Development of fluorescent FeIII sensor based on chalcone

In this paper, 4-dimethylamino 2,5-dihydroxy chalcone (DMADHC), which exhibits excited state intramolecular charge transfer (ICT) characteristics, was synthesized and characterized. A sensitive optochemical sensor for Fe³⁺ ion was developed using DMADHC as fluorescence receptor. The fluorescence of DMADHC was gradually quenched with the addition of Fe³⁺ ion, which attributed to the formation of 1:1 complex between DMADHC and Fe³⁺ ion. The sensor exhibited excellent selectivity for Fe³⁺ ion over a large number of cation ions such as alkali, alkaline earth and transitional metal ions with a linear range of 3.984×10⁻⁷-1.135×10⁻⁵ and a limit of detection of 8.223×10⁻⁸ mol/L. On this basis, the sensor was preliminary applied to the determination of the content of iron ions in multi-vitamin tablet with satisfied results and the recoveries were in the 95-100% interval, and precision (n=5) was better than 5%.     

Luminescence studies on swift heavy ion irradiated nanocrystalline aluminum oxide

Pellets of nanocrystalline aluminum oxide synthesized by a combustion technique are irradiated with 120 MeV Au⁹⁺ ions for fluence in the range 5×10¹¹-1×10¹³ ions cm⁻². Two photoluminescence (PL) emissions, a prominent one with peak at ∼525 nm and a shoulder at ∼465 nm are observed in heat treated and Au⁹⁺ ion irradiated aluminum oxide. The 525 nm emission is attributed to F₂²⁺-centers. The PL intensity at 525 nm is found to increase with increase in ion fluence up to 1×10¹² ions cm⁻² and decreases beyond this fluence. Thermoluminescence (TL) of heat-treated and swift heavy ion (SHI) irradiated aluminum oxide gives a strong and broad TL glow with peak at ∼610 K along with a weak shoulder at 500 K. The TL intensity is found to increase with Au⁹⁺ ion fluence up to 1×10¹³ ions cm⁻² and decreases beyond this fluence.     

Studies on the origins of the absorption spectra in PbWO4 crystal

The electronic structures and absorption spectra for both the perfect PbWO₄ (PWO) crystal and the three types of PWO crystals, containing V_Pb²⁻, V_O²⁺ and a pair of V_Pb²⁻-V_O²⁺, respectively, have been calculated using CASTEP codes with the lattice structure optimized. The calculated absorption spectra indicate that the perfect PWO crystal does not occur absorption band in the visible and near-ultraviolet region. The absorption spectra of the PWO crystal containing V_Pb²⁻ exhibit seven peaks located at 1.72 eV (720 nm), 2.16 eV (570 nm), 2.81 eV (440 nm), 3.01 eV (410 nm), 3.36 eV (365 nm), 3.70 eV (335 nm) and 4.0 eV (310 nm), respectively. The absorption spectra of the PWO crystal containing V_O²⁺ occur two peaks located at 370 nm and 420 nm. The PWO crystal containing a pair of V_Pb²⁻-V_O²⁺ does not occur absorption band in the visible and near-ultraviolet region. This leads to the conclusions that the 370 and 420 nm absorption bands are related to the existence of both V_Pb²⁻ and V_O²⁺ in the PWO crystal and the other absorption bands are related to the existence of the V_Pb²⁻ in the PWO crystal. The existence of the pair of V_Pb²⁻-V_O²⁺ has no visible effects on the optical properties. The calculated polarized optical properties are well consistent with the experimental results.     

Optical properties of Er/Yb-codoped transparent PLZT ceramic

Optical absorption and emission spectra of Er³⁺/Yb³⁺ ions in PLZT (Pb_1−xLa_xZr_yTi_1−yO₃) ceramic have been studied. Based on the Judd—Ofelt (J-O) theory, the J-O intensity parameters were calculated to be Ω₂=2.021×10⁻²⁰ cm², Ω₄=0.423×10⁻²⁰ cm², Ω₆=0.051×10⁻²⁰ cm² from the absorption spectrum of Er³⁺/Yb³⁺-codoped PLZT. The J-O intensity parameters have been used to calculate the radiative lifetimes and the branching ratios for some excited ⁴I_13/2, ⁴I_11/2, ⁴I_9/2⁴F_9/2, and ⁴S_3/2 levels of Er³⁺ ion. The stimulated emission cross-section (8.24×10⁻²¹ cm²) was evaluated for the ⁴I_13/2→⁴I_15/2 transition of Er³⁺. The upconversion emissions at 538, 564, and 666 nm have been observed in Er³⁺/Yb³⁺-codoped PLZT by exciting at 980 nm, and their origins were identified and analyzed.     

