Synthesis of Novel Phthalazino[1,2‐b]quinazolinedione Derivatives: Efficient and Practical Reaction of 2‐Amino‐N′‐Arylbenzohydrazides and 2‐Formylbenzoic Acids

This work reported the synthesis of novel phthalazino[1,2‐b]quinazolinedione derivatives through the reaction of 2‐amino‐N′‐arylbenzohydrazides and 2‐formylbenzoic acids in the presence of TsOH in EtOH under reflux conditions.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

One‐pot Sequential Reactions Featuring a Copper‐catalyzed Amination Leading to Pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines and Dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines

Tetracyclic skeletons combining an imidazo[1,2‐a]pyridine moiety with a quinoline framework such as pyrido[2′,1′:2,3]imidazo[4,5‐b]quinoline are stimulating increasing interests since they are close isosteres of a series of powerful antiproliferative compounds. In this paper, we report a novel methodology for the synthesis of pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines through one‐pot sequential reactions of commercially available or readily obtainable 2‐aminopyridines, 2‐bromophenacyl bromides, aqueous ammonia, and aldehydes. Moreover, dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines could also be obtained in a similar manner by using various ketones as the substrates in place of aldehydes. Notably, the whole procedure combines condensation/amination/cyclization reactions in one pot to give complex compounds in a simple and practical manner. Compared with literature methods, the synthetic strategy reported herein has the advantages of readily available starting materials, structural diversity of products, good functional group tolerance, and obviation of step‐by‐step operations.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

Three‐Component One‐Pot Synthesis of Indeno[2′,1′:5,6]Pyrido[2,3‐d]Pyrazole Derivatives in Aqueous Media

A series of indeno[2′,1′:5,6]pyrido[2,3‐d]pyrazoles was synthesized by the three‐component reaction of aldehyde, 5‐amino‐3‐methyl‐1‐phenylpyrazole and 1,3‐indenedione in the presence of SDS in aqueous media. The structures were characterized by IR, ¹H NMR, high resolution mass spectra and were further confirmed by X‐ray diffraction analysis.     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.     

A new two‐dimensional CoII coordination polymer based on bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether and biphenyl‐4,4′‐diyldicarboxylic acid: synthesis,crystal structure and photocatalytic degradation activity

A novel two‐dimensional Co^II coordination framework, namely poly[(μ₂‐biphenyl‐4,4′‐diyldicarboxylato‐κ²O⁴:O^4′){μ₂‐bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether‐κ²N³:N^3′}cobalt(II)], [Co(C₁₄H₈O₄)(C₂₀H₁₈N₄O)]_n, has been prepared and characterized by IR, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. The crystal structure reveals that the compound has an achiral two‐dimensional layered structure based on opposite‐handed helical chains. In addition, it exhibits significant photocatalytic degradation activity for the degradation of methylene blue.     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Iodide‐Selective Electrodes Based on Bis[N(2‐methyl‐phenyl) 4‐Nitro‐thiobenzamidato]mercury(II) and Bis[N‐phenyl 3,5‐Dinitro‐thiobenzamidato]mercury(II) Carriers

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on recently synthesized mercury complexes including Hg(Nmpntb)₂ and Hg(Npdntb)₂ as new carriers for iodide‐selective electrodes by incorporating the membrane ingredients on the surface of graphite electrodes are reported. The effect of various parameters including the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses toward iodide over a wide concentration range of 7×10^?7 to 0.1 M and 1×10^?6 to 0.1 M, with slopes of 59.6±0.8 and 58.9±0.9 mV per decade of iodide concentration and detection limit of 3×10^?7 M and 7×10^?7 for Hg(Npdntb)₂ and Hg(Nmpntb)₂, respectively, over a wide pH range of 3–11. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show good ability to discriminate iodide over several inorganic and organic anions. The electrodes were successfully applied to direct determination of iodide in synthetic mixture, waste water and drinking water and as indicator electrodes in precipitation titrations.     

An Efficient Synthesis of 3,3′,4,4′‐Tetrahydro‐4,4′‐bibenzo[e][1,3]oxazine‐2,2′‐dione Derivatives with the Aid of Low‐valent Titanium

Synthesis of 3,3′,4,4′‐tetrahydro‐4,4′‐bibenzo[e][1,3]oxazine‐2,2′‐diones via reaction of salicylidendphenylhydrazone and triphosgene with the aid of low‐valent titanium reagent is described. This method has the advantages of accessible starting materials, good yields and short reaction time.     

