Glass transition of polymer/single-walled carbon nanotube composite films

The glass-transition temperatures (T_g's) of nanocomposites of polystyrene (PS) and single-walled carbon nanotubes were measured in the bulk and in thin films with differential scanning calorimetry and spectroscopic ellipsometry, respectively. The bulk T_g of the nanocomposites increased by approximately 3 °C and became much broader than that of PS. For the nanocomposite films thinner than 45 nm, T_g decreased with decreasing film thickness [i.e., ΔT_g(nano) < 0]. This phenomenon also occurred in thin PS films, the magnitude of the depression in PS [ΔT_g(PS)] being somewhat larger. The film thickness dependence and the differences in the magnitude of ΔT_g in the two systems were examined in light of current theory, and a quantitative comparison was made. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3339–3345, 2003     

Electrodeposition of iron/titania composite coatings from methanesulfonate electrolyte

The possibility of deposition of Fe/TiO₂ composite electroplated coatings from methanesulfonate electrolyte was demonstrated. The kinetics of the codeposition of dispersed phase particles is described by the Guglielmi model. Incorporation of titania particles into the iron matrix leads to enhancement of the coating microhardness due to dispersion strengthening. The Fe/TiO₂ composite coatings exhibit catalytic activity in photochemical decomposition of Methyl Orange dye in aqueous solution.     

Polymer-assisted dispersion of single-walled carbon nanotubes in alcohols and applicability toward carbon nanotube/sol-gel composite formation

Single-walled carbon nanotubes (SWCNTs) were directly dispersed into various alcohols by sonicating the nanotubes in the presence of poly(4-vinylpyridine) (P4VP). Depending upon the alcohol, it was possible to disperse up to 0.3 g of SWCNTs per liter of alcohol using only 0.6 g of P4VP, and with solution stability greater than 6 weeks. Scanning electron microscopy of "bucky" paper prepared from the polymer-treated nanotubes revealed reduced bundle size compared to the corresponding untreated nanotube paper. Additionally, the applicability of the dispersion system in the formation of SWCNT/silica composites is demonstrated.     

Reversible superhydrophobic to superhydrophilic conversion of Ag@TiO2 composite nanofiber surfaces

A new type of superhydrophobic material consisting of a surface with supported Ag@TiO(2) core-shell nanofibers has been prepared at low temperature by plasma-enhanced chemical vapor deposition (PECVD). The fibers are formed by an inner nanocrystalline silver thread which is covered by a TiO(2) overlayer. Water contact angles depend on the width of the fibers and on their surface concentration, reaching a maximum wetting angle close to 180 degrees for a surface concentration of approximately 15 fibers microm(-2) and a thickness of 200 nm. When irradiated with UV light, these surfaces become superhydrophilic (i.e., 0 degrees contact angle). The decrease rate of the contact angle depends on both the crystalline state of the titania and on the size of the individual TiO(2) domains covering the fibers. To the best of our knowledge, this is one of the few examples existing in the literature where a superhydrophobic surface transforms reversibly into a superhydrophilic one as an effect of light irradiation.     

Charge transfer from metallic single-walled carbon nanotube sensor arrays

This paper explores the possibility of using arrays of metallic carbon nanotubes as sensors. Unlike their semiconducting counterparts, single-walled carbon nanotube arrays or networks that are dominated by metallic conduction pathways have not been investigated for their environmental sensitivity. In this work, we demonstrate transduction of molecular adsorption via charge transfer through predominantly metallic single-walled carbon nanotubes. Raman spectroscopy and electric field dependent transport confirm that signal transduction takes place through primarily large diameter metallic nanotubes. This unique signal transduction mechanism might have implications for novel sensors. The scaling of the signal with array impedance is well described using an irreversible binding model developed previously. The arrays have several advantages including a simple, two-electrode fabrication, rapid regeneration, and a responsivity that scales predictably and linearly with the number of adsorption sites. An array-assisted hydrolysis of reactive analytes is found to regenerate the nanotube surface from hydrolyzable species which include important organophosphate nerve agents.     

Spectroscopic investigation of conjugated polymer/single-walled carbon nanotube interactions

Composite materials, based on single-walled carbon nanotubes and a poly(p-phenylene vinylene) derivative, show an interaction between the components capable of solubilising the nanotubes, which has not been otherwise achieved. Here these materials are characterised by electron microscopy, and optical and vibrational spectroscopy. The spectroscopic behaviour of the polymer is seen to be dramatically affected, which is attributed to conformational changes due to the effect of the nanotubes.     

