Fabrication of high performance Matrimid/polysulfone dual-layer hollow fiber membranes for O2/N2 separation

Matrimid/polysulfone (PSf) dual-layer hollow fiber membranes were fabricated by using co-extrusion and dry-jet wet-spinning phase-inversion techniques. The effects of the spinning dope composition, spinneret dimension, spinneret temperature and the air gap distance on the hollow fiber membranes separation performance were studied. Aging phenomenon was also studied. After coated by 3 wt% silicon solution, the hollow fiber membranes have an O₂/N₂ selectivity of 7.55 at 25 °C, 506.625 kPa which exceeds the intrinsic value of Matrimid. The membranes have an O₂ permeance of 9.36 GPU with an apparent dense-layer thickness of 1421 Å calculated from the O₂ permeability. SEM images show the high porosity underneath the dense skin. It indicates that non-solvent addition is not necessary in the inner spinning dope to induce the macroviod formation. The binodals of the Matrimid/solvent/H₂O and PSf/solvent/H₂O indicate that the composition of the spinning dope plays an important role in the structure and the gas separation performance of the dual-layer hollow fiber membranes. The delayed demixing of the inner spinning dope may fabricate low resistance support layers in the dual-layer hollow fiber membranes.     

Superior gas separation performance of dual-layer hollow fiber membranes with an ultrathin dense-selective layer

A concept demonstration has been made to simultaneously enhance both O₂ and CO₂ gas permeance and O₂/N₂ and CO₂/CH₄ selectivity via intelligently decoupling the effects of elongational and shear rates on dense-selective layer and optimizing spinning conditions in dual-layer hollow fiber fabrication. The dual-layer polyethersulfone hollow fiber membranes developed in this work exhibit an O₂/N₂ selectivity of 6.96 and an O₂ permeance of 4.79 GPU which corresponds to an ultrathin dense-selective layer of 918 Å at room temperature. These hollow fibers also show an impressive CO₂/CH₄ selectivity of 49.8 in the mixed gas system considering the intrinsic value of only 32 for polyethersulfone dense films. To our best knowledge, this is the first time to achieve such a high CO₂/CH₄ selectivity without incorporating any material modification. The above gas separation performance demonstrates that the optimization of dual-layer spinning conditions with balanced elongational and shear rates is an effective approach to produce superior hollow fiber membranes for oxygen enrichment and natural gas separation.     

Dehydration of tetrafluoropropanol (TFP) by pervaporation via novel PBI/BTDA-TDI/MDI co-polyimide (P84) dual-layer hollow fiber membranes

A novel PBI/P84 co-polyimide dual-layer hollow fiber membrane has been specifically fabricated through the dry-jet wet phase inversion process, for the first time, for the dehydration pervaporation of tetrafluoropropanol (TFP). Polybenzimidazole (PBI) was chosen as the outer selective layer because of its superior hydrophilic nature and excellent solvent-resistance together with robust thermal stability, while P84 co-polyimide was employed as the inner supporting layer because of its good solvent-resistance and thermal stability. The PBI/P84 membrane exhibits superior water selectivity and relatively high permeation flux. At 60 °C, the PBI/P84 dual-layer hollow fiber membrane shows a permeation flux of 332 g/(m² h) and a separation factor of 1990 for a feed solution containing of 85 wt% TFP. The preferential water sorption and the significant diffusivity difference between TFP and water are the main causes of high separation factor. However, an increase in feed temperature will greatly increase the permeation flux but seriously decrease the water selectivity. The activation energy data verify that water can preferentially permeate the PBI membrane due to the strong water affinity of PBI and a much smaller molecular size of water.     

