Conjugate addition of aromatic amines to ethenetricarboxylates

The conjugate addition of amines is considered to be a useful reaction in synthetic organic chemistry. The reaction of reactive electrophilic olefins, ethenetricarboxylates, and aromatic amines with and without catalytic Lewis acids such as ZnCl₂ and ZnBr₂ at room temperature gave amine adducts in high yields. The products were converted to α-amino acid, dl-aspartic acid derivatives. Using Lewis acids such as Sc(OTf)₃ and Zn(OTf)₂ at higher temperature (40-80 °C), the reaction of ethenetricarboxylates and N-methylaniline gave an aromatic substitution product. A catalytic enantioselective conjugate addition using a chiral Lewis acid was also investigated. For example, the reaction of 1,1-diethyl 2-tert-butyl ethenetricarboxylate with N-methylaniline in the presence of chiral bisoxazoline-Cu(II) complex in THF at −20 °C for 17 h gave an amine adduct in 91% yield and 78% ee. On the other hand, the reaction with aniline and primary aniline derivatives gave adducts with almost no ee%.     

Identification and determination of carboxylic acids in food samples using 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) as labeling reagent by HPLC with FLD and APCI/MS

A new labeling reagent for carboxylic acids, 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) has been designed and synthesized. It was used to label eight fatty acids (lauric acid, myristic acid, palmitic acid, stearic acid, arachidic acid, oleic acid, linoleic acid and linolenic acid) and four hydroxy pentacyclic triterpene acids (oleanolic acid, ursolic acid, betulinic acid and maslinic acid), successfully. APIETS could easily and quickly label carboxylic acids in the presence of K₂CO₃ catalyst at 85 °C for 35 min in N,N-dimethylformamide solvent. The carboxylic acids derivatives were separated on a C₈ reversed-phase column with gradient elution and fluorescence detection at λ_ex/λ_em = 315/435 nm. Identification of these derivatives was carried out by online mass spectrometry with atmospheric pressure chemical ionization in positive ion mode. The detection limits obtained were 13.37-30.26 fmol (signal-to-noise ratio of 3). The proposed method has been applied to the quantification of carboxylic acids in sultana raisin (Thompson seedless), hawthorn flake (Crataegus pinnatifida Bge.), Lycium barbarum seed oil and Microula sikkimensis seed oil with recoveries over 95.3%. It has been demonstrated that APIETS is a prominent labeling reagent for determining carboxylic acids with high performance liquid chromatography.     

P2O5/SiO2 as an efficient and recyclable catalyst for N-Acylation of sulfonamides under heterogeneous and solvent-free conditions

A convenient synthetic method for N-acylation of sulfonamides in the presence of P₂O₅/SiO₂ is described. Carboxylic acid anhydrides and carboxylic acid chlorides were used as acylating agents and the reactions were carried out in CH₂Cl₂ or solventfree conditions. The catalyst can be recovered by simple filtration and can be used in the subsequent reactions.     

Simple method for the synthesis of bicyclic pyridine bases from 1-ethynylcycloalkanols and carboxylic acid chlorides

Conclusions A new, simple and effective method was developed for the synthesis of difficultly obtainable bicyclic pyridine bases by the condensation of cyclic ethynylcarbinols with carboxylic acid anhydrides in the presence of an equimolar ZnCl₂-POCl₃ mixture followed by treatment with ammonium hydroxide.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2604–2607, November, 1988.     