Spectrofluorimetric determination of trace amount of coenzyme II using ciprofloxacin-terbium complex as a fluorescent probe

A new spectrofluorimetric method was developed for the determination of trace amount of nicotinamide adenine dinucleotide phosphate (NADP). Using terbium ion (Tb³⁺)-ciprofloxacin (CIP) complex as a fluorescent probe, in the buffer solution of pH=9.00, NADP can remarkably enhance the fluorescence intensity of the Tb³⁺-CIP complex at and the enhanced fluorescence intensity of Tb³⁺ ion is in proportion to the concentration of NADP. Optimum conditions for the determination of NADP were also investigated. The dynamic range for the determination of NADP is 4.9×10⁻⁷−3.7×10⁻⁶ mol L⁻¹ with detection limit of 1.3×10⁻⁷ mol L⁻¹. This method is simple, practical and relatively free interference from coexisting substances and can be successfully applied to determination of NADP in synthetic water samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the Tb³⁺-CIP system and the Tb³⁺-CIP-NADP system have been also discussed.     

CdSe quantum dots decorated by mercaptosuccinic acid as fluorescence probe for Cu

Water-soluble CdSe quantum dots (QDs) were synthesized using mercaptosuccinic acid (MSA) as a stabilizer. The growth process and characterization of CdSe quantum dots were determined by transmission electron microscopy (TEM), X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, Ultraviolet-visible (UV-vis) spectroscopy, and Fourier transform infrared (FT-IR) spectroscopy. Results demonstrated the MSA-capped CdSe QDs were highly crystalline and possessed good optical properties. Further, the resulting products could be used as fluorescent probes to detect Cu²⁺ ions in physiological buffer solution. The response was linearly proportional to the concentration of Cu²⁺ ion in the range 2×10⁻⁸- 3.5×10⁻⁷ mol L⁻¹ with a detection limit of 3.4 nmol L⁻¹.     

Effect of Nd concentration on structural and optical properties of Nd:Y2O3 transparent ceramic

Y₂O₃ transparent ceramics with different Nd concentration (0.1-7.0at%) were fabricated using ZrO₂ as additive. All the samples exhibit high transparency over a broad spectral region. The elements (Y, O and Nd) are uniformly distributed in the ceramic body, and the average grain size increases with Nd content. Based on the absorption spectrum, the Judd-Ofelt intensity parameters are calculated (Ω₂=4.364×10⁻²⁰ cm², Ω₄=3.609×10⁻²⁰ cm² and Ω₆=2.919×10⁻²⁰ cm²). The absorption coefficients increase linearly with Nd³⁺ doping concentration. The absorption cross-section at 804 nm and stimulated emission cross-section at 1078 nm are calculated to be 1.54×10⁻²⁰ and 7.24×10⁻²⁰ cm², respectively. All the emission bands exhibit the highest emission intensities with 1.0at% Nd³⁺ ion content, while the lifetime decreases dramatically from 321.5 μs (0.1at% Nd) to 17.9 μs (7.0at% Nd). According to the emission spectra and measured lifetime, the optimum doping concentration of Nd³⁺ ion in Y₂O₃ transparent ceramic might be around 1.0at%.     

Fiber optic Fabry-Perot pressure sensor with low sensitivity to temperature changes for downhole application

Pressure and temperature are two important parameters in reservoir engineering. The fiber optic sensors can be used for permanent downhole monitoring. In this paper, we propose an extrinsic fiber Fabry-Perot interferometer (EFPI) sensor for pressure measurement with low sensitivity variation. The pressure sensitivity of EFPI sensor and of the fiber Bragg grating (FBG) sensors have been measured. The experimental pressure sensitivity for EFPI and FBG sensors are measured to be 2.75 × 10⁻⁸ 1/kPa and 1.52 × 10⁻⁸ 1/kPa, respectively. The temperature cross-sensitivity problem of the EFPI sensor has been solved by a new technique. The temperature sensitivity of EFPI sensor has been decreased to 1.2 × 10⁻⁶/°C, while the temperature sensitivity of non-compensated EFPI sensor has been measured to be 16.4 × 10⁻⁶/°C. The results show that the EFPI sensor has a higher pressure sensitivity and good capability to decrease temperature sensitivity in comparison to FBG sensor.     

