Reversed-phase HPLC of peptides: Assessing column and solvent selectivity on standard, polar-embedded and polar endcapped columns

We desired to evaluate the chromatographic selectivity for peptides of silica-based RP high-performance liquid chromatography stationary phases with various modifications (polar embedding and polar endcapping on C(18) columns; ether-linked phenyl column with polar endcapping) compared with n-alkyl (C(18), C(8)) and aromatic phenylhexyl columns. Thus, we have designed and synthesized two series of synthetic peptide standards with the sequence Gly-Gly-Leu-Gly-Gly-Ala-Leu-Gly-X-Leu-Lys-Lys-amide, where the N-terminal either contains a free α-amino group (AmC series) or is N(α)-acetylated (AcC series) and where position X is substituted by Gly, Ala, Val, Ile, Phe or Tyr. These represent series of peptides with single substitutions of n-alkyl (Gly相似文献   

Synthesis and characterization of novel polar-embedded silica stationary phases for use in reversed-phase high-performance liquid chromatography

We have developed a series of new C₁₀ dipeptide stationary phases via a simple and effective synthetic method. The preparation of the new phases involves the synthesis of silanes and the surface modification of silica. Chromatographic evaluations of these columns were performed using the Engelhardt, Tanaka, and Neue test mixtures. The applicability of these new stationary phases was also evaluated using a series of diagnostic probes including acids, bases or neutral compounds and several generic applications. These new C₁₀ dipeptide stationary phases showed excellent hydrolytic stability over a wide pH range. Like other existing amide-embedded columns, these new stationary phases exhibit higher retention for polar and hydrophilic compounds and different selectivity as compared to conventional C₁₈ columns. These new phases are compatible with 100% aqueous mobile phases, and also provide high column efficiency and good peak shapes for both acidic and basic compounds.     

Characterization of calixarene‐bonded stationary phases

Calixarene‐bonded stationary phases received growing interest in HPLC as stationary phases with special retention characteristics and selectivity. The commercially available unsubstituted and p‐tert‐butyl‐substituted Caltrex^® columns have been intensively studied and characterized in our workgroup. They can be used as reversed phases, yet they support additional interactions. Especially, their steric, polar and ionic properties differ from conventional alkyl‐bonded phases. However, also the hydrophobic interaction shows differences since adsorption and partition interactions on or in a bonded layer of calixarenes are not similar to those of alkyl‐bonded layers. The relative strength of the hydrophobic properties of the stationary phases has been found depending on the methanol concentration of the mobile phase. Generally, the dependencies of their interaction strengths on mobile‐phase conditions, e.g. the change of the intensity of the hydrogen‐bonding abilities with decreasing methanol content, are not similar from phase to phase either. This probably gives calixarene‐bonded stationary phases enhanced suitability for analyses at extreme compositions of the mobile phase. An overview about the synthesis, retention and selectivity properties of Caltrex^® columns is given here.     

Selectivity of calixarene‐bonded silica phases in HPLC: Description of special characteristics with a multiple term linear equation at different methanol concentrations

Retention and selectivity characteristics of different calixarene‐, resorcinarene‐ and alkyl‐bonded stationary phases are examined by analyzing a set of test solutes covering the main interactions (hydrophobic, steric, ionic, polar) that apply in HPLC. Therefore Dolan and Snyder's multiple term linear equation has been adapted to fit the properties of calixarene‐bonded columns. The obtained parameters are used to describe retention and selectivity of the novel Caltrex^® phases and to elucidate underlying mechanisms of retention. Here, differences of stationary phase characteristics at different methanol concentrations in the mobile phases are examined. Both selectivity and retention were found to depend on the methanol content. Differences of these dependencies were found for different stationary phases and interactions. The differences between common alkyl‐bonded and novel calixarene‐bonded phases increase with increasing methanol content.     