Friedel-Crafts acylation reaction using carboxylic acids as acylating agents

Dehydrative Friedel-Crafts acylation reaction of aromatic compounds with carboxylic acids as acylating agents was investigated in the presence of Lewis acid- or Brønsted acid-catalyst. Various metal triflates and bis(trifluoromethanesulfonyl)amides showed catalytic activity at high temperature, among which Eu(NTf₂)₃ proved to be the most effective and efficiently catalyzed the acylation reaction of alkyl- and alkoxybenzenes with aliphatic and aromatic carboxylic acids at 250 °C. Bi(NTf₂)₃ was more effective than Eu(NTf₂)₃ at lower temperature, but proved to be hydrolyzed in the presence of a small amount of water to give HNTf₂ and [Bi₆O₄(OH)₄(H₂O)₆](NTf₂)₆. The structure of the latter compound was confirmed by a single crystal X-ray analysis. Among five Brønsted acids, HOTf, HNTf₂, HCTf₃, TsOH, and Nafion^® SAC-13, HNTf₂ has proved to be the most efficient catalyst and more effective than Eu(NTf₂)₃ for the acylation of p-xylene with heptanoic acid at 220 °C or lower temperature. HNTf₂ catalyzed the acylation of anisole with carboxylic acids in high yields in refluxing toluene with azeotropic removal of water.     

Synthesis of norfloxacin analogues catalyzed by Lewis and Brönsted acids: An alternative pathway

An alternative synthetic pathway to prepare norfloxacin analogues is presented. Three Lewis acids (CeCl₃·7H₂O, AlCl₃·6H₂O, ZnCl₂) and one Brönsted acid (TsOH) were tested as catalysts in the preparation of 3,4-difluoroacrylate. Cyclization of this acrylate at 55 °C was achieved with the use of Eaton's reagent (P₂O₅/MeSO₃H) a known Brönsted acid. The fluoroquinolone-boron complex presented high yields on C-7 nucleophilic substitution of the fluorine atom by different heterocyclic amines with low, medium and strong nucleophilic character.     

Lewis acid catalyzed asymmetric halohydrin reactions of chiral α,β-unsaturated carboxylic acid derivatives with N-halosuccinimide (NXS) as the halogen source

Lewis acid catalyzed asymmetric halohydrin reactions—(halohydroxylation as well as halomethoxylation) of chiral α,β-unsaturated carboxylic acid derivatives were performed using N-halosuccinimide (NXS; X = Br, I) as the halogen source. Regio- and anti-selectivity of 100% and moderate to good diastereoselectivity with good yields were observed when Oppolzer’s sultam was used as the chiral auxiliary. Among the Lewis acids, Yb(OTf)₃ was found to be the best catalyst. Alkenoyl and cinnamoyl substrates smoothly underwent bromohydrin reactions and the more electron-rich cinnamoyl substrates preferred to undergo iodohydrin reactions. However, electron-deficient cinnamoyl substrates did not respond to this Lewis acid catalyzed halohydrin reaction with NXS (X = Cl, Br, I).     

Intramolecular 1,3-dipolar cycloaddition of unsaturated nitrones derived from methyl α-d-glucopyranoside

The intramolecular 1,3-dipolar cycloaddition of unsaturated nitrones derived from methyl α-d-glucopyranoside with 2-furaldehyde has been studied. This cycloaddition was found to afford three 9-oxa-1-azabicyclo[4.2.1]nonane diastereomers in a 3:1:1 ratio [with the principal isomer possessing a (3S,4R,5S,6S,8S) configuration, determined by NMR spectroscopy]. The effects of different Lewis acid catalysts (MgCl₂, ZnCl₂ and BF₃·OEt₂) on yields and diastereomeric ratios have been examined in detail. The best result (90% yield) was achieved when MgCl₂ was present (in toluene, 120 °C bath temperature, 12 h). The stereoselectivity of the 1,3-dipolar cycloaddition was not significantly altered under the conditions investigated.     

Facile stereoselective synthesis of cis- and trans-3-alkoxyazetidin-2-ones

A highly stereoselective synthesis of cis- and trans-3-alkoxy-3-phenyl/benzylthioazetidin-2-ones is described. The reaction of α-chlorosulfide-β-lactams with various alcohols catalyzed by a Lewis acid such as ZnCl₂ in the presence of molecular sieves (3-4 Å) leads to cis-3-alkoxy-3-phenyl/benzylthio-β-lactams whereas treatment of potassium 2-alkoxy-2-phenylthioethanoate with appropriate Schiff's base using POCl₃ in the presence of triethylamine leads to the formation of trans-3-alkoxy-3-phenylthioazetidin-2-ones as major products.     

