33258 (H 33258) than DNA alone. Based on the interaction of H 33258 with the DNA/PDDA complex, a new fluorescence assay for DNA is described. At pH 7.3 in Tris-HCl buffered solution, the DNA/PDDA complex causes a sharp enhancement in fluorescence intensity of H 33258. Simultanously, the emission maximum wavelength of H 33258 blueshifts from 490nm to 450nm, while the excitation redshifts from 345 to 350nm. The calibration graphs for calf thymus DNA (ctDNA) and herring sperm DNA (hsDNA) are both linear up to 5.0µgmL^–1 when the concentration of H 33258 and PDDA are fixed at 1.5×10^–6 and 1.6×10^–5molL^–1, respectively. The method is specific for native DNA. The 3 detection limits for ctDNA and hsDNA are 1.8 and 5.6ngmL^–1, respectively, i.e. much lower than in the presence of H 33258 alone. Four synthetic samples were determined satisfactorily. This method can also be developed to investigate the formation and the nature of the complexes between DNA and polycations, which have recently been widely applied in some fields such as genetic engineering and gene therapy.     

Thermodynamic modeling of actinide complexation with oxalate at high ionic strength

A geochemical model describing the solubility of actinides in underground water at the Waste Isolation Pilot Plant (WIPP) Project is under development. The database for this model consists of standard chemical potentials and Pitzer model parameters for hundreds of species that may be present in the WIPP disposal room. Organic ligands used in separation and decontamination processes may be present in the nuclear wastes placed in the WIPP site and could have a significant impact on mobile actinide concentrations. In this work the ₁ and ₂ stability constants of NpO₂ ⁺, UO₂ ²⁺, Am³⁺ and Th⁴⁺ with the oxalate anion have been measured in 0.3–5.0M NaCl media at 25 °C by a solvent extraction technique. For the 1:1 complexation, the values of the stability constants increased in the order: NpO₂ ⁺<Am³⁺<UO₂ ²⁺<Th⁴⁺, in accordance with the actinide charge density and reflecting the strongly ionic bonding of the complexes. The Pitzer ionic interaction model was used to model the data. Because the data were collected mainly in the high ionic strength region, values of ⁽¹⁾ were estimated from these plus literature values. The Pitzer model gives a good representation of the data using three interaction parameters ⁽⁰⁾, ⁽¹⁾, and c.     

Excess Molar Volumes and Viscosities of Binary Mixtures of Methanol and the Ionic Liquid 4-Methyl-N-butylpyridinium Tetrafluoroborate at 25, 40, and 50°C

Experimental data of densities and viscosities are presented for the system 4-methyl-N-butylpyridinium tetrafluoroborate + methanol at 25, 40, and 50, 323.15 K and ambient pressure using a vibratage-tube densimeter and an Ubbelohde viscometer. Excess molar volumes V ^E and excess logarithm viscosities (ln )^E have been determined. V ^E is negative and (ln )^E positive over the entire mixture composition.     

Selective Spectrophotometric Determination of Aluminium in the Presence of Beryllium and Lanthanide Cations

A spectrophotometric method for the selective determination of Al(III) in the presence of Be and Ln (lanthanide) cations is proposed. It is based on the selective reaction of SXO (Semi-Xylenol Orange) with Al(III) at pH 2.6. The presence of 8%v/v of 1,2-ethanediol serves to stabilize the chelate formed by heating at 100°C for 5min. 0.5mg each of Be(II), Ce(III), La(III), 4mg of Mn(II), 1.2mg of Pb(II), 1mg of Tl(I), 40mg each of Ca(II) and Mg(II) and 1.9mg of sodium dihydrogen phosphate are tolerable. A ligand buffer of HEDTA-Pb is incorporated to further enhance the selectivity of the color reaction. Under the specified conditions SXO reacts with Al(III) to form a 1:1 chelate. Its molar absorptivity at 526nm was found to be 3.3×10⁴Lmol^–1cm^–1. The linear regression equation for 2–20µg of Al(III) is A=0.04458C+0.0112 (where C stands for the concentration of Al(III), µg per 25mL) and correlation coefficient =0.9988. The RSD at the level of 10µg (n=10) and LOQ were found to be 3.5% and 2µg, respectively.     

