Pre-equilibrium capillary zone electrophoresis or frontal analysis: advantages of plateau peak conditions in affinity capillary electrophoresis

The feasibility of using the affinity CE methodologies pre-equilibrium CZE and CE frontal analysis was tested on interaction systems exhibiting rapid on-and-off kinetics. Experimentally, the methodologies differ only with respect to the volume of sample introduced into the capillary. Pre-equilibrium CZE has been considered amendable to interactions with slow on-and-off kinetics only; however, it has recently been applied in studies of interactions with fast on-and-off kinetics. The effect of varying the sample volume introduced hydrodynamically into the capillary on the apparent degree of complexation was studied. For two different binding systems, the fraction of free analyte was found to be overestimated using pre-equilibrium CZE as compared to volumes providing plateau peak conditions as used with frontal analysis. Results indicate that frontal analysis conditions lead to more robust binding assays and thus more reliable data. The validity of data obtained by pre-equilibrium CZE may be low, thus the use of an experimental setup providing plateau peaks is highly recommended. It is suggested that the effect of altering the sample volume on the degree of binding should be investigated as part of method development and validation.     

Assessment of the binding performance of histamine‐imprinted microspheres by frontal analysis capillary electrophoresis

Frontal analysis capillary electrophoresis was used to evaluate the binding performance of molecularly imprinted microspheres (MIM) toward its template histamine and analogs at pH 7, and compared to the high performance liquid chromatographic method. In both methods, batch binding was employed and the binding parameters were calculated from the measured concentration of unbound amine analytes and afforded comparable histamine equilibrium dissociation constants (K _d ∼ 0.4 mM). FACE was easily carried out at shorter binding equilibration time (i.e. 30 min) and without the need to separate the microspheres, circumventing laborious and, in the case of the system under study, inefficient sample filtration. It also allowed for competitive binding studies by virtue of its ability to distinctly separate intact microspheres and all tested amines which could not be resolved in HPLC. K _d’s for nonimprinted (control) microspheres (NIM) from FACE and HPLC were also comparable (∼ 0.6 mM) but at higher histamine concentrations, HPLC gave lower histamine binding. This discrepancy was attributed to inefficient filtration of the batch binding samples prior to HPLC analysis resulting in an over‐estimation of the concentration of free histamine brought about by the presence of unfiltered histamine‐bound microspheres.     

Evaluation of interactions between RAW264.7 macrophages and small molecules by capillary electrophoresis

In this study, the affinity interactions between RAW 264.7 macrophages and three small molecules including naringin, oleuropein and paeoniflorin were evaluated by affinity capillary electrophoresis (ACE), partial filling affinity capillary electrophoresis (PFACE) and frontal analysis capillary electrophoresis (FACE), respectively. The result indicated that ACE (varying concentrations of cell suspension were filled in the capillary as receptor) may not be suitable for the evaluation of interactions between cell and small molecules due to the high viscosity of cell suspension; PFACE can qualitatively evaluate the interaction, but the difference in viscosity between RAW264.7 suspension and buffer effects on the liner relationship between filling length and injection time, which makes the calculation of binding constant difficult. Furthermore, based on the PFACE results, naringin showed stronger interaction with macrophages than the other two molecules; taking advantage of the aggregation phenomenon of cell induced by electric field, FACE was successfully used to determine the stoichiometry (n = 5×10⁹) and binding constant (K_b = 1×10⁴ L/mol) of the interaction between RAW264.7 and naringin.     

Comparison of mobility shift affinity capillary electrophoresis and capillary electrophoresis frontal analysis for binding constant determination between human serum albumin and small drugs

In this study, two capillary electrophoresis–based ligand binding assays, namely, mobility shift affinity capillary electrophoresis (ms-ACE) and capillary electrophoresis-frontal analysis (CE-FA), were applied to determine binding parameters of human serum albumin toward small drugs under similar experimental conditions. The substances S-amlodipine (S-AML), lidocaine (LDC), l -tryptophan (l -TRP), carbamazepine (CBZ), ibuprofen (IBU), and R-verapamil (R-VPM) were used as the main binding partners. The scope of this comparative study was to estimate and compare both the assays in terms of their primary measure's precision and the reproducibility of the derived binding parameters. The effective mobility could be measured with pooled CV values between 0.55% and 7.6%. The precision of the r values was found in the range between 1.5% and 10%. Both assays were not universally applicable. The CE-FA assay could successfully be applied to measure the drugs IBU, CBZ, and LDC, and the interaction toward CBZ, S-AML, l -TRP, and R-VPM could be determined using ms-ACE. The average variabilities of the estimated binding constants were 64% and 67% for CE-FA and ms-ACE, respectively.     

