A weakly compressible MPS method for modeling of open‐boundary free‐surface flow

A mesh‐free particle method, based on the moving particle semi‐implicit (MPS) interaction model, has been developed for the simulation of two‐dimensional open‐boundary free‐surface flows. The incompressibility model in the original MPS has been replaced with a weakly incompressible model. The effect of this replacement on the efficiency and accuracy of the model has been investigated. The new inflow–outflow boundary conditions along with the particle recycling strategy proposed in this study extend the application of the model to open‐boundary problems. The final model is able to simulate open‐boundary free surface flow in cases of large deformation and fragmentation of free surface. The models and proposed algorithms have been validated and applied to sample problems. The results confirm the model's efficiency and accuracy. Copyright © 2009 John Wiley & Sons, Ltd.     

使用时间插值的特征线法在光滑粒子法拉氏边界条件中的应用

在计算流体动力学的实际应用中无反射边界条件是一个重要的研究课题. 文中应用时间插值的特征线方法构造了一种新式的拉氏边界条件,并应用在光滑粒子法中. 该方法与使用特征线方法的欧拉边界条件方法相比,不需要区分超声速和亚声速流的不同,并且在入流和出流中具有相同的形式,因而更加简便易行. 数值结果表明,采用时间插值特征线法的拉氏边界条件方法在稀疏波、激波以及爆轰波的模拟中都能够得到较好的无反射效果.      

A stabilized Nitsche‐type extended embedding mesh approach for 3D low‐ and high‐Reynolds‐number flows

This paper presents a stabilized extended finite element method (XFEM) based fluid formulation to embed arbitrary fluid patches into a fixed background fluid mesh. The new approach is highly beneficial when it comes to computational grid generation for complex domains, as it allows locally increased resolutions independent from size and structure of the background mesh. Motivating applications for such a domain decomposition technique are complex fluid‐structure interaction problems, where an additional boundary layer mesh is used to accurately capture the flow around the structure. The objective of this work is to provide an accurate and robust XFEM‐based coupling for low‐ as well as high‐Reynolds‐number flows. Our formulation is built from the following essential ingredients: Coupling conditions on the embedded interface are imposed weakly using Nitsche's method supported by extra terms to guarantee mass conservation and to control the convective mass transport across the interface for transient viscous‐dominated and convection‐dominated flows. Residual‐based fluid stabilizations in the interior of the fluid subdomains and accompanying face‐oriented fluid and ghost‐penalty stabilizations in the interface zone stabilize the formulation in the entire fluid domain. A detailed numerical study of our stabilized embedded fluid formulation, including an investigation of variants of Nitsche's method for viscous flows, shows optimal error convergence for viscous‐dominated and convection‐dominated flow problems independent of the interface position. Challenging two‐dimensional and three‐dimensional numerical examples highlight the robustness of our approach in all flow regimes: benchmark computations for laminar flow around a cylinder, a turbulent driven cavity flow at Re = 10000 and the flow interacting with a three‐dimensional flexible wall. Copyright © 2016 John Wiley & Sons, Ltd.     

An approach of dynamic mesh adaptation for simulating 3‐dimensional unsteady moving‐immersed‐boundary flows

In this paper, we present an approach of dynamic mesh adaptation for simulating complex 3‐dimensional incompressible moving‐boundary flows by immersed boundary methods. Tetrahedral meshes are adapted by a hierarchical refining/coarsening algorithm. Regular refinement is accomplished by dividing 1 tetrahedron into 8 subcells, and irregular refinement is only for eliminating the hanging points. Merging the 8 subcells obtained by regular refinement, the mesh is coarsened. With hierarchical refining/coarsening, mesh adaptivity can be achieved by adjusting the mesh only 1 time for each adaptation period. The level difference between 2 neighboring cells never exceeds 1, and the geometrical quality of mesh does not degrade as the level of adaptive mesh increases. A predictor‐corrector scheme is introduced to eliminate the phase lag between adapted mesh and unsteady solution. The error caused by each solution transferring from the old mesh to the new adapted one is small because most of the nodes on the 2 meshes are coincident. An immersed boundary method named local domain‐free discretization is employed to solve the flow equations. Several numerical experiments have been conducted for 3‐dimensional incompressible moving‐boundary flows. By using the present approach, the number of mesh nodes is reduced greatly while the accuracy of solution can be preserved.     