Matrimid®5218/PSf双层非对称中空纤维膜的制备及其气体分离性能研究

以商业化聚酰亚胺Matrimid®5218作为功能层材料, 聚砜作为支撑层材料, 采用共挤出法制备双层非对称中空纤维气体分离膜. 所制备的双层非对称中空纤维膜具有致密无缺陷的超薄皮层, 致密皮层厚度约为0.21 μm. 在25 ℃, 0.5 MPa下, CO2/CH4的选择性系数达51.39, CO2的渗透系数为46.29 GPU, O2/N2的选择性系数达到7.13, O2的渗透速率为6.38 GPU. 考察了温度和压力对膜的渗透系数和选择性系数的影响, 并考察了物理老化对膜性能的影响.     

The fabrication of hollow fiber membranes with double-layer mixed-matrix materials for gas separation

The concept of fabricating hollow fibers with double-layer mixed-matrix materials using the same polymeric matrix has been demonstrated for gas separation. Polyethersulfone (PES)–beta zeolite/PES–Al₂O₃ dual-layer mixed-matrix hollow fiber membranes with enhanced separation performance have been fabricated. This study presents an innovative approach of utilizing low cost PES and Al₂O₃ to replace expensive polyimides as the supporting medium for dual-layer mixed-matrix hollow fibers and eliminating interlayer de-lamination problems. The incorporations of 20 wt% beta zeolite in the outer selective layer and 60 wt% Al₂O₃ in the inner layer coupled with spinning at high elongational draw ratios yield membranes with an O₂/N₂ selectivity of 6.89. The presence of Al₂O₃ particles enables the membrane to retain its porous substructure morphology in the course of annealing above the glass transition temperature of PES. Moreover, spinning at high elongational draw ratios results in the re-distribution of Al₂O₃ particles towards both edges of the inner layer. Not only do the permeance and selectivity of the fibers increase, but also greater mechanical properties and lower degree of shrinkages are obtained. Therefore, the combination of PES–beta zeolite and PES–Al₂O₃ nanoparticles with a reasonable draw ratio may be another promising approach to produce hollow fibers with double-layer mixed-matrix materials.     

Fabrication of multi-layer composite hollow fiber membranes for gas separation

Using multilayer composite hollow fiber membranes consisting of a sealing layer (silicone rubber), a selective layer (poly(4-vinylpyridine)), and a support substrate (polysulfone), we have determined the key parameters for fabricating high-performance multilayer hollow fiber composite membranes for gas separation. Surface roughness and surface porosity of the support substrate play two crucial roles in successful membrane fabrication. Substrates with smooth surfaces tend to reduce defects in the selective layer to yield composite membranes of better separation performance. Substrates with a high surface porosity can enhance the permeance of composite membranes. However, SEM micrographs show that, when preparing an asymmetric microporous membrane substrate using a phase-inversion process, the higher the surface porosity, the greater the surface roughness. How to optimize and compromise the effect of both factors with respect to permselectivity is a critical issue for the selection of support substrates to fabricate high-performance multilayer composite membranes. For a highly permeable support substrate, pre-wetting shows no significant improvement in membrane performance. Composite hollow fiber membranes made from a composition of silicone rubber/0.1–0.5 wt% poly(4-vinylpyridine)/25 wt% polysulfone show impressive separation performance. Gas permeances of around 100 GPU for H₂, 40 GPU for CO₂, and 8 GPU for O₂ with selectivities of around 100 for H₂/N₂, 50 for CO₂/CH₄, and 7 for O₂/N₂ were obtained.     

Fabrication of polymer/fluoride-containing salts blend composite membranes for CO2 separation

Poly (N, N-dimethylaminoethyl methacrylate)-poly (ethylene glycol methyl ether methacrylate) (PDMAEMA-PEGMEMA) and cesium fluoride (CsF) were blended and used as the separation material of composite membranes. Hollow fiber composite membranes were fabricated by coating the blend on polysulfone (PSf) hollow fiber substrate. Introduction of fluorine ion improved the separation performance of the membrane. The concentration of coating solution was adjusted to obtain a membrane with high permeance. The composite membrane showed good performance with the CO2 permeance of 30.4 GPU (1 GPU = 10^-6 cm³(STP)/(cm²·s·cmHg)), and selectivities to CO2/N2, CO2/CH4, CO2/H2 and O2/N2 of 47.2, 37.6, 1.75 and 4.70, respectively. Potassium fluoride (KF), due to its low cost, was also used as a substitute of CsF to prepare composite membrane and the permeation data showed that CsF can be replaced by KF. The effect of operating temperature on the permeation properties of the composite membrane was also investigated.     

