Interaction between polymer and anionic/nonionic surfactants and its mechanism of enhanced oil recovery

Various experimental methods were used to investigate interaction between polymer and anionic/nonionic surfactants and mechanisms of enhanced oil recovery by anionic/nonionic surfactants in the present paper. The complex surfactant molecules are adsorbed in the mixed micelles or aggregates formed by the hydrophobic association of hydrophobic groups of polymers, making the surfactant molecules at oil-water interface reduce and the value of interfacial tension between oil and water increase. A dense spatial network structure is formed by the interaction between the mixed aggregates and hydrophobic groups of the polymer molecular chains, making the hydrodynamic volume of the aggregates and the viscosity of the polymer solution increase. Because of the formation of the mixed adsorption layer at oil and water interface by synergistic effect, ultra-low interfacial tension (～2.0?×?10^?3 mN/m) can be achieved between the novel surfactant system and the oil samples in this paper. Because of hydrophobic interaction, wettability alteration of oil-wet surface was induced by the adsorption of the surfactant system on the solid surface. Moreover, the studied surfactant system had a certain degree of spontaneous emulsification ability (D50?=?25.04?µm) and was well emulsified with crude oil after the mechanical oscillation (D50?=?4.27?µm).     

SANS studies of the effects of surfactant head group on aggregation properties in water/glycol and pure glycol systems

Aggregation in mixed water-glycol and pure glycol solvents has been investigated with four related surfactants, bearing common C12 tails: anionic, sodium dodecylsulfate (SDS); cationic, dodecyltrimethylammonium bromide (C12TAB); zwitterionic C12-amidopropyldimethylamine betaine (betaine) and nonionic, octaethyleneglycol monododecyl ether (C12E8). The solvent media were water, water/ethylene glycol, and water/propylene glycol mixtures, as well as pure ethylene glycol (EG) and propylene glycol (PG), spanning relative dielectrics epsilon(r) from 79 to 30. Results from small-angle neutron scattering (SANS) experiments, employing deuterated solvents, were consistent with the presence of ellipsoidal, or cylindrical micelles, depending on solvent and surfactant type. In pure EG and PG solvents the ionic and zwitterionic surfactants exhibit only weak aggregation, with much smaller micelles than normally found in water. However, interestingly, pure EG is identified as a solvent in which nonionic C12E8 aggregates strongly, mirroring the behavior in water. In contrast when the solvent is changed to PG (epsilonr=30) aggregation of C12E8 is only minimal. Hence, aggregation is shown to be strongly dependent on surfactant type and identity of the glycol solvent.     

FLUORESCENCE PROBE FOR MICROENVIRONMENTS: A NEW PROBE FOR MICELLE SOLVENT PARAMETERS AND PREMICELLAR AGGREGATES

Abstract— A previous study on the electronic spectroscopy of p -N,N-dialkylaminobenzylidenemalononitrile, 1, has been extended to a larger variety of organic solvents and to micelles of ionic and nonionic surfactants. By comparing the fluorescence emission (λ_F and φ_∫) of 1 in micelles and in homogeneous organic solvents, the effective polarity and the microviscosity of the micellar environments of potassium dodecanoate, sodium dodecyl sulfate, cetyltrimethylammonium bromide and Triton X-100 micelles have been determined to be 40, 40, 36 and 28, respectively and 23, 31, 34 and 28 cP, respectively. These results indicate that the fluorescence probe is located in the micelle–water interface of a micelle and this region of a micelle is polar and viscous. 1 has also been studied in different surfactants with varying surfactant concentrations. The φ_∫ of 1, a microviscosity gauge for micellar aggregates, remains unchanged at the critical micelle concentrations of various surfactants, but decreases at much lower surfactant concentrations. This is attributable to the formation of premicellar aggregates of surfactant molecules below their critical micelle concentrations.     

