Highly efficient mechanochemical scission of silver-carbene coordination polymers

The ultrasound-induced scission of silver carbene coordination complexes with polytetrahydrofuran-functionalized N-heterocyclic carbene ligands is reported. In solution, scission is very efficient, with complete conversion within 10 min when the polymers have a molecular weight of 6.7 kDa. The mechanochemical origin of the scission is supported by the molecular weight dependence of the scission rate and by the low reactivity of the silver complex with low molecular weight ligands. The mechanochemical process at room temperature is much faster than thermal scission at 60 degreesC, which has a conversion of 30% in 18 h.     

New heterometallic coordination polymers derived form chalcogenocyanates: synthesis,characterization and electrical properties

A series of conducting mixed-metallic coordination polymers: Cu₂Pb(SCN)₄, CuPb(SeCN)₄, Cu^II _0.50Cu^IPb (SCN·SeCN)₂, CuAg(SCN)₂, CuAg(SeCN)₂ and CuAg(SCN·SeCN) have been synthesized by the reaction of Cu and Pb^II or Ag^Initrates with KSCN or KSeCN, or both KSCN and KSeCN in H₂O. Of significance are the aerobic reactions which yield heterometallic complexes viaoxidation of SCN^– and SeCN^– into (SCN)₂ and (SeCN)₂ followed by quantitative reduction of Cu^II into Cu^I; in the case of CuPb(SeCN)₄ reduction of Cu^II into Cu^I is not observed, while in Cu^{II 0.50}Cu^IPb(SCN·SeCN)₂, Cu^II is partially reduced to Cu^I. These compounds have been characterized by elemental (C, N, S and Se) analyses, magnetic moment measurements, relevant spectroscopies (i.r., far i.r., Raman, u.v.–vis. and e.p.r.), powder X-ray diffraction pattern and conductivity technique. The v(CN) vibrations in 2162–2087cm^–1 and far i.r. bands (500–100cm^–1) corroborated by Raman bands are conclusive of the bridging (N, S/Se) mode and metal-NCS and metal-SCN/SeCN^– bonding respectively in the complexes. Room temperature magnetic moment, electronic absorption spectra and e.p.r. active/silent nature confirm the oxidation state of copper in these solids. Room temperature compressed pellet conductivities _rt, 10^–9to 10^–7Scm^–1 with activation energies, E _a=0.19–0.25eV and increase in the conductivity with increase in temperature in the 305–423K, range and decrease in conductivity with decrease in temperature in the 295–200K range, show their semiconductor properties.     

A versatile route to L-hexoses: synthesis of L-mannose and L-altrose

[reaction: see text] An efficient route for the synthesis of orthogonally protected l-sugars has been opened up, starting from the heterocyclic homologating agent 1 and 2,3-O-isopropylidene-l-glyceraldehyde (2). Our synthetic path enables the synthesis of a 2,3-unsaturated-l-pyranoside, which can be suitably functionalized to afford the desired l-hexoses. In this paper, we report the synthesis of l-manno- and l-altro-pyranosides. Moreover, this strategy may be used to prepare all eight sugars and their derivatives in either enantiomeric form.     

A versatile route to benzocanthinones

Benzocanthinone (1) and five analogs (10, 12-15) were prepared by radical-induced cyclizations of halo N-aroyl derivatives of β-carboline and carbazole.     

Formation of cobalt- and lithium-containing heterometallic pyridonate carboxylate coordination polymers

The reaction of cobalt(II) chloride with 2-hydroxypyridine (Hhp) and lithium pivalate in acetonitrile affords the 1D polymer [Li₃CoCl(μ-Piv)(μ₃-Piv)₂(μ₃,η²-Piv)(μ-Hhp)₂(η¹-HPiv)] _n , in which the repeating units are linked by bridging pyridone molecules. The reaction of cobalt nitrate hexahydrate with 2-hydroxy-6-methylpyridine (Hmhp) in the presence of the deprotonating agent (Et₃N) resulted in the crystallization of the 1D polymer of the composition [Li₂Co₇(μ₃-OH)₂(μ₃-Piv)₃(μ-Piv)₂(μ₃,η²-mhp)₅(μ,η²-mhp)₂(μ₃-mhp)(μ,η²-NO₃)·2MeCN] _n , in which the bulky metal fragments {Li₂Co₇(OH)₂(Piv)₅)(mhp)₈} are linked together through the lithium atoms by chelate bridging nitrate anions. The resulting 1D polymers were characterized by X-ray diffraction, and their magnetic properties were investigated.     