Eine cyclische Methylendiphosphinsäure: 1,3‐Dihydroxy‐1,3‐dioxo‐1,2,3,4‐tetrahydro‐1λ5,3λ5‐[1,3]diphosphinin

A Cyclic Methylenediphosphinic Acid: 1,3‐Dihydroxy‐1,3‐dioxo‐1,2,3,4‐tetrahydro‐1λ⁵,3λ⁵‐[1,3]diphosphinine Strong acids protonate 1,3‐bis(dimethylamino)‐1λ⁵,3λ⁵‐[1,3]diphosphinine ( 5 ) to give the corresponding cation. The protonation is followed by hydrolytic cleavage of the dimethylamino groups resulting in the formation of the cyclic methylenediphosphinic acid ( 6 ).     

New organo‐soluble aromatic polyimides based on 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride and aromatic diamines

New aromatic tetracarboxylic dianhydride, having isopropylidene and bromo‐substituted arylene ether structure 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride, was synthesized by the reaction of 4‐nitrophthalonitrile with 3,3′,5,5′‐tetrabromobisphenol A, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). The novel aromatic polyetherimides having inherent viscosities up to 1.04 dL g⁻¹ were obtained by either a one‐step or a conventional two‐step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), pyridine, and even in less polar solvents like chloroform and tetrahydrofuran (THF). These aromatic polyimides had glass transition temperatures in the range of 256–303°C, depending on the nature of the diamine moiety. Thermogravimetric analysis (TGA) showed that all polymers were stable, with 10% weight loss recorded above 470°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1673–1680, 1999     

A Facile Synthesis of Oxoindenothiazine and Dioxospiro(indene‐2,4′‐thiazine) Derivatives from (Substituted ethylidene)hydrazinecarbothioamides

(E)‐2‐[2‐(1‐Substituted ethylidene)hydrazinyl]‐5‐oxo‐9b‐hydroxy‐5,9b‐dihydroindeno[1,2‐d][1,3]‐thiazine‐4‐carbonitriles and (E)‐5‐oxo‐[(E)‐(1‐substituted ethylidene)hydrazinyl]‐2,5‐dihydroindeno[1,2‐d][1,3]thiazine‐4‐carbonitriles have been obtained from the reaction of 2‐(substituted ethylidene)hydrazinecarbothioamides with 2‐(1,3‐dioxo‐2,3‐dihydro‐1H‐inden‐2‐ylidene)propanedinitrile ( 1 ) in ethyl acetate solution. However, (Z)‐6′‐amino‐1,3‐dioxo‐3′‐substituted‐2′‐[(E)‐(1‐phenylethylidene)hydrazono]‐1,2′,3,3′‐tetrahydrospiro(indene‐2,4′‐[1,3]thiazine)‐5′‐carbonitriles were observed during the reaction of N‐substituted‐2‐(1‐phenylethylidene)hydrazinecarbothioamides with ( 1 ). The structure assignment of products has been confirmed on the basis of ¹H‐, ¹³C‐NMR, and mass spectrometry, as well as theoretical calculations.     

Synthesis of 1,3‐Dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates via Intramolecular Cyclization of 2‐[2‐(Dimethoxymethyl)phenyl]‐ 2‐hydroxyalkanoates Followed by Oxidation

A novel and efficient method for the preparation of 1,3‐dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates 4 under mild conditions has been developed. Thus, the reaction of [2‐(dimethoxymethyl)phenyl]lithiums, generated easily from 1‐bromo‐2‐(dimethoxymethyl)benzenes 1 , with α‐keto esters gives the corresponding 2‐[2‐(dimethoxymethyl)phenyl]‐2‐hydroxyalkanoates 2 . The TsOH‐catalyzed cyclization of these hydroxy acetals is followed by the oxidation of the resulting cyclic acetals 3 with PCC to give the desired products in satisfactory yields. The reaction of [2‐(dimethoxymethyl)‐4,5‐dimethoxyphenyl]lithium with (MeOC?O)₂, followed by treatment with NaBH₄ or organolithiums, affords 2‐[2‐(dimethoxymethyl)‐4,5‐dimethoxyphenyl]‐2‐hydroxyalkanoates 6 , which can similarly be transformed into the corresponding 1,3‐dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates 7 in reasonable yields.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

A three‐dimensional ZnII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands exhibiting photoluminescence

