Determination of the binding constants of modafinil enantiomers with sulfated β‐cyclodextrin chiral selector by capillary electrophoresis using three different linear plotting methods

Binding constants for the enantiomers of modafinil with the negatively charged chiral selector sulfated‐β‐CD (S‐β‐CD) using CE technique is presented. The calculations of the binding constants employing three different linearization plots (double reciprocal, X‐reciprocal and Y‐reciprocal) were performed from the electrophoretic mobility values of modafinil enantiomers at different concentrations of S‐β‐CD in the BGE. The highest inclusion affinity of the modafinil enantiomers were observed for the S‐enantiomer–S‐β‐CD complex, in agreement with the computational calculations performed previously. Binding constants for each enantiomer–S‐β‐CD complex at different temperatures, as well as thermodynamic parameters for binding, were calculated. Host–guest binding constants using the double reciprocal fit showed better linearity (r²>0.99) at all temperatures studied (15–30°C) and compared with the other two fit methods. The linear van't Hoff (15–30°C) plot obtained indicated that the thermodynamic parameters of complexation were temperature dependent for the enantiomers.     

Capillary electrophoretic enantioseparation of m‐nisoldipine using two different β‐cyclodextrins

The methods for the enantioseparation of m‐nisoldipine, a new 1,4‐dihydropyridine calcium ion antagonist, were developed. The elaborated methods of m‐nisoldipine enantiomers separation were successfully performed using an anionic CD–sulfobutyl ether‐β‐CD (SBE‐β‐CD) or carboxymethyl‐β‐CD as chiral selector. However, the results indicated that SBE‐β‐CD was a better chiral selector for enantioseparation of the neutral m‐nisoldipine. Furthermore, comparing the two SBE‐β‐CDs, the derivative with a higher degree of substitution (DS) of 7.0 induced better enantioresolution than the one with low DS (4.0). In addition, possible chiral recognition mechanisms of dihydropyridines were discussed.     

New single isomer negatively charged β‐cyclodextrin derivatives as chiral selectors in capillary electrophoresis

To improve resolution power of chiral selector and enantiomeric peak efficiency in CE, single isomer negatively charged β‐CD derivatives, mono(6‐deoxy‐6‐sulfoethylthio)‐β‐CD (SET‐β‐CD) bearing one negative charge and mono[6‐deoxy‐6‐(6‐sulfooxy‐5,5‐bis‐sulfooxymethyl)hexylthio]‐β‐CD (SMHT‐β‐CD) carrying three negative charges, were synthesized. The structure of these two β‐CD derivatives was confirmed by ¹H NMR and MS. SET‐β‐CD and SMHT‐β‐CD successfully resolved the enantiomers of several basic model compounds. SMHT‐β‐CD provided for a significantly greater enantioseparation than SET‐β‐CD at lower concentrations. This appears to be due to the higher binding affinity of SMHT‐β‐CD to the model compounds and the wider separation window resulting from an increased countercurrent mobility of the selector. Overall, the new chiral selectors provided enantioseparations with high peak efficiency while avoiding peak distortion due to polydispersive and electrodispersive effects. The information obtained from an apparent binding constant study suggested that the enantioseparation of the model compounds followed the predictions of charged resolving agent migration model and that the observed degree of enantioseparation difference were due to the magnitude of differences in both enantiomer‐chiral selector binding affinities (ΔK) and the mobilities of the complexed enantiomers (Δμ_c).     

Preparation of chiral oxazolinyl‐functionalized β‐cyclodextrin‐bonded stationary phases and their enantioseparation performance in high‐performance liquid chromatography

A simple procedure for the synthesis of three new oxazolinyl‐substituted β‐cyclodextrins (6‐deoxy‐6‐R‐(–)‐4‐phenyl‐4,5‐dihydrooxazolinyl‐β‐cyclodextrin, 6‐deoxy‐6‐S‐(–)‐4‐phenyl‐4,5‐dihydrooxazolinyl‐β‐cyclodextrin, and 6‐deoxy‐6‐S‐(–)‐(4‐pyridin‐1‐ium‐4‐methyl‐benzenesulphonate)‐4,5‐dihy‐drooxazolinyl‐β‐cyclodextrin) and their covalent bonding to silica are reported. The ability of these chiral stationary phase columns for separating compounds is also presented and discussed. Twenty‐eight compounds were examined in the polar‐organic mobile phase mode, and 11 β‐nitroethanols were tested in the reversed‐phase mode. Excellent enantioseparations were achieved for most of the analytes, even for several challenging compounds. The rigid and flexible structures of mono‐substituted chiral groups and the fragments around the rim of the β‐cyclodextrin cavity played an important role in the separation process. Factors such as π–π stacking, dipole–dipole interactions, ion‐pairing, and steric hindrance effects were found to affect the chromatographic performance. Moreover, the buffer composition, and percentages of organic modifiers in the mobile phase, were investigated and compared. The mechanisms involved in the separation were postulated based on the chromatographic data.     