混合反胶束的电导与微结构研究

反胶束是两亲分子在非极性溶剂中形成的一种有序组合体，在医药、化工、采油、胶束催化及酶催化等领域中有重要应用．与胶束溶液相比，人们对反胶束的形成与结构的了解至今仍不充分．特别是对于由混合表面活性剂形成的反胶束的研究几乎无人涉及．本文采用动态光散射、电导及荧光光谱等手段对阴离子表面活性剂AOT与非离子表面活性剂形成的混合反胶束进行了研究，旨在探讨利用表面活性剂的复配来调节和控制反胶束的结构和性能．亚实验部分二异辛基磺化琉璃酸钠（AOT，Sigma公司）；Brij30为含4个氧乙烯基（EO基）的十二碳醇（AcrosOrgani…     

Characterization of nanostructured hollow polymer spheres with small-angle neutron scattering (SANS)

Hollow polymer spheres synthesized from a vesicle-directed polymerization can be dried and redispersed in water using a variety of nonionic ethoxylated alcohol surfactants as stabilizers. The final dispersions consist of both polymer shells and surfactant micelles, which remain together in colloidal suspension for at least several months. Small-angle neutron scattering (SANS) is used to measure the polymer shell thickness (63 A) and core radius (560 A) of the surfactant-stabilized hollow polymer spheres in the presence of surfactant micelles. Characterization by SANS provides information about the surfactant bilayer and polymer shell thicknesses which were previously unattainable.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution

The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.     

THE EFFECT OF POLYMER ON THE CLOUD POINT OF A SERIES OF TRIBLOCK NONIONIC SURFACTANTS IN AQUEOUS SOLUTION

A series of triblock nonionic surfactants with different Propylene oxide and ethylene oxide chain lengths were synthesized. The triblock nonionic surfactants and poly(ethylene glycols) with different molecular weight were used, to find the effects of polymer chain length and size of the micelles on the cloud point of the surfactants. Two possible models are considered on the basis of cloud point changes of the solutions, to describe the polymer- surfactant interactions. One model suggests that flocculation depletion for the polymer chains exist between two regular micelles. This provides the driving force for the neighboring micelles to approach each other and destabilize the colloidal system. The flocculation effect is more important for polymers with a shorter chain block the approach of the micelles, since there is no typical polymer-surfactant association formed but just simple small molecule associations in which the steric and solvation effects of the polymer chains make the inter-micelles interactions repulsive. The other model considers that intra-chain micelles of polysoap are formed among the surfactant monomers and long polymer chains. The bridging attraction between two intra-chain micelles in such structures can enhance the collisions among the micelles, due to the exchange of amphiphilic monomers among the neighboring micelles.     

Interactions of cationic gemini surfactants with hydrophobically modified poly(acrylamides) studied by fluorescence and microcalorimetry

Steady-state fluorescence, time-resolved fluorescence quenching, and isothermal titration microcalorimetry have been used to study the interactions of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(S)C(12)Br(2), S = 3, 6, and 12) with hydrophobically modified poly(acrylamide) (HMPAM) and unmodified poly(acrylamide) (PAM). Without addition of gemini surfactant, 0.2 wt % HMPAMs except PAM have already self-aggregated into hydrophobic aggregates. Different from single-chain surfactants, C(12)C(S)C(12)Br(2) have stronger interactions with HMPAMs to form surfactant/polymer aggregates, even with PAM. Addition of C(12)C(S)C(12)Br(2) may cause the disruption of HMPAM hydrophobic aggregates and the formation of mixed micelles. It is found that HMPAMs generate lower micropolarity of mixed micelles, larger values of enthalpy of interaction (DeltaH(ps)), and nearly constant values of Gibbs free energy of interaction (DeltaG(ps)). On the other hand, C(12)C(S)C(12)Br(2) with longer spacer brings out slightly lower micropolarity of mixed micelles, owing to the lower electrostatic repulsion between surfactant headgroups. Especially for C(12)C(12)C(12)Br(2), the values of DeltaH(ps) are much more endothermic and the values of DeltaG(ps) are much less negative. The weaker interactions of C(12)C(12)C(12)Br(2) with HMPAMs arise from the marked reduction of attraction between surfactant headgroups and polymer hydrophilic groups induced by its longer spacer.     

New Water‐Soluble Cationic Poly(p‐phenylenevinylene) Derivative: the Interaction with DNA and Selective Fluorescence Enhancement Induced by ssDNA

A new cationic cyano‐substituted poly(p‐phenylenevinylene) (N‐CNPPV) is synthesized by Knoevenagel condensation. The water‐soluble polymer shows different emission spectra in different solvents and displays unique fluorescent behaviors in the mixed solvents of water and THF. The new polymer can form a complex with ssDNA by adopting a more planar conformation, exhibiting red shift of emission wavelength and enhancement of fluorescence intensity. By investigating the fluorescent response of N‐CNPPV to various surfactants, we demonstrate that the hydrophobic interaction and electrostatic interaction result in the selective response of N‐CNPPV to ssDNA. This is the first report on selective fluorescence enhancement of conjugated polyelectrolyte induced by ssDNA.     