Catalyse par les acides de Lewis—I : Etude cinetique de la reaction d'esterification des olefines catalysee par SnCl4

Lewis acids, such as SnCl₄, TiCl₄, FeCl₃ AlCl₃ and ZnCl₂ catalyze the esterification of olefins in CH₃CO₂H or CH₃CH₂CO₂H. SnCl₄ reacts with carboxylic acids to give the acid complex SnCl₄.2(RCO₂H), which raises the level of acidity. The following relation applies: log k_ex = αH_o + β (α≠?1), activation energy (7·5 kcal/mole) and activation entropy (?28 cal/M°K). Solvent isotope effects are measured (k_H/k_D>1). The mechanism implies a slow proton transfer.     

Synthesis conditions and activity of various Lewis acids for the fluorination of trichloromethoxy-benzene by HF in liquid phase

The experimental conditions (temperature, reaction time, amount of hydrogen fluoride (HF)) for the comparison of the performances of various Lewis acids in the liquid phase fluorination by HF of the trichloromethoxy-benzene were determined by using SbCl₅ as the reference catalyst. After 1 h reaction at 50 °C, C₆H₅OCCl₃ was totally converted into C₆H₅OCF₃ requiring only 2 mol% of SbCl₅ and a stoichiometric amount of HF. The most efficient catalysts were found to be chlorinated Lewis acids in which the metal is at the state of oxidation +V (SbCl₅, MoCl₅, TaCl₅ and NbCl₅). The appropriate catalyst has to be able to form a nucleophilic complex with HF, which constitutes the actual fluorinating agent and is more efficient than HF alone.     

Studies in Cyclocopolymerization. XII. Cyclocopolymerization of the Donor:Acceptor Pair 1,4-Diene:Monoolefin Lewis Acid Complex

Acrylonitrile (AN) is known to form a cyclocopolymer with 1,4-dienes such as divinyl ether (DVE) and 3,3-dimethyl-1,4-pentadiene with radical initiators. Since AN has a high tendency toward homopolymerization, the copolymers are not of regular structure. Lewis acids such as ZnCl₂ and Al(Et)₃ were used in this paper to increase the e-values of AN and methacrylonitrile (MAN) through complexation. AN, MAN, and 2- and 4-vinylpyridine were copolymerized with DVE and 1,4-pentadiene with Lewis acids. In all cases the rate of copolymerization was much enhanced and the alter-nating tendency of the cyclocopolymer increased with the amount of added Lewis acids. A 1:2 DVE:AN alternating cyclocopolymer was obtained spontaneously or with AIBN with Al(Et)₃ in hexane. Also 1:2 alternating cyclocopolymer was successfully obtained in acetone by using a large amount of ZnCl₂. The identification of charge-transfer (CT) complex-ation between the DVE and (AN,¹ ₂, ZnCl₂ complex, and between the 1-hexene and (AN)₂ZnCl₂ complex may supoort the par-ticipation of a CT complex formed between all 1,4-dienes studied and the monoolefin-Lewis acid complexes in the     

Cyclic mechanism in the trapping of carbonyl oxides with alcohols and carboxylic acids

The reaction of diphenylcarbonyl oxide with alcohols and carboxylic acids, which has been classified as a nucleophilic trapping, is shown to be in the reactivity order: AcOH ? MeOH > CF₃CH₂OH > EtOH ? t-BuOH. A laser-flash spectroscopy indicated that the reaction of carboxylic acids is very fast, that is, one-tenth of the diffusion rate. These results suggest that the hydroxyl compounds react as an acid and a nucleophile at the same time and the major reaction is via the seven- and five-membered cyclic mechanism for RCO₂H and ROH, respectively.     