Determination of aluminium in chewing gum samples using electrothermal atomic-absorption spectrometry and slurry sample introduction

A slurry-based electrothermal atomic absorption spectrometric procedure for the rapid determination of aluminium in chewing gum samples is discussed. To achieve a sufficiently small particle size, the samples have been first submitted to a mild calcination stage. Suspensions have been then prepared from the ground carbonaceous residues in a medium containing 8% v/v ethanol, 1% v/v concentrated nitric acid, 0.2% m/v magnesium nitrate and 4% v/v concentrated hydrogen peroxide. Aliquots of 10 l have been introduced in the furnace and dried at 200° C for 20 s. No ashing step has been used. Wall atomization has been performed at 2600° C. Calibration has been carried out with aqueous standards. The reliability of the procedure has been checked by analyzing standard reference materials and by comparing the results for eight commercial samples with those found by a conventional procedure based on the complete dissolution of the samples. The results for the commercial samples are in the 36–64 g g^–1 range, only one of the samples giving a higher value of 123 g g^–1.     

Combined Dynamic Model for the Kinetics of Electron Transfer from Cytochrome to a Bacteriochlorophill Dimer in Reaction Centers of Rps. Sulfoviridis

The electron transfer from the heme of cytochrome c to the bacteriochlorophill dimer in reaction centers of photosynthetic purple bacteria Rps. sulfoviridis is studied by laser flash photolysis at 40–296 K in conditions where one, two, or three cytochrome hemes are chemically reduced. In the model used for the electron transfer kinetics, the protein relaxation is described with a temperature-independent oscillatory coordinate and a temperature-dependent diffusion coordinate, with the protein dielectric relaxation times widely distributed along the diffusion coordinate. It is found that all the protein complexes can be divided into proteins with fast (k _et = 10⁷ to 10^–4 s^–1) and slow (k _et 100 s^–1) electron transfer. These populations presumably differ by the protonation state of the functional group. The contribution of the oscillatory and diffusion coordinates alters, which severely affects k _et. Parameters V _ab, G, , ₀, and for these reactions are determined.     

Determination of239,240Pu and241Am in environmental samples

An accurate and reliable method has been developed and routinely carried out for the sequential determination of^239,240Pu and²⁴¹Am in environmental samples. After suitable pretreatment.^239,240Pu and²⁴¹Am are separated from other elements by means of the anion exchange resin method. Americium-241 is purified by coprecipitation with calcium oxalate and then ion exchanged in mixed media of the mineral acid-methanol. In the analysis,²⁴²Pu (or²³⁶Pu) and²⁴⁴Cm are used as chemical yield monitors. The recoveries of the yield monitors in the analyses of some kinds of environmental samples were 7080% for plutonium and 7686% for curium. The concentration of^239,240Pu in the coastal sea water were 7.022 Bq/l and that of²⁴¹Am was 1.26.3 Bq/l. The mean concentrations of^239,240Pu in the edible parts of the marine products ranged from 0.22 to 7.4 mBq/kg · fresh and those of²⁴¹Am ranged from 0.11 to 2.6 mBq/kg · fresh.     

The Exciton Model and the Circular Dichroism of Polypeptides

Summary. Exciton coupling of the 190nm ^* transition is an important factor in the CD spectrum of peptides and proteins. The CD spectrum of the -helix is dominated by the exciton effect. The spectrum is sensitive to the direction of the ^* transition dipole moment, especially for short helices. Exciton theory is much less successful in accounting for the CD spectrum of the poly(proline)II (PPII) conformation, an important conformer in collagen and in unordered peptides. Mixing of the ^* transition with high-energy transitions in the peptide backbone and in side chains must be considered to explain the strong negative CD band near 200nm of PPII.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Effect of high pressure on the rate constant of the Diels-Alder reaction between furan and maleic anhydride

The effect of high pressure (up to 700 MPa) on the rate of the Diels-Alder reaction between furan and maleic anhydride has been investigated in deuterated acetone at 20C. The volume effect of the reaction at atmospheric pressure is found to be V₀=–28.0 cm³/mole. The rate constants for the formation, decomposition and isomerization of the products have been found by numerical integration. The volume of activation V in the pressure range studied has been determined from the observed dependence of log k upon P by spline approximation and was found to be –30.5 cm³/mole at atmospheric pressure, close to the volume change in the reaction, which is consistent with the assumption of a conjugated cyclic transition state.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 525–529, March, 1990.     