XPS study of silicon surface after ultra-low-energy ion implantation

Ultra-low-energy ion implantation of silicon with a hydrogen-terminated (0 0 1) surface was carried out using a mass-separated ³¹P⁺ ion beam. The ion energy was 30 eV, the displacement energy of silicon, and the ion doses were 6 × 10¹³ ions/cm². Annealing after the implantation was not carried out. The effects of ion implantation on the surface electrical state of silicon were investigated using X-ray photoelectron spectroscopy (XPS). The Si 2p peak position using XPS depends on the doping conditions because the Fermi level of the hydrogen-terminated silicon surface is unpinned. The Si 2p peak position of the specimen after ion implantation at a vacuum pressure of 3 × 10⁻⁷ Pa was shifted to the higher energy region. It suggested the possibility of phosphorus doping in silicon without annealing. In the case of ion implantation at 5 × 10⁻⁵ Pa, the Si 2p peak position was not shifted, and the peak was broadened because of the damage by the fast neutrals. Ultra-low-energy ion doping can be achieved at ultra-high-vacuum conditions.     

ESR and optical study of Mn doped potassium hydrogen sulphate

The ESR spectrum of Mn²⁺ doped potassium hydrogen sulphate at liquid nitrogen temperature (77 K) has been analyzed and site of entered Mn²⁺ in the lattice has been discussed. The values of the zero field parameters that give good fit to the observed ESR spectra have been obtained. The obtained g, A, B, D, E and a values are 2.0002, 66×10⁻⁴ cm⁻¹, 26×10⁻⁴ cm⁻¹, 59×10⁻⁴ cm⁻¹, 32×10⁻⁴ cm⁻¹ and −8×10⁻⁴ cm⁻¹, respectively. The percentage of covalency of the metal-ligand bond has also been estimated. From the optical absorption study at room temperature, the distortion has been suggested. The observed bands are assigned as transitions from the ⁶A_1g(S) ground state to various excited quartet levels of Mn²⁺ ion in a cubic crystalline field. The electron repulsion and crystal field parameters B, C, Dq and α providing good fit to the observed optical spectra have been evaluated and the values obtained for the parameters are B=627 cm⁻¹, C=2580 cm⁻¹ , Dq=790 cm⁻¹ and α=76 cm⁻¹.     

Effect of swift (∼100 MeV) heavy ion irradiation on surface morphology and electronic transport in Fe film on Si substrate

Fe film (∼50 nm) have been deposited on pSi substrate by electron beam evaporation technique. The bilayers have been irradiated by 100 MeV Fe⁷⁺ ions having fluences of 1 × 10¹³, 1 × 10¹⁴ and 5 × 10¹⁴ ions cm⁻². SEM study of the unirradiated devices show surface modifications having a annular structures. From XRD study of the bilayer, it is observed that grain size has reduced from 70 to 25 nm after the irradiation for a fluence of 1 × 10¹⁴ ions cm⁻². Moreover electronic transport data of the bilayer show practically no effect on the current flow for a fluence of 1 × 10¹³ ions cm⁻² irradiation whereas for 1 × 10¹⁴ ions cm⁻² fluence, there is very significant change in current flow (by two orders in magnitude) across the bilayer. However, for a higher fluence of irradiation 5 × 10¹⁴ ions cm⁻², the bilayer becomes highly resistive. It has been found from the above observations that the fluence of 1 × 10¹⁴ ions cm⁻² of swift heavy ion irradiation is a optimum fluence.     

The spectral sensitivity of long period gratings fabricated in elliptical core D-shaped optical fibre

Long period gratings (LPGs) were written into a D-shaped optical fibre that has an elliptical core with a W-shaped refractive index profile and the first detailed investigation of such LPGs is presented. The LPGs’ attenuation bands were found to be sensitive to the polarisation of the interrogating light with a spectral separation of about 15 nm between the two orthogonal polarisation states. A finite element method was successfully used to model many of the behavioural features of the LPGs. In addition, two spectrally overlapping attenuation bands corresponding to orthogonal polarisation states were observed; modelling successfully reproduced this spectral feature. The spectral sensitivity of both orthogonal states was experimentally measured with respect to temperature and bending. These LPG devices produced blue and red wavelength shifts depending upon the orientation of the bend with measured maximum sensitivities of −3.56 and +6.51 nm m, suggesting that this type of fibre LPG may be useful as a shape/bend orientation sensor with reduced errors associated with polarisation dependence. The use of neighbouring bands to discriminate between temperature and bending was also demonstrated, leading to an overall curvature error of ±0.14 m⁻¹ and an overall temperature error of ±0.3 °C with a maximum polarisation dependence error of ±8 × 10⁻² m⁻¹ for curvature and ±5 × 10⁻² °C for temperature.     