Enantioseparation of chiral benzimidazole derivatives by electrokinetic chromatography using sulfated cyclodextrins

Baseline separation of 18 new substituted benzimidazole derivatives, potent AMP‐activated protein kinase (AMPK) activators, with one chiral center, was achieved by CD‐EKC using sulfated and highly sulfated CDs (SCDs and HS‐CDs) as chiral selectors. The influence of the type and concentration of the chiral selectors on the enantioseparations was investigated. The SCDs exhibit a very high enantioselectivity power since they allow excellent enantiomeric resolutions compared to those obtained with the neutral CDs. The enantiomers were resolved with analysis times around 6 min using 25 mM phosphate buffer at pH 2.5 containing either β‐S‐CD, HS‐β‐CD, HS‐γ‐CD (3 or 4% w/v) at 25°C, with a voltage of 20 kV. The apparent association constants of the inclusion complexes were calculated. The study of the solute structure‐enantioseparation relationships seems to show the high contribution of the interactions between the solutes phenyl ring and the CDs to the enantiorecognition process. The optimized method was briefly validated (LOD less than 1%) and the purity of enantiomers of compound 3 was determined. The enantiomer migration shows reversal order depending on the kind of CD.     

The degree of substitution affects the enantioselectivity of sulfobutylether‐β‐cyclodextrin chiral stationary phases

Three chiral stationary phases were prepared by dynamic coating of sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD) with different degrees of substitution, onto strong anion‐exchange stationary phases. The enantioselective potential and stability of newly prepared chiral stationary phases were examined using a set of structurally different chiral analytes. Measurements were performed in RP‐HPLC. Mobile phases consisted of methanol/formic acid, pH 2.10, and methanol/10 mM ammonium acetate buffer, pH 4.00, in various volume ratios. SBE‐β‐CDs with degrees of substitution (DS) 4, 6.3, and 10 proved suitable for the enantioseparation of 14, 11, and 8 analytes, respectively. The SBE‐β‐CD DS 4 based chiral stationary phase enabled the enantioseparation of the nearly all basic and neutral compounds. Chiral stationary phases with higher sulfobutylether‐β‐cyclodextrin substitution (especially DS 10) yielded higher enantioresolution values for acidic compounds.     

The study of enantioselectivity of all regioisomers of mono‐carboxymethyl‐β‐cyclodextrin used as chiral selectors in CE

This work documents the influence of the position of single carboxymethyl group on the β‐cyclodextrin skeleton on the enantioselectivity. These synthesized monosubstituted carboxymethyl cyclodextrin (CD) derivatives, native β‐cyclodextrin, and commercially available carboxymethyl‐β‐cyclodextrin with degree of substitution approximately 3 were used as additives into the BGE consisting of phosphate buffer at 20 mmol/L concentration, pH 2.5, and several biologically significant low‐molecular‐mass chiral compounds were enantioseparated by CE. The results indicate that different substituent location on β‐cyclodextrin skeleton has a significant influence on the enantioseparation of the investigated enantiomers. The enantioselectivity of 2^I‐O‐regioisomer was better than with native β‐cyclodextrin. Comparable results to native β‐cyclodextrin were obtained for 6^I‐O‐ regioisomer and the enantioselectivity of 3^I‐O‐regioisomer was even worse than with native β‐cyclodextrin. Commercially available derivative of CD provides better resolutions than the monosubstituted carboxymethyl CD derivatives for most of the investigated analytes.     

