Nuclear superstructure {1/2, 0, 1/2} of an La<Subscript>0.93</Subscript>Sr<Subscript>0.07</Subscript>MnO<Subscript>3</Subscript> manganite orthorhombic crystal

The {1/2, 0, 1/2} nuclear superstructure in an La_0.93Sr_0.07MnO₃ manganite orthorhombic crystal is revealed using thermal-neutron diffraction. It is demonstrated that this superlattice belongs to the class of distortion-type structures and is directly associated with a 1/16-type ordering of Mn⁴⁺ and Mn³⁺ ions in a collinear ferromagnetic phase of the La_0.93Sr_0.07MnO₃ manganite.     

Phase separation in a manganite La<Subscript>0.95</Subscript>Ba<Subscript>0.05</Subscript>MnO<Subscript>3</Subscript> crystal

The structure and magnetic states of a crystal of lightly doped manganite La_0.95Ba_0.05MnO₃ were studied using thermal-neutron diffraction, magnetic measurements, and electrical resistance data in a wide temperature range. It is shown that, in terms of its magnetic properties, the orthorhombic crystal is characterized by two order parameters, namely, antiferromagnetic (T _N = 123.6 K) and ferromagnetic (T _C = 136.7 K). The results obtained differ in detail from known information on the manganites La_0.95Ca_0.05MnO₃ and La_0.94Sr_0.06MnO₃. Two models of the magnetic state of the La_0.95Ba_0.05MnO₃ crystal are discussed, one of which is a model of a canted antiferromagnetic spin system and another is associated with the phase separation of the manganite. Arguments are advanced in favor of the coexistence in this crystal of the antiferromagnetic phase (about 87%) with a Mn⁴⁺ ion concentration of 0.048 and the 1/16-type charge-ordered ferromagnetic phase (about 13%) with a Mn⁴⁺ ion concentration of 0.0625. The specific features of the manganite studied are due to self-organization of the La_0.95Ba_0.05MnO₃ crystal lattice caused by the relatively large barium ion size.     

Acoustical investigations of a La<Subscript>0.75</Subscript>Sr<Subscript>0.25</Subscript>MnO<Subscript>3</Subscript> single crystal

The acoustical, resistive, and magnetic properties of a La_0.75Sr_0.25MnO₃ lanthanum manganite single crystal are investigated in the temperature range involving the second-order magnetic phase transition. The acoustical measurements are performed by the pulse-echo method in the frequency range 14–90 MHz. It is found that, as the temperature decreases, the velocity of a longitudinal acoustic wave propagating along the [111] axis in the single crystal drastically increases at temperatures below the critical point of the magnetic phase transition. No dispersion of the acoustic velocity is revealed. A sharp increase in the acoustic velocity is accompanied by the appearance of an acoustical absorption peak. The observed effects are discussed with due regard for the interaction of acoustic waves with the magnetic moments of the manganese ions.     

Peculiarities of magnetic phase separation in anion-deficient La<Subscript>0.70</Subscript>Sr<Subscript>0.30</Subscript>MnO<Subscript>2.85</Subscript> manganite

The temperature and field dependences of the specific magnetic moment of the anion-deficient La_0.70Sr_0.30MnO_2.85 manganite have been measured. It is established, that the magnetic state of the sample studied is a cluster spin glass and it is the result of frustration of exchange Mn³⁺-O-Mn³⁺ interactions due to the redistribution of oxygen vacancies. The increase of the magnetic field leads to an increase in the degree of polarization of local spins of manganese. It is established using the magnetic criterion that a phase transition into the paramagnetic state for the anion-deficient La_0.70Sr_0.30MnO_2.85 manganite is a thermodynamic second order phase transition. The causes and mechanism of the magnetic phase separation are discussed.     