Automated screening of reversed‐phase stationary phases for small‐molecule separations using liquid chromatography with mass spectrometry

There are various reversed‐phase stationary phases that offer significant differences in selectivity and retention. To investigate different reversed‐phase stationary phases (aqueous stable C₁₈, biphenyl, pentafluorophenyl propyl, and polar‐embedded alkyl) in an automated fashion, commercial software and associated hardware for mobile phase and column selection were used in conjunction with liquid chromatography and a triple quadrupole mass spectrometer detector. A model analyte mixture was prepared using a combination of standards from varying classes of analytes (including drugs, drugs of abuse, amino acids, nicotine, and nicotine‐like compounds). Chromatographic results revealed diverse variations in selectivity and peak shape. Differences in the elution order of analytes on the polar‐embedded alkyl phase for several analytes showed distinct selectivity differences compared to the aqueous C₁₈ phase. The electron‐rich pentafluorophenyl propyl phase showed unique selectivity toward protonated amines. The biphenyl phase provided further changes in selectivity relative to C₁₈ with a methanolic phase, but it behaved very similarly to a C₁₈ when an acetonitrile‐based mobile phase was evaluated. This study shows the value of rapid column screening as an alternative to excessive mobile phase variation to obtain suitable chromatographic settings for analyte separation.     

Characterization of a highly stable zwitterionic hydrophilic interaction chromatography stationary phase based on hybrid organic–inorganic particles

We have characterized a sulfobetaine stationary phase based on 1.7 μm ethylene-bridged hybrid organic–inorganic particles, which is intended for use in hydrophilic interaction chromatography. The efficiency of a column packed with this material was determined as a function of flow rate, demonstrating a minimum reduced plate height of 2.4. The batch-to-batch reproducibility was assessed using the separation of a mixture of acids, bases, and neutrals. We compared the retention and selectivity of the hybrid sulfobetaine stationary phase to that of several benchmark materials. The hybrid sulfobetaine material gave strong retention for polar neutrals and high selectivity for methyl groups, hydroxy groups, and configurational isomers. Large differences in cation and anion retention were observed among the columns. We characterized the acid and base stability of the hybrid sulfobetaine stationary phase, using accelerated tests at pH 1.3 and 11.0, both at 70°C. The results support a recommended pH range of 2–10. We also investigated the performance of columns packed with this material for metal-sensitive analytes, comparing conventional stainless steel column hardware to hardware that incorporates hybrid surface technology to mitigate interactions with metal surfaces. Compared to the conventional columns, the hybrid surface technology columns showed a greatly improved peak shape.     

Characterization of the properties of stationary phases for liquid chromatography in aqueous mobile phases using aromatic sulphonic acids as the test compounds

We investigated the effects of the concentration of naphthalene sulphonic acids (NSAs) as anionic test compounds in the injected sample and of the salt additives to the mobile phase on ion-exclusion. The retention behaviour of NSAs sensitively reflects even minor changes in the ionic and hydrophobic interactions and can be useful for predicting the effects of the stationary phases in reversed-phase chromatography of polar and ionic compounds, both small ones and biopolymers, e.g., oligonucleotides. We studied chromatographic properties of several stationary phases intended for separations in aqueous mobile phases: a C18 column end-capped with polar hydrophilic groups, a densely bonded C8 column doubly end-capped with short alkyl groups, a short alkyl stationary phase designed to keep full pore accessibility in highly-aqueous mobile phases and a Bidentate column with “bridged” C18 groups attached to the silica hydride support. The chemistry and pore structure of various types of column packing materials and of the salt additives to the mobile phase affect the proportion of the pore volume non-accessible to anions due to ion-exclusion and consequently the peak asymmetry and hydrophobic selectivity in reversed-phase chromatography of organic acids. We also addressed the problems connected with the determination of column hold-up volume in aqueous mobile phases. The accessibility of the stationary phase for anionic compounds in contact with the sample zone is affected by ion-exclusion due to repulsive interactions with the negatively charged surface in the pores of the stationary phase. The accessible part of the stationary phase increases and consequently the migration velocity along the column decreases with increasing concentration of the sample in the zone moving along the column. Because of a limited access to the stationary phase, its capacity can be easily overloaded. The combination of the column overload and ion-exclusion effects may result in fronting or tailing peak asymmetry. To explain this behaviour, we proposed a modified Langmuir model, respecting the variation of the column capacity due to the effects of sample concentration on ion-exclusion.     

