Effect of temperature on the enantioselectivity of basic analytes using CE with sulfated β‐cyclodextrins

Twelve basic analytes, including ephedrine and its structurally related compounds, were used to study the influence of capillary temperature on enantioselectivity in CE enantioseparations under reversed polarity mode using sulfated β‐CD (S‐β‐CD) as chiral selectors. All of the effective mobility changes of (+)‐enantiomers between 35 and 20°C were higher than those of (–)‐enantiomers whosoever enantioselectivity increased or decreased with an increase in temperature. However, the unusual temperature effect that enantioselectivity was increased with an increase of temperature was observed for the compounds with hydroxyl substitution on phenyl ring and had relationship with the molecular structures. With performing NMR studies on the selected selector‐analyte complexes, the results led to a deeper understanding of the chiral discrimination process. Inspection of the complexation‐induced chemical shifts (CICS) of the enantiomers showed that the phenyl ring sits deeply and slantways in the cavity of S‐β‐CD and alkyl chain pointed out of the wider rim of S‐β‐CD with ion–ion and hydrogen bond interactions between analytes and S‐β‐CD.     

Combined use of ionic liquid and β‐CD for enantioseparation of 12 pharmaceuticals using CE

In this study, the enantioseparation of zopiclone, repaglinide, chlorphenamine maleate, brompheniramine maleate, dioxopromethazine hydrochloride, promethazine hydrochloride, liarozole, carvedilol, homatropine hydrobromide, homatropine methylbromide, venlafaxine, and sibutramine hydrochloride has been investigated using β‐CD in combination with a chiral ionic liquid (IL), 1‐ethyl‐3‐methylimidazolium‐L‐lactate. The influence of the type of IL and its concentration, BGE pH, and chain length of the IL cations on the resolution are discussed. Finally, the proposed method was successfully applied for the chiral impurity determination of eszopiclone in pharmaceutical tablets after validation with respect to accuracy and precision, linearity range, selectivity, repeatability, LOD and LOQ. It is assessed that the chiral impurity determination in the commercial tables is fewer than 0.1%.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Development of a fast and efficient CE enzyme assay for the characterization and inhibition studies of α‐glucosidase inhibitors

The inhibition of the α‐glucosidase enzyme plays an important role in the treatment of diabetes mellitus. We have established a highly sensitive, fast, and convenient CE method for the characterization of the enzyme and inhibition studies of α‐glucosidase inhibitors. The separation conditions were optimized; the pH value and concentration of the borate‐based separation buffer were optimized in order to achieve baseline separation of p‐nitrophenyl‐α‐d ‐glucopyranoside and p‐nitrophenolate. The optimized method using 25 mM tetraborate buffer, pH 9.5, was evaluated in terms of repeatability, LOD, LOQ, and linearity. The LOD and LOQ were 0.32 and 1.32 μM for p‐nitrophenyl‐α‐d ‐glucopyranoside and 0.83 and 3.42 μM for p‐nitrophenolate, respectively. The value of the Michaelis–Menten constant (K_m) determined for the enzyme is 0.61 mM, which is in good agreement with the reported data. The RSDs (n = 6) for the migration time was 0.67 and 1.83% for substrate and product, respectively. In the newly established CE method, the separation of the reaction analytes was completed in <4 min. The developed CE method is rapid and simple for measuring enzyme kinetics and for assaying inhibitors.     

Determination of surface ζ‐potential and isoelectric point of carbon surfaces using tracer particle suspensions

Carbon materials are widely used in a range of applications from biomaterials to sensing and electronics. Many of these applications rely on the ability to control carbon/water interfacial properties, in particular, surface charge density. This work reports a study of the electrokinetic properties of amorphous carbon thin films as a function of pH and surface chemistry. Surface ζ‐potential (SZP) and isoelectric point were determined using the tracer particle method. Initially, the use of sulfonated and amine‐terminated latex bead suspensions as tracer particles for the determination of SZP of reference polymer surfaces was validated. The tracer particle method was then applied to the determination of SZP and isoelectric point of macroscopic carbon surfaces with different surface chemistry. Highly graphitic and sp³‐rich hydrogenated carbon surfaces were found to display negative SZP, as expected for hydrophobic surfaces. The isoelectric point of the most highly graphitic surface was found to be pH_iso = 3.7. Surface oxidation of these films resulted in a decrease of SZP at all pH values and in a downshift of pH_iso to values lower than 1.5, consistently with the presence of surface acidic groups arising from oxidation. Results indicate that the specific choice of acid/base chemistry for the tracer particles does not significantly affect either SZP or pH_iso determinations. These results show that the tracer particle method in combination with widely available latex beads as tracers can be applied for the determination of carbon SZP as a function of pH. Copyright © 2017 John Wiley & Sons, Ltd.     

