Synthesis and characterization of the Pd/InVO4-TiO2 co-doped thin films with visible light photocatalytic activities

Novel Pd/InVO₄-TiO₂ thin films with visible light photocatalytic activity were synthesized from the Pd and InVO₂ co-doped TiO₂ sol via sol-gel method. The photocatalytic activities of Pd/InVO₄-TiO₂ thin films were investigated based on the oxidative decomposition of methyl orange in aqueous solution. The as-prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy (UV-vis). The results indicate that the Pd/InVO₄-TiO₂ thin films are compact, uniform and consist of sphere nanoparticles with diameters about 80-100 nm. The UV-vis spectra show that the Pd/InVO₄-TiO₂ thin films extend the light absorption spectrum toward the visible region. XPS results reveal that doped Pd exist in the form of metallic palladium. The photocatalytic experiments demonstrate that Pd doping can effectively enhance the photocatalytic activities of InVO₄-TiO₂ thin films in decomposition of aqueous methyl orange under visible light irradiation. It has been confirmed that Pd/InVO₄-TiO₂ thin films could be excited by visible light (E < 3.2 eV) due to the existence of the Pd and InVO₄ doped in the films.     

Sonodegradation and photodegradation of methyl orange by InVO4/TiO2 nanojunction composites under ultrasonic and visible light irradiation

The InVO₄/TiO₂ nanojunction composites with different weight ratio of 1:10, 1:25, 1:50 and 1:100 were successfully constructed using an ion impregnate method, followed by calcining temperature 400 °C for 2 h in Ar. The sono- and photo-catalytic activities of the InVO₄/TiO₂ nanojunction composites were evaluated through the degradation of methyl orange (MO) in aqueous solution under ultrasonic and visible light irradiation, respectively. The experimental results determined that the (1:50) InVO₄/TiO₂ nanojunction composite has exhibited the highest sonocatalytic activity. It can be ascribed to vectorial charge transfer at the co-excited InVO₄/TiO₂ interface under ultrasonic irradiation, results in the complete separation of electrons and holes. Interestingly, the (1:25) InVO₄/TiO₂ nanojunction composite displayed superior photocatalytic activity for MO degradation under visible light, indicating that InVO₄ as a narrow band gap sensitizer can expand photocatalytic activity of TiO₂ to visible region, and the charge transfer can be formed from high energy level of InVO₄ conduction band to the low energy level of TiO₂ conduction band in a present of excited InVO₄ alone under visible light irradiation. The sono- and photo-catalytic activities of the InVO₄/TiO₂ nanojunction composites were found to be dependent significantly on different InVO₄ contents, which can be explained by the influence of charge transfer on the basis of the work functions of different catalysis mechanism.     

Design and fabrication of a TiO2/nano-silicon composite visible light photocatalyst

Nano-silicon (nc-Si) was utilized as the charges generator to promote the photocatalytic and super-hydrophilic reactivity of TiO₂ film under visible light irradiation. The photocatalytic ability of TiO₂/nc-Si composite photocatalyst was evaluated by a set of experiments to photodecompose 100 ppm methylene blue (MB) in aqueous solution. And the super-hydrophilic property was characterized by measuring the water droplet contacts angle, under visible light irradiation in atmospheric air and at room temperature. Under 100 mW/cm² visible light irradiation, the droplet contact angles were reduced to 0° within 4 h with nc-Si charge generator. Additionally, the rate constant of MB photo-degradation was promoted 6.6 times.     

Hydrothermal synthesis and photoelectric properties of BiVO4 with different morphologies: An efficient visible-light photocatalyst

Different morphologies of monoclinic BiVO₄ with smaller size were hydrothermal synthesized by simply adjusting the amount of surfactant (polyvinyl pyrrolidone PVP K30) added. The detailed field emission scanning electron microscope (FESEM) analysis revealed that the amount of PVP added could significantly affect the morphology and size of BiVO₄. Their photocatalytic activities were evaluated by the decolorization of methylene blue (MB) aqueous solution under visible-light irradiation (λ > 400 nm), and the as-prepared sample with well-assembled flower-like morphology showed a much higher photocatalytic activity due to larger specific surface area and higher separation efficiency of photo-induced carriers. The relationship between the behavior of photo-induced carriers and photocatalytic activity was studied using the surface photovoltage spectroscopy (SPS) and corresponding phase spectra.     

