5,5′‐Hydrazinebistetrazole: An Oxidation‐stable Nitrogen‐rich Compound and Starting Material for the Synthesis of 5,5′‐Azobistetrazolates

All 5,5′‐hydrazinebistetrazoles reported in the literature are sensitive to oxidation and react with atmospheric oxygen to yield the corresponding 5,5′‐azobistetrazolates on time. Herewith, we report on the synthesis of the free acid 5,5′‐hydrazinebistetrazole (HBT) which showed to be stable on air for extended periods of time. The compound was fully characterized by analytical and spectroscopic methods and its X‐ray structure was determined by diffraction techniques. Besides, we determined its explosive properties by BAM methods and calculated its heat of formation (+414 kJ mol^?1), detonation velocity (8523 m s^?1) and detonation pressure (27.7 GPa). HBT proved to be very safe to handle (impact sensitivity: >30 J, friction sensitivity: ～108 N) and was used as a starting material for the synthesis of some already reported 5,5′‐azobistetrazolates: NH₄⁺, NH₂NH₃⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Two Energetic Salts based on 5,5′‐Bitetrazole‐1,1′‐diolate: Syntheses,Characterization, and Properties

Two salts based on 1H,1′H‐5,5′‐bitetrazole‐1,1′‐diolate (BTO) anion with pyrazole ( 1 ) and imidazole ( 2 ) cations were synthesized with metathesis reactions. Structural characterization was accomplished for them by using the element analysis, Fourier transform infrared spectroscopy (FT‐IR), NMR and mass spectrum, and X‐ray single crystal diffraction. Thermal analysis for the title salts were determined by means of differential scanning calorimetry (DSC) and thermogravimetry‐derivative thermogravimetry (TG‐DTG) as well as the calculation of non‐isothermal kinetic parameters. Consequently, both salts shown acceptable thermal stabilities as the decomposition temperatures were over 200 °C. The enthalpies of formation were calculated for these salts using the measured combustion energies with a result of 70.6 kJ · mol^–1 for 1 and –47.8 kJ · mol^–1 for 2 , respectively. Impact and friction sensitivities were also tested and the results indicated that these salts both have low sensitivities (>40 J, 120 N). The title energetic salts possess acceptable performance, they can therefore be applied in the field of energetic materials.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

A three‐dimensional CdII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands

The title coordination polymer, poly[[aqua(μ₅‐1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dicadmium(II)] dihydrate], {[Cd₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)₂(H₂O)]·2H₂O}_n, was crystallized from a mixture of 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylic acid (H₄bpta), 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐bib) and cadmium nitrate in water–dimethylformamide. The crystal structure consists of two crystallographically independent Cd^II cations, with one of the Cd^II cations possessing a slightly distorted pentagonal bipyramidal geometry. The second Cd^II centre is coordinated by carboxylate O atoms and imidazole N atoms from two separate 1,4‐bib ligands, displaying a distorted octahedral CdN₂O₄ geometry. The completely deprotonated bpta⁴⁻ ligand, exhibiting a new coordination mode, bridges five Cd^II cations to form one‐dimensional chains viaμ₃‐η¹:η²:η¹:η² and μ₂‐η¹:η¹:η⁰:η⁰ modes, and these are further linked by 1,4‐bib ligands to form a three‐dimensional framework with a (4².6⁴)(4.6²)(4³.6⁵.7²) topology. The structure of the coordination polymer is reinforced by intermolecular hydrogen bonding between carboxylate O atoms, aqua ligands and crystallization water molecules. The solid‐state photoluminescence properties were investigated and the complex might be a candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Preparation,Crystal Structure and Properties of a New Crystal Form of Diammonium 5,5′‐bistetrazole‐1,1′‐diolate

A new crystal form of diammonium 5,5′‐bistetrazole‐1,1′‐diolate ( 1 ) was prepared by two novel methods and fully characterized by using IR, NMR spectroscopy, elementary analysis, single crystal X‐ray crystallography and thermal gravity/differential thermal analysis (TG/DTA). Crystalline 1 was found as monoclinic and space group of P21/c (14). The TG/DTA analysis showed that the decomposition temperature of 1 was 287.8°C with a mass loss of 91.2% in the range of 220–300°C at a heating rate of 5°C/min. The sensitivities test towards impact, friction of 1 indicated that 1 has much lower sensitivities than those of RDX/HMX and is comparable to those of TNT, which suggested that 1 could be used as a good candidate of new insensitive energetic compound.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

The kinetics of polycondensation of α,α′‐dichloro‐p‐xylene with 4,4′‐isopropylidenediphenol using benzyltriethylammonium chloride as a phase‐transfer catalyst