Study of mechanochemically prepared nanocrystalline La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>MnO<Subscript>3</Subscript>

The nanocrystalline La_0.8Sr_0.2MnO₃ (LSM) is prepared by varying the revolutions per minute and milling time of planetary monomill during the mechanochemical method. The LSM forms in a relatively shorter milling time with an increase in the milling speed from 250 to 600 rpm. The structural phase transition from orthorhombic to rhombohedral phase in the LSM prepared by ball milling at the speed 250 rpm for 36 h is seen due to sintering it at 700 °C for 4 h. The crystallite size reduces with the increase in both the milling speed and the milling time individually or combined. The microhardness (HV) and sintered density increase with the reduction in the crystallite size. The temperature-activated transition temperature is suppressed by reducing the grain size in the nanometer range. The electrical dc conductivity increases with the reduction in the grain/crystallite size.     

High-frequency ultrasonic studies of the structural phase transition in an La<Subscript>0.875</Subscript>Sr<Subscript>0.125</Subscript>MnO<Subscript>3</Subscript> single crystal

The specific features of a phase transition from a disordered orbital state to an ordered orbital state in an La_0.875Sr_0.125MnO₃ single crystal are investigated using acoustic methods at a frequency f = 500 MHz. The phase transition is accompanied by a distortion of MnO₆ octahedra due to the cooperative Jahn-Teller effect and is a first-order phase transition, as judged from the sharp change observed in the damping of acoustic pulses, the acoustic wave velocity, and the temperature hysteresis. It is revealed that the parameters of the acoustic waves change significantly throughout the temperature range of existence of the cooperatively distorted structure. In an external magnetic field, the structural phase transition is shifted toward lower temperatures.     

Metal-insulator transition in a radiation-disordered La<Subscript>0.85</Subscript>Sr<Subscript>0.15</Subscript>MnO<Subscript>3</Subscript> manganite

The temperature dependences of the electrical resistivity ρ(T) and the ac magnetic susceptibility χ(T, H = 0) are thoroughly investigated for a perovskite-like lanthanum manganite, namely, La_0.85Sr_0.15MnO₃, which is preliminarily exposed to neutron irradiation with a fluence _F = 2 × 10¹⁹ cm^?2 and then annealed at different temperatures ranging from 200 to 1000°C. The results of the electrical resistance measurements demonstrate that neutron irradiation of the samples leads to the disappearance of the low-temperature insulating phase. As the annealing temperature increases, the insulating phase is not restored and the manganite undergoes a transformation into a metallic phase. Analysis of the magnetic properties shows that, under irradiation, the ferromagnet-paramagnet phase transition temperature T_C decreases and the magnetic susceptibility is reduced significantly. With an increase in the annealing temperature, the phase transition temperature T_C and magnetic susceptibility χ(_{T, H} = 0) increase and gradually approach values close to those for an unirradiated sample. This striking difference in the behavior of the electrical and magnetic properties of the radiation-disordered La_0.85Sr_0.15MnO₃ manganite is explained qualitatively.     

Effect of an interface boundary on the magnetooptical and magnetotransport properties of La<Subscript>0.67</Subscript>Ca<Subscript>0.33</Subscript>MnO<Subscript>3</Subscript>/La<Subscript>0.67</Subscript>Sr<Subscript>0.33</Subscript>MnO<Subscript>3</Subscript> heterostructures

The optical, magnetooptical (Kerr effect and magnetotransmission), and magnetotransport properties of La_2/3Ca_1/3MnO₃/La_2/3Sr_1/3MnO₃ and La_2/3Ca_1/3MnO₃/SrTiO₃/La_2/3Sr_1/3MnO₃ heterostructures on SrTiO₃ substrates are studied. The contribution of the interface boundary to the magnetotransmission is typical of a material with a transitional composition. It is found that a 2-nm-thick SrTiO₃ spacer does not influence the shape and position of the magnetotransmission peak in a field normal to the surface of the heterostructure but increases the contribution of the upper layer to the magnetotransmission in the Voigt geometry and also enhances the magnetoresistance that is due to the tunneling of spin-polarized carriers through the spacer. The Kerr spectra taken of the heterostructures are typical of single-layer single-crystal films.     