Interaction of albumins and heparinoids investigated by affinity capillary electrophoresis and free flow electrophoresis

A fast and precise affinity capillary electrophoresis (ACE) method has been applied to investigate the interactions between two serum albumins (HSA and BSA) and heparinoids. Furthermore, different free flow electrophoresis methods were developed to separate the species which appears owing to interaction of albumins with pentosan polysulfate sodium (PPS) under different experimental conditions. For ACE experiments, the normalized mobility ratios (∆R/R_f), which provided information about the binding strength and the overall charge of the protein‐ligand complex, were used to evaluate the binding affinities. ACE experiments were performed at two different temperatures (23 and 37°C). Both BSA and HSA interact more strongly with PPS than with unfractionated and low molecular weight heparins. For PPS, the interactions can already be observed at low mg/L concentrations (3 mg/L), and saturation is already obtained at approximately 20 mg/L. Unfractionated heparin showed almost no interactions with BSA at 23°C, but weak interactions at 37°C at higher heparin concentrations. The additional signals also appeared at higher concentrations at 37°C. Nevertheless, in most cases the binding data were similar at both temperatures. Furthermore, HSA showed a characteristic splitting in two peaks especially after interacting with PPS, which is probably attributable to the formation of two species or conformational change of HSA after interacting with PPS. The free flow electrophoresis methods have confirmed and completed the ACE experiments.     

Determination of binding constants between the antibiotic ristocetin A and D-Ala-D-Ala terminus peptides by affinity capillary electrophoresis

Summary Binding constants between the antibiotic ristocetin A (Rist A) and D-Ala-D-Ala terminus peptides were determined using affinity capillary electrophoresis (ACE). In these experiments two techniques are used to obtain binding constants. In the first, a plug of Rist A and non-interacting standards are injected and electrophoresed. Analysis of the change in the relative migration time ratio (RMTR) of Rist, relative to the non-interacting standards, as a function of the concentration of peptide, yields a value for the binding constant (Kb). In the second, samples of peptide and standards are injected and electrophoresed in increasing concentrations of Rist A in the running buffer. Analysis using theRMTR yields aK _b. The findings described here demonstrate the advantage of using ACE for estimating binding parameters between antibiotics and ligands.     

Comparison of various capillary electrophoretic approaches for the study of drug–protein interaction with emphasis on minimal consumption of protein sample and possibility of automation†

The binding ability of a drug to plasma proteins influences the pharmacokinetics of a drug. As a result, it is a very important issue in new drug development. In this study, affinity capillary electrophoresis, capillary electrophoresis with frontal analysis, and Hummel Dreyer methods with internal and external calibration were used to study the affinity between bovine serum albumin and salicylic acid. The binding constant was measured by all these approaches including the equilibrium dialysis, which is considered to be a reference method. The comparison of results and other considerations showed the best electrophoretic approach to be capillary electrophoresis‐frontal analysis, which is characterized by the high sample throughput with the possibility of automation, very small quantities of biomacromolecules, simplicity, and a short analysis time. The mechanism of complex formation was then examined by capillary electrophoresis with frontal analysis. The binding parameters were determined and the corresponding thermodynamic parameters such as Gibbs free energy ΔG⁰, enthalpy ΔH⁰, and entropy changes ΔS⁰ at various temperatures were calculated. The results showed that the binding of bovine serum albumin and salicylic acid was spontaneous, and that hydrogen bonding and van der Waals forces played a major role in the formation of the complex.     