A family of single‐isomer,dicationic cyclodextrin chiral selectors for capillary electrophoresis: Mono‐6A‐ammonium‐6C‐butylimidazolium‐β‐cyclodextrin chlorides

The first member of the single‐isomer, dicationic cyclodextrin (CD) family, 6^A‐ammonium‐6^C‐butylimidazolium‐β‐cyclodextrin chlorides (AMBIMCD), has been synthesized, analytically characterized, and used to separate a variety of acidic enantiomers and amino acids by CE. Starting from mono‐6^A‐azido‐β‐cyclodextrin, the cationic imidazolium and ammonium moieties were subsequently introduced onto primary ring of β‐cyclodextrin via nucleophilic addition and Staudinger reaction. The analytically pure AC regio‐isomer CD was further obtained via column chromatography. This dicationic CD exhibited excellent enantioselectivities for selected analytes at concentration as low as 0.5 mM, which were even better than those of its mono‐imidazolium or ammonium‐substitued counterpart CDs at 10 equivalent concentrations. The effective mobilities of all studied analytes were found to decrease with the concentration of AMBIMCD. Inclusion complexation in combination with eletrostatic interactions seemed to account for the enhanced chiral discrimination process.     

Inverse cationic ITP for separation of methadone enantiomers with sulfated β‐cyclodextrin as chiral selector

Chiral ITP of the weak base methadone using inverse cationic configurations with H⁺ as leading component and multiple isomer sulfated β‐CD (S‐β‐CD) as leading electrolyte (LE) additive, has been studied utilizing dynamic computer simulation, a calculation model based on steady‐state values of the ITP zones, and capillary ITP. By varying the amount of acidic S‐β‐CD in the LE composed of 3‐morpholino‐2‐hydroxypropanesulfonic acid and the chiral selector, and employing glycylglycine as terminating electrolyte (TE), inverse cationic ITP provides systems in which either both enantiomers, only the enantiomer with weaker complexation, or none of the two enantiomers form cationic ITP zones. For the configuration studied, the data reveal that only S‐methadone migrates isotachophoretically when the S‐β‐CD concentration in the LE is between about 0.484 and 1.113 mM. Under these conditions, R‐methadone migrates zone electrophoretically in the TE. An S‐β‐CD concentration between about 0.070 and 0.484 mM results in both S‐ and R‐methadone forming ITP zones. With >1.113 mM and < about 0.050 mM of S‐β‐CD in the LE both enantiomers are migrating within the TE and LE, respectively. Chiral inverse cationic ITP with acidic S‐β‐CD in the LE is demonstrated to permit selective ITP trapping and concentration of the less interacting enantiomer of a weak base.     

Separation and Determination of Cold Medicine Ingredients by Capillary Zone Electrophoresis Using Sulfated β‐Cyclodextrin as an Electrolyte Modifier and Chiral Selector

Capillary zone electrophoretic separations of cold medicine ingredients, including acetaminophen (AC), dextromethorphan (DMF) and racemates of phenylpropanolamine (PPA) and chlorpheniramine maleate (CPM) using randomly sulfated‐β‐CD (S‐β‐CD) as an electrolyte modifier and a chiral selector were investigated. The results indicate that S‐β‐CD is an excellent chiral selector and a suitable electrolyte modifier as well for the separation of those cold medicine ingredients. Influences of S‐β‐CD concentration and buffer concentration on the separation were examined. Baseline separation of these cold medicine ingredients with 1.0 % (w/v) S‐β‐CD could be simultaneously and successfully achieved within 11.8 minutes. In addition, S‐β‐CD could also act as a chiral selector for enantioseparation of PPA and CPM. A high enantioselectivity was obtained for these two analytes. Linear relationships between the peak area and its concentration for the calibration curves of AC and DMF were obtained (correlation coefficients: 0.9987 for AC, 0.9965 for DMF, respectively). The relative standard deviations of the migration time and peak area of AC and DMF were 0.19, 2.44 % and 0.34, 2.99 %, respectively. Detection limits were 0.93 and 2.57 μg/mL for AC and DMF, respectively. Recoveries of AC and DMF ranging between 102.42 and 97.28 % were observed. The proposed method was successfully applied to the determination of AC and DMF in cold medicines.     