Aerosol-assisted flow synthesis of WxTi1−xO2 solid solution spheres with enhanced photocatalytic activity

In this paper, W_xTi_1−xO₂ solid solutions (x = 0.000, 0.005, 0.010, 0.015, and 0.020) microspheres were synthesized with an aerosol-assisted flow synthesis method. The resulting samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption, UV-vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the as-prepared catalysts were measured by the degradation of rhodamine B (RhB) under visible light irradiation (λ ≥ 420 nm). All the solid solutions exhibited higher photocatalytic activities than pure TiO₂ and the W_0.015Ti_0.985O₂ solid solution possessed the highest photocatalytic activity. The degradation constant of RhB on W_0.015Ti_0.985O₂ solid solution catalyst was about 15 times of that of the pure TiO₂ and 25 times of that of Degussa P25, respectively. This study provides an effective method to prepare visible light photocatalysts on a large scale.     

Efficient visible-light-induced photocatalytic degradation of MO on the Cr-nanocrystalline titania-S

In order to improve visible light photocatalytic activities of the nanometer TiO₂, a novel and efficient Cr,S-codoped TiO₂ (Cr-TiO₂-S) photocatalyst was prepared by precipitation-doping method. The crystalline structure, morphology, particle size, and chemical structure of Cr-TiO₂-S were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) techniques, respectively. Results indicate that the doping of Cr and S, cause absorption edge shifts to the visible light region (λ > 420 nm) compare to the pure TiO₂, reduces average size of the TiO₂ crystallites, enhances desired lattice distortion of Ti, promotes separation of photo-induced electron and hole pair, and thus improves pollutant decomposition under visible light irradiation. The photocatalytic activities of Cr-TiO₂-S nanoparticles were evaluated using the photodegradation of methyl orange (MO) as probe reaction under the irradiation of UV and visible light and it was observed that the Cr-TiO₂-S photocatalyst shows higher visible photocatalytic activity than the pure TiO₂. The optimal Cr-TiO₂-S concentration to obtain the highest photocatalytic activity was 5 mol% for both of Cr and S.     

Synthesis, characterization and photocatalytic activities of rare earth-loaded BiVO4 catalysts

The BiVO₄-based photocatalysts loaded with rare earth (RE=Ho, Sm, Yb, Eu, Gd, Nd, Ce and La) were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), nitrogen adsorption for the BET specific surface area and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were evaluated by decolorization of methylene blue (MB) under visible light irradiation. The results of XRD, SEM and XPS analysis deduced that the rare earth ions were present as RE₂O₃ in the samples. The DRS analysis showed the shift in the absorbption edge from the UV to the visible range: Ho³⁺-BiVO₄ < Sm³⁺-BiVO₄ < Yb³⁺-BiVO₄ < Eu³⁺-BiVO₄ < Gd³⁺-BiVO₄ < Nd³⁺-BiVO₄ < La³⁺-BiVO₄ < Ce³⁺-BiVO₄ < BiVO_4. Gd³⁺-BiVO₄ had the highest photocatalytic activity among all the RE³⁺-BiVO₄ catalysts. The optimal Gd content was 8 at% under visible light irradiation. This beneficial effect was attributed to the specific electron structure characteristics of gadolinium and the increasing in the separation efficiency of the electron-hole pairs. On the contrast, the other rare earth ions had the detrimental effect on the photocatalytic decolorization of MB.     

Efficient one-pot synthesis of Ag nanoparticles loaded on N-doped multiphase TiO2 hollow nanorod arrays with enhanced photocatalytic activity

The simultaneous Ag loaded and N-doped TiO₂ hollow nanorod arrays with various contents of silver (Ag/N-THNAs) were successfully synthesized on glass substrates by one-pot liquid phase deposition (LPD) method using ZnO nanorod arrays as template. The catalysts were characterized by Raman spectrum, field-emission scanning electron microscopy (FESEM), high-resolution transmission electron microscope (HRTEM), ultraviolet-vis (UV-vis) absorption spectrum and X-ray photoelectron spectroscopy (XPS). The results suggest that AgNO₃ additive in the precursor solutions not only can promote the anatase-to-rutile phase transition, but also influence the amount of N doping in the samples. The photocatalytic activity of all the samples was evaluated by photodegradation of methylene blue (MB) in aqueous solution. The sample exhibited the highest photocatalytic activity under UV light illumination when the AgNO₃ concentration in the precursor solution was 0.03 M, due to Ag nanoparticles acting as electron sinks; When the AgNO₃ concentration was 0.07 M, the sample performed best under visible light illumination, attributed to the synergetic effects of Ag loading, N doping, and the multiphase structure (anatase/rutile).     