Liquefaction of corn stover and preparation of polyester from the liquefied polyol

This research investigated a novel process to prepare polyester from corn stover through liquefaction and crosslinking processes. First, corn stover was liquefied in organic solvents (90 wt% ethylene glycol and 10 wt% ethylene carbonate) with catalysts at moderate temperature under atmospheric pressure. The effect of liquefaction temperature, biomass content, and type of catalyst, such H₂SO₄, HCl, H₃PO₄, and ZnCl₂, was evaluated. Higher liquefaction yield was achieved in 2 wt% sulfuric acid, 1/4 (w/w) stover to liquefying reagent ratio; 160°C temperature, in 2h. The liquefied corn stover was rich in polyols, which can be directly used as feedstock for making polymers without further separation or purification. Second, polyester was made from the liquefied corn stover by crosslinking with multifunctional carboxylic acids and/or cyclic acid anhydrides. The tensile strength of polyester is about 5 MPa and the elongation is around 35%. The polyester is stable in cold water and organic solvents and readily biodegradable as indicated by 82% weight loss when buried in damp soil for 10 mo. The results indicate that this novel polyester could be used for the biodegradable garden mulch film production.     

Separation of C1-C5 aliphatic carboxylic acids on a highly sulfonated styrene-divinylbenzene copolymer resin column with a C6 aliphatic carboxylic acid solution as the mobile phase

Simultaneous separation of C₁-C₅ aliphatic carboxylic acids (formic, acetic, propionic, iso-butyric, butyric, iso-valeric and valeric acids) on a highly sulfonated styrene-divinylbenzene copolymer resin column (TSKgel SCX,  mm i.d.) was performed with C₆ aliphatic carboxylic acids (3-methyl-n-valeric, iso-caproic and caproic acids) solutions as the mobile phases. Using 0.05 mM sulfuric acid at pH 4.0 as the mobile phase, although good separation of these C₁-C₅ acids was achieved, peaks of the C₅ acids (iso-valeric and valeric acids) with large hydrophobicity tailed strongly. In contrast, using 1 mM C₆ acids at pH ca. 4.0 as the mobile phases, although vacant peaks corresponding to the C₆ acids in the mobile phase appeared, the peak shapes of the C₅ acids were improved greatly. Excellent simultaneous separation, symmetrical peaks and relatively high-sensitivity conductimetric detection for these C₁-C₅ acids were achieved on the TSKgel SCX column in 15 min with 1 mM iso-caproic acid at pH 4.0 as the mobile phase.     

Determination of the carboxylic acids in acidic and basic process samples by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) with indirect UV detection was used in developing a method for the simultaneous determination of inorganic anions, aliphatic and heterocyclic organic acids in various processed samples. The analytes were determined simultaneously in 10 min using an electrolyte containing 20 mM 2,3-pyrazine dicarboxylic acid, 65 mM tricine, 2 mM BaCl₂, 0.5 mM cetyltrimethylammonium bromide, and 2 M urea at pH 8.06. Linear plots for the analytes were obtained in the concentration range of 2–150 mg L⁻¹. Relative standard deviations (RSDs) of peak areas during a 3-day analysis period varied from 5.5% for glycolate to 9.5% for oxalate. RSDs of migration times varied between 0.4% and 1.1%. The detection limit (at S/N 3) was 1 mg L⁻¹ for all the analytes studied. The proposed method was successfully demonstrated for the determination of carboxylic acids in eight oxygen treated samples of commercial softwood and hardwood kraft lignin and two red wine samples of Pinot Noir grapes. In the kraft lignin samples the concentrations of carboxylic acids correspond to the oxidation time. The acid concentrations of wine varied considerable.     