Magnetotransport properties of nano-constriction array in La<Subscript>0.67</Subscript>Sr<Subscript>0.33</Subscript>MnO<Subscript>3</Subscript> film

Nano-constriction array in La_0.67Sr_0.33MnO₃ film was fabricated by using ion beam etching masked by a monolayer of packed and ordered array of SiO₂ microspheres. Nano-constrictions of around 50 nm in width were fabricated. The low field magnetoresistance (LFMR) exhibited in the samples were observed to be current dependent and the I-V characteristics of the film were found to be nonlinear. These observations were attributed to the co-existence of the ferromagnetic regions and the nano-constricted region of weakened ferromagnetic coupling where Mn³⁺-O-Mn⁴⁺ bond were distorted due to the ion beam bombardment. The spin polarized bias current would strengthen local ferromagnetic coupling when passing through this nano-constricted regions. This current effect is relatively large comparing to the external magnetic field to the drop of resistance.     

Acoustic and magnetic properties of La<Subscript>0.825</Subscript>Sr<Subscript>0.175</Subscript>MnO<Subscript>3</Subscript> lanthanum manganites

This paper reports on measurements of the acoustic, magnetic, and electrical properties and on an x-ray microprobe analysis of a La_0.825Sr_0.175MnO₃ single-crystal sample. The acoustic studies were made with a pulsed acoustic spectrometer operating on a 770-MHz carrier. The studies revealed anomalies in the damping coefficients and sound velocity near 300, 200 K, and the Curie temperature T_C (283 K) where the colossal magnetoresistance occurs. The effect of a magnetic field on the magnetic texture of lanthanum manganites cooled below T_C, observed earlier in samples of other composition, is confirmed. In addition, a region was found wherein the magnetic susceptibility of an unclamped sample behaves anomalously. The electrical resistivity was observed to decrease substantially below T_C; this effect exhibits a hysteretic pattern in the interval 200–180 K.     

Magnetotransport characteristics of strained La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> epitaxial manganite films

The electrical and magnetic characteristics of La_0.7Sr_0.3MnO₃ (LSMO) epitaxial manganite films are investigated by different methods under conditions when the crystal structure is strongly strained as a result of mismatch between the lattice parameters of the LSMO crystal and the substrate. Substrates with lattice parameters larger and smaller than the nominal lattice parameter of the LSMO crystal are used in experiments. It is shown that the behavior of the temperature dependence of the electrical resistance for the films in the low-temperature range does not depend on the strain of the film and agrees well with the results obtained from the calculations with allowance made for the interaction of electrons with magnetic excitations in the framework of the double-exchange model for systems with strongly correlated electronic states. Investigations of the magneto- optical Kerr effect have revealed that an insignificant (0.3%) orthorhombic distortion of the cubic lattice in the plane of the NdGaO₃(110) substrate leads to uniaxial anisotropy of the magnetization of the film, with the easy-magnetization axis lying in the substrate plane. However, LSMO films on substrates (((LaAlO₃)_0.3+(Sr₂AlTaO₆)_0.7)(001)) ensuring minimum strain of the films exhibit a biaxial anisotropy typical of cubic crystals. The study of the ferromagnetic resonance lines at a frequency of 9.76 GHz confirms the results of magnetooptical investigations and indicates that the ferromagnetic phase in the LSMO films is weakly inhomogeneous.     

Pressure-induced modifications of crystal and magnetic structure of oxygen deficient La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3-d</Subscript> manganites

The crystal and magnetic structures of the oxygen deficient manganites La_0.7Sr_0.3MnO_3-d (d = 0.15, 0.20) have been studied by means of powder neutron diffraction over the 0–5.2 GPa pressure and 10–290 K temperature ranges. La_0.7Sr_0.3MnO_2.85 exhibits a coexistence of rhombohedral and tetragonal (I4/mcm) crystal structures and below T_g ~ 50 K a spin glass state is formed. La_0.7Sr_0.3MnO_2.80 exhibits a tetragonal (I4/mcm) crystal structure. Below T_g ~ 50 K a phase separated magnetic state is formed, involving coexistence of C-type AFM domains with spin glass domains. In both compounds the crystal structure and magnetic states remain stable upon compression. The factors leading to the formation of different magnetic states in La_0.7Sr_0.3MnO_3-d (d = 0.15, 0.20) and their specific high pressure behavior, contrasting with that of the stoichiometric A_0.5Ba_0.5MnO₃ (A = Nd, Sm) compounds showing pressure-induced suppression of the spin glass state and the appearance of the FM state, are analysed.     