Determination of binding constants and stoichiometries for platinum anticancer drugs and serum transport proteins by capillary electrophoresis using the Hummel-Dreyer method

A CE method has been developed to evidence and quantitatively characterize the interaction between platinum-based antitumor drugs and human serum proteins. This method is a variant of affinity CE modified regarding both experimental setup and data treatment so as to measure the peaks (or vacancies) that correspond to the bound drug when it slowly binds to the protein. Using the formalism of the Hummel-Dreyer method and cisplatin and oxaliplatin as test compounds, a protocol for determining albumin and transferrin binding constants and stoichiometries, including (and distinguished by) 48 hours of incubation of the reaction mixture, was elaborated. Relative affinities of drugs toward different proteins in aqueous solution at physiological pH, chloride concentration, and temperature were compared in terms of overall binding constants and numbers of drug molecules attached to the protein. The results indicate that both platinum drugs bind to albumin more strongly than to transferrin, supporting the concept that the albumin fraction is a major drug supply route for chemotherapeutical needs. From a comparison with the binding parameters measured previously for cisplatin by other methods, conclusions were drawn about the validity of CE as a simple and convenient method for assaying protein-drug reactions with slow kinetics.     

Study of interaction between drug enantiomers and human serum albumin by flow injection-capillary electrophoresis frontal analysis

Flow injection (FI)-CE coupled with frontal analysis (FA) was applied to the study of stereoselectivity binding of amlodipine (AL) to HSA. Under protein-drug binding equilibrium, the unbound concentrations of drug enantiomers were measured by plateau height. The stereoselectivity of AL binding to HSA was proved by the different free fractions of two enantiomers. In physiological phosphate solution (pH 7.4, ionic strength 0.17) when 200 microM (+/-)AL was equilibrated with 300 microM HSA, the concentration of unbound R-AL was about 1.5 times higher than that of its antipode. The binding constants of two enantiomers, KR-AL and KS-AL, were 9910-11200 and 90200-104000 M(-1), respectively. The results obtained by the method were compared with those determined by conventional equilibrium dialysis (ED)-CE and fluorescence spectra. Hydroxypropyl-beta-CD (HP-beta-CD) (10 mM) was used as a chiral selector in pH 3.7 phosphate buffer. L-tryptophan (L-try) and ketoprofen (Ket) were used as displacement reagents to investigate the binding sites of AL to HSA. A binding synergism effect between hydrochlorothiazide (QL) and AL was observed and the results suggested that QL can destroy binding equilibrium of R-AL and S-AL toward HSA and they can occupy the same binding site of HSA (site I). The reproducibility was confirmed by RSD (RSD<1.5%) of the plateau height determined by FI-CE frontal analysis (FI-CE-FA). The FI-CE-FA was a good method to study protein-drug interaction.     

Interaction of heparin and tetraarginine in capillary electrophoresis: Implication for analytical applications

Interactions between heparin and tetraarginine in an acidic background electrolyte were investigated in capillary electrophoresis. The results showed that tetraarginine and heparin form a stable complex that migrates toward the anode immediately after coming into contact. When a zone of tetraarginine at a mg/mL concentration level passes through a zone of heparin at a μg/mL concentration level, tetraarginine is gradually removed by the formation of the complex that migrates in the opposite direction, thereby decreasing the tetraarginine peak area. The variation of the tetraarginine peak area as a function of the unfractionated heparin concentration was linear within the range 2–20 μg/mL, which enables us to detect and determine heparin concentrations undetectable with a UV detector. The same behavior was confirmed for low molecular weight heparin.     