A local domain‐free discretization method to simulate three‐dimensional compressible inviscid flows

In this paper, the domain‐free discretization method (DFD) is extended to simulate the three‐dimensional compressible inviscid flows governed by Euler equations. The discretization strategy of DFD is that the discrete form of governing equations at an interior point may involve some points outside the solution domain. The functional values at the exterior‐dependent points are updated at each time step by extrapolation along the wall normal direction in conjunction with the wall boundary conditions and the simplified momentum equation in the vicinity of the wall. Spatial discretization is achieved with the help of the finite element Galerkin approximation. The concept of ‘osculating plane’ is adopted, with which the local DFD can be easily implemented for the three‐dimensional case. Geometry‐adaptive tetrahedral mesh is employed for three‐dimensional calculations. Finally, we validate the DFD method for three‐dimensional compressible inviscid flow simulations by computing transonic flows over the ONERA M6 wing. Comparison with the reference experimental data and numerical results on boundary‐conforming grid was displayed and the results show that the present DFD results compare very well with the reference data. Copyright © 2009 John Wiley & Sons, Ltd.     

On the immersed boundary‐lattice Boltzmann simulations of incompressible flows with freely moving objects

For simulating freely moving problems, conventional immersed boundary‐lattice Boltzmann methods encounter two major difficulties of an extremely large flow domain and the incompressible limit. To remove these two difficulties, this work proposes an immersed boundary‐lattice Boltzmann flux solver (IB‐LBFS) in the arbitrary Lagragian–Eulerian (ALE) coordinates and establishes a dynamic similarity theory. In the ALE‐based IB‐LBFS, the flow filed is obtained by using the LBFS on a moving Cartesian mesh, and the no‐slip boundary condition is implemented by using the boundary condition‐enforced immersed boundary method. The velocity of the Cartesian mesh is set the same as the translational velocity of the freely moving object so that there is no relative motion between the plate center and the mesh. This enables the ALE‐based IB‐LBFS to study flows with a freely moving object in a large open flow domain. By normalizing the governing equations for the flow domain and the motion of rigid body, six non‐dimensional parameters are derived and maintained to be the same in both physical systems and the lattice Boltzmann framework. This similarity algorithm enables the lattice Boltzmann equation‐based solver to study a general freely moving problem within the incompressible limit. The proposed solver and dynamic similarity theory have been successfully validated by simulating the flow around an in‐line oscillating cylinder, single particle sedimentation, and flows with a freely falling plate. The obtained results agree well with both numerical and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

A detailed study of lid‐driven cavity flow at moderate Reynolds numbers using Incompressible SPH

Lid‐driven cavity flow at moderate Reynolds numbers is studied here, employing a mesh‐free method known as Smoothed Particle Hydrodynamics (SPH). In a detailed study of this benchmark, the incompressible SPH approach is applied together with a particle shifting algorithm. Additionally, a new treatment for no‐slip boundary conditions is developed and tested. The use of the aforementioned numerical treatment for solid walls leads to significant improvements in the results with respect to other SPH simulations carried out with similar spatial resolution. However, the effect of spatial resolution is not considered in the present study as the number of particles used in each case was kept constant, approximately reproducing the same resolutions employed in reference studies available in the literature as well. Altogether, the detailed comparisons of field variables at discreet points demonstrate the accuracy and robustness of the new SPH method. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct numerical simulation of decaying two‐dimensional turbulence in a no‐slip square box using smoothed particle hydrodynamics

This paper explores the application of SPH to a DNS of decaying turbulence in a two‐dimensional no‐slip wall‐bounded domain. In this bounded domain, the inverse energy cascade, and a net torque exerted by the boundary, results in a spontaneous spin‐up of the fluid, leading to a typical end state of a large monopole vortex that fills the domain. The SPH simulations were compared against published results using a high‐accuracy pseudo‐spectral code. Ensemble averages of the kinetic energy, enstrophy and average vortex wavenumber compared well against the pseudo‐spectral results, as did the evolution of the total angular momentum of the fluid. However, although the pseudo‐spectral results emphasised the importance of the no‐slip boundaries as generators of long‐lived coherent vortices in the flow, no such generation was seen in the SPH results. Vorticity filaments produced at the boundary were always dissipated by the flow shortly after separating from the boundary layer. The kinetic energy spectrum of the SPH results was calculated using an SPH Fourier transform that operates directly on the disordered particles. The ensemble kinetic energy spectrum showed the expected k^?3 scaling over most of the inertial range. However, the spectrum flattened at smaller length scales (initially less than 7.5 particle spacings and growing in size over time), indicating an excess of small‐scale kinetic energy.Copyright © 2011 John Wiley & Sons, Ltd.     