A novel blue-emitting phosphor: BaAl2B2O7: Pb

Pb²⁺ doped BaAl₂B₂O₇ materials were prepared by a solution combustion synthesis. The phase of the synthesized materials was determined using the powder X-ray diffraction. The photoluminescent properties of Pb²⁺ doped BaAl₂B₂O₇ materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of BaAl₂B₂O₇: Pb²⁺ were observed at 423 and 266 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for BaAl₂B₂O₇: Pb²⁺ was investigated. The Stokes shifts of BaAl₂B₂O₇: Pb²⁺ was calculated to be 13 953 cm⁻¹.     

Effects of swift heavy ion irradiation on the electrical characteristics of Au/n-GaAs Schottky diodes

Metal-semiconductor diode of Au/n-GaAs is studied under the irradiation of swift heavy ion (SHI) beam (80 MeV ¹⁶O⁶⁺), using in situ current-voltage characterization technique. The diode parameters like ideality factor, barrier height, and leakage current are observed to vary with irradiation fluence. Significantly, the diode performance improves at a high fluence of 2 × 10¹³ ions cm⁻² with a large decrease of reverse leakage current in comparison to the original as deposited sample. The Schottky barrier height (SBH) also increases with fluence. At a high irradiation fluence of 5 × 10¹³ ions cm⁻² the SBH (0.62 ± 0.01 eV) is much larger than that of the as deposited sample (0.55 ± 0.01 eV). The diode parameters remain stable over a large range of irradiation up to fluence of 8 × 10¹³ ions cm⁻². A prominent annealing effect of the swift ion beam owing to moderate electronic excitation and high ratio of electronic energy loss to the nuclear loss is found to be responsible for the improvement in diode characteristics.     

Electron beam induced green luminescence and degradation study of CaS:Ce nanocrystalline phosphors for FED applications

Green luminescence and degradation of Ce³⁺ doped CaS nanocrystalline phosphors were studied with a 2 keV, 10 μA electron beam in an O₂ environment. The nanophosphors were synthesized by the co-precipitation method. The samples were characterized using X-ray diffraction, Transmission electron microscopy, Scanning electron microscopy/electron dispersive X-ray spectroscopy and Photoluminescence (PL) spectroscopy. Cubic CaS with an average particle size of 42 ± 2 nm was obtained. PL emission was observed at 507 nm and a shoulder at 560 nm with an excitation wavelength of 460 nm. Auger electron spectroscopy and Cathodoluminescence (CL) were used to monitor the changes in the surface composition of the CaS:Ce³⁺ nanocrystalline phosphors during electron bombardment in an O₂ environment. The effect of different oxygen pressures ranging from 1 × 10⁻⁸ to 1 × 10⁻⁶ Torr on the CL intensity was also investigated. A CaSO₄ layer was observed on the surface after the electron beam degradation. The CL intensity was found to decrease up to 30% of its original intensity at 1 × 10⁻⁶ Torr oxygen pressure after an electron dose of 50 C/cm². The formation of oxygen defects during electron bombardment may also be responsible for the decrease in CL intensity.     

Determination of lead in Yellow River using ammonium molybdate as a molecular probe by resonance light scattering technique

A novel method for the determination of trace lead in Yellow River using ammonium molybdate (AM) as a molecular probe based on resonance light scattering (RLS) has been developed. In the presence of KHC₈H₄O₄-NaOH buffer solution, Pb²⁺ can react with AM to form an association, which results in the significant enhancement of RLS intensity and the appearance of the corresponding RLS characteristics. The enhanced RLS intensity is directly proportional to the concentration of Pb²⁺ in the range of 0.01-1.0 μg mL⁻¹. The detection limit can achieve 1.89 ng mL⁻¹. Moreover, the characteristics of RLS spectra of the complexes, the optimum conditions and the influencing factors have been investigated. The method has high selectivity and sensitivity, and was applied to the determination of Pb²⁺ in Yellow River with satisfactory results, which was in agreement with that of atomic absorbance spectrometry (AAS).     

