Polyethylene Glycol Functionalized Magnetic Dicationic Ionic Liquids as a Novel Catalyst and Their Application in Ring Opening of Epoxides in Water

A simple and environmentally benign protocol for the aqueous synthesis of 1,2‐azidoalcohols via regioselective ring opening of 1,2‐epoxides using PEG‐MDIL as a novel magnetic phase transfer catalyst is described. The catalyst was studied by UV spectroscopy, IR spectroscopy, and thermogravimetric analysis. The reactions occur in water and furnish the corresponding azidoalcoholes in high yields. No evidence for the formation of by‐product and the products were obtained in pure form without further purification.     

Facile one‐pot synthesis of a series of 7‐aryl‐8H‐benzo[h]indeno[1,2‐b]quinoline‐8‐one derivatives catalyzed by cellulose‐based magnetic nanocomposite

A sulfonated magnetic cellulose‐based nanocomposite was applied as an efficient, inexpensive and green catalyst for the one‐pot three‐component synthesis of 7‐aryl‐8H ‐benzo[h ]indeno[1,2‐b ]quinoline‐8‐ones starting from 1,3‐indanedione, aromatic aldehydes and 1‐naphthylamine under solvent‐free conditions in high yields (79–98%) within short reaction times (2–5 min). The nanobiostructure catalyst can be easily separated from the reaction mixture by using an external magnet and reused several times.     

Asymmetric Hydrogenation of α-Hydroxy Ketones: A Reaction Sensitive toward Electronic Effect of Substrates

以[RuCl2(benzene)]2 和 SunPhos为原料现场制备的催化剂,催化不对称氢化α-羟基酮类化合物可获得手性1, 2-二醇类化合物,ee值最高达99%。     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

The kinetics of polycondensation of α,α′‐dichloro‐p‐xylene with 4,4′‐isopropylidenediphenol using benzyltriethylammonium chloride as a phase‐transfer catalyst

The phase‐transfer catalyzed polycondensation of α,α′‐dichloro‐p‐xylene with 4,4′‐isopropylidenediphenol was carried out using benzylethylammonium chloride in a two‐phase system of an aqueous alkaline solution and benzene at 60 °C under nitrogen atmosphere. The rate of polycondensation was expressed as the combined terms of quaternary onium cation and 4,4′‐isopropylidenediphenolate anion rather than the feed concentration of catalyst and 4,4′‐isopropylidenediphenol. The measured concentrations of hydroxide and chloride anion in the aqueous solution and α,α′‐dichloro‐p‐xylene in the organic phase were used to obtain the reaction rate constant with the integral method, and to analyze the polycondensation mechanism with a cyclic phase‐transfer initiation step in the heterogeneous liquid–liquid system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3059–3066, 2000     

Phosphomolybdic Acid (PMA)–SiO2 as a Heterogeneous Solid Acid Catalyst for the One‐Pot Synthesis of 2H‐Indazolo[1,2‐b]phthalazine‐triones

Phosphomolybdic acid (PMA)–SiO₂ was found to be an efficient catalyst for the three‐component condensation reaction of phthalhydrazide, 1,3‐diketone, and aldehydes to produce 2H‐indazolo[1,2‐b]phthalazine‐triones in excellent yields. The catalyst can be recovered and reused without significant loss of activity.     

Regioselective and 1,2‐cis‐α‐Stereoselective Glycosylation Utilizing Glycosyl‐Acceptor‐Derived Boronic Ester Catalyst

Regioselective and 1,2‐cis‐α‐stereoselective glycosylations using 1α,2α‐anhydro glycosyl donors and diol glycosyl acceptors in the presence of a glycosyl‐acceptor‐derived boronic ester catalyst. The reactions proceed smoothly to give the corresponding 1,2‐cis‐α‐glycosides with high stereo‐ and regioselectivities in high yields without any further additives under mild reaction conditions. In addition, the present glycosylation method was successfully applied to the synthesis of an isoflavone glycoside.     

Selective Synthesis of 1,2‐Diarylpyrrolo[3,4‐b]pyridine‐5,7‐diones via Cyclization Reaction of β‐Enamino Imides with Cinnamaldehydes

The novel 1,2‐diaryl substituted pyrrolo[3,4‐b]pyridine‐5,7‐diones were selectively synthesized in high yields by the base catalyzed cyclization reaction of 3‐arylamino‐1‐methyl‐1H‐pyrrole‐2,5‐diones with cinnamaldehyde and its derivatives in acetonitrile at room temperature. However, when piperidinium trifluoroacetate was employed as catalyst, the reaction afforded a mixture of 1,2‐diaryl and 1,4‐diaryl substituted pyrrolo[3,4‐b]pyridine‐5,7‐diones in comparable yields.     