Preparation and evaluation of a hydrolytically stable amide-embedded stationary phase

We have developed a new hydrolytically stable amide-embedded stationary phase via a simple and effective synthetic method. The preparation of the new phase involves the synthesis of multifunctional silane ligands and the surface modification of porous silica particles via multiple attachments of these ligands to the silica surface. A hydrolytically stable coating was produced as a result of multiple covalent linkages formed between silane ligands and the silica surface, and cross-linking between adjacent ligands. The resulting amide-embedded stationary phase showed excellent hydrolytic stability over a wide pH range. Like other existing amide-embedded columns, this new stationary phase exhibits higher retention for polar compounds and different selectivity as compared to conventional C18 columns. The new phase is compatible with 100% aqueous mobile phases, and also provides high column efficiency and good peak shapes for both acidic and basic compounds.     

Phenyl‐bonded stationary phases—The influence of polar functional groups on retention and selectivity in reversed‐phase liquid chromatography

The chromatographic properties of four phenyl‐bonded phases with different structures were studied. The columns used were packed with a stationary phase containing a phenyl ring attached to the silica surface using different types of linkage molecules. As a basic characteristic of the bonded phases, the hydrophobicity and silanol activity (polarity) were investigated. The presence of the polar amino and amide groups in the structure of the bonded ligand strongly influences the polarity of the bonded phase. Columns were compared according to methylene selectivity using a series of benzene homologues and according to their shape and size selectivity using polycyclic aromatic hydrocarbons. The measurements were done using methanol/water and acetonitrile/water mobile phases. The presented results show that the presence of polar functional groups in the ligand structure strongly influences the chromatographic properties of the bonded phase.     

A simple approach to prepare a sulfone‐embedded stationary phase for HPLC

In the present study, a polar‐embedded reversed‐phase liquid chromatographic stationary phase that contained internal sulfone groups was prepared. The synthesis involved the “thiol‐ene” click chemistry between the vinyl functionalized silica and 1‐octadecanethiol, followed by the oxidization of sulfide to sulfone groups. The resulting material simultaneously possessed the alkyl chain, i.e. C18, and the internal sulfone groups. Elemental analysis demonstrates that the element contents of the C18/sulfone silica were C 8.94%, H 1.87% and S 0.66%. Chromatographic evaluations indicate that the C18/sulfone stationary phase exhibited a little less retention than the C18/sulfide one. A comparable chromatographic performance of neutral analytes was obtained on these two columns, but much better chromatographic performance in the case of basic and acid analytes was obtained on C18/sulfone stationary phase with additional features such as lower silanol activity, better stability (stable working conditions of pH 1.0–10.0), and better compatibility with 100% aqueous mobile phases. The batch‐to‐batch reproducibility was acceptable (the RSDs of retention times for the probes were no higher than 1.73%), demonstrating the suitability of the applied synthetic strategy for the new stationary phase. The C18/sulfone is a promising polar‐embedded RPLC stationary phase.     

Hydrophilic interaction chromatography coupled to electrospray mass spectrometry for the separation of peptides and protein digests

In this study, the analysis of a peptide set, chosen for their differences in hydrophilicity, and the tryptic digests of bovine cytochrome c and β-lactoglobulin by hydrophilic interaction chromatography–electrospray ionisation mass spectrometry (HILIC–ESI-MS) is demonstrated. Two different types of HILIC phases, i.e., an amide- and an amino-modified silica-based phase, packed into narrow bore or capillary columns, were investigated with separations conducted under either low pH or neutral pH conditions. The separation performance of the two HILIC columns with respect to peak efficiency and selectivity have been documented under these different mobile phase conditions, and the results compared with the performance of a conventional capillary reversed-phase C18 column of similar dimensions. It was found that very good separation of the peptide set could be achieved by using the amide-modified silica column over a broad pH range. Moreover, with the protein digest samples, excellent separation of the tryptic digests was obtained with the amide-modified HILIC column under neutral pH conditions. Compared to the conventional reversed-phase C18 separations, the use of these HILIC columns not only provided complementary separation selectivity, but also offered the capability to identify unique peptides using tandem HILIC–mass spectrometric techniques. These studies therefore highlight the potential of HILIC procedures for future proteomic applications.     