A novel efficient and versatile route to the synthesis of 5-O-feruloylquinic acids

A novel synthesis of 5-O-feruloylquinic acid, a polyphenolic compound found in coffee beans, and its methyl ester derivative has been optimized. The sequence involves 6 steps and is compatible with the preparation of potential human metabolites of these compounds. The key reaction is a Knoevenagel condensation of 4-hydroxy-3-methoxy-benzaldehyde and a malonate ester of quinic acid.     

Solvothermal synthesis and structures of three novel heterometallic microporous coordination polymers assembled from 2-hydroxy-nicotinic acid

Abstract  

Three novel heterometallic microporous coordination polymers {M(Hnico)₃M′} _n (1, M = Co, M′ = K; 2, M = Ni, M′ = K; 3, M = Co, M′ = Na, Hnico is the anion of 2-hydroxy-nicotinic acid, where the proton is transferred from the phenolate hydroxy group to the nitrogen atom of imine pyridine ring) were synthesized by hydrothermal reaction between M(Ac)₂·4H₂O, M′OH and a multifunctional organic aromatic H₂nico ligand and characterized by IR spectrum, elemental analysis, raman spectrum and the single crystal X-ray diffractions. In complexes 1–3, the M²⁺ ions linked three different Hnico ligand formed [M(Hnico)₃]⁻ subunit which further interlinked the six-coordination M′⁺ cation constructed 3D network. The network topology of 1–3 can be simplified a rare 3D (4,4)-connected (4¹²6³) net.     

The mechanochemical Friedel-Crafts polymerization as a solvent-free cross-linking approach toward microporous polymers

Herein we report the mechanochemical Friedel-Crafts alkylation of 1,3,5-triphenylbenzene (TPB) with two organochloride cross-linking agents, dichloromethane (DCM) and chloroform (CHCl₃), respectively. During a thorough milling parameter evaluation, the DCM-linked polymers were found to be flexible and extremely sensitive toward parameter changes, which even enables the synthesis of a polymer with a SSA_BET of 1670 m²/g, on par with the solution-based reference. Contrary, CHCl₃-linked polymers are exhibiting a rigid structure, with a high porosity that is widely unaffected by parameter changes. As a result, a polymer with a SSA_BET of 1280 m²/g could be generated in as little as 30 minutes, outperforming the reported literature analogue in terms of synthesis time and SSA_BET. To underline the environmental benefits of our fast and solvent-free synthesis approach, the green metrics are discussed, revealing an enhancement of the mass intensity, mass productivity and the E-factor, as well as of synthesis time and the work-up in comparison to the classical synthesis. Therefore, the mechanochemical polymerization is presented as a versatile tool, enabling the generation of highly porous polymers within short reaction times, with a minimal use of chlorinated cross-linker and with the possibility of a post polymerization modification.     

A new route for preparing coordination polymers from hydrothermal reactions involving in situ ligand synthesis

The coordination chemistry of inorganic cobalt salt and the organic ligands H(4)bbh (=benzene-1,2,4,5-bihydrazide) and H(3)bcbh (=benzene-4-carboxylate-1,2-bihydrazide) generated through the in situ hydrothermal acylate reaction of H(4)bta (=benzene-1,2,4,5-tetracarboxylic acid) and H(3)btc (=benzene-1,2,4-tricarboxylic acid) with hydrazine hydrate, respectively, has been investigated. Three new coordination polymers were prepared and fully characterized by infrared spectroscopy, elemental analysis, and single-crystal X-ray diffraction. The compound [Co(micro(3)-H(2)bbh)(phen)](n)() (1) (triclinic space group P with a = 9.762(4) A, b = 10.169(4) A, c = 11.143(4) A, alpha = 80.96(3) degrees, beta = 64.49(3) degrees, gamma = 71.88(3) degrees, Z = 2) was synthesized from the reaction of CoCl(2).6H(2)O, H(4)bta (=benzene-1,2,4,5-tetracarboxylic acid), N(2)H(4).H(2)O, phen (=1,10-phenanthroline) and H(2)O, and consists of one-dimensional double-chains. [Co(micro(4)-H(2)bbh)(H(2)O)(2)](n)() (2) (monoclinic space group P2(1)/c with a = 6.8687(5) A, b = 7.5943(6) A, c = 10.0401(6) A, beta = 95.250(4) degrees, Z = 2) was generated by the combination of CoCl(2).6H(2)O, H(4)bta, N(2)H(4).H(2)O, and H(2)O. It adopts a three-dimensional structural motif in the solid state with channels consisting of 20-numbered rings. [Co(micro(3)-Hbcbh)(bpy)](n)() (3) (monoclinic space group Cc with a = 9.9464(13) A, b = 23.685(5) A, c = 7.9491 (16) A, beta = 117.677(13) degrees, Z = 4) was obtained from the mixture of CoCl(2).6H(2)O, N(2)H(4).H(2)O, H(3)btc (=benzene-1,2,4-tricarboxylic acid), bpy (=2,2'-dipyridyl), and H(2)O, and features a two-dimensional plane. The results of magnetic research indicate that there exist antiferromagnetic interactions between Co centers in both compounds 1 and 2.     