Determination of binding parameters between lysozyme and its aptamer by frontal analysis continuous microchip electrophoresis (FACMCE)

An original and simple methodology based on microchip electrophoresis (MCE) in a continuous frontal analysis mode (named frontal analysis continuous microchip electrophoresis, FACMCE) was developed for the simultaneous determination of the binding parameters, i.e. ligand-site dissociation constant (k(d)) and number of binding sites on the substrate (n). This simultaneous determination was exemplified with the interaction between an aptamer and its target. The selected target is a strongly basic protein, lysozyme, as its quantification is of great interest due to its antimicrobial and allergenic properties. A glass microdevice equipped with a fluorescence detection system was coated with hydroxypropylcellulose, reducing the electroosmotic flow and adsorption onto the channel walls. This microdevice allowed the continuous electrokinetic injection of a mixture of fluorescently labelled aptamer and non-labelled lysozyme. By determining the concentration of the free fluorescently labelled aptamer thanks to its corresponding plateau height, mathematical linearization methods allowed to determine a k(d) value of 48.4±8.0 nM, consistent with reported results (31 nM), while the average number of binding sites n on lysozyme, never determined before, was 0.16±0.03. These results seem to indicate that the buffer nature and the SELEX process should influence the number and affinity of the binding sites. In parallel it has been shown that the binding between lysozyme and its aptamer presents two sites of different binding affinities.     

On-column derivatization of the antibiotics teicoplanin and ristocetin coupled to affinity capillary electrophoresis

Binding constants between the glycopeptides teicoplanin (Teic) and ristocetin (Rist) and their derivatives to D-Ala-D-Ala terminus peptides were determined by on-column receptor synthesis coupled to partial-filling affinity capillary electrophoresis (PFACE) or affinity capillary electrophoresis (ACE). In these techniques, the column is first partially filled with increasing concentrations of D-Ala-D-Ala terminus peptides. This is followed by plugs of buffer, antibiotic and two noninteracting standards, and acetic and/or succinic anhydride (and buffer in the case of ACE). The order of the reagent plugs containing the antibiotic and anhydride varies with the charge of the glycopeptide. Upon electrophoresis, the antibiotic reacts with the anhydride yielding a derivative of Teic or Rist. Continued electrophoresis results in the overlap of the derivatized antibiotic and the plug of D-Ala-D-Ala peptide. Analysis of the change in the relative migration time ratio (RMTR) of the new glycopeptide relative to the standards, as a function of the concentration of the D-Ala-D-Ala ligand yields a value for the binding constant K(b). The techniques described here can be used to assess how the derivatization of drugs alters their affinities for target molecules.     

毛细管电泳-安培检测法测定3种拟肾上腺素药物

建立了毛细管电泳-安培检测法测定盐酸去氧肾上腺素(phenylephrine hydrochloride, PHE)、重酒石酸间羟胺(metaraminol bitartrate, MR)和盐酸异丙肾上腺素(isoprenaline hydrochloride, IP)3种拟肾上腺素药物的方法。检测电位为0.950 V(Ag/AgCl为参比电极),硼酸盐浓度为50 mmol/L(pH 10.00),分离电压为18 kV,进样时间为10 s。在最佳实验条件下,3种物质在18 min内达到基线分离,在2～100 μmol/L浓度范围内峰面积与浓度呈良好的线性关系,线性相关系数不小于0.9991。盐酸去氧肾上腺素、重酒石酸间羟胺和盐酸异丙肾上腺素的检出限分别为0.8、0.8和1.0 μmol/L。将所建立的方法应用于针剂样品的分析,结果令人满意。     

Application of charged single isomer derivatives of cyclodextrins in capillary electrophoresis for chiral analysis

The review focuses on the role of ionic or ionisable single isomer derivatives (SIDs) of cyclodextrins on the separation of chiral analytes in capillary electrophoresis (CE), covering the period since the year 2000. The advantages of using pure compounds are discussed, as well as the ways to optimise the separations in the context of a rational approach to these techniques. Specific attention is paid to the modulation of the selector–analyte interaction. The advantage due to a detailed knowledge of equilibria occurring in solution during the CE run is underlined, particularly in the case of the presence of metal complexes, as occurs in chiral ligand exchange capillary electrophoresis (CLECE).     