Halo formation in asymmetric polyetherimide and polybenzimidazole blend hollow fiber membranes

For the first time, we have reported a halo (ring) formation occurred in the cross‐section of integrally skinned asymmetric membranes. These membranes were wet‐spun from solutions containing 30 and 33 wt % of 95/5 and 90/10 polyetherimide (PEI)/polybenzimidazole (PBI). Both Imaging X‐ray Photoelectron Spectroscopy (XPS) and Dynamic Mechanical Analyzer's (DMA) data suggest PEI and PBI form miscible blends the “halo” is not chemically different from the matrix and is most likely a physical phenomenon of unique pore morphology. In other words, uniform porosity was created in the middle of hollow fiber cross‐section area, which performs as a filter for light transmission. We found that the addition of PBI in PEI/DMAc solution not only depresses the macrovoid formation, but also changes the precipitation path: nucleation growth vs. spinodal decomposition. The formation of a halo within a membrane is possibly due to the fact that a uniform nucleation growth occurs in the ring region during the early stage of phase separation because of high solution viscosity and diffusion controlled solvent‐exchange process, and then separation grows in the mechanism of spinodal decomposition from small amplitude composition fluctuations. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1575–1585, 1999     

The effects of spinneret dimension and hollow fiber dimension on gas separation performance of ultra-thin defect-free Torlon hollow fiber membranes

A defect-free as-spun hollow fiber membrane with an ultra-thin dense-selective layer is the most desirable configuration in gas separation because it may potentially eliminate post-treatments such as silicone rubber costing, simplify membrane manufacture, and reduce production costs. However, the formation of defect-free as-spun hollow fiber membranes with an ultra-thin dense-selective layer is an extremely challenging task because of the complexity of phase inversion process during the hollow fiber fabrication and the trade-off between the formation of an ultra-thin dense-selective layer and the generation of defects. We have for the first time successfully produced defect-free as-spun Torlon^® hollow fiber membranes with an ultra-thin dense layer of around 540 Å from only a one polymer/one solvent binary system at reasonable take-up speeds of 10–50 m/min. The best O₂/N₂ permselectivity achieved is much higher than the intrinsic value of Torlon^® dense films. This is also a pioneering work systematically studying the effects of spinneret dimension and hollow fiber dimension on gas separation performance. Several interesting and important phenomena have been discovered and never been reported: (1) as the spinneret dimension increases, a higher elongation draw ratio is required to produce defect-free hollow fiber membranes; (2) the bigger the spinneret dimension, the higher the selectivity; (3) the bigger the spinneret dimension, the thinner the dense-selective layer. Mechanisms to explain the above observation have been elaborated. The keys to produce hollow fiber with enhanced permselectivity are to (1) remove die swell effects, (2) achieve finer monodisperse interstitial chain space at the dense-selective layer by an optimal draw ratio, and (3) control membrane formation by varying spinneret dimension.     

Fabrication of magnesium bentonite hollow fibre ceramic membrane for oil-water separation