Characterization and comparison of the chromatographic performance of conventional,polar-embedded,and polar-endcapped reversed-phase liquid chromatography stationary phases

We have evaluated and compared the performance of several conventional C18 phases with those possessing either a polar-endcapping group or a polar-embedded group within the primary alkyl ligand and found distinct differences in the chromatographic behavior among the three groups, as well as a high degree of variability within each group. The trend is for the polar-endcapped phases to display similar hydrophobic retention characteristics as the conventional C18 columns, but to express higher hydrogen bonding capacities and silanol activity. The polar-embedded phases displayed the opposite behavior, with a greatly reduced hydrophobic nature compared to the conventional and polar-endcapped C18 phases, and also a very much reduced silanol activity. Most interestingly, it appears that ionic or dipole interactions play a significant role in the overall retention behavior of the polar-embedded phases towards basic and acidic analytes.     

Novel alkyl-modified anionic siloxanes as pseudostationary phases for electrokinetic chromatography: II. Selectivity studied by linear solvation energy relationships.

Anionic, water-soluble siloxane polymers modified with different lengths of alkyl chains have very different selectivity than sodium dodecyl sulfate (SDS) micelles when used as pseudostationary phases in electrokinetic chromatography. The siloxanes in this study are random copolymers with side chains bearing sulfonate groups and alkyl groups (C8, C12, or C18), with the proportion of alkyl groups between 10 and 25% of the total. The differences in selectivity have been studied by linear solvation energy relationships (LSERs). The siloxanes in general have been found to be more cohesive, less polar, more able to interact with solutes through n- and pi-electrons, and more able to accept hydrogen bonds than SDS micelles, while the ability to act as hydrogen bond donors is not significantly different than SDS micelles. In addition, the performance in a pH 7.0 Tris buffer has been investigated and the siloxanes were found to have higher methylene selectivities and more variable electrophoretic mobilities than in borate buffers.     

Selectivity in reversed-phase separations Influence of the stationary phase

The selectivity difference between 15 different stationary phases was measured using a large number of analytes at 2 or 3 different pH values (3, 7 and 10) with acetonitrile and methanol as the mobile phase modifiers. The packings discussed include standard C(8) and C(18) packings, packings with embedded polar groups, a phenyl packing, a pentafluoro-phenyl packing, an adamantylethyl packing and others. The major selectivity differences observed are discussed in detail. Specific effects such as pi-pi interactions on phenyl packings or hydrogen-bond interactions on phases with embedded polar groups are confirmed.     

Chromatographic classification and comparison of commercially available reversed-phase liquid chromatographic columns using principal component analysis

A total of 135 commercially available alkyl, cyano, phenyl, perfluorinated, polar embedded, enhanced polar selectivity (i.e., polar/hydrophilic endcapped), "Aqua type" and a variety of novel phases including some non-silica based stationary phases have been characterised in terms of their surface coverage, hydrophobic selectivity, shape selectivity, hydrogen bonding capacity and ion-exchange capacity at pH 2.7 and 7.6. Principal component analysis has been used to provide a simple graphical comparison of the differences/similarities between columns in the entire database and differing subsets such as "Aqua type"/enhanced polar selectivity phases. The PCA has been correlated to the phase's ability to analyse a range of hydrophilic bases.     

Selectivity Differences Between ODS and Polar Modified Stationary Phases in RP-LC

Several new octadecylsilyl and polar-modified phases were synthesized. Chromatographic evaluations of these columns were performed using the Dolan and Engelhardt test mixtures. The applicability of these new phases was also evaluated with a mixture of acids, bases or neutral compounds. The distinct differences in the chromatographic behavior between the two groups as well as a high degree of variability within each group were observed. The polar-endcapped phases exhibit similar hydrophobic selectivity, higher hydrogen bonding capacities and silanol activity with reference to C18 columns. The polar-embedded phases display a greatly reduced hydrophobic nature and a significantly reduced silanol activity compared to the C18 phases.     

Retention and selectivity properties of carbamate pesticides on novel polar-embedded stationary phases