α‐ZrP/Uracil/Cu2+ nanoparticles as an efficient catalyst in the Morita‐Baylis‐Hillman reaction

A facile synthesis of uracil‐Cu²⁺ nanoparticles immobilized on alpha‐zirconium hydrogen phosphate (α‐ZrP), abbreviated as α‐ZrP/Uracil/Cu²⁺, was presented. This compound was synthesized by the thermal method and used as a reusable catalyst for the Morita‐Baylis‐Hillman reaction without any additives. First, (3‐ iodopropyl) trimethoxysilane as a linker is reacted with α‐ZrP support to give the α‐ZrP/IPTMOS. Addition of uracil and then the addition of copper (II) acetate to α‐ZrP/IPTMOS results in the production of selected catalyst. The Morita‐Baylis‐Hillman reaction catalyzed by α‐ZrP/Uracil/Cu^{2 +} demonstrated high product yield, short reaction time and a straightforward work‐up. The catalyst with enough outside surface was easily recovered using centrifugation and reused five times without a significant reduction in its activity.     

Silica‐tethered cuprous acetophenone thiosemicarbazone (STCATSC) as a novel hybrid nano‐catalyst for highly efficient synthesis of new 1,2,3‐triazolyl‐based metronidazole hybrid analogues having potent antigiardial activity

The preparation, characterization and application of silica‐tethered cuprous acetophenone thiosemicarbazone (STCATSC) as a novel hybrid nano catalyst for synthesis of new 1,2,3‐triazolyl‐based metronidazole hybrid analogues is described. STCATSC is fully characterized by different microscopic, spectroscopic and physical techniques, including scanning electron microscopy (SEM), transmission, X‐ray diffraction (XRD), Energy‐dispersive X‐ray spectroscopy (EDS), thermogravimetric analysis (TGA), FT‐IR and inductively coupled plasma (ICP) analysis. This catalyst is used to prepare the new 1,2,3‐triazolyl‐based metronidazole hybrid analogues. The ‘Click’ Huisgen cycloaddition reaction of 2‐methyl‐5‐nitro‐1‐prop‐2‐ynyl‐1H‐imidazole with diverse β‐azidoalcohols in a THF‐water media at R.T. provides the products in good to excellent yields using STCATSC. STCATSC is proved to be a stable, low cost, reusable and environmentally benign hybrid catalyst. Products are in vitro tested against Giardia lamblia (G. lamblia) in which determined that all compounds exhibit varied promising antigiardial activity compare to metronidazole as a reference drug. Among the products, 1‐(4‐((2‐methyl‐5‐nitro‐1H‐imidazol‐1‐yl)methyl)‐1H‐1,2,3‐triazol‐1‐yl)‐3‐phenethoxypropan‐2‐ol and 1‐(4‐((2‐methyl‐5‐nitro‐1H‐imidazol‐1‐yl)methyl)‐1H‐1,2,3‐triazol‐1‐yl)‐3‐(3‐phenylpropoxy)propan‐2‐ol are demonstrated to exhibit the potent antigiardial activity even stronger than metronidazole.     

Synthesis of Some Novel Thioxanthenone‐Fused Azacrown Ethers,and Their Use as New Catalysts in the Efficient,Mild, and Regioselective Conversion of Epoxides to β‐Hydroxy Thiocyanates with Ammonium Thiocyanate

The regioselective ring‐opening reactions of some epoxides with ammonium thiocyanate in the presence of a series of new 9H‐thioxanthen‐9‐one‐fused azacrown ethers, i.e., 7 – 11 (Scheme 1), and also of dibenzo[18]crown‐6 ( 12 ), Kryptofix^® 22 ( 13 ), and benzo[15]crown‐5 ( 14 ) were studied (Tables 1 and 2). The epoxides were subjected to cleavage by NH₄SCN in the presence of these catalysts under mild conditions in various aprotic solvents. Reagents and conditions were identified for the synthesis of individual β‐hydroxy thiocyanates in high yield and with more than 90% regioselectivity. The results can be discussed in terms of a four‐step mechanism (Scheme 2): 1) formation of a complex between catalyst and NH₄SCN, 2) release of SCN^? from the complex, 3) reaction of the released SCN^? at the sterically less hindered site of the epoxide, and 4) regeneration of the catalyst. The major advantages of this method are the high regioselectivity, the simple regeneration of the catalyst, the reuse of it through several cycles without a decrease of activity, and the ease of workup of the reaction mixtures.     

Selectively Chemocatalytic Conversion of Fructose to 1,2‐Propylene Glycol over Ru‐WOx/Hydroxyapatite Catalyst†

The conversion of fructose to 1,2‐propylene glycol (PG) is an important process from cellulosic biomass to high‐value added chemicals. Herein, Ru‐WO_x/hydroxyapatite (HAP) catalyst was employed for this reaction and reached up to 91.3% yield of PG at 180 °C, 1 MPa initial hydrogen for 8 h in water. On this catalyst, Ru and WO_x were highly dispersed on HAP support and they interacted with each other to form a special catalytic center. The lack of isolated Ru or RuW alloy site led to a moderate activity for hydrogenolysis and hindered the further conversion of PG to propanol. The weak basic HAP support efficiently prevented the humin formation. This precisely controlled catalyst has potential in green PG production.     