Unified semi‐analytical wall boundary conditions for inviscid,laminar or turbulent flows in the meshless SPH method

Wall boundary conditions in smoothed particle hydrodynamics (SPH) is a key issue to perform accurate simulations. We propose here a new approach based on a renormalising factor for writing all boundary terms. This factor depends on the local shape of a wall and on the position of a particle relative to the wall, which is described by segments (in two‐dimensions), instead of the cumbersome fictitious or ghost particles used in most existing SPH models. By solving a dynamic equation for the renormalising factor, we significantly improve traditional wall treatment in SPH, for pressure forces, wall friction and turbulent conditions. The new model is demonstrated for cases including hydrostatic conditions for still water in a tank of complex geometry and a dam break over triangular bed profile with sharp angle where significant improved behaviour is obtained in comparison with the conventional boundary techniques. The latter case is also compared with a finite volume and volume‐of‐fluid scheme. The performance of the model for a two‐dimensional laminar flow in a channel is demonstrated where the profiles of velocity are in agreement with the theoretical ones, demonstrating that the derived wall shear stress balances the pressure gradient. Finally, the performance of the model is demonstrated for flow in a schematic fish pass where both the velocity field and turbulent viscosity fields are satisfactorily reproduced compared with mesh‐based codes. Copyright © 2012 John Wiley & Sons, Ltd.     

A comparative study of inflow conditions for two‐ and three‐dimensional spatially developing mixing layers using large eddy simulation

A series of spatially developing mixing layers are simulated using the large eddy simulation (LES) technique. A hyperbolic tangent function and data derived from boundary layer simulations are used to generate the inflow condition, and their effects on the flow are compared. The simulations are performed in both two and three dimensions. In two‐dimensional simulations, both types of inflow conditions produce a layer that grows through successive pairings of Kelvin–Helmholtz (K–H) vortices, but the composition ratio is lower for the hyperbolic tangent inflow simulations. The two‐dimensional simulations do not undergo a transition to turbulence. The three‐dimensional simulations produce a transition to turbulence, and coherent structures are found in the post‐transition region of the flow. The composition ratio of the three‐dimensional layers is reduced in comparison to the counterpart two‐dimensional runs. The mechanisms of growth are investigated in each type of simulation, and amalgamative pairing interactions are found in the pre‐transition region of the three‐dimensional simulations, and throughout the entire computational domain of those carried out in two‐dimensions. The structures beyond the post‐transition region of the three‐dimensional simulations appear to behave in a much different manner to their pre‐transition cousins, with no pairing‐type interactions observed in the turbulent flow. In order to accurately simulate spatially developing mixing layers, it is postulated that the inflow conditions must closely correspond to the conditions present in the reference experiment. Copyright © 2007 John Wiley & Sons, Ltd.     

An improved KGF‐SPH with a novel discrete scheme of Laplacian operator for viscous incompressible fluid flows

The kernel gradient free (KGF) smoothed particle hydrodynamics (SPH) method is a modified finite particle method (FPM) which has higher order accuracy than the conventional SPH method. In KGF‐SPH, no kernel gradient is required in the whole computation, and this leads to good flexibility in the selection of smoothing functions and it is also associated with a symmetric corrective matrix. When modeling viscous incompressible flows with SPH, FPM or KGF‐SPH, it is usual to approximate the Laplacian term with nested approximation on velocity, and this may introduce numerical errors from the nested approximation, and also cause difficulties in dealing with boundary conditions. In this paper, an improved KGF‐SPH method is presented for modeling viscous, incompressible fluid flows with a novel discrete scheme of Laplacian operator. The improved KGF‐SPH method avoids nested approximation of first order derivatives, and keeps the good feature of ‘kernel gradient free’. The two‐dimensional incompressible fluid flow of shear cavity, both in Euler frame and Lagrangian frame, are simulated by SPH, FPM, the original KGF‐SPH and improved KGF‐SPH. The numerical results show that the improved KGF‐SPH with the novel discrete scheme of Laplacian operator are more accurate than SPH, and more stable than FPM and the original KGF‐SPH. Copyright © 2015 John Wiley & Sons, Ltd.     

Toward low‐noise synthetic turbulent inflow conditions for aeroacoustic calculations

The accuracy of boundary conditions for computational aeroacoustics is a well‐known challenge, due in part to the necessity of truncating the flow domain and replacing the analytical boundary conditions at infinity with numerical boundary conditions. In particular, the inflow boundary condition involving turbulent velocity or scalar fields is likely to introduce spurious waves into the domain, therefore degrading the flow behavior and deteriorating the physical acoustic waves. In this work, a method to generate low‐noise, divergence‐free, synthetic turbulence for inflow boundary conditions is proposed. It relies on the classical view of turbulence as a superposition of random eddies convected with the mean flow. Within the proposed model, the vector potential and the requirement that the individual eddies must satisfy the linearized momentum equations about the mean flow are used. The model is tested using isolated eddies convected through the inflow boundary and an experimental benchmark data for spatially decaying isotropic turbulence. Copyright © 2013 John Wiley & Sons, Ltd.     

