Rapid synthesis of 2,5‐disubtituted 1,3,4‐thiadiazoles under microwave irradiation

The one pot, three‐components condensation of aromatic aldehydes, hydrazine and sulfur in ethanol under microwave irradiation provided symmetrically 3,5‐disubstituted 1,3,4‐thiadiazoles in high yields and good purity. This reaction must be conducted under pressure of hydrogen sulfide produced in‐situ. The structure of the compounds was confirmed by ¹H, ¹³C NMR, MS and elemental analysis.     

An efficient one‐pot synthesis of n‐carboxymethylacridine‐1,8‐dione derivatives under microwave irradiation

A series of N‐carboxymethylacridine‐1,8‐dione derivatives were synthesized by one‐pot reaction of aldehyde, dimedone and glycine in glycol under microwave irradiation without catalyst with excellent yields (78‐92%) and short reaction time (4‐8min). And the reaction was not only suitable for aromatic monoaldehyde, but also aromatic dialdehyde.     

An efficient one‐pot synthesis of polyhydrobenzoacridine‐1‐one derivatives under microwave irradiation without catalyst

A series of 3,3‐dimethyl‐9‐substituted‐1,2,3,4,9,10‐hexahydrobenzo[c] acridine‐1‐ones and 3,3‐dimethyl‐9‐substituted‐1,2,3,4,9,10‐hexahydrobenzo[a] acridine‐1‐ones were synthesized by the reaction of an aldehyde, α‐naphthylamine or β‐naphthylamine and dimedone under microwave irradiation with short times and high yields.     

An efficient one‐pot synthesis of novel pyrimidoquinoline derivatives under microwave irradiation without catalyst

A series of pyrimidoquinoline derivatives were synthesized through one‐pot condensation of 2,6‐diaminopyrimidin‐4‐one, aldehyde and cyclic a 1,3‐dicarbonyl compound in glycol under microwave irradiation without catalyst. The protocol in the absence of catalyst has the advantage of good yield (87‐95%), short reaction time (4‐7 min) and an environmentally friendly technique.     

Soluble poly(ethylene glycol) supported efficient synthesis of 2,5‐disubstituted 1,3,4‐oxadiazoles and 1,3,4‐thiadiazoles

An efficient soluble poly(ethylene glycol) (PEG) supported liquid‐phase parallel synthetic method for 2,5‐disubstituted 1,3,4‐oxadiazoles and 1,3,4‐thiadiazoles is described. 2‐Aryl‐5‐(4′‐methoxycarbonylphenoxymethyl)‐1,3,4‐oxadiazoles and 2‐aryloxymethyl‐5‐(4′‐methoxycarbonylphenoxyacetamido)‐1,3,4‐thiadiazoles are synthesized in high yield and high purity using this polymer supported strategy. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:664–669, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20253     

Molecular iodine‐catalyzed one‐pot synthesis of tetrahydrobenzo[a]xanthene‐11‐one and diazabenzo[a]anthracene‐9,11‐dione derivatives under microwave irradiation

An efficient one‐pot condensation of β‐naphthol, aldehydes, and cyclic 1,3‐dicarbonyl compounds has been achieved with molecular iodine as a catalyst under microwave irradiation, thus a variety of tetrahydrobenzo[a]xanthene‐11‐one and diazabenzo[a]anthracene‐9,11‐dione derivatives were prepared in good yields. J. Heterocyclic Chem., (2011).     

Eco‐friendly and facile one‐pot multicomponent synthesis of acridinediones in water under microwave

A rapid, improved, and environmentally benign synthesis of 4‐arylacridinediones is reported via one‐pot multicomponent reaction of aromatic aldehydes, dimedone, and ammonium acetate in water without any catalyst under microwave irradiation. Excellent yields, shortest reaction time, and easy work‐up are attractive features of this green protocol. J. Heterocyclic Chem., 2011..     

An efficient one‐pot synthesis of dispiropyrrolidine derivatives through 1,3‐dipolar cycloaddition reactions under ultrasound irradiation

A series of dispiropyrrolidine derivatives were synthesized via the three‐component 1,3‐dipolar cycloaddition reaction of isatin, sarcosine and 5‐arylidene‐1,3‐thiazolidine‐2,4‐dione or 5‐arylidene‐4‐thioxo‐1,3‐thiazolidine‐2‐one in ethanol under ultrasound irradiation. This protocol has the advantages of mild reaction conditions, higher yields, and shorter reaction time. J. Heterocyclic Chem., (2011).     