Ab initio simulations of doped single-walled carbon nanotube sensors

The interactions between oxygen and nitrogen atoms with single-walled carbon nanotubes were investigated for nanotubes with two different geometrical configurations using first-principle calculations within the framework of the density functional theory. We introduced a new type of toxic gas sensor that can detect the presence of H₂, Cl₂, CO, and NO molecules. We also demonstrated that the sensitivity of this device can be controlled by the concentration of the dopants on the surface of the nanotube. In addition, the transport properties of the doped nanotube were studied for different concentrations of oxygen or nitrogen atoms that were randomly distributed on the surface of the single-walled carbon nanotube. We observed that small amounts of dopants can modify the electronic and transport properties of the nanotube and can lend metallic properties to the nanotube. Band-gap narrowing occurs when the nanotube is doped with either oxygen or nitrogen atoms.     

Importance of aromatic content for peptide/single-walled carbon nanotube interactions

We have previously demonstrated that a designed amphiphilic peptide helix, denoted nano-1, coats and debundles single-walled carbon nanotubes (SWNTs) and promotes the assembly of these coated SWNTs into novel hierarchical structures via peptide-peptide interactions. The purpose of this study is to better understand how aromatic content impacts interactions between peptides and SWNTs. We have designed a series of peptides, based on the nano-1 sequence, in which the aromatic content is systematically varied. Atomic force microscopy measurements and optical absorption spectroscopy reveal that the ability to disperse individual SWNTs increases with increasing aromatic residues in the peptide. Altogether, the results indicate that pi-stacking interactions play an important role in peptide dispersion of SWNTs.     

Exciton energy transfer-assisted photoluminescence brightening from freestanding single-walled carbon nanotube bundles

Photoluminescence (PL) brightening is clearly observed through the direct morphology transition from isolated to thin bundled vertically- and individually freestanding single-walled carbon nanotubes (SWNTs). On the basis of the precise spectra analysis and equation-based estimation of the PL time trace, the origin of the PL brightening is consistently explained in terms of the exciton energy transfer through the tube bundles. The PL brightening is also revealed to obviously depend on SWNT diameters. Only the small-diameter rich sample can realize the PL brightening, which can be explained by the different concentrations of metallic SWNTs causing a PL quenching. Since it can be possible to fabricate brightly illuminating nanotubes on various kinds of substrates, the bundle engineering with freestanding nanotubes is expected to be a potential candidate for realizing the nanotube-based PL device fabrication.     

Effect of electron-donating and electron-withdrawing groups on peptide/single-walled carbon nanotube interactions

Nano-1, a designed peptide, has been demonstrated to efficiently disperse individual single-walled carbon nanotubes (SWNTs) by folding into an amphiphilic alpha-helix wherein the phenylalanine (Phe) residues on the hydrophobic face of the helix interact via pi-stacking with the aromatic surface of the SWNT. In this study, the ability of electron-donating (hydroxyl) and electron-withdrawing (nitro) groups on the phenyl ring of Phe to affect the interactions between the peptide and SWNTs is examined by substituting the Phe residues in the nano-1 sequence with tyrosine and p-nitro-phenylalanine, respectively. Atomic force microscopy measurements and optical absorption spectroscopy revealed that the ability to disperse individual SWNTs increases with increasing electron density of the aromatic residue on the hydrophobic face of the amphiphilic helical peptides. Scanning tunneling spectroscopy (STS) and Raman analyses were used to examine the effect of noncovalent protein functionalization on the electronic properties of SWNTs. Small shifts in the Raman G band peak for the peptide/SWNT composites, as well as weak features that appear near the Fermi energy (Ef) in the STS dI/dV spectra of the peptide-coated SWNTs, are suggestive of a weak charge-transfer interaction between the peptides and the SWNTs.     

Fast preparation of hydroxyapatite/superhydrophilic vertically aligned multiwalled carbon nanotube composites for bioactive application

A method for the electrodeposition of hydroxyapatite films on superhydrophilic vertically aligned multiwalled carbon nanotubes is presented. The formation of a thin homogeneous film with high crystallinity was observed without any thermal treatment and with bioactivity properties that accelerate the in vitro biomineralization process and osteoblast adhesion.     

Well-dispersed multi-walled carbon nanotube/polyaniline composite films

Multi-walled carbon nanotube (MWNT)/polyaniline (PANI) composite films with good uniformity and dispersion were prepared by electrochemical polymerization of aniline containing well-dispersed MWNTs. The results of transmission electron microscopy (TEM) show that aniline can be used to solve MWNTs via formation of donor–acceptor complexes. Scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) revealed that the well arrangement of PANI-coated MWNTs in these films facilitated improved electron and ion transfer relative to pure PANI films and this may be due to the strong interaction between MWNTs and PANI.     