Determination of boron isotopic variations in aquatic systems with negative thermal ionization mass spectrometry as a tracer for anthropogenic influences

A technique for precise boron isotope ratio measurements with a high detection power has been developed by negative thermal ionization mass spectrometry (NTIMS). Relative standard deviations in the range of 0.03–0.3% have been obtained for the determination of the ¹¹B/¹⁰B isotope ratio using nanogram amounts of boron. Ba(OH)₂ has been applied as ionization promoter for the formation of negative thermal ions. By adding MgCl₂ better reproducibilities of the measurement have been achieved. A possible interference of BO^-₂ ions at mass number 42 by CNO^- could be excluded by the sample preparation technique used. Contrary to other NTI techniques no dependence of the measured isotope ratio on the boron amount used has been observed. Anthropogenic and natural saline influences in ground water have been successfully identified by boron isotope ratio determinations with this NTIMS method, due to the different isotopic composition of boron in natural and anthropogenic substances. In sewage, the boron isotope ratio is substantially influenced by washing powder, which contains low ¹¹B/¹⁰B ratios (expressed in ¹¹B values normalized to the standard reference material NIST SRM 951). In contaminated ground water, low ¹¹B values are normally correlated with high boron and high chloride concentrations. On the other hand, ¹¹B shifts to higher values in less contaminated samples. For ground water with saline influences, only the ¹¹B determination, and not the boron or chloride content, allowed the correct identification of this natural source of contamination.     

Redox-induced η5 ⇔ η3 haptotropy of the fluorenyl ligand in 9-substituted η5-fluorenylmanganesetricarbonyl complexes

It has been shown by cyclic voltammetry in THF within the –90 to 40 °C temperature range that fluorenyl (⁵-9-R-C₁₃H₈)Mn(CO)₃ complexes (R=Bu^t (3) and Ph (4)) undergo two-electron reduction to form allyl type [(³-9-R-C₁₃H₈)Mn(CO)₃]^2– dianions as final products. At low temperatures complexes3 and4 are reduced in two one-electron steps according to the EEC-scheme. The first step is reversible and corresponds to the formation of 19-radical anions 3^–. and 4^–.. TheE ⁰ values for redox pairs3 ^0/–. and4 ^0/–. are –1.88 and –1.73 V, respectively. The further reduction of radical anions3 ^–. and4 ^–. at more negative potentials is accompanied by fast ^{5 3} haptocoordination of the fluorenyl ligand to form 18-dianions [(³-9-R-C₁₃H₈)Mn(CO)₃]^2–. These dianions obtained by the reduction of complexes3 and4 by the radical anion of pyrene are stable at –80 °C and are characterized by their IR spectra. At room temperature the ^{5 3} hapticity change is a fast and reversible process occurring at the step of 19-radical anions3 ^–. and4 ^–. and leading to the electron deficient 17-species [(³-9-R-C₁₃H₈)Mn(CO)₃]^–., which are reduced easier than the initial complexes. As a result, complexes3 and4 are reduced to the corresponding dianions [(³-9-R-C₁₃H₈)Mn(CO)₃]^2– at room temperature in one reversible two-electron step according to the ECE-scheme. Reactivities of 19e^–-species of the isomeric ⁵- and ⁶-fluorenylmanganesetricarbonyl complexes are compared.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1347–1353, July, 1995.The work was financially supported by the Russian Foundation for Basic Research (Project No. 93-03-05209) and the International Science Foundation (Grant No. REV 000).     

Did we catch the point of the immunoassay principle correctly?

The present study was aimed at examining the degree of saturation of antibody in immunoassay. The results show that in equilibrium type immunoassay antibody is not fully occupied by antigen at any virtual point of the calibration curve since antibody saturation would lead to B/F=0. Calculations suggest that in an immunoassay meeting the condition p^*0 both relationships between antigen (p) and antibody (q) concentrations can be found (i.e. p<q; p>q). This is probably generally valid for any assay independently of the experimental technique and tracer used when a fixed amount of binder (antibody, receptor, etc.) is used for the analysis of a binding substance (antigen, ligand, etc.), and the proportion of their interaction is evaluated. Also, the appropriateness of the terms saturation analysis and limited and/or excess reagent assay for immunoassay is discussed.     