Corrosion inhibition and performance evaluation on 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives

Using electrochemical impedance spectroscopy (EIS) and scanning electronic microscopy (SEM), this paper evaluated the inhibition effect of four 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives named 2,5‐diphenly‐1,3,4‐thiadiazole (DPTD), 2,5‐di(2‐hydroxyphenly)‐1,3,4‐thiadiazole (2‐DHPTD), 2,5‐di(3‐hydroxyphenly)‐1,3,4‐thiadiazole (3‐DHPTD), and 2,5‐di(4‐hydroxyphenly)‐1,3,4‐thiadiazole (4‐DHPTD) on silver strip corrosion in 50 mg/l sulfur–ethanol solution under room temperature. The experiments indicated that the inhibition efficiency increased with increasing inhibitor concentrations, and the increasing order was (4‐DHPDT) > (3‐DHPDT) > (2‐DHPDT) > (DPDT). Quantum chemical calculation was applied to correlate inhibition performances with their electronic structural parameters of thiadiazole derivatives. Molecular dynamics simulations (DFT) were used to optimize the equilibrium configurations of the inhibitor molecules on the silver surface and to investigate the molecular structure effect on the corrosion inhibition efficiency. The efficiency order of the investigated inhibitors, which was obtained by experimental results, was verified by theoretical calculations. Contact angle (CA) analysis was also carried out, and finally confirmed the existence of the adsorbed film which prevailed in addition of thiadiazole derivatives. CA analysis indicated that the film of n‐DHPTD (n = 2,3,4) was hydrophilic, owing to two hydroxyl groups in their molecular. The adsorption of these compounds onto silver strip from 50 mg/l S‐ethanol system obeys Langmuir adsorption isotherm, and it belongs to mixed‐type adsorption mainly dominated by chemisorption. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐pot synthesis of novel N‐cyclopropyldecahydroacridine‐1,8‐dione derivatives under microwave irradiation

A series of new N‐cyclopropyldecahydroacridine‐1,8‐dione derivatives were synthesized by one‐pot reaction of aromatic aldehyde, dimedone (or 1,3‐cyclohexanedione) and cyclopropanamine in solution of glycol and water under microwave irradiation with excellent yields (78‐94%) and short reaction time (5‐10 min).     

Phosphomolybdic acid catalyzed facile one‐pot synthesis of 2,4,5‐triaryl‐1H‐imidazoles from benzil and aromatic aldehydes

A facile one‐pot synthesis of 2,4,5‐triaryl‐1H‐imidazoles with better yields and shorter reaction time from the condensation of benzil, ammonium acetate and aromatic aldehydes using the catalyst phosphomolybdic acid is described     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

An efficient one‐pot synthesis of 2‐aminopyrimidinomethylnaphtols under solvent‐free conditions

A novel one‐pot three‐component condensation reaction of an aldehyde, 2‐aminopyrimidine and 2‐naphthol to afford the corresponding 2‐aminopyrimidinomethylnaphtols in good yields. The remarkable features of this new procedure are high conversions, short reaction time, clean reaction profiles, and environmentally benign and simple work‐up procedures.     

New one step synthesis of 3,5‐disubstituted pyrazoles under microwave irradiation and classical heating

A convenient one pot procedure for the synthesis of 3,5-disubstituted pyrazoles by condensation of chalcones, hydrazine hydrate and sulfur in ethanol under microwave irradiation and conventional heating method is reported. The hydrogen sulfide is produced during the reaction. The pyrazoles are obtained in good yields and excellent state of purity. The structures of new compounds were confirmed by IR, ¹H, and ¹³C NMR, MS and elemental analysis.     

One‐pot Synthesis of 2,5‐Disubstituted‐1,3,4‐oxadiazoles Based on the Reaction of N,N‐Dimethyl Amides with Acid Hydrazides

Convenient and efficient one pot method for the synthesis of 2,5‐disubstituted‐1,3,4‐oxadiazoles based on the reaction of N,N‐dimethyl amides with acid hydrazides has been developed. The methodology is applied to a wide range of difference aryl hydrazide and difference N,N‐dimethyl amides to 2,5‐disubstituted‐1,3,4‐oxadiazoles yield the in good to excellent yields. It will be possible wide useful application in synthesis.     

A convenient one‐pot synthesis of 1,2‐azaphospholanium salts

A novel facile one‐pot synthesis of the 1,2‐azaphospholanes by intramolecular alkylation of 3‐halopropyl amides of tricoordinate phosphorus has been suggested. Using this method, a series of the differently N‐substituted 1,2‐azaphospholanium salts were synthesized. 3‐Aminopropylphosphine oxides were obtained by hydrolysis of the salts. A probable mechanism of the 1,2‐azaphospholanium salts formation is discussed. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:596–602, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10209     

An efficient synthesis of pharmacologically active derivatives of 1,3,4‐oxadiazoles

A simple and environmental friendly microwave irradiation method is devised for the synthesis of derivatives of 1,3,4‐oxadiazoles viz., 6a‐e and 7h‐q in 75–90% yield. Structures of the newly synthesised compounds were confirmed by physical, analytical and spectral (ir, ¹H and ¹³C nmr and ms) data and screened for antiinflammatory, anticonvulsant, antidiuretic and antihaemostatic activities. Some of the compounds have shown potent activities.     

An efficient one‐pot synthesis of 2‐benzylpyrroles and 3‐benzylindoles

One‐pot regioselective benzylation of pyrroles and indoles using zirconium tetrachloride is discussed. This has been achieved by in‐situ generation of di(1H‐pyrrol‐1‐yl)zirconium(IV) chloride and di(1H‐indol‐1‐yl)zirconium(IV) chloride. It was observed that benzylation reactions of these complexes using n‐BuLi occurred at C‐2 position for pyrrole and C‐3 for indole. Copyright © 2011 John Wiley & Sons, Ltd.