Ligands based on polycarboxylic acids are excellent building blocks for the construction of coordination polymers; they may bind to a variety of metal ions and form clusters, as well as extended chain or network structures. Among these building blocks, biphenyltetracarboxylic acids (H₄bpta) with C ₂ symmetry have recently attracted attention because of their variable bridging and multidentate chelating modes. The new luminescent three‐dimensional coordination polymer poly[(μ₅‐1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dizinc(II)], [Zn₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)]_n , was synthesized solvothermally and characterized by single‐crystal X‐ray diffraction, elemental analysis and IR spectroscopy. The crystal structure contains two crystallographically independent Zn^II cations. Both metal cations are located on twofold axes and display distorted tetrahedral coordination geometries. Neighbouring Zn^II centres are bridged by carboxylate groups in the syn –anti mode to form one‐dimensional chains. Adjacent chains are linked through 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands to form a three‐dimensional network. In the solid state, the compound exhibits blue photoluminescence and represents a promising candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

Poly(ethylene terephthalate) reinforced by N,N′‐diphenyl biphenyl‐3,3′,4,4′‐tetracarboxydiimide moieties

Starting with 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and methyl aminobenzoate, we synthesized a novel rodlike imide‐containing monomer, N,N′‐bis[p‐(methoxy carbonyl) phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BMBI). The polycondensation of BMBI with dimethyl terephthalate and ethylene glycol yielded a series of copoly(ester imide)s based on the BMBI‐modified poly(ethylene terephthalate) (PET) backbone. Compared with PET, these BMBI‐modified polyesters had higher glass‐transition temperatures and higher stiffness and strength. In particular, the poly(ethylene terephthalate imide) PETI‐5, which contained 5 mol % of the imide moieties, had a glass‐transition temperature of 89.9 °C (11 °C higher than the glass‐transition temperature of PET), a tensile modulus of 869.4 MPa (20.2 % higher than that of PET), and a tensile strength of 80.8 MPa (38.8 % higher than that of PET). Therefore, a significant reinforcing effect was observed in these imide‐modified polyesters, and a new approach to higher property polyesters was suggested. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 852–863, 2002; DOI 10.1002/pola.10169     

The Synthesis of Some New N‐[1‐(2,5‐Dichlorophenyl)‐5‐Methyl‐1,2,3‐Triazol‐4‐yl]‐Carbamic Acid Ester Derivatives

The synthesis of some new N‐[1‐(2,5‐dichlorophenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐carbamic acid ester derivatives are reported in this paper. The yielded products 6a‐l were confirmed by Elemental analyses, NMR, MS, and IR spectra.     

Syntheses,Structures, Electrochemistry,and Electrocatalysis of Three Copper(II) Coordination Polymers constructed from 5‐[4‐(1H‐Imidazol‐1‐yl)phenyl]‐1H‐tetrazole

Three coordination polymers (CPs) based on the 5‐[4‐(1H‐imidazol‐1‐yl)phenyl]‐1H‐tetrazole ( HL ) ligand, namely, [Cu(μ₂‐ L )(μ₄‐pbda)(H₂O)] ( 1 ), [Cu₂(μ‐Hbtc)(H₂btc)(μ₃‐OH)(μ₄‐ HL )] ( 2 ) and [Cu₅(μ₃‐ L )(μ₄‐ L )(μ₃‐ip)(μ₃‐OH)(H₂O)₂] · 2H₂O ( 3 ) (H₂pbda = 1,4‐benzenedicarboxylic acid, H₃btc = 1,3,5‐benzenetricarboxylic acid, H₂ip = isophthalic acid) were hydrothermally synthesized and structurally characterized. Complex 1 represents “weave”‐type 2D layers consisting of wave‐like 1D chains and 1D straight chains, which are further connected by hydrogen bonds to form a 3D supramolecular structure. Complex 2 exhibits a uninodal (4)‐connected 2D layer with a point symbol of {4⁴ · 6²}, in which the L ligand can be described as μ₅‐bridging and the H₂btc^– ions display multiple kinds of coordination modes to connect Cu^II ions into 1D “H”‐type Cu‐H₂btc chains. In complex 3 , 2D Cu‐ L layers with two kinds of grids and 1D “stair”‐type Cu‐ip chains link each other to construct a 3D {4¹² · 6³} framework, which contains the pentanuclear subunits. Deprotonated degree and coordination modes of carboxylate ligands may consequentially influence the coordination patterns of main ligands and the final structures of complexes 1 – 3 . Furthermore, electrochemical behaviors and electrocatalytic activities of the title complexes were analyzed at room temperature, suggesting practical applications in areas of electrocatalytic reduction toward nitrite and hydrogen dioxide in aqueous solutions, respectively.