Direct fabrication of single-walled carbon nanotube macro-films on flexible substrates

We employed a floating chemical vapor deposition technique and applied a liquid (solution)-free precursor system for the fabrication of single-walled carbon nanotube macro-films on various flexible substrates from metallic foils to polymer films.     

Detection of dopamine using self-assembled diazoresin/single-walled carbon nanotube modified electrodes

Ultrathin films of diazoresin(DR)/single-walled carbon nanotube(SWNT) were fabricated on thioglycollic acid(TGA) decorated gold(Au) electrodes by the self-assembly method combined with the photocrosslinlcing technique.The electrochemical behavior of dopamine(DA) at the DR/SWNT modified electrodes was studied using the cyclic voltammetry(CV) and differential pulse voltammetry(DPV) methods.Under the optimal conditions,a linear CV response to DA concentration from 1 μmol/L to 40 μmol/L was observed,and the detection limit of DA was 2.1 ×10~(-3) μmol/L via the DPV method in the presence of 10 μmol/L of uric acid(UA) or 2.5 × 10~(-3) μmol/L via the DPV method in the presence of10 μmol/L of ascorbic acid(AA).Moreover,the modified electrodes exhibited good reproducibility and sensitivity,demonstrating its feasibility for analytical purposes.     

Electroreduction of oxygen on cobalt phthalocyanine-modified carbide-derived carbon/carbon nanotube composite catalysts

Journal of Solid State Electrochemistry - In this work, composite materials based on carbide-derived carbon (CDC) and carbon nanotubes (CNT) modified with Co phthalocyanine (CoPc) were employed as...     

A low-cost Raman spectrometer design used to study Raman scattering from a single-walled carbon nanotube

The paper discusses the design of a low cost Raman spectrometer. Single-walled nanotubes (SWNT) have been studied to demonstrate the reach of such a system. We observe both the radial-breathing mode (RBM) and the tangential mode from the SWNT. The tube diameters of the SWNT used in these experiments have been determined using RBM to be predominantly 1.4 and 1.6 nm. These are consistent with the TEM images taken of the same sample. The new method of producing SWNT using Ni-Y catalyst in electric-arc discharge method produces nanotubes with very small dispersion in diameter and high yields. The chirality of the SWNT can be deduced from their radial breathing modes, and it suggests that they are metallic in nature. Dedicated to Professor C N R Rao on his 70th birthday     

Integrated single-walled carbon nanotube/microfluidic devices for the study of the sensing mechanism of nanotube sensors

A method to fabricate integrated single-walled carbon nanotube/microfluidic devices was developed. This simple process could be used to directly prepare nanotube thin film transistors within the microfluidic channel and to register SWNT devices with the microfludic channel without the need of an additional alignment step. The microfluidic device was designed to have several inlets that deliver multiple liquid flows to a single main channel. The location and width of each flow in the main channel could be controlled by the relative flow rates. This capability enabled us to study the effect of the location and the coverage area of the liquid flow that contained charged molecules on the conduction of the nanotube devices, providing important information on the sensing mechanism of carbon nanotube sensors. The results showed that in a sensor based on a nanotube thin film field effect transistor, the sensing signal came from target molecules absorbed on or around the nanotubes. The effect from adsorption on metal electrodes was weak.     

Elastic modulus of single-walled carbon nanotube/poly(methyl methacrylate) nanocomposites

Dynamic mechanical analysis, nuclear magnetic resonance, and thermogravimetric analysis experiments were performed on pure poly(methyl methacrylate) and on in situ polymerized single-walled carbon nanotube (SWNT)/PMMA nanocomposites. The addition of less than 0.1 wt % SWNT to PMMA led to an increase in the low-temperature elastic modulus of approximately 10% beyond that of pure PMMA. The glass-transition temperature and the elastic modulus at higher temperatures of the nanocomposites remained unchanged from those of pure PMMA. These changes were associated with excessive cohesive interactions between the large-surface area nanotubes and PMMA and were not due to changes in the microstructural features of the polymer during synthesis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2286–2293, 2004     

Electrochemical sensing of bisphenol A on single-walled carbon nanotube paper electrodes

The electrochemical detection of BPA often requires modification of electrodes to overcome BPA′s slower kinetics and higher oxidation potential. This work reports a modification-free, paper electrode based on vacuum-filtered SWCNT thin film. The prepared electrode does not need to be polished or transferred into the conducting substrates. The linear sweep voltammetric detection showed a linear response from 0.5–10 μM and 25–100 μM with the experimental LOD of 1.0 μM (S/N=3). The interference study and good recovery percentage (93–105 %) in real water samples demonstrated the method‘s selectivity. The sensor can be promising for developing a simple, low-cost, portable, and paper-based BPA monitoring system.