Cross coupling of 3-bromopyridine and sulfonamides (RNHSO2R·R = H, Me, alkyl; R = alkyl and aryl) catalyzed by CuI/1,3-di(pyridin-2-yl)propane-1,3-dione

N-(3-Pyridinyl)-substituted secondary and tertiary sulfonamides have been synthesized in good to excellent yields by the reaction of 3-bromopyridine with primary and secondary alkyl and aryl sulfonamides (MeSO₂NH₂, MeSO₂NHMe, TolSO₂NH₂, TolSO₂NHMe, 1,3-propanesultam, and 1,4-butanesultam), catalyzed by CuI (20 mol %) and 1,3-di(pyridin-2-yl)propane-1,3-dione (20 mol %) with K₂CO₃ (200 mol %) in DMF (0.17 M for ArBr) at 110-120 °C over 36-40 h. 2-Bromopyridine, 4-bromopyridine, and a wide variety of substituted phenyl bromides can also be successfully coupled with sulfonamides under these reaction conditions.     

Bromination of pyridine in the presence of some lewis acids

The bromination of pyridine in the form of complexes with some Lewis acids and in the presence of catalytic amounts of the latter was studied. It is shown that bromination takes place readily at 100 °C in the presence of catalysts such as AlCl₃, ZnCl₂, CuCl₂, SbCl₃, InCl₃, TeCl₄, and HgCl₂. The principal bromination products are 3-bromopyridine and 3,5-dibromopyridine. The problem of the possibility of so-called back-bonding in the case of elements of the higher periods (particularly In, Te, and Sb) is discussed.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1236–1239, September, 1981.     

Metal ions recovery with alginic acid coupled to ultrafiltration membrane

Alginic acid (AA) is a natural polysaccharide derived from brown algae. Naturally AA is present in cellular wall forming insoluble complexes with ions as calcium, magnesium, and sodium. This polymer is composed of uronic acids as d-manuronic acid and l-guloronic acid (units differing in C5 configuration) which are disposed in blocks or alternating on principal chain due its spatial configuration. In its structure only hydroxy and carboxylic acid are present, with a pK_{a alginic acid} = 3.45. At pH = 4.3 this polymer is completely soluble in water. Metal ion retention was evaluated using liquid-phase polymer-based retention (LPR) technique elution method, and metal ions studied were Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ at different pH and filtration factor. A high efficiency for all metal ions at all pH was reveled with a maximum at pH = 4.5 of 100% of majority of metal ions. To evaluate the maximum retention capacity (MRC) of AA, LPR technique concentration method was used. Metal ion/polymer ratio from 48 to 325 mg/g for Zn²⁺ and Ag⁺ were studied, respectively. Homopolymer and polymer-metal ion complexes were characterized using FT-IR, Far-IR spectroscopy, dynamic light scattering (DLS), and thermogravimetric analysis. FT-IR revealed relevant shifts between AA and PMC, which involve carboxylic acid, hydroxy, and ether groups. DLS shows non-pH-dependent sizes of alginic acid-silver complexes.     

Directly Bridging Indoles to 3,3′‐Bisindolylmethanes by Using Carboxylic Acids and Hydrosilanes under Mild Conditions

A straightforward Lewis acid‐promoted protocol for 3,3′‐bisindolylmethanes (BIMs) synthesis by reductive alkylation of indoles at the C3 position with carboxylic acids in the presence of hydrosilane was developed for the first time. Instead of aldehydes, more readily available, stable, and easy‐to‐handle carboxylic acids have been employed as alternative alkylating agents. As an efficient organocatalyst, B(C₆F₅)₃ enables the reductive alkylation of various substituted indole derivatives with carboxylic acids with up to 98 % yield at room temperature and under neat conditions. This metal‐free strategy offers an alternative approach for the direct functionalization of indoles to BIMs with carboxylic acids and such protocol allows selective reduction of carboxylic acid to aldehyde in combination with C−C bond formation.