The Renaissance of α‐Methylene‐γ‐butyrolactones: New Synthetic Approaches

The amount of research activity concerning α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones has increased dramatically in recent years. This Review summarizes the structural types, biological activities, and biosynthesis of these compounds, concentrating on publications from the past 10 years. Traditional approaches to α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones are then reviewed together with novel approaches, including those from our own research group, reported more recently.     

Folding Dynamics of 10‐Residue β‐Hairpin Peptide Chignolin

Short peptides that fold into β‐hairpins are ideal model systems for investigating the mechanism of protein folding because their folding process shows dynamics typical of proteins. We performed folding, unfolding, and refolding molecular dynamics simulations (total of 2.7 μs) of the 10‐residue β‐hairpin peptide chignolin, which is the smallest β‐hairpin structure known to be stable in solution. Our results revealed the folding mechanism of chignolin, which comprises three steps. First, the folding begins with hydrophobic assembly. It brings the main chain together; subsequently, a nascent turn structure is formed. The second step is the conversion of the nascent turn into a tight turn structure along with interconversion of the hydrophobic packing and interstrand hydrogen bonds. Finally, the formation of the hydrogen‐bond network and the complete hydrophobic core as well as the arrangement of side‐chain–side‐chain interactions occur at approximately the same time. This three‐step mechanism appropriately interprets the folding process as involving a combination of previous inconsistent explanations of the folding mechanism of the β‐hairpin, that the first event of the folding is formation of hydrogen bonds and the second is that of the hydrophobic core, or vice versa.     

Structural Characterization and Enzymatic Degradation of α‐, β‐, and γ‐Crystalline Forms for Poly(β‐propiolactone)

A structural comparison of three different crystalline forms of poly(β‐propiolactone) (PPL) was carried out by wide‐angle X‐ray diffraction, Fourier‐transform infrared spectroscopy, and differential scanning calorimetry. The α‐form in a hot‐drawn and annealed film represents a 2₁ helix conformation. The β‐form in a cold‐drawn and annealed film represents a planar zigzag conformation. The γ‐form in an oriented sedimented mat of solution‐grown chain‐folded lamellar crystals also implies a planar zigzag conformation. The solution‐cast film depicts similar outlines with the γ‐form in lamellar crystals in all the experimental measurements, suggesting that the molecular chain in the solution‐cast film has a planar zigzag conformation. While elongation at break decreased, tensile strength and Young's modulus increased with an increase in the crystallinity, independent of the crystalline forms. The influence of the enzymatic degradation of these crystal structures has been investigated by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The rate of degradation was in the order of β‐form > α‐form > solution‐cast (γ‐form) film, and the different surface morphologies after partial enzymatic degradation were observed in scanning electron micrographs. It is suggested that the crystal structure is one of the important factors for determining the rate of degradation together with crystallinity.

Enzymatic degradation profiles of poly(β‐propiolactone) films.     

胆甾-4α-甲基-8-烯-3β，7α-二醇二乙酸酯的结构与性质研究

Lophenol, cholest-4α-methyl-7-en-3β-ol (1), obtained from Dracaena cochinchinensis (Lour.) S. C. Chen, was structurally modified. It was acetylated to protect 3β-hydroxyl group, and then oxidised by selenium dioxide in acetic acid to give cholest-4a-methyl-8-en-3β, Ta-diol diacetate (3). This compound 3 is unstable in chloroform solution or when heated and easily converted to a diene compound, cholest-4a-methyl-7,14-dien-3β-ol acetate (4). The structures of 3 and 4 were elucidated by means of IR, ^1H NMR, ^13C NMR and MS, and the absolute configuration of 3 was established by X-ray crystallography. The property of 3 was also discussed in this paper. Both 3 and 4 are new compounds and were reported for the first time.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Capillary electrophoretic enantioseparation of m‐nisoldipine using two different β‐cyclodextrins

The methods for the enantioseparation of m‐nisoldipine, a new 1,4‐dihydropyridine calcium ion antagonist, were developed. The elaborated methods of m‐nisoldipine enantiomers separation were successfully performed using an anionic CD–sulfobutyl ether‐β‐CD (SBE‐β‐CD) or carboxymethyl‐β‐CD as chiral selector. However, the results indicated that SBE‐β‐CD was a better chiral selector for enantioseparation of the neutral m‐nisoldipine. Furthermore, comparing the two SBE‐β‐CDs, the derivative with a higher degree of substitution (DS) of 7.0 induced better enantioresolution than the one with low DS (4.0). In addition, possible chiral recognition mechanisms of dihydropyridines were discussed.     