Three-dimensional 3d-4f heterometallic coordination polymers: synthesis, structures, and magnetic properties

Three new 3d-4f heterometallic coordination polymers, [Ln(2)(H(2)O)(4)M(2)(H(2)O)(2)(QA)(5)].nH(2)O (H(2)QA = quinolinic acid; Ln = Gd, M = Ni, n = 7 (1); Ln = Gd, M = Co, n = 6.5 (2); Ln = Dy, M = Co, n = 6.5 (3)), have been synthesized through hydrothermal pretreatment and cooling-down crystallization. These compounds possess the isostructural 3D frameworks with 1D chairlike channels along the c axis, which are occupied by noncoordinating water molecules. Crystal data: for 1, C(35)H(41)Gd(2)Ni(2)N(5)O(33), orthorhombic, space group Pna2(1), with a = 28.567(6) A, b = 14.498(3) A, c = 12.250(2) A, and Z = 4; for 2, C(35)H(40)Gd(2)Co(2)N(5)O(32.5), orthorhombic, space group Pna2(1), with a = 28.843(3) A, b = 14.4325(13) A, c = 12.2275(9) A, and Z = 4; for 3, C(35)H(40)Dy(2)Co(2)N(5)O(32.5), orthorhombic, space group Pna2(1), with a = 28.8471(14) A, b = 14.4534(10) A, c = 12.2520(7) A, and Z = 4. The magnetic behaviors for the three compounds have been investigated.     

A two step route to indoles from haloarenes--a versatile variation on the Fischer indole synthesis

In a new variation on the Fischer indole synthesis, readily available haloarenes are converted into a wide range of indoles in just two steps by halogen-magnesium exchange, quenching with di-tert-butyl azodicarboxylate, followed by reaction with ketones under acidic conditions.     

An efficient and versatile route to the synthesis of 9,10-dihydro-3-formylphenanthrenes

An innovative and efficient route to the synthesis of 9,10-dihydro-3-formylphenanthrenes 7 has been delineated through the ring transformation of 2-oxo-4-sec-amino-5,6-dihydro-2H-benzo[h]chromene-3-carbonitriles 4 with methyl glyoxaldimethylacetal 5 to masked 3-dimethoxymethyl-1-sec-amino-9,10-dihydrophenanthrene-3-carbonitriles 6 followed by deacetalation with Amberlyst 15 in excellent yields.     

Short and versatile route to a key intermediate for lactacystin synthesis

[reaction: see text] A key intermediate 14 for the synthesis of lactacystin 1 has been constructed in four steps and 33% overall yield. The key steps involve cyclization of a suitably functionalized glutamic acid derivative and concomitant alkylation of the resulting beta,beta-diketoester system, C-acylation of the cyclic alpha-amidoketone 9, and decarboxylbenzylation of 12. Alkylation of a related beta,beta-diketoester 5 was additionally achieved with several electrophiles.     

A solvent-free regioselective iodination route of ortho-carboranes

Tetraiodo-ortho-carborane based X-ray contrast agents can be readily prepared in a high yield, fast, clean, regioselective fashion by a solvent-free reaction of ortho-carboranes with iodine in sealed tubes.     

Tin-directed nazarov cyclizations: A versatile route to cyclopentenoids

The preparation of 1-(tri-butylstanniyl-1,4-pentadien-3-ones and their efficient Nazarov cyclizations to cyclopentenones, including a PGA analogue, are described.     

A simple and versatile route to ketomethylene dipeptide analogs

A facile and versatile procedure for the synthesis of ketomethylene dipeptides by using N^α-Z-amino acid halomethyl ketones and dimethyl malonate as starting materials is reported. By application of this method, alanyl and phenylalanyl derivatives containing C-terminal Gly, Ala, Asp, Phe and Trp residues have been prepared.     

A short and versatile route to chiral spiroketal skeletons

Different chiral spiroketal skeletons are obtained, in a versatile manner, by iterative alkylations of acetone N,N-dimethylhydrazone with iodides 2 followed by a one-pot deprotection/spirocyclization sequence. This methodology has been applied successfully to the synthesis of 1,7-dioxaspiro[5.5]undecane and 1,6-dioxaspiro[4.5]decane systems.