毛细管电泳-电化学法测定阿莫西林含量

阿莫西林(结构如图所示)是广谱半合成的青霉素,属于β-内酰胺类抗生素。阿莫西林胶囊的含量测定,有分光光度法、液相色谱法、毛细管电泳-光检法。电化学仪器简单,不受毛细管光程短的限制,特别是安培检测灵敏度较高。本文对其测定和分离条件进行研究,结果令人满意。     

单电极双通道毛细管电泳法测定盐酸多巴胺

多巴胺(dopam ine)是去甲肾上腺素生物合成的前体,药用的是人工合成品。对其测定已有多种方法报道[1-4],其中毛细管电泳电化学检测方法具有快速、灵敏等优点。电化学检测(EC)是CE中较有发展潜力的一种检测技术[5],其线性范围宽,选择性好,而且响应不依赖于光路的长度,可以用极细     

Estimation of binding constants of receptors and ligands by affinity capillary electrophoresis

An estimation method for determination of binding constants of receptors to ligands by affinity capillary electrophoresis was evaluated. On the basis of the theories of pseudostationary phase or so-called dynamic stationary phase, the retention factor (k) was used to represent the interaction between the receptor and ligand. k could be easily deduced from the migration times of the ligand and the receptor. Then, with the linear relationship of k versus the concentration of ligand in the running buffer, the binding constant K _b was calculated from the slope and intercept. In order to test its feasibility, the calculation method was demonstrated using three model systems: the interactions between vancomycin and N-acetyl-d-Ala-d-Ala, ristocetin and N-acetyl-d-Ala-d-Ala, and carbonic anhydrase B and an arylsulfonamide. Estimated binding constants were compared with those determined by other techniques. The results showed that this estimation method was reliable. This calculation method offers a simple and easy approach to estimating binding constants of ligands to receptors.     

Rapid separation of basic drugs by nonaqueous capillary electrophoresis

Summary Nonaqueous capillary electrophoresis (NACE) has been used to achieve rapid separations of basic drugs. A high electric field was obtained by using short capillaries. Baseline separations of basic drugs, including amphetamines, tropane alkaloids and local anesthetics, were achieved in 1 min by selection of the appropriate organic solvent and electrolyte composition. Thus, high-throughput analyses can be performed. Peak efficiency up to 9154 theoretical plates s⁻¹ was achieved in a separation performed at 923V cm⁻¹. No discernible loss in resolution was observed when a conventional capillary (64.5cm) was replaced by a short (32.5 cm) capillary.     

Determination of chlorite in drinking water by on-line coupling of capillary isotachophoresis and capillary zone electrophoresis

An isotachophoresis (ITP)–capillary zone electrophoresis (CZE) combination was used for the determination of chlorite in drinking waters. No sample preparation is needed and no interfering by other anions in tap water was observed. The reached limits of detection with conductivity detector were 0.012–0.017 mg l⁻¹. By four-fold sample loading with a 30 μl valve, 0.005 mg l⁻¹ of chlorite was determined with R.S.D.=3.3%. The concentrations of 0.05 and 0.20 mg l⁻¹ were measured with R.S.D. of 2.2 and 2.7%, respectively. The recoveries of chlorite from drinking water were 96–106% in the range of 0.02–0.20 mg l⁻¹. The R.S.D. values of migration times (inter-day) were up to 1.3%. The time for analysis is about 15 min.     

On-line affinity selection of histidine-containing peptides using a polymeric monolithic support for capillary electrophoresis

An on-line affinity selection method using a polymeric monolithic support is proposed for the retention of histidine-containing peptides and their subsequent separation by capillary zone electrophoresis (CZE). Monolithic capillary columns were prepared in fused-silica capillaries of 150 mum inner diameter (ID) by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iminodiacetic acid (IDA) and copper ion. Monolithic microextractors were coupled on-line near the inlet of the separation capillary (fused-silica capillary, 75 mum ID x 28 cm from the microextractor to the detector). Model peptide mixtures of histidine-containing and histidine-noncontaining peptides were assessed. Peptides were released from the sorbent by a 5 mM imidazole solution and then separated by CZE with ultraviolet detection. Relative standard deviation values for migration times and corrected peak areas were found to be lower than 5.8 and 10.5%, respectively. IDA-Cu(II) ion modified monolithic microextractors showed a chromatographic behavior and could be reused at least 25 times. The use of monolithic supports proved to be an advantageous alternative to packed particles for the preparation of microextractors.