Current-induced Conductance Jumps in Mechanically Controllable Junctions of La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> Manganites

The magnetic switching processes in mechanically controllable junctions (MCJ), made from high-quality single crystals of La_0.7Sr_0.3MnO₃, are studied as a function of the DC current (up to 10⁹ A/cm²) passing through the nanoconstriction. The current-voltage (I-V) curves of the MCJ are typical for an electron tunnelling process. By fitting I-V curves to the Simmons model, the barrier width (1 - 1.6) nm and height (0.4 - 1.7) eV of the junctions and their effective tunnel area (1-10) × 10^?11 cm² were estimated. Based on the close relation between transport properties and the magnetization in manganese compounds, we interpret the jumps in the conductance of MCJ, by integer multiples of e²/h, as due to the configuration reorientation of the magnetization of the Mn-ions clusters at the constriction surfaces.     

Kinetics of magnetization reversal in a thin La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> manganite film

The kinetics of magnetization reversal of a thin LSMO film has been studied for the first time. It is shown that the magnetic domain structure critically depends on the conditions of structure formation. In the demagnetized state (after zero-field cooling from T _c ), a maze-like domain microstructure with perpendicular magnetization is formed in the film. However, after field cooling and/or saturating magnetization by a field of arbitrary orientation, the [110] direction of spontaneous magnetization in the film plane is stabilized; this pattern corresponds to macrodomains with in-plane magnetization. Further film magnetization reversal (both quasi-static and pulsed) from this state is implemented via nucleation and motion of 180° “head-to-head” domain walls. Upon pulse magnetization reversal, the walls “jump” at a distance proportional to the applied field strength and then undergo thermally activated drift. All dynamic characterisitcs critically depend on the temperature when the latter varies around the room temperature.     

A sonochemical-assisted synthesis and annealing temperature effect of La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> nanoparticles

This paper reports on the sonochemical-assisted synthesis of La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles (NPs) which have a single-crystalline perovskite structure. The average particle size of LSMO NPs was controlled from about 40 to 120 nm by changing the annealing temperatures from 750 to 1050°C. The particle size, electrical resistivity, and ferromagnetic transition temperature of LSMO NPs were strongly dependent on the annealing temperature. A substantial decrease in resistivity and an enhancement in the insulator–metal transition temperature were found on increasing the annealing temperature. Furthermore, the enhancement in magnetization and paramagnetic–ferromagnetic (PM–FM) transition temperatures was observed as the annealing temperature increases.     

Positive magnetoresistance of La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript>/C Composites at room temperature

Two-phase composites xLa_0.7Sr_0.3MnO₃/(100–x)C (x = 5–85 mass %) have been synthesized. The magnetoresistive properties of these materials in magnetic fields from 0 to 15 kOe have been investigated. It has been shown that, at room temperature, the positive isotropic magnetoresistance for samples with x = 50–60 mass % reaches 15%.     

Elastic properties of La<Subscript>0.82</Subscript>Ca<Subscript>0.18</Subscript>MnO<Subscript>3</Subscript> single crystal

The temperature dependences of the velocity of longitudinal sound waves and the internal friction in a La_0.82Ca_0.18MnO₃ single crystal with the Curie temperature T _C = 181 K have been studied. As temperature decreases, the single crystal is shown to undergo the transition from the pseudocubic O* to the Jahn–Teller O’ phase at T ~ 254 K and the reverse transition from O’ to O* phase at T ~ 84 K. The velocity of sound and the internal friction in the O’ phase are found to be significantly smaller than those in the O* phase.     