Selective α-Bromination of β-Keto Esters in Reusable PEG-400 under Mild and Catalyst-free Conditions

An efficient bromination protocol for the synthesis of α-bromo-β-keto esters has been developed. In PEG-400 （poly（ethylene glycol-400））, a variety of β-keto esters were treated with NBS （N-bromosuccinimide） at room temperature to selectively afford the corresponding α-monobromination products in excellent yields. It is noteworthy that the reaction was conducted under mild, environmentally benign and catalyst-free conditions.     

One‐Pot Synthesis of Novel Pyrrolo[1,2‐a]quinoxaline‐4(5H)‐ones Using Benzene‐1,2‐diamine,Acetylenedicarboxylates, and β‐Nitrostyrene Derivatives

The reaction between a variety of o‐phenylenediamines (=benzene‐1,2‐diamines), dialkyl acetylenedicarboxylates, and derivatives of nitrostyrene (=(E)‐(2‐nitroethenyl)benzene) in the presence of sulfamic acid (SA; H₃NSO₃) as catalyst led to the corresponding pyrrolo[1,2‐a]quinoxaline‐4(5H)‐one derivatives in high yields.     

Chiral Ammonium Betaine‐Catalyzed Highly Stereoselective Aza‐Henry Reaction of α‐Aryl Nitromethanes with Aromatic N‐Boc Imines

A highly stereoselective aza‐Henry reaction of α‐aryl nitromethanes with aromatic N‐Boc imines was established by using C₁‐symmetric chiral ammonium betaine as a bifunctional organic base catalyst. Various substituted aryl groups for both imines and nitromethanes were tolerated in the reaction, and a series of precursors for the synthesis of unsymmetrical anti‐1,2‐diaryl ethylenediamines was provided.     

Synthesis of i‐PP‐based functional block copolymer by a facile combination of styryl‐capped i‐PP and ATRP

This article demonstrates a facile and efficient method to combine olefin coordination polymerization with atom transfer radical polymerization (ATRP) for the synthesis of isotactic polypropylene (i‐PP)‐based functional diblock copolymers. The chemistry involves a styryl‐capped i‐PP precursor prepared through the controlled consecutive chain transfer reaction, first to 1,2‐bis(4‐vinylphenyl)ethane and then to hydrogen in propylene polymerization mediated by an isospecific metallocene catalyst. The i‐PP precursor can be quantitatively transformed into i‐PP terminated with a 1‐chloroethylbezene group (i‐PP‐t‐Cl) by a straightforward hydrochlorination process using hydrogen chloride. With the resultant i‐PP‐t‐Cl as a macroinitiator of ATRP, methyl methacrylate (MMA) polymerization was exemplified in the presence of CuBr/pentamethyldiethylenetriamine, preparing i‐PP‐b‐PMMA copolymers of different PMMA contents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Reactions of Polymer‐Supported α‐Selenoaldehydes with Grignard Regents. A Facile Solid‐Phase Stereoselective Synthesis of (E)‐1,2‐Disubstituted Ethenes

Polymer‐supported α‐selenoaldehydes easily obtained by reaction of polymer‐supported 4‐(phenylseleno)morpholine with aldehydes react with Grignard reagents to form polymer‐supported β‐hydroxyalkyl selenides, which were treated with thionyl chloride/triethylamine leading to (E)‐1,2‐disubstituted ethenes in good yields.     

Revisiting the Hinsberg Reaction: Facile and Expeditious Synthesis of 3‐Substituted Quinoxalin‐2(1H)‐ones under Catalyst‐Free Conditions in Water

Substituted benzene‐1,2‐diamine reacted with various α‐keto esters at 50° under mild conditions for 15 min using H₂O as reaction medium, providing a variety of 3‐substituted quinoxalinone derivatives in excellent yields. The reaction was instantaneous, and products were isolated by simple filtration.     

(3‐Oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) functionalized magnetic γ‐Fe2O3 nanoparticles: A novel and heterogeneous nanocatalyst for one‐pot and efficient four‐component synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives

The efficient synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives via the four‐component condensation of amines, ninhydrin, isatoic anhydride, and о‐phenylenediamine derivatives catalyzed by ( 3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) supported on γ‐Fe₂O₃ as novel heterogenous magnetic nanocatalyst was described. The novel nanocatalyst was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), vibrating sample magnetometry (VSM), Field Emission Scanning Electron Microscopy (FE‐SEM), and thermal analysis (TGA‐DTG). The nanoparticles covered by (3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) showed enhanced catalytic performance in the preparation of spiro[indeno[1,2‐b]quinoxaline derivatives in excellent yields. Moreover, this method showed several advantages such as mild conditions, high yields, easy work‐up, and being environmentally friendly. The catalyst can be easily separated from the reaction mixture by an external magnet, recycled, and reused several times without a noticeable decrease in catalytic activity.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).