6‐TIPS‐β‐Cyclodextrin‐Modified Fe3O4 for Facile Enantioseparation of 1‐(1‐Naphthyl)ethylamine

A new type of chiral magnetic nanoparticle was prepared from covalently linked magnetic nanoparticles (Fe₃O₄) and heptakis‐(6‐O‐triisopropylsilyl)‐β‐cyclodextrin (6‐TIPS‐β‐CD). The resulting selectors (TIPS‐β‐CD‐MNPs) combined the good magnetic properties Fe₃O₄ and efficient chiral recognition ability of 6‐TIPS‐β‐CD. The enantioselectivity of TIPS‐β‐CD‐MNPs towards 1‐(1‐naphthyl)ethylamine was six times higher than that of the parent β‐CD modified Fe₃O₄ particles.     

Chiral discrimination of β‐3‐homo‐amino acids using the kinetic method

Chiral discrimination of seven enantiomeric pairs of β‐3‐homo‐amino acids was studied by using the kinetic method and trimeric metal‐bound complexes, with natural and unnatural α‐amino acids as chiral reference compounds and divalent metal ions (Cu²⁺ and Ni²⁺) as the center ions. The β‐3‐homo‐amino acids were selected for this study because, first of all, chiral discrimination of β‐amino acids has not been extensively studied by mass spectrometry. Moreover, these β‐3‐homo‐amino acids studied have different aromatic side chains. Thus, the emphasis was to study the effect of the side chain (electron density of the phenyl ring, as well as the difference between phenyl and benzyl side chains) for the chiral discrimination. The results showed that by the proper choice of a metal ion and a chiral reference compound, all seven enantiomeric pairs of β‐3‐homo‐amino acids could be differentiated. Moreover, it was noted that the β‐3‐homo‐amino acids with benzyl side chains provided higher enantioselectivity than the corresponding phenyl ones. However, increasing or decreasing the electron density of the aromatic ring by different substituents in both the phenyl and benzyl side chains had practically no role for chiral discrimination of β‐3‐homo‐amino acids studied. When copper was used as the central metal, the phenyl side chain containing reference molecules (S)‐2‐amino‐2‐phenylacetic acid (L ‐Phg) and (S)‐2‐amino‐2‐(4‐hydroxyphenyl)‐acetic acid (L ‐4′‐OHPhg) gave rise to an additional copper‐reduced dimeric fragment ion, [Cu^I(ref)(A)]⁺. The inclusion of this ion improved noticeably the enantioselectivity values obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Separation of brombuterol enantiomers in capillary electrophoresis with cyclodextrin‐type chiral selectors and investigation of structure of selector‐selectand complexes using nuclear magnetic resonance spectroscopy

The major goal of this study was to determine the affinity pattern of brombuterol (BB) enantiomers toward various cyclodextrins (CD) and to evaluate the potential of NMR spectroscopy for understanding fine mechanisms of interactions between CDs and BB enantiomers. Separation of BB enantiomers was performed in a fused‐silica capillary using a phosphate buffer, pH 2.5, at the room temperature in the normal polarity mode. It was shown once again that CE in combination with NMR spectroscopy represents a very sensitive tool for studies of affinity patterns and structure of CD complexes with chiral guests. Although opposite affinity patterns of BB enantiomers were observed toward native β‐ and γ‐CDs, no significant differences between the structures of the complexes of these two CDs with BB were detected by NMR spectroscopy. In contrary to this, the opposite affinity pattern of BB enantiomers toward β‐CD and its two sulfated derivatives, heptakis (2,3‐O‐diacetyl‐6‐sulfo)‐β‐CD (HDAS‐β‐CD) and heptakis (2‐O‐methyl‐3,6‐di‐O‐sulfo)‐β‐CD (HMDS‐β‐CD) was associated with major differences in the structure of the complexes. In addition, it was shown again that HMDS‐β‐CD provides separation of enantiomers without formation of inclusion‐type complex with the chiral analyte.     

Asymmetric Substitutions of 2‐Lithiated N‐Boc‐piperidine and N‐Boc‐azepine by Dynamic Resolution

Proton abstraction of N‐tert‐butoxycarbonyl‐piperidine (N‐Boc‐piperidine) with sBuLi and TMEDA provides a racemic organolithium that can be resolved using a chiral ligand. The enantiomeric organolithiums can interconvert so that a dynamic resolution occurs. Two mechanisms for promoting enantioselectivity in the products are possible. Slow addition of an electrophile such as trimethylsilyl chloride allows dynamic resolution under kinetic control (DKR). This process occurs with high enantioselectivity and is successful by catalysis with substoichiometric chiral ligand (catalytic dynamic kinetic resolution). Alternatively, the two enantiomers of this organolithium can be resolved under thermodynamic control with good enantioselectivity (dynamic thermodynamic resolution, DTR). The best ligands found are based on chiral diamino‐alkoxides. Using DTR, a variety of electrophiles can be used to provide an asymmetric synthesis of enantiomerically enriched 2‐substituted piperidines, including (after Boc deprotection) the alkaloid (+)‐β‐conhydrine. The chemistry was extended, albeit with lower yields, to the corresponding 2‐substituted seven‐membered azepine ring derivatives.     