Low temperature synthesis of iodine-doped TiO2 nanocrystallites with enhanced visible-induced photocatalytic activity

Iodine-doped TiO₂ nanocrystallites (denoted as I-TNCs) were prepared via a newly developed triblock copolymer-mediated sol-gel method at a temperature of 393 K. I-doping, crystallization and the formation of porous structure have been simultaneously achieved. The obtained particles were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and UV-vis spectrophotometer. The results indicated that the as-prepared I-TNCs possessed a diameter of ca. 5 nm with anatase crystalline structure and a specific surface area of over 200 m² g⁻¹. The presence of iodine expanded the photoresponse in visible light range, and led to enrich in surface hydroxyl group on the TiO₂ surface. Compared with the commercial photocatalyst P25, the I-TNCs significantly enhanced the photocatalytic efficiency in the degradation of rhodamine B and 2,4-dichlorophenol, and the I-TNCs with 2.5 mol% doping ratio exhibited the best photocatalytic activity.     

Sputter deposition of high transparent TiO2−xNx/TiO2/ZnO layers on glass for development of photocatalytic self-cleaning application

In this study, TiO_2−xN_x/TiO₂ double layers thin film was deposited on ZnO (80 nm thickness)/soda-lime glass substrate by a dc reactive magnetron sputtering. The TiO₂ film was deposited under different total gas pressures of 1 Pa, 2 Pa, and 4 Pa with constant oxygen flow rate of 0.8 sccm. Then, the deposition was continued with various nitrogen flow rates of 0.4, 0.8, and 1.2 sccm in constant total gas pressure of 4 Pa. Post annealing was performed on as-deposited films at various annealing temperatures of 400, 500, and 600 °C in air atmosphere to achieve films crystallinity. The structure and morphology of deposited films were evaluated by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM). The chemical composition of top layer doped by nitrogen was evaluated by X-ray photoelectron spectroscopy (XPS). Photocatalytic activity of samples was measured by degradation of Methylene Blue (MB) dye. The optical transmittance of the multilayer film was also measured using ultraviolet-visible light (UV-vis) spectrophotometer. The results showed that by nitrogen doping of a fraction (∼1/5) of TiO₂ film thickness, the optical transmittance of TiO_2−xN_x/TiO₂ film was compared with TiO₂ thin film. Deposited films showed also good photocatalytic and hydrophilicity activity at visible light.     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with lanthanum and iodine

The novel visible-light-activated La/I/TiO₂ nanocomposition photocatalyst was successfully synthesized using precipitation-dipping method, and characterized by X-ray powder diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), thermogravimetry-differential scanning calorimetry (TG-DSC) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity of La/I/TiO₂ was evaluated by studying photodegradation of reactive blue 19 as a probe reaction under simulated sunlight irradiation. Photocatalytic experiment results showed that the maximum specific photocatalytic activity of the La/I/TiO₂ photocatalyst appeared when the molar ratio of La/Ti was 2.0 at%, calcined at 350 °C for 2 h, due to the sample with good crystallization, high BET surface area and small crystal size. Under simulated sunlight irradiation, the degradation of reactive blue 19 aqueous solution reached 98.6% in 80 min, which showed La/I/TiO₂ photocatalyst to be much higher photocatalytic activity compared to standard Degussa P25 photocatalyst. The higher visible light activity is due to the codoping of lanthanum and iodine.     

Preparation and visible light photocatalytic activity of mesoporous N, S-codoped TiO2(B) nanobelts

The mesoporous N, S-codoped TiO₂(B) nanobelts are synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption measurements (BET), X-ray photoelectron spectra (XPS), and UV-vis diffuse reflectance spectra (DRS). The results show that the prepared samples are mesoporous structured and exhibit stronger absorption in the visible light region with red shift in the absorption edge. The photocatalytic activity of N, S-codoped mesoporous TiO₂(B) nanobelts is evaluated by the photocatalytic photodegradation of potassium ethyl xanthate (KEX) under visible light irradiation. It is found that the photocatalytic activity of the prepared samples increases with increasing the molar ratio of thiourea to Ti (R). At R = 3, the photocatalytic activity of the N, S-codoped TiO₂(B) sample TBLTS-3 reaches a maximum value. With further increasing R, the photocatalytic activity of the sample decreases. The high photocatalytic activity of N, S-codoped TiO₂(B) nanobelts can be attributed to the balance between strong absorption in visible light region and low recombination rate of electron/hole pairs.     