The phase‐transfer catalyzed polycondensation of α,α′‐dichloro‐p‐xylene with 4,4′‐isopropylidenediphenol was carried out using benzylethylammonium chloride in a two‐phase system of an aqueous alkaline solution and benzene at 60 °C under nitrogen atmosphere. The rate of polycondensation was expressed as the combined terms of quaternary onium cation and 4,4′‐isopropylidenediphenolate anion rather than the feed concentration of catalyst and 4,4′‐isopropylidenediphenol. The measured concentrations of hydroxide and chloride anion in the aqueous solution and α,α′‐dichloro‐p‐xylene in the organic phase were used to obtain the reaction rate constant with the integral method, and to analyze the polycondensation mechanism with a cyclic phase‐transfer initiation step in the heterogeneous liquid–liquid system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3059–3066, 2000     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Unexpected Spiroproducts from the Reaction of N‐Benzoylglycine with Ortho‐Formylbenzoic Acids −3,5′‐Dioxo‐2′‐Phenyl‐1,3‐Dihydrospiro[Indene‐2,4′‐[1,3]Oxazol]‐1‐yl Acetates: Establishments of Their Structure

This paper describes a method of preparation of new 3,5′‐dioxo‐2′‐phenyl‐1,3‐dihydrospiro[indene‐2,4′‐[1,3]oxazol]‐1‐yl acetate and its 5‐chloro‐ and bromoderivatives as products of interaction of N‐benzoylglycine (hippuric acid) with corresponding ortho‐formylbenzoic acids. The reaction carried out in acetic anhydride media in the presence of piperidine as catalyst. The novel spirocompounds were purified by column chromatography from multicomponent reaction mixtures. The composition of the spiro‐products was confirmed by C, H, N element analysis. The structure was established by IR, MS, ¹H‐ and ¹³C‐NMR analysis including COSY ¹H‐¹³C experiments.     

A three‐dimensional ZnII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands exhibiting photoluminescence

Ligands based on polycarboxylic acids are excellent building blocks for the construction of coordination polymers; they may bind to a variety of metal ions and form clusters, as well as extended chain or network structures. Among these building blocks, biphenyltetracarboxylic acids (H₄bpta) with C ₂ symmetry have recently attracted attention because of their variable bridging and multidentate chelating modes. The new luminescent three‐dimensional coordination polymer poly[(μ₅‐1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dizinc(II)], [Zn₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)]_n , was synthesized solvothermally and characterized by single‐crystal X‐ray diffraction, elemental analysis and IR spectroscopy. The crystal structure contains two crystallographically independent Zn^II cations. Both metal cations are located on twofold axes and display distorted tetrahedral coordination geometries. Neighbouring Zn^II centres are bridged by carboxylate groups in the syn –anti mode to form one‐dimensional chains. Adjacent chains are linked through 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands to form a three‐dimensional network. In the solid state, the compound exhibits blue photoluminescence and represents a promising candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

Nitrogen‐Rich Compounds of the Lanthanoids: The 5,5′‐Azobis[1H‐tetrazol‐1‐ides] of some Yttric Earths (Tb,Dy, Ho,Er, Tm,Yb, and Lu)

A set of N‐rich salts, 3 – 9 , of the heavy lanthanoids (terbium, 3 ; dysprosium, 4 ; holmium 5 ; erbium, 6 ; thulium, 7 ; ytterbium, 8 ; lutetium, 9 ) based on the energetic 5,5′‐azobis[1H‐tetrazole] (H₂ZT) was synthesized and characterized by elemental analysis, vibrational (IR and Raman) spectroscopy, and X‐ray structure determination. The synthesis of the lanthanoid salts 3 – 9 was performed by crystallization from concentrated aqueous solutions of disodium 5,5′‐azobis[1H‐tetrazol‐1‐ide] dihydrate (Na₂ZT?2 H₂O; 1 ) and the respective Ln(NO₃)₃?5 H₂O and yielded large rhombic crystals of the type [Ln(H₂O)₈]₂(ZT)₃?6 H₂O in ca. 70% of the theoretical yield. The compounds 3 – 9 are isostructural (triclinic space group P ) to the previously published yttrium salt 2 ; they show, however, a clear lanthanoid contraction of several crystallographic parameters, e.g., the cell volume or the Ln? O bond lengths of the Ln³⁺ ions and the coordinating H₂O molecules. The lanthanoid contraction influences the strengths of the H‐bonds, which can be observed as a red shift by 4 cm^?1 in the characteristic IR band, in particular from 3595 cm^?1 ( 3 ) to 3599 cm^?1 ( 9 ). In good agreement with previous works, 2 – 9 are purely salt‐like compounds without a coordinative bond between the tetrazolide anion and the Ln³⁺ cation.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Syntheses,Structures and Characterization of Four Metal‐Organic Frameworks constructed by 2,2′,6,6′‐Tetramethoxy‐4,4′‐biphenyldicarboxylic Acid