Enantioseparation of pheniramine enantiomers by high‐speed countercurrent chromatography using β‐cyclodextrin derivatives as a chiral selector

The enantioselective separation of pheniramine was studied by a high‐speed countercurrent chromatography method using β‐cyclodextrin derivatives as a chiral selector. Several key variables, for instance, type of organic solvent and chiral selector, concentration of chiral selector, pH value of aqueous phase, and temperature on the enantioselectivity, were investigated systematically by liquid–liquid extraction experiments. Combining the results of extraction experiments and high‐speed countercurrent chromatography, the most suitable conditions for separation of pheniramine enantiomers were obtained with the two‐phase system that consisted of isobutyl acetate/aqueous phase, containing 0.02 mol/L carboxymethyl‐β‐cyclodextrin, pH 8.50 at 278.15 K. Under the optimal conditions, pheniramine enantiomer was successfully resolved after four cycles of high‐speed countercurrent chromatography. By using high‐performance liquid chromatography to analyze the fractions, the purities of both (+)‐pheniramine and (–)‐pheniramine were over 99% and the recovery of this method was up to 85–90%.     

Effect of urea on analyte complexation by 2,6‐dimethyl‐β‐CD in peptide enantioseparations by CE

The aim of the present study was the investigation of the effect of urea on analyte complexation in CD‐mediated separations of peptide enantiomers by CE in the pH range of about 2–5. pH‐independent complexation and mobility parameters in the absence and presence of 2 M urea were obtained by three‐dimensional, non‐linear curve fitting of the effective analyte mobility as a function of pH and heptakis‐(2,6‐di‐O‐methyl)‐β‐CD concentration. Urea led to decreased binding strength of the CD towards the protonated and neutral analyte enantiomers as well as to decreased mobilities of the free analytes. In contrast, mobilities of the fully protonated enantiomer–CD complexes as well as the pK_a values of the free and complexed analytes increased. The effect of urea on separation efficiency varied with pH and CD concentration. In the case of Ala‐Tyr and Ala‐Phe, separations improved in the presence of urea at pH 2.2. In contrast, separations were impaired by urea at pH 3.8 and low concentrations of the CD. Decreased separation efficiency was noted for Asp‐PheOMe and Glu‐PheNH₂ at low CD concentrations when urea was added but separations improved at higher CD concentrations over the entire pH range studied. The effect of urea on analyte complexation appeared to be primarily non‐stereoselective. Furthermore, the pH‐dependent reversal of the enantiomer migration order observed for Ala‐Tyr and Ala‐Phe can be rationalized by the complexation and mobility parameters.     

Chiral capillary electrophoresis with cationic pyrrolidinium‐β‐cyclodextrin derivatives as chiral selectors

New single‐isomer, cationic β‐cyclodextrins, including mono‐6‐deoxy‐6‐pyrrolidine‐β‐cyclodextrin chloride (pyCDCl), mono‐6‐deoxy‐6‐(N‐methyl‐pyrrolidine)‐β‐cyclodextrin chloride (N‐CH₃‐pyCDCl), mono‐6‐deoxy‐6‐(N‐(2‐hydroxyethyl)‐pyrrolidine)‐β‐cyclodextrin chloride (N‐EtOH‐pyCDCl), mono‐6‐deoxy‐6‐(2‐hydroxymethyl‐pyrrolidine)‐β‐cyclodextrin chloride (2‐MeOH‐pyCDCl) were synthesized and used as chiral selectors in capillary electrophoresis for the enantioseparation of carboxylic and hydroxycarboxylic acids and dansyl amino acids. The unsubstituted pyCDCl exhibited the greatest resolving ability. Most analytes were resolved over a wide range of pH from 6.0 to 9.0 with this chiral selector. In general, increasing pH led to a decrease in resolution. The effective mobilities of all the analytes were found to decrease with increasing CD concentration. The optimal concentration for most carboxylic acids and dansyl amino acid was in the range 5–7.5 mM and >15 mM for hydroxycarboxylic acids. ¹H NMR experiments provided direct evidence of inclusion in the CD cavity.     