Molecular-dynamics simulation of the surface layer of a nonionic micelle

A spherical micelle structure has been studied for cationic (n-dodecyltrimethylammonium chloride) and nonionic (hexaethylene glycol mono-n-hexyl ether) surfactants in pure water and a sodium chloride solution. The molecular-dynamics has been used to simulate the self-assembly of aggregates from an initially homogeneous mixture of water and surfactant molecules and to gain insight into the structure of micelles and their surface layers. The radial distribution functions obtained for charged components have been employed to calculate the local electric potentials of the micelles and the contributions from the charges of water atoms, ions, and a surfactant to it. It has been shown that, similarly to previously studied ionic micelles, in nonionic surfactant micelles, the contributions from water molecules and polar groups (and ions in the case of the salt solution) to the electric potential are mutually compensated in the region of the electrical double layer. Therefore, the resultant electric potential of the surface layer rapidly tends to zero.     

Appearance of pure fluorocarbon micelles surveyed by fluorescence quenching of amphiphilic quinoline derivatives in fluorocarbon and hydrocarbon surfactant mixtures

A halide-sensitive fluorescence probe was utilized to evaluate the miscibility of fluorocarbon and hydrocarbon surfactants in aqueous micellar systems. The fluorescence of 6-methoxy-N-1,1,2,2-tetrahydroheptadecafluorodecylquinolinium chloride, FC10MQ, was quenched by halide ions dissociated from the surfactant. The fluorescence in micellar solutions showed an initially rapid decay. This suggests that halide ions effectively quench FC10MQ fluorescence at the micellar surface. The subsequent slow decay corresponds to the quenching of FC10MQ fluorescence in the aqueous bulk phase by the free counterions. The Stern-Volmer plots for fluorescence quenching gave a distinct break at the critical micelle concentration of the cationic surfactants. The abrupt increase in fluorescence quenching is attributed to the solubilization of the probe in the micelles. The fluorescence quenching behavior provides direct information about the immiscibility of fluorocarbon and hydrocarbon species in micelles, and the results indicate that almost pure fluorocarbon micelles appear in surfactants mixtures.     

SOLUBILIZATION IN MIXED REVERSE MICELLAR SYSTEMS OF AOT/NONIONIC SURFACTANTS/n-HEPTANE

Solubilization of water and aqueous NaCl solutions in mixed reverse micellar systems of anionic surfactant AOT and nonionic surfactants in n-heptane was studied. It was found that the maximum solubilization capacity of water was higher in the presence of certain concentrations of NaCl electrolyte, and these concentrations increased with the increase of nonionic surfactant content and their EO chain length. Soluibilization capacity was enhanced by mixing AOT with nonionic surfactants. The observed phenomena were interpreted in terms of the stability of the interfacial film of reverse micellar microdroplet and the packing parameter of the surfactant that formed mixed reverse micelles.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

ABSORPTION SPECTRA AND ACID-BASE DISSOCIATION OF THE 4-ALKYL DERIVATIVES OF 7-HYDROXYCOUMARIN IN SELF-ASSEMBLED SURFACTANT SOLUTION: COMMENTS ON THEIR USE AS ELECTROSTATIC SURFACE POTENTIAL PROBES

Abstract— The absorption spectra of the un-ionized and ionized forms of 4-heptadecyl-7-hydroxycoumarin (HHC) in aqueous self-assembled surfactant solution have been investigated. From a comparison with the absorption spectra of 7-hydroxycoumarin, 7-hydroxy-4-methylcoumarin (MHC) and HHC in neat organic solvents and organic solvent/water mixtures it is shown that the 7-hydroxycoumarin chromophore of HHC in self-assembled surfactant solution resides, on average, in an interfacial microenvironment which has a lower effective dielectric constant than that of the bulk aqueous solution. The absorption spectrum of the ionized form of HHC in aggregates of self-assembled surfactant molecules with cationic quaternary ammonium headgroups is found to be consistent with there being specific molecular interaction between the anionic chromophore and the quaternary ammonium headgroup. pH titrations performed with MHC in pure water and in four molar aqueous solutions of sodium chloride and tetra-methylammonium chloride indicate that the acid-base dissociation of HHC in charged micelles and vesicles should not be substantially influenced by any interfacial salt-effects, and that the acid-base dissociation of HHC in cationic micelles and vesicles with quaternary ammonium headgroups should not be markedly affected by the specific molecular interaction that exists. Estimates of the electrostatic surface potentials of a number of self-assembled surfactant aggregates are made by utilising the acid-base dissociation of HHC and assuming that the nonionic micelles of n -dodecyl octaoxyethylene glycol monoether (C₁₂E₈) can serve as a reference state of zero surface potential. The validity of this assumption in relation to both micelles and vesicles is discussed in detail.     