Experimental study of carbon particle charging at shock-wave pyrolysis of C3O2

The temporal variation in electron and ion concentrations have been measured in shock-heated mixtures of Ar + (0-2)% C₃O₂ in the 2000-3600 K temperature and 15-30 bar pressure range. Experiments in pure argon proved that the observed free electrons and ions originate from inherent impurities of sodium. The equilibrium concentrations of free charges in argon were established during (1-3) × 10⁻⁵ s and varied from 4 × 10¹¹ cm⁻³ at T₅ = 2500 K to 5 × 10¹² cm⁻³ at 3500 K. In the reactive mixtures, containing C₃O₂, the time profiles of electron and ion concentrations showed a more complicate behavior—a fast rise to a maximum followed by a gradual decay. The maximum ion concentrations were much higher and electron concentrations were much lower than in similar conditions in argon. The extent of the subsequent decay of electron concentration increased proportionally to the square of the C₃O₂ concentration. In the mixture with 2% C₃O₂ the final electron concentration was about 100 times less than in pure argon. The characteristic decay time of free charges varied from 400 to 40 μs and decreased proportionally to the square root of the charge concentration. The data analysis is based on the assumption that the observed redistribution of electron and ion concentrations is caused by charging of the carbon particles formed during pyrolysis of C₃O₂. The kinetics of particle charging and the final distribution of charges were evaluated by the analysis of electron and ion fluxes to the particles in accordance with the electric potentials of charged particles and corresponding sodium ionization. A predominance of negatively charged particles, caused by the high electron mobility, resulted in their much higher concentration than the concentration of free electrons.     

Enhancement of room temperature ferromagnetism of Fe-doped ZnO epitaxial thin films with Al co-doping

Epitaxial films of ZnO doped with magnetic ion Fe and, in some cases, with 1% Al show clear evidence of room temperature ferromagnetic ordering. The Al doped optimized samples with carrier concentration n_c∼8.0×10²⁰ cm⁻³ show about 3 times enhanced saturation magnetization (0.58 μ_B/Fe²⁺) than the one with n_c∼3.0×10²⁰ cm⁻³ (0.18 μ_B/Fe²⁺). A clear correlation between the magnetization per transition metal ion and the ratio of the number of carriers to the number of donors have been found as is expected for carrier-induced room temperature ferromagnetism. The transport mechanism of the electrons in all the DMS films at low temperature range has been identified with the Efros's variable range hopping due to the electron-electron Coulomb interaction.     

Characterization of hybrid electrolytes prepared from the Li2S-P2S5 glasses and alkanediols

Inorganic-organic hybrid electrolytes were prepared by the mechanochemical method using the Li⁺ ion conductive 70Li₂S·30P₂S₅ glass and various alkanediols. Local structure of the prepared electrolytes was analyzed by FT-IR and Raman spectroscopy. The effects of the proportion and chain length of alkanediols on conductivity of the hybrid electrolytes were investigated. The hybrid electrolyte with 2 mol.% of 1,4-butanediol exhibited the conductivity of 9.7 × 10^− 5 S cm^− 1 at room temperature and the unity of lithium ion transference number. The use of alkanediols with shorter chain length was effective in increasing conductivity of hybrid electrolytes. The electrolyte using ethyleneglycol showed the highest conductivity of 1.1 × 10^− 4 S cm^− 1 at room temperature. Lowering glass transition temperature by incorporation of alkanediols is responsible for the enhancement of conductivity of hybrid electrolytes.     

Numerical analysis of amplification characteristics of ErxY2 − xSiO5

The gain characteristics of Er_xY_2 − xSiO₅ waveguide amplifiers have been investigated by solving rate equations and propagation equations. The gain at 1.53 μm as a function of waveguide length, Er³⁺ concentration and pump power is studied pumping at three different wavelengths of 654 nm, 980 nm and 1480 nm, respectively. The optimum Er³⁺ concentrations of 1 × 10²¹ cm^− 3-2 × 10²¹ cm^− 3 with the high gain are obtained for all three pump wavelengths. Pumping at 654 nm wavelength is shown to be the most efficient one due to weak cooperative upconversion. A maximum 16 dB gain at 1 mm waveguide length under a 30 mW pump with Er³⁺ concentration of 1 × 10²¹ cm^− 3 is demonstrated pumping at 654 nm wavelength.