Analysis of short‐chain aliphatic amines in food and water samples using a near infrared cyanine 1‐(ε‐succinimydyl‐hexanoate)‐1′‐methyl‐3,3,3′,3′‐tetramethyl‐indocarbocyanine‐5,5′‐disulfonate potassium with CE–LIF detection

Precolumn derivatization of six short‐chain aliphatic amines by a near‐infrared dye, 1‐(ε‐succinimydyl‐hexanoate)‐1′‐methyl‐3,3,3′,3′‐tetramethyl‐indocarbocyanine‐5,5′‐ disulfonate potassium (MeCy5‐OSu), followed by MEKC–CE–LIF detection has been developed as a method for the determination of aliphatic amines in environmental water and food. Optimum derivatization was operated nicely in pH 9.0 borate buffer at 20°C for 30 min. Well separated peaks were observed with a pH 9.5 BGE containing 10 mmol L^?1 phosphoric acid, 20 mmol L^?1 SDS, and 7% methanol buffered with 1.0 mol L^?1 NaOH. The separation procedure was rapidly achieved within 11 min and the matrix interferences could be effectively eliminated. A linear calibration graph was obtained for 5–200 nmol L^?1 analytes with a correlation coefficient in the range 0.9933–0.9995 for amines. This method was successfully utilized to determine aliphatic amines in lake, sewage water, and red wine with recoveries ranging from 96.4 to 105% and the RSDs ranging from 0.9 to 2.9%. Near‐infrared, LIF‐detector‐compatible MeCy5‐OSu was proved suitable for the accurate, sensitive, and rapid separation and determination of aliphatic amines in water and food samples.     

Enantioseparation of α‐hydroxy acids by chiral ligand exchange CE with a dual central metal ion system

Using two kinds of central metal ions in a background electrolyte, ligand exchange CE was investigated for the simultaneous enantioseparation of dl ‐malic, dl ‐tartaric, and dl ‐isocitric acids. Ligand exchange CE with 100 mM d ‐quinic acid as a chiral selector ligand and 10 mM Cu(II) ion as a central metal ion could enantioseparate dl ‐tartaric acid but not dl ‐malic acid or dl ‐isocitric acid. A dual central metal ion system containing 0.5 mM Al(III) ion in addition to 10 mM Cu(II) ion in the background electrolyte enabled the simultaneous enantioseparation of the three α‐hydroxy acids. These results suggest that the use of a dual central metal ion system can be useful for enantioseparation by ligand exchange CE.     

Stabilization of an α Helix by β‐Sheet‐Mediated Self‐Assembly of a Macrocyclic Peptide

Protein roll call : Peptide‐based building blocks, in which both an α‐helix‐forming segment and a β‐sheet segment are located within a single macrocyclic structure, self‐assemble into α‐helix‐decorated artificial proteins. This approach provides a starting point for developing artificial proteins that can modulate α‐helix‐mediated interactions occurring in a multivalent fashion.

     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Combined use of hydroxypropyl‐β‐cyclodextrin and ionic liquids for the simultaneous enantioseparation of four azole antifungals by CE and a study of the synergistic effect

A CE method employing a dual system of hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) and ionic liquids (ILs) has been developed for the simultaneous enantioseparation of four azole antifungals for the first time. In this study, three different types of ILs were employed as modifiers and among them dodecyl trimethyl ammonium chloride was found to be the most effective. The effects of the concentration, cations, and anions of ILs on the enantioseparation were investigated. With the developed dual system, all the enantiomers were well separated in resolutions of 3.8, 3.5, 2.8, and 2.5 for miconazole, econazole, ketoconazole, and itraconazole, respectively. The interactions between dodecyl trimethyl ammonium chloride and HP‐β‐CD were also studied using a neutral polyacrylamide coated capillary and ¹H NMR spectroscopy to further explore the synergistic effect involved. It was found that ILs improved the enantioseparation not only by changing the EOF, but also by interactions with HP‐β‐CD that could change its ability of forming inclusion complex with the enantiomers.     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001