Phase behavior of monoglycerol fatty acid esters in nonpolar oils: reverse rodlike micelles at elevated temperatures

We have studied nonaqueous phase behavior and self-assemblies of monoglycerol fatty acid esters having different alkyl chain lengths in different nonpolar oils, namely, liquid paraffin (LP 70), squalane, and squalene. At lower temperatures, oil and solid surfactants do not mix at all compositions of mixing. Upon an increase in the temperature of the surfactant system, the solid melts to give isotropic single or two-liquid phases, depending on the nature of the oil and the surfactant. All monolaurin/oil systems form an isotropic single-phase liquid, but with a decreasing alkyl chain length of surfactant, they become less lipophilic and immiscible in oils. As a result, a two-phase domain is observed in the oil rich region of all monocaprylin/oil systems over a wide range of concentrations. Judging from the phase diagrams, the surfactants are the least miscible with squalane, and the order of miscibility tendency is squalene > LP 70 > squalane. With a further increase of temperature, the solubility of the surfactant in the oil increases, and the two-liquid phase transforms to an isotropic single phase. This phase transformation corresponds to the reverse of the cloud-point phenomenon observed in aqueous nonionic surfactant systems. Small-angle X-ray scattering (SAXS) measurements show the presence of reversed rodlike micelles in the isotropic single phase, and the length of the aggregates decreases with increasing temperature and increasing alkyl chain length of the surfactant. These results indicate a rod-sphere transformation with increasing lipophilicity of the surfactant and confirms the validity of Ninham's penetration model in the reversed system. An addition of a small amount of water dramatically enhances the elongation of the reverse micelles. Increasing the surfactant concentration or changing the oil from squalene to LP 70 also increases the length of the rodlike aggregates.     

Aggregation of perfluoropolyether carboxylic salts in aqueous solutions. Fluorescence probe study

Aqueous solutions of anionic surfactants Cl(C3F6O)nCF2COOX, consisting of n = 2 and 3 perfluoroisopropoxy units and the counterion X = Na+ or NH4+, were studied by the method of fluorescence quenching with the use of (1-pyrenylbutyl)trimethylammonium bromide as a luminophore, and 1,1'-dimethyl-4,4'bipyridinium dichloride (methyl viologen) as a quencher. From the kinetics of fluorescence decay (time-resolved experiments) micellar aggregation numbers, N, and rate constants of the intramicellar quenching were determined for a wide range of surfactant concentrations, on the basis of the model developed by Infelta and Tachiya. The results are discussed in terms of the shape of the aggregates and the degree of counterion binding. The most important conclusions include: (i) a significant increase of N with increasing surfactant concentration suggests that spherical micelles formed at critical micellar concentration (CMC) transform into ellipsoidal aggregates, (ii) the degree of counterion binding to micelles is higher for NH4+ than for Na+, leading to higher N values in the case of the ammonium salt (n = 2), and (iii) at concentrations close to CMC the longer chain surfactant (n = 3) forms loose aggregates suggesting significant permeation with water molecules. An additional finding of this study is that the micelle-bound luminophore and quencher can form a ground-state complex, and for this reason the N values cannot be evaluated properly from the steady-state fluorescence intensity data using the equation proposed by Turro and Yekta.     

表面活性剂对共轭聚合物荧光性质及电荷转移的影响

探讨了表面活性剂存在下, 水溶性阴离子共轭聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](简写为MPS-PPV)的微环境变化对荧光性质及电荷转移的影响. 结果表明, 阳离子表面活性剂及非离子表面活性剂使MPS-PPV荧光增强, 阴离子表面活性剂使其荧光先增强后减弱; 在MPS-PPV/表面活性剂体系中加入电子接受体Pd^2＋, 发现非离子表面活性剂体系的荧光猝灭效率提高, 阴离子及阳离子表面活性剂体系荧光猝灭效率下降. 此研究对研制基于阴离子共聚物的新型生物化学传感器具有一定的指导意义.