NO<Subscript>2</Subscript>-sensing properties of La<Subscript>0.65</Subscript>Sr<Subscript>0.35</Subscript>MnO<Subscript>3</Subscript> synthesized by self-propagating combustion

Ultrafine-structure La_0.65Sr_0.35MnO₃ (LSM) powders synthesized by self-propagating combustion method have been used to fabricate sensing electrodes (SEs) for NO₂ mixed-potential sensors based on yttria-stabilized zirconia (YSZ). This type of sensor was found to provide better NO₂ sensitivity at 500 °C than sensors with LSM powders synthesized by traditional solid-state methods. The response values of the sensor have good linear relationship (sensitivity 36.6 mV/decade and linear fit 0.99) with the logarithm of NO₂ concentration varying from 30 to 500 ppm. The influence of sintering temperature (1000, 1100, 1200, and 1300 °C) on sensor response was also examined and was found to have a significant effect on the morphology of LSM-SEs. Moreover, in the presence of NO, CO₂, CO, and NO₂, the sensor exhibited good NO₂ selectivity.     

The magnetic and hyperthermia studies of bare and silica-coated La<Subscript>0.75</Subscript>Sr<Subscript>0.25</Subscript>MnO<Subscript>3</Subscript> nanoparticles

The magnetic nanoparticles of La_0.75Sr_0.25MnO₃ perovskite manganite with a controlled size were prepared via sol–gel procedure, followed by thermal treatment and subsequent mechanical processing of the resulting raw product. The prepared materials were structurally studied by the XRD and TEM methods and probed by DC magnetic measurements. The nanoparticles of the mean crystallite sizes 11–40 nm exhibit T _C in the range of ≈310–347 K and the sample possessing 20-nm crystallites was identified as the most suitable for hyperthermia experiments. In order to obtain a colloidally stable suspension and prevent toxic effects, the selected magnetic cores were further encapsulated into silica shell using tetraethoxysilane. The detailed magnetic studies were focused on the comparison of the raw product, the bare nanoparticles after mechanical processing and the silica-coated nanoparticles, dealing also with effects of size distribution and magnetic interactions. The heating experiments were carried out in an AC field of frequencies 100 kHz–1 MHz and amplitude 3.0–8.9 kA m⁻¹ on water dispersions of the samples, and the generated heat was deduced from their warming rate taking into account experimentally determined thermal losses into surroundings. The experiments demonstrate that the heating efficiency of the coated nanoparticles is generally higher than that of the bare magnetic cores. It is also shown that the aggregation of the bare nanoparticles increases heating efficiency at least in a certain concentration range.     

Magnetic state of the structural separated anion-deficient La<Subscript>0.70</Subscript>Sr<Subscript>0.30</Subscript>MnO<Subscript>2.85</Subscript> manganite

The results of neutron diffraction studies of the La_0.70Sr_0.30MnO_2.85 compound and its behavior in an external magnetic field are stated. It is established that in the 4–300 K temperature range, two structural perovskite phases coexist in the sample, which differ in symmetry (groups R[`3]cR\bar 3c and I4/mcm). The reason for the phase separation is the clustering of oxygen vacancies. The temperature (4–300 K) and field (0–140 kOe) dependences of the specific magnetic moment are measured. It is found that in zero external field, the magnetic state of La_0.70Sr_0.30MnO_2.85 is a cluster spin glass, which is the result of frustration of Mn³⁺-O-Mn³⁺ exchange interactions. An increase in external magnetic field up to 10 kOe leads to fragmentation of ferromagnetic clusters and then to an increase in the degree of polarization of local spins of manganese and the emergence of long-range ferromagnetic order. With increasing magnetic field up to 140 kOe, the magnetic ordering temperature reaches 160 K. The causes of the structural and magnetic phase separation of this composition and formation mechanism of its spin-glass magnetic state are analyzed.