In this study, low-cost magnesium bentonite (MB) was used for the fabrication of bentonite hollow fibre (BHF) membrane with high pure water flux. MB powder was initially characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size distribution (PSD) analyser, Brunnauer -Emmett- Teller (BET) method, and field emission scanning electron microscope (FESEM). The BHF membrane obtained was then fabricated through dope suspension mixing, phase inversion and sintering process. The dope suspension was prepared by mixing MB, dispersant, polymer binder, and solvent using a planetary ball mill. While the spinning process was carried out at the extrusion rate of 8 mL/min, a fluid bore rate of 10 mL/min and air gap of 5 cm, and this was followed by sintering operation at 950 °C, 1000 °C, 1050 °C, and 1100 °C. The resulting BHF membrane was characterized by scanning electron microscopy (SEM) and XRD; the porosity test, water flux and oil rejection were also examined. The SEM surface morphology of BHF at sintering temperature of 950 °C showed spongy-like and nested macrovoids structure; the porosity was 49.09% with a mean pore size of 3.9 µm. The performance test on the bentonite-based hollow fibre membrane showed that the membrane prepared at 20 wt% and sintering temperature of 1000 °C, which induced high and stable permeate water flux and oil rejection of BHFC membrane were 544 L/m² h and 97%, respectively. The results have shown that the presence of magnesium in bentonite can enhance and promote the needed support material for the fabrication of hollow fibre ceramic membrane.     

Microscopic behavior of polyvinylpyrrolidone hydrophilizing agents on phase inversion polyethersulfone hollow fiber membranes for hemofiltration

In some biomedical applications, hollow fiber membranes are highly demanded with desirably asymmetric structures, characterized by a dense selective inner skin with which the blood is in contact and supported by porous outer-layer. In this work, such membranes have been successfully prepared by appropriately adjusting membrane manufacturing parameters. Different molecular weights of polyvinylpyrrolidones (PVPs) were used as the hydrophilizing additives for membrane spinning in order to examine their underlying effects on membrane physicochemical properties, morphological structure, solute rejection behavior and hemofiltration performance. Numerous state-of-the-art characterizations on the resultant membranes showed that the hollow fiber membranes spun with the PVP having a molecular weight of 360K as the additive have the most hydrophilic, smooth and highly net negative charged inner surfaces. These membranes also exhibit the best hemofiltration performance in terms of the characteristically least fouling behavior with a normalized flux above 90%, the highest retention of serum albumin for more than 90%, and the best clearance for the simulated β₂-microglobulin toxin in blood waste.     

Solvent-induced morphological change of microporous hollow fiber membranes

Microporous polyethylene hollow fiber membranes (EHF-1 and EHF-2) were subjected to solvent treatment, and the effects of this treatment on membrane morphology and permeating properties were studied. Membranes treated with various organic solvents exhibited enhanced permeability, enlarged pore size, and increased shrinkage in the longitudinal direction. These phenomena were found to depend on the surface tension of the solvent: the higher the surface tension of the solvent, the larger the change in morphology and permeation of the membrane. A mechanism to account for the effects of solvent treatment on the morphology of the membrane is proposed taking into consideration the influence of the type of solvent used for treatment. The enhanced morphological and permeation changes are ascribed to the formation of liquid bridges between two microfibrils of the membrane during drying followed by the deformation and adhesion of the adjacent microfibrils based on the surface tension of the solvent.     

Evaluation of a mathematical model using experimental data and artificial neural network for prediction of gas separation

In recent times, membranes have found wide applications in gas separation processes. As most of the industrial membrane separation units use hollow fiber modules, having a proper model for simulating this type of membrane module is very useful in achieving guidelines for design and characterization of membrane separation units. In this study, a model based on Coker, Freeman, and Fleming＇s study was used for estimating the required membrane area. This model could simulate a multicomponent gas mixture separation by solving the governing differential mass balance equations with numerical methods. Results of the model were validated using some binary and multicomponent experimental data from the literature. Also, the artificial neural network （ANN） technique was applied to predict membrane gas separation behavior and the results of the ANN simulation were compared with the simulation results of the model and the experimental data. Good consistency between these results shows that ANN method can be successfully used for prediction of the separation behavior after suitable training of the network     

Designing aromatic polyamides and polyimides for gas separation membranes

Aromatic polyamides and polyimides with improved gas permselectivity, can be designed and prepared by systematically changing structural elements that affect these properties. Indeed, a conscientious choosing of the chemical changes may still provide a promising approach to get better and better polymers for selective filtration of gases. The results of this work, in which novel monomers have been used, have confirmed that gas permeability through aromatic polyamides and polyimides much higher than that of conventional polyamides and polyimides can be achieved. It has been done by introducing bulky side groups, using non-planar monomers, and combining these elements on both monomers: diamines and dianhydrides or diamines and diacids. A theoretical study has also been made to explain the behaviour of some individual polymers, comparing experimental and calculated values of density and free volume.     