Intricate photocatalytic decomposition behavior of gaseous methanol with nanocrystalline tungsten trioxide films in high vacuum

Gas phase photocatalytic decomposition of methanol with nanocrystalline tungsten trioxide (WO₃) thin films in high vacuum was investigated. WO₃ thin films were prepared from a novel precursor prepared using peroxo-tungstic acid and polyethylene glycol (PEG300) in water. Uniform thin films of WO₃ with different morphologies such as micro-sheets, platelets, nanorods and nanoparticles were fabricated by varying the concentration of PEG300 in the precursor solution and by optimizing other preparative parameters. Nanocrystalline thin films were obtained with 20% of PEG300 in the precursor solution and at a calcination temperature of 350 °C, followed by post annealing in air at 500 °C. Photocatalytic decomposition of gaseous methanol in high vacuum was examined with nanocrystalline WO₃ thin films using a quadrupole mass spectrometer at a real-time scale under visible (400-700 nm) and UVA (300-400 nm) illumination. Methanol was first decomposed to formaldehyde via direct hole transfer mechanism. Subsequently formaldehyde was decomposed to CO and finally to CO₂. As a result, the partial pressures of CH₂O, CO and CO₂ showed a switching phenomenon according to the ON/OFF of light illumination. A rapid decrease in the photocatalytic activity was observed due to photo-induced desorption of methanol during the initial light pulse and gradual decrease at longer times was observed because of formation of tungsten bronze. Thus, the overall process of methanol decomposition over WO₃ films is complex convolution of elementary steps that involve several intermediates.     

Synthesis and characterization of silver/lithium cobalt oxide (Ag/LiCoO2) nanofibers via sol–gel electrospinning

We report on the preparation and characterization of Ag/LiCoO₂ nanofibers (NFs) via the sol–gel electrospinning (ES) technique. Ag nanoparticles (NPs) were produced in an aqueous polyvinyl pyrrolidone (PVP) solution by using AgNO₃ precursor. A viscous lithium acetate/cobalt acetate/polyvinylalcohol/water (LiAc/(CoAc)₂/PVA/water) solution was prepared separately. A Ag NPs/PVP/water solution was prepared and added to this viscous solution and magnetically stirred to obtain the final homogeneous electrospinning solution. After establishing the proper electrospinning conditions, as-spun precursor Ag/LiAc/Co(Ac)₂/PVA/PVP NFs were formed and calcined in air at a temperature of 600 °C for 3 h to form well-crystallized porous Ag/LiCoO₂ NFs. Various analytical characterization techniques such as UV–vis, SEM, TEM, TGA, XRD, and XPS were performed to analyze Ag NPs, as-spun and calcined NFs. It was established that Ag NPs in the precursor Ag/LiAc/Co(Ac)₂/PVA/PVP NFs are highly self-aligned as a result of the behavior of Ag in the electric field of the electrospinning setup and the interaction of Ag ions with Li and Co ions in the NF. Ag/LiCoO₂ NFs exhibit a nanoporous structure compared with un-doped LiCoO₂ NFs because the atomic radius of Ag is larger than the radius of Co and Li ion; thus, no substitution between Ag and Li or Ag and Co atoms occurs, and Ag NPs are located at the interlayer of LiCoO₂ while some are left in the fiber.     

Preparation and characterization of visible light responsive Fe2O3-TiO2 composites

In this study we present the effects of iron oxide (Fe₂O₃) on titanium dioxide (TiO₂) in synthesising visible-light reactive photocatalysts. A Fe₂O₃-TiO₂ composite photocatalyst was synthesized from Fe₂(SO₄)₃ and Ti(SO₄)₂ by a ethanol-assisted hydrothermal method. The preparation conditions were optimized through the investigation of the effects of hydrothermal temperature and time as well as molar ratio of Ti to Fe on the photocatalytic activity. The visual, physical and chemical properties of the Fe₂O₃-TiO₂ composites were investigated. The results showed that α-Fe₂O₃ and anatase TiO₂ were present in the composites. The Fe₂O₃-TiO₂ synthesized under optimum condition consisted of mesoporous structure with an average pore size of 4 nm and a surface area of 43 m²/g. Under visible and solar light irradiation, the photocatalytic activity of optimized sample was significantly higher than that of pure TiO₂. This sample led to a photodegradation efficiency of 90% and 40% of auramine under visible light and solar light, respectively.     