Determination of the Nitrogen Atom Density in the Afterglow of a Nitrogen and Helium,Nonequilibrium, Atmospheric Pressure Plasma

Three methods have been examined for evaluating the concentration of nitrogen atoms in the afterglow of a nonequilibrium, helium-stabilized, atmospheric pressure plasma. These are nitric oxide titration, absolute emission intensity of N₂(B ³_g) and temporal decay of the N₂(B ³_g) emission. To employ the second method, the rate constants for the recombination of N atoms into N₂(B ³_g), at different vibrational levels of the B state, were determined. The third newly developed method has three advantages over the other two techniques: (1) it can predict the N-atom density for the entire afterglow, (2) it does not require calibration of the N₂(B ³_g) emission intensity, and (3) it does not disturb the gas flow. According to these measurements, the atmospheric pressure plasma produced a high density of nitrogen atoms, exceeding 4.0×10¹⁵ cm^–3 at the edge of the discharge for 10 Torr N₂ in 745 Torr He at 375 K and 15.5 W/cm³.     

NMR Spectral Assignment of Per-substituted Key-Intermediates of β-Cyclodextrin and Implications in the Structures of the Derivatives

The compounds, 6-per-O-(t-butyldimethylsilyl)--cyclodextrin(1), 2,3-per-O-benzyl-6-per-O-(t-butyldimethylsilyl)--cyclodextrin(2), 2,3-per-O-benzyl--cyclodextrin (3),2,3,6-per-O-benzyl--cyclodextrin (4),2,3,6-per-O-benzoyl--cyclodextrin (5), are used as keyintermediates in the synthesis of selectively substituted -CD derivatives. Simple and assignable ¹H and ¹³C NMR spectra (chemical shifts and coupling constants) were obtained for compounds1–4 indicating C₇ symmetry, ⁴C₁ glucose conformation and major arrangement of H6, H6' atoms at the primary side. The derivative 5, however, gave very broad peaksat room temperature. The peaks could partially be assigned at 270 K, but the broadening was still present at 220 K. This implies that there exist several conformers of similar energyand C₁ symmetry that continuously interchange, since there is not a single type of stabilizing interaction thatpredominates. We attributed this phenomenon to the presence of the carbonyl group, which probablydisfavors - stacking and induces random arrangements of the aromatic rings.     

The structure of “photobilirubin”

Anaerobic irradiation of bilibrubin in the region of the main absorption band produces the diastereomers of (Z,E)- and (E,Z)-configurations with high quantum yield. The structure of these photobilirubins is proven by a chemical correlation with the corresponding diastereomers of biliverdindimethylester characterised before. Their¹H-NMR spectroscopic features have been recorded and are discussed.

---

Die Struktur der Photobilirubine

Zusammenfassung Anaerobe Bestrahlung von Bilirubin im Gebiet der Hauptabsorptionsbande ergibt in hoher Quantenausbeute die Diastereomeren der Konfigurationen (Z,E) und (E,Z). Die Struktur dieser Photobilirubine wird durch eine chemische Korrelation mit den entsprechenden bekannten Diastereomeren des Biliverdindimethylesters bewiesen. Die¹H-NMR-Daten der Diastereomeren werden diskutiert.

     

Effect of the chemical structure of nitroxyl radicals on their reactivity in the reaction with hydrazobenzene and tetranitromethane

The reaction rate constants of reduction of stable radicals of different classes by hydrazobenzene in hexane at 20C, in the range of 0.4–5·10³ M^–1sec^–1, were determined; a single scale of the oxidative properties of stable nitroxyl radicals was constructed. The rate constants of oxidation of a series of nitroxyl radicals by tetranitromethane in aqueous medium at 20C, in the range of 0.06–10 M^–1·sec^–1, were determined. It was shown that the oxidative properties of the nitroxyl group decrease slightly with an increase in its reducing properties for nitroxyl radicals of the piperidine and imidazoline series in reactions with ascorbic acid and tetra-nitromethane in aqueous medium, respectively.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2575–2582, November, 1990.