ZIF-8 based polysulfone hollow fiber membranes for natural gas purification

Mixed matrix membranes (MMMs) have received worldwide attention for natural gas purification due to their superior performance in terms of permeability and selectivity. The zeolitic imidazole framework-8 (ZIF-8) blended polysulfone (PSf) membranes have been fabricated for natural gas purification. ZIF-8 was selected due to its low cost, remarkable thermal and chemical stabilities, and tunable microporous structure. The neat PSf hollow fiber membrane and mixed matrix hollow fiber membranes incorporated with the various ZIF-8 loadings up to 1.25% were fabricated. The prepared membranes were evaluated using field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and gas separation performance. The low loading of ZIF-8 nanoparticles to the MMM improved thermal stability and glass transition temperature and yielded low surface roughness. MMMs were tested using pure gases with a significant improvement of 36% in CO₂ permeability and 28% in CO₂/CH₄ selectivity compared to the neat membrane. However, the high ZIF-8 loading reduced the separation performances. Moreover, CO₂/CH₄ selectivity decreased at elevated pressure (8 and 10 bar) due to CO₂-induced plasticization. Previously, the incorporation of ZIF-8 particles has primarily been subjected to the fabrication of flat sheet membranes, whereas this work focused on hollow fiber membranes which are rarely investigated. Hence, the promising results obtained at low feed pressure in this study demonstrated the potential of ZIF-8 based hollow fiber membrane for natural gas purification.     

New amorphous perfluoro polymers: perfluorodioxolane polymers for use as plastic optical fibers and gas separation membranes

To address the need for perfluoro polymers with higher T_g, we have prepared and characterized various perfluorodioxolane monomers via direct fluorination of the hydrocarbon precursors. These monomers were readily polymerized in bulk or in solution initiated by perfluorodibenzoyl peroxide. The polymers obtained have relatively high T_g(~160°C) and exhibited low material dispersion. These polymers are completely amorphous and soluble in fluorinated solvents. The polymers are also chemically and thermally stable (T_g > 300°C). Thus, these perfluorodioxolane polymers may be used as plastic optical fiber material where high T_g is required, such as in automobile and aircraft application. These perfluorodioxolane polymers were also investigated for use as gas separation membrane. Among these polymers, the copolymer of perfluoro (2‐methylene‐1,3‐dioxolane) and perfluoro (2‐methylene‐4,5‐dimethyl dioxolane) showed superior gas separation performance compared with the commercial perfluoro polymers for a number of gas pair, including CO₂/CH₄, H_e/CH₄, H₂/CH₄, and N₂/CH₄. Copyright © 2015 John Wiley & Sons, Ltd.     

Composite hollow fiber membranes for gas separation: the resistance model approach

A model is developed to explain the behavior of composite gas separation membranes which consist of a porous asymmetric substrate of one polymer, and a coating of a second polymer. An analogy between gas permeation and electrical flow is made, and the various portions of the composite membrane are described in terms of their resistance to gas permeation. It is shown that substrate porosity can vary significantly without altering the separating properties of such a composite, and that substrate and coating properties can be matched to optimize the flux and separation factor. Several major problems previously associated with the development of useful hollow fibers for gas separation are discussed, and it is shown that the use of Resistance Model composites can help to resolve these problems.     