Four metal‐organic frameworks (MOFs), {[Mn_3.5L(OH)(HCOO)₄(DMF)] · H₂O} ( 1 ), {[In_2.5L₂O(OH)_1.5(H₂O)₂] · DMF · CH₃CN · 2H₂O} ( 2 ), {[Pb₄L₃O(DMA)] · CH₃CN} ( 3 ), and {[LaL(NO₃)(DMF)₂] · 2H₂O} ( 4 ) were synthesized by utilizing the ligand 2,2′,6,6′‐tetramethoxy‐4,4′‐biphenyldicarboxylic acid (H₂L) via solvothermal methods. All MOFs were characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction, thermogravimetric analysis, and infrared spectroscopy. In 1 , the Mn²⁺ ions are interconnected by formic groups in situ produced via DMF decomposition to form a rare 2D macrocyclic plane, which is further linked by L^2– to construct the final 3D network. In 2 , 1D zip‐like infinite chain is formed and then interconnected to build the 3D framework. In 3 , a [Pb₆(μ₄‐O)₂(O₂C)₁₀(DMA)₂] cluster with a centrosymmetric [Pb₆(μ₄‐O)₂]⁸⁺ octahedral core is formed in the 3D structure. In 4 , the La³⁺ ions are connected with each other through carboxylate groups of L^2– to generate 1D zigzag chain, which is further linked by L^2– to construct a 3D network with sra topology. Solid photoluminescence properties of 3 and 4 were also investigated.     

Synthesis,crystal structure and magnetic properties of (acetato‐κ2O,O′)bis(5,5′‐dimethyl‐2,2′‐bipyridine‐κ2N,N′)nickel(II) perchlorate monohydrate

The title hydrated ionic complex, [Ni(CH₃COO)(C₁₂H₁₂N₂)₂]ClO₄·H₂O or [Ni(ac)(5,5′‐dmbpy)₂]ClO₄·H₂O (where 5,5′‐dmbpy is 5,5′‐dimethyl‐2,2′‐bipyridine and ac is acetate), (1), was isolated as violet crystals from the aqueous ethanolic nickel acetate–5,5′‐dmbpy–KClO₄ system. Within the complex cation, the Ni^II atom is hexacoordinated by two chelating 5,5′‐dmbpy ligands and one chelating ac ligand. The mean Ni—N and Ni—O bond lengths are 2.0628 (17) and 2.1341 (15) Å, respectively. The water solvent molecule is disordered over two partially occupied positions and links two complex cations and two perchlorate anions into hydrogen‐bonded centrosymmetric dimers, which are further connected by π–π interactions. The magnetic properties of (1) at low temperatures are governed by the action of single‐ion anisotropy, D, which arises from the reduced local symmetry of the cis‐NiO₂N₄ chromophore. The fitting of the variable‐temperature magnetic data (2–300 K) gives g_iso = 2.134 and D/hc = 3.13 cm⁻¹.     

Magnetic nanoparticle γ‐Fe2O3‐immobilized 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a highly recyclable and efficient nanocatalyst for the synthesis of α′‐oxindole‐α‐hydroxyphosphonates

Magnetic nanoparticle γ‐Fe₂O₃‐immobilized 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a novel magnetic nanocatalyst was synthesized and characterized. The nanoparticle reagent catalyzed efficiently the synthesis of α′‐oxindole‐α‐hydroxyphosphonates from isatins and dimethyl phosphate under solvent‐free conditions at 60 °C. More importantly, the catalyst could be easily recovered by an external magnet and reused six times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.     

Ultra‐fast adenosine 5′‐triphosphate,adenosine 5′‐diphosphate and adenosine 5′‐monophosphate detection by pressure‐assisted capillary electrophoresis UV detection

Herein, we report a new CE method to measure adenine nucleotides adenosine 5′‐triphosphate, adenosine 5′‐diphosphate, and adenosine 5′‐monophosphate in red blood cells. For this purpose, 20 mmol/L sodium acetate buffer at pH 3.80 was used as running electrolyte, and the separation was performed by the simultaneous application of a CE voltage of 25 kV and an overimposed pressure of 0.2 psi from inlet to outlet. A rapid separation of these analytes in less than 1.5 min was obtained with a good reproducibility for intra‐ and inter‐assay (CV<4 and 8%, respectively) and an excellent analytical recovery (from 98.3 to 99%). The applicability of our method was proved by measuring adenine nucleotides in red blood cells.