This study describes the use of stationary phases with polar functionality suitable for the chemical analysis of carbamates pesticides and comparing with conventional alkyl C8 and C18 phases. The emphasis of this study was to compare the selectivity and retention of the pesticides on different stationary phases, bonded onto 1.7 μm partially porous silica particles under isocratic separation condition. Four stationary phases including: phenylaminopropyl (PAP) phase, bidentate propylurea-C18 (BPUC₁₈), C8 and C18, were successfully bonded on the partially porous silica spheres as evidenced by ²⁹Si and ¹³C solid-state NMR analysis. The phenylaminopropyl phase exhibited smaller retentivity and enhanced selectivity compared to the alkyl C8 phase; the analysis time to run separation of the six carbamate pesticides (i.e., methomyl, propoxur, carbofuran, carbaryl, isoprocarb, and promecarb) on the PAP phase was threefold faster than alkyl C8 phase. In a similar manner, the BPUC₁₈ phase shows similar selectivity to that of the PAP phase, but with longer retentivity; although the BPUC₁₈ phase is characterized with a lesser degree of retentivity for the carbamate pesticides than the conventional alkyl C18 phase. We propose that π–π and weak polar interactions between the carbamate pesticides and the PAP phase dominates the separation mechanism and providing a superior selectivity; faster separation time was also achieved as a result of smaller retentivity. Whereas the C8 and C18 bonded phases exhibits only hydrophobic interactions with the pesticides, leading to larger retentivity. The BPUC₁₈ phase is shown to interact via polar–polar interactions in addition to hydrophobic interactions with the pesticides, providing similar selectivity with the PAP phase but with larger retentivity.     

Improved efficiency in micellar liquid chromatography using triethylamine and 1-butanol as mobile phase additives to reduce surfactant adsorption

The effect of triethylamine as a mobile phase modifier on chromatographic efficiency in micellar liquid chromatography (MLC) is reported for nine different columns with various bonded stationary phases and silica pore sizes, including large-pore short alkyl chain, non-porous, and perfluorinated. Reduced plate height (h) versus reduced velocity (nu) plots were constructed for each column and the A' and C' terms calculated using a simplified Van Deemter equation introduced in our previous work. To further explore the practicality of using triethylamine in the micellar mobile phase, the efficiency of nine polar and non-polar substituted benzenes was studied on seven columns. Surfactant adsorption isotherms were measured for five columns with three micellar mobile phases to understand the relationship between adsorbed surfactant, mobile phase additive, and column efficiency. Clear improvements in efficiency were observed with the addition of 2% (v/v) triethylamine to a 1-butanol modified aqueous micellar mobile phase. This finding is supported by the lower amount of surfactant adsorbed onto the stationary phase when TEA is present in the mobile phase compared to an SDS only or a 1-butanol modified SDS mobile phase.     

Influence of solvents on the conformational order of C18 alkyl modified silica gels

The influence of solvents on the conformational order of C(18) alkyl modified silica gels is studied by means of variable temperature FTIR spectroscopy. Symmetric and anti-symmetric CH(2) stretching modes were utilized for getting qualitative information about the changes in alkyl chain conformational order as a function of both protonated and perdeuterated solvents. It was found that interaction between the C(18) alkyl modified silica gels and the mobile phase results in pronounced changes of the alkyl chain conformational order. Furthermore, it was observed that some perdeuterated solvents exhibit isotope effects, which again is reflected by a different alkyl chain conformational order as compared to the corresponding stationary phases with protonated solvents.     

Investigation of polar stationary phases for the separation of sympathomimetic drugs with nano-liquid chromatography in hydrophilic interaction liquid chromatography mode

In this study, the retention and selectivity of a mixture of basic polar drugs were investigated in hydrophilic interaction chromatographic conditions (HILIC) using nano-liquid chromatography (nano-LC). Six sympathomimetic drugs including ephedrine, norephedrine, synephrine, epinephrine, norepinephrine and norphenylephrine were separated by changing experimental parameters such as stationary phase, acetonitrile (ACN) content, buffer pH and concentration, column temperature. Four polar stationary phases (i.e. cyano-, diol-, aminopropyl-silica and Luna HILIC, a cross-linked diol phase) were selected and packed into fused silica capillary columns of 100 μm internal diameter (i.d.). Among the four stationary phases investigated a complete separation of the all studied compounds was achieved with aminopropyl silica and Luna HILIC stationary phases only. Best chromatographic results were obtained employing a mobile phase composed by ACN/water (92/8, v/v) containing 10 mM ammonium formate buffer pH 3. The influence of the capillary temperature on the resolution of the polar basic drugs was investigated in the range between 10 and 50 °C. Linear correlation of ln k vs. 1/T was observed for all the columns; ΔH° values were negative with Luna HILIC and positive with aminopropyl- and diol-silica stationary phases, demonstrating that different mechanisms were involved in the separation.To compare the chromatographic performance of the different columns, Van Deemter curves were also investigated.