Modification of polysulfone hollow fiber ultrafiltration membranes using hyperbranched polyesters with different molecular weights

A series of hyperbranched polyesters (HBPEs) using trimethylolpropane (TMP) as a core were synthesized via an esterification reaction, and the molecular weights of these HBPEs were 1600, 2260, 3370, and 5170 g/mol, respectively. Then, these HBPEs were added into dope solutions to prepare PSf hollow fiber membranes via a wet‐spinning method. When the HBPE molecule weight increased from 1600 to 5170 g/mol, the initial viscosities of the PSf–HBPE–PEG400–DMAc dope solutions increased, and the shear‐thinning phenomenon of these dope solutions became increasingly obvious. When these dope solutions were immersed into the deionized water, the demixing rate increased with an increase in the HBPE molecule weight at first and then decreased; this results in the increase of membrane porosity and the coexistence of finger‐like and sponge‐like structures. With the addition of HBPE, the start pure water contact angle and the mean effective pore size of the membranes decreased, and the J_w increased. For the mechanical properties of the membranes, the breaking strength and the elongation of the membranes also increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Automated polyvinylidene difluoride hollow fiber liquid-phase microextraction of flunitrazepam in plasma and urine samples for gas chromatography/tandem mass spectrometry

A new polyvinylidene difluoride (PVDF) hollow fiber (200 μm wall thickness, 1.2 mm internal diameter, 0.2 μm pore size) was compared with two other polypropylene (PP) hollow fibers (200, 300 μm wall thickness, 1.2 mm internal diameter, 0.2 μm pore size) in the automated hollow fiber liquid-phase microextraction (HF-LPME) of flunitrazepam (FLNZ) in biological samples. With higher porosity and better solvent compatibility, the PVDF hollow fiber showed advantages with faster extraction efficiency and operational accuracy. Parameters of the CTC autosampler program for HF-LPME in plasma and urine samples were carefully investigated to ensure accuracy and reproducibility. Several parameters influencing the efficiency of HF-LPME of FLNZ in plasma and urine samples were optimized, including type of porous hollow fiber, organic solvent, agitation rate, extraction time, salt concentration, organic modifier, and pH. Under optimal conditions, extraction recoveries of FLNZ in plasma and urine samples were 6.5% and 83.5%, respectively, corresponding to the enrichment factor of 13 in plasma matrix and 167 in urine matrix. Excellent sample clean-up was observed and good linearities (r² = 0.9979 for plasma sample and 0.9995 for urine sample) were obtained in the range of 0.1–1000 ng/mL (plasma sample) and 0.01–1000 ng/mL (urine sample). The limits of detection (S/N = 3) were 0.025 ng/mL in plasma matrix and 0.001 ng/mL in urine matrix by gas chromatography/mass spectrometry/mass spectrometry.     

The physical aging phenomenon of 6FDA‐durene polyimide hollow fiber membranes

The aging phenomenon of asymmetric 6FDA‐durene polyimide hollow fibers spun with different shear rates for gas separation has been investigated. The permeances and selectivities of different gases, such as H₂, O₂, N₂, CH_4, and CO₂, were experimentally determined as a function of time for around five months at room temperature. It was found that the gas permeation fluxes of the uncoated and silicone rubber‐coated hollow fibers decreased significantly during the first 30 days following fabrication and then slightly deteriorated thereafter. In the early stage of aging, because of different molecular orientations and skin morphologies induced by shear rates, the percentage of permeance drop for uncoated fibers increased with increasing shear rates, then decreased with increasing shear rates. The permeance of 6FDA‐durene hollow fibers coated with silicone rubber dropped more significantly than the uncoated fibers, implying that silicone rubber coating did affect the aging behavior. This might be due to the fact that silicone rubber layer hindered the molecular relaxation and tightened interface molecules between the dense selective layer and silicone rubber, thus the selectivity increased with aging. Thermal analysis data suggest two processes occurring simultaneously during the aging: one is the relaxation of shear oriented chains, and the other is the densification of chain packing through the reduction of interstitial space among chains. The former has been confirmed by an increase in CTE, while the latter was confirmed by an increase in the peak of β‐relaxation temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 765–775, 2000