Finite analytic boundary condition for a higher‐order finite analytic scheme

A higher‐order finite analytic scheme based on one‐dimensional finite analytic solutions is used to discretize three‐dimensional equations governing turbulent incompressible free surface flow. In order to preserve the accuracy of the numerical scheme, a new, finite analytic boundary condition is proposed for an accurate numerical solution of the partial differential equation. This condition has higher‐order accuracy. Thus, the same order of accuracy is used for the boundary. Boundary conditions were formulated and derived for fluid inflow, outflow, impermeable surfaces and symmetry planes. The derived boundary conditions are treated implicitly and updated with the solution of the problem. The basic idea for the derivation of boundary conditions was to use the discretized form of the governing equations for the fluid flow simplified on the boundaries and flow information. To illustrate the influence of the higher‐order effects at the boundaries, another, lower‐order finite analytic boundary condition, is suggested. The simulations are performed to demonstrate the validity of the present scheme and boundary conditions for a Wigley hull advancing in calm water. Copyright © 2005 John Wiley & Sons, Ltd.     

Incompressible fluid flow simulations with flow rate as the sole information at synthetic inflow and outflow boundaries

In numerically simulating heat and mass transport processes in an unconfined domain involving synthetic open (inflow and/or outflow) boundaries, how to properly specify flow conditions at these boundaries can become a challenging issue. In this work, within the context of a pressure‐based finite volume method under an unstructured grid, a solution procedure without the need for explicit specification of flow profiles at any of these boundaries when simulating incompressible fluid flow is proposed and numerically examined. Within this methodology, the flow at any open boundary is not necessarily assumed to be unidirectional or fully developed; indeed, the sole information required is the mass flow rate crossing the boundary. As a result, one can select the specific region of interest to perform simulations, rather than having to artificially increase the flow domain so as to invoke fully developed flow at all open boundaries. This not only greatly reduces computational costs (both in terms of memory requirements and simulation run‐time) but provides the means to engage with flow problems, which otherwise cannot be solved with currently available methods for handling the flow conditions at open boundaries. The proposed methodology is demonstrated by simulating laminar flow of an incompressible fluid in a two‐dimensional planar channel with a 90° T‐branch, a known inflow rate, and flow splits for the two outflow channels. The results obtained by placing the entrance and the two exits at different locations show that the flow behavior predicted is completely unaffected by using a highly truncated domain. Copyright © 2015 John Wiley & Sons, Ltd.     

A parallel cell‐based DSMC method on unstructured adaptive meshes

A parallel DSMC method based on a cell‐based data structure is developed for the efficient simulation of rarefied gas flows on PC‐clusters. Parallel computation is made by decomposing the computational domain into several subdomains. Dynamic load balancing between processors is achieved based on the number of simulation particles and the number of cells allocated in each subdomain. Adjustment of cell size is also made through mesh adaptation for the improvement of solution accuracy and the efficient usage of meshes. Applications were made for a two‐dimensional supersonic leading‐edge flow, the axi‐symmetric Rothe's nozzle, and the open hollow cylinder flare flow for validation. It was found that the present method is an efficient tool for the simulation of rarefied gas flows on PC‐based parallel machines. Copyright © 2004 John Wiley & Sons, Ltd.     

Assessment of global linear stability analysis using a time‐stepping approach for compressible flows

Global linear stability analysis combined with computational fluid dynamics (CFD) is considered useful for understanding the physics of fluid flows. However, the numerical techniques of global linear stability analysis for compressible flows have not been well established in comparison with those for incompressible flows. In this study, we develop and assess a set of appropriate numerical techniques required to conduct a global linear stability analysis for compressible flows. For the eigensystem analysis, the Arnoldi method combined with time integration is in effect to preserve the memory (RAM) size of the computer. The compact difference scheme is used for the CFD analysis from the viewpoints of computing accurate global modes and saving memory by reducing the number of grid points to obtain the necessary spatial resolution. To assess the proposed method, two‐dimensional compressible flow problems, including regularized cavity flow, flow around a square cylinder, and the compressible mixing layer, are analyzed, and it is confirmed that the proposed method can obtain accurate mode shapes, growth rate, and frequency of the corresponding global modes. In addition, influences and an appropriate formulation of the outflow boundary conditions are investigated. Results reveal that the outflow boundary causes spurious unstable modes in the global linear stability analysis, and the radiation and outflow boundary condition and the extension of the computational domain with grid stretching keep the spurious unstable modes to a minimum. Copyright © 2015 John Wiley & Sons, Ltd.     