Enantiomeric separation of oxybutynin by recycling high‐speed counter‐current chromatography with hydroxypropyl‐β‐cyclodextrin as chiral selector

Recycling high‐speed counter‐current chromatography was successfully applied to the preparative separation of oxybutynin enantiomers. The two‐phase solvent system consisted of n‐hexane, methyl tert‐butyl ether, and 0.1 mol/L phosphate buffer solution (pH = 5.0) with the volume ratio of 6:4:10. Hydroxypropyl‐β‐cyclodextrin was employed as the chiral selector. The influence of factors on the chiral separation process, including the concentration of chiral selector, the equilibrium temperature, the pH value of the aqueous phase were investigated. Under optimum separation conditions, 15 mg of oxybutynin racemate was separated with the purities of both the enantiomers over 96.5% determined by high‐performance liquid chromatography. Recovery for the target compounds reached 80–82% yielding 6.00 mg of (R)‐oxybutynin and 6.15 mg of (S)‐oxybutynin. Technical details for recycling elution mode were discussed.     

Combined use of l‐alanine tert butyl ester lactate and trimethyl‐β‐cyclodextrin for the enantiomeric separations of 2‐arylpropionic acids nonsteroidal anti‐inflammatory drugs

In this study, a new CE method, employing a binary system of trimethyl‐β‐CD (TM‐β‐CD) and a chiral amino acid ester‐based ionic liquid (AAIL), was developed for the chiral separation of seven 2‐arylpropionic acid nonsteroidal anti‐inflammatory drugs (NSAIDs). In particular, the enantioseparation of ibuprofen, ketoprofen, carprofen, indoprofen, flurbiprofen, naproxen, and fenoprofen was improved significantly by supporting the BGE with the chiral AAIL l ‐alanine tert butyl ester lactate (l ‐AlaC₄Lac). Parameters, such as concentrations of TM‐β‐CD and l ‐AlaC₄Lac, and buffer pH, were systematically examined in order to optimize the chiral separation of each NSAID. It was observed that the addition of the AAIL into the BGE improved both resolution and efficiency significantly. After optimization of separation conditions, baseline separation (R_s>1.5) of five of the analytes was achieved in less than 11 min, while the resolution of ibuprofen and flurbiprofen was approximately 1.2. The optimized enantioseparation conditions for all analytes involve a BGE of 5 mM sodium acetate/acetic acid (pH 5.0), an applied voltage of 30 kV, and a temperature of 20°C. In addition, the results obtained by computing the %‐RSD values of the EOF and the two enantiomer peaks, demonstrated excellent run‐to‐run, batch‐to‐batch, and day‐to‐day reproducibilities.     

Cyclodextrin‐modified capillary electrophoresis for achiral and chiral separation of ergostane and lanostane compounds extracted from the fruiting body of Antrodia camphorata

A CD‐modified capillary electrophoretic method has been developed for achiral and chiral analysis of seven bioactive compounds isolated from the fruiting body of Antrodia camphorata. Such important target analytes exhibit similar chemical structures and are known for their diverse properties including antioxidant and anticancer effects. The analytes were separated in 25 min using a pH 9.3, 20 mM sodium borate buffer containing 20 mM methyl‐β‐CD and 30 mM sulfobutylether‐β‐CD. With the exception of the optical isomer pairs (antcin B or zhankuic acid A, zhankuic acid C, and antcin A), the remaining bioactive compounds including the chiral pair antcin C were baseline‐separated. Analysis time was noticeably longer to baseline separate all of the above chiral pairs (～38 min) by adding 5% DMF to the running buffer. The migration order was reversed compared with the HPLC elution. More hydrophobic compounds complexed favorably with methyl‐β‐CD and emerged earlier in the electropherogram than their more hydrophilic counterparts which were strongly associated with sulfobutylether‐β‐CD. The simple capillary electrophoretic method developed was applicable for rapid separation and characterization of several important bioactive compounds isolated from the fruiting body of A. camphorata.