Direct micropatterning of high dielectric BaTiO3 films by laser-induced pyrolysis with a nano-crystalline seeding technique

A direct patterning method of dielectric BaTiO₃ (BT) films is proposed, which applies laser-induced pyrolysis in combination with nano-crystalline seeding technique. A precursor solution of a BT complex alkoxide containing BT nano-crystalline particles with polyvinylpyrollidone (PVP) as dispersion stabilizer was spin-coated on Pt substrate. An Ar⁺ laser beam was focused and scanned on spin-coated BT films, which induced pyrolysis and crystallization of the films with spatial selectivity. Micropatterns were obtained by striping laser-unirradiated regions on the films with HCl aqueous solution. Raman spectra of the micropattern confirmed that the structures were tetragonal crystalline BT. Clear micropatterns with a line width of ca. 3 μm and an interval of 5 μm were formed at PVP concentrations of 25 and 50 kg/m³. The dielectric constant and dissipation factor of the film fabricated at a laser energy density of 27 MW/cm² and a scanning speed of 25 μm/s attained 76.2 and 0.07, respectively, for a measurement frequency of 100 kHz.     

Synthesis and photocatalytic property of N-doped TiO2 nanorods and nanotubes with high nitrogen content

Nano N-doped TiO₂ nanotubes were fabricated by hydrothermally treating N-doped TiO₂ nanorods in a 8 M NaOH solution at 110 °C for 20 h. The N-doped TiO₂ nanorods were synthesized by a solvothermal process with precursor solution containing titanium sulfate, urea, and dichloroethane. The N-doped TiO₂ nanorods and nanotubes were characterized with X-ray diffraction, transmission electron microscopy, and UV-vis spectrophotometry. The nitrogen contents of the N-doped TiO₂ nanorods and nanotubes were reached to high values of 36.9 at.% and 25.7 at.%, respectively. The nitrogen doping narrowed the band gap of the N-doped TiO₂ nanorods and nanotubes and introduced indirect band gap to the powders, which respectively extended the absorption edge to visible light and infrared region. The nanotubes showed larger specific surface area and greater degradation efficiency to methyl orange than the nanorods.     

Study on the photocatalytic activity of K2La2Ti3O10 doped with zinc(Zn)

The layered perovskite type oxides, K₂La₂Ti₃O₁₀ and zinc(Zn)-doped K₂La₂Ti₃O₁₀ were prepared by sol-gel method and were characterized by power X-ray diffraction, UV-vis diffuse reflectance and X-ray photoelectron spectroscopy. The photocatalytic activity for water splitting of the catalyst powders was investigated with I⁻ as electron donor under ultraviolet and visible light irradiation respectively. The electronic structure of the powders has been analyzed by the first principles calculation, which reveals the photo responses in the visible region and the improvement of the photocatalytic activity of K₂La₂Ti₃O₁₀. Conclusions were made that zinc(Zn)-doped K₂La₂Ti₃O₁₀ exhibited higher reactivity for hydrogen production. When I⁻ was used as electron donor, the optimum doping concentration of zinc(Zn) was found to be 0.015:1 (n_Zn:n_Ti). The average hydrogen production rates were 126.6 μmol/(gcat h) under ultraviolet irradiation and 55.5 μmol/(gcat h) under visible light irradiation which were raised by 131% and 251% compared with undoped K₂La₂Ti₃O₁₀ photocatalyst, respectively.     

TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

TiO₂ thick films deposited on macroporous reticulated Al₂O₃ foams with pore size of 10 ppi and 15 ppi were prepared using dip coating from slurries of Aeroxide^® P25 nanopowder and precipitated titania. All prepared films have sufficiently good adhesion to the surface of the substrate also in case of strongly cracked films. No measurable release of deposited TiO₂ after repeated photocatalytic cycles was observed. The photocatalytic activity was characterized as the rate of mineralization of aqueous phenol solution under irradiation of UVA light by TOC technique. The best activity was obtained with Aeroxide^® P25 coated Al₂O₃ foam with the pore size of 10 ppi, annealed at 600 °C. The optimal annealing temperature for preparation of films from precipitated titania could be determined at 700 °C. Films prepared by sol-gel deposition technique were considerably thinner compared to coatings made of suspensions and their photocatalytic activity was significantly smaller.     

Structure, electrochromic and optical properties of WO3 film prepared by dip coating-pyrolysis

The tungsten oxide (WO₃) film was grown by dip coating-pyrolysis method with the PEG-400 as the structure-directing agent. Microstructure of the WO₃ film was characterized by TG-DSC, XRD and SEM techniques. It was found that the film annealed at 350 °C for 2 h comprised cubic WO₃ and orthorhombic WO₃. The measurements of the cyclic voltammetry (CV) and UV-vis spectrum suggested that the WO₃ film had a good electrochromic reversibility performance. The film possessed excellent modulation to the visible light and the maximal average transmittance modulation reached 70.06%.