An assessment of a parallel,finite element method for three‐dimensional,moving‐boundary flows driven by capillarity for simulation of viscous sintering

A parallel, finite element method is presented for the computation of three‐dimensional, free‐surface flows where surface tension effects are significant. The method employs an unstructured tetrahedral mesh, a front‐tracking arbitrary Lagrangian–Eulerian formulation, and fully implicit time integration. Interior mesh motion is accomplished via pseudo‐solid mesh deformation. Surface tension effects are incorporated directly into the momentum equation boundary conditions using surface identities that circumvent the need to compute second derivatives of the surface shape, resulting in a robust representation of capillary phenomena. Sample results are shown for the viscous sintering of glassy ceramic particles. The most serious performance issue is error arising from mesh distortion when boundary motion is significant. This effect can be severe enough to stop the calculations; some simple strategies for improving performance are tested. Copyright © 2001 John Wiley & Sons, Ltd.     

Two‐dimensional implicit time‐dependent calculations on adaptive unstructured meshes with time evolving boundaries

An implicit multigrid‐driven algorithm for two‐dimensional incompressible laminar viscous flows has been coupled with a solution adaptation method and a mesh movement method for boundary movement. Time‐dependent calculations are performed implicitly by regarding each time step as a steady‐state problem in pseudo‐time. The method of artificial compressibility is used to solve the flow equations. The solution mesh adaptation method performs local mesh refinement using an incremental Delaunay algorithm and mesh coarsening by means of edge collapse. Mesh movement is achieved by modeling the computational domain as an elastic solid and solving the equilibrium equations for the stress field. The solution adaptation method has been validated by comparison with experimental results and other computational results for low Reynolds number flow over a shedding circular cylinder. Preliminary validation of the mesh movement method has been demonstrated by a comparison with experimental results of an oscillating airfoil and with computational results for an oscillating cylinder. Copyright © 2005 John Wiley & Sons, Ltd.     

Computations of a laminar backward‐facing step flow at Re=800 with a spectral domain decomposition method

The two‐dimensional laminar incompressible flow over a backward‐facing step is computed using a spectral domain decomposition approach. A minimum number of subdomains (two) is used; high resolution being achieved by increasing the order of the basis Chebyshev polynomial. Results for the case of a Reynolds number of 800 are presented and compared in detail with benchmark computations. Stable accurate steady flow solutions were obtained using substantially fewer nodes than in previously reported simulations. In addition, the problem of outflow boundary conditions was examined on a shortened domain. Because of their more global nature, spectral methods are particularly sensitive to imposed boundary conditions, which may be exploited in examining the effect of artificial (non‐physical) outflow boundary conditions. Two widely used set of conditions were tested: pseudo stress‐free conditions and zero normal gradient conditions. Contrary to previous results using the finite volume approach, the latter is found to yield a qualitatively erroneous yet stable flow‐field. Copyright © 1999 John Wiley & Sons, Ltd.     

Using fully implicit conservative statements to close open boundaries passing through recirculations

The numerical solution of the fluid flow governing equations requires the implementation of certain boundary conditions at suitable places to make the problem well‐posed. Most of numerical strategies exhibit weak performance and obtain inaccurate solutions if the solution domain boundaries are not placed at adequate locations. Unfortunately, many practical fluid flow problems pose difficulty at their boundaries because the required information for solving the PDE's is not available there. On the other hand, large solution domains with known boundary conditions normally need a higher number of mesh nodes, which can increase the computational cost. Such difficulties have motivated the CFD workers to confine the solution domain and solve it using artificial boundaries with unknown flow conditions prevailing there. In this work, we develop a general strategy, which enables the control‐volume‐based methods to close the outflow boundary at arbitrary locations where the flow conditions are not known prior to the solution. In this regard, we extend suitable conservative statements at the outflow boundary. The derived statements gradually detect the correct boundary conditions at arbitrary boundaries via an implicit procedure using a finite element volume method. The extended statements are validated by solving the truncated benchmark backward‐facing step problem. The investigation shows that the downstream boundary can pass through a recirculation zone without deteriorating the accuracy of the solution either in the domain or at its boundaries. The results indicate that the extended formulation is robust enough to be employed in solution domains with unknown boundary conditions. Copyright © 2006 John Wiley & Sons, Ltd.