基于[As_2W_(19)O_(67)(H_2O)]~(14-)构筑块的单核铥夹心型化合物的合成、结构及热稳定性

以缺位结构钨酸盐K_(14)[As_2W_(19)O_(67)(H_2O)]为多酸前驱体与TmCl_3·7H_2O和2,6-吡啶二羧酸反应,采用常规水溶液合成法制得了一例单核铥夹心的多酸基稀土衍生物K_8H_3[Tm(H_2O)_2(As_2W_(19)O_(67))(H_2O)]·15H_2O(1),并通过X射线单晶衍射、红外光谱、变温红外光谱、紫外光谱、热重分析等方法对该化合物进行了测试和表征.X射线单晶衍射分析表明,化合物1属于单斜晶系,P-1空间群,晶胞参数a=1.253 44(6)nm,b=1.761 45(9)nm,c=2.114 66(11)nm,α=73.300 0(10)°,β=85.771 0(10)°,γ=89.948 0(10)°.该聚阴离子是由两个{AsW9}构筑块与{WO(H_2O)}片段和铥离子相连形成的夹心结构;用热重分析和变温红外光谱对化合物1的热性质进行了研究,结果表明,化合物1阴离子结构在400℃以内是对热稳定的.     

Dititanium-containing 19-tungstodiarsenate(III) [Ti2(OH)2As2W19O67(H2O)]8-: synthesis, structure, electrochemistry, and oxidation catalysis

The dititanium-containing 19-tungstodiarsenate(III) [Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)](8-) (1) has been synthesized and characterized by IR, TGA, elemental analysis, electrochemistry, and catalytic studies. Single-crystal X-ray analysis was carried out on Cs(8)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)].2CsCl.12H(2)O (Cs-1), which crystallizes in the monoclinic system, space group P2(1)/m, with a=12.7764(19), b=19.425(3), c=18.149(3) A, beta=110.234(3) degrees, and Z=2. Polyanion 1 comprises two (B-alpha-As(III)W(9)O(33)) Keggin moieties linked through an octahedral {WO(5)(H(2)O)} fragment and two unprecedented square-pyramidal {TiO(4)(OH)} groups, leading to a sandwich-type structure with nominal C(2v) symmetry. Synthesis of 1 was accomplished by reaction of TiOSO(4) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous, acidic medium (pH 2). Polyanion 1 could also be isolated as a tetra-n-butyl ammonium (TBA) salt, {(n-C(4)H(9))(4)N}(5)H(3)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)] (TBA-1). TBA-1 was studied by cyclic voltammetry in acetonitrile (MeCN) solutions containing 0.1 M LiClO(4) and compared with the results obtained with Cs-1 in aqueous media. In MeCN, the Ti(IV) and W(VI) waves could not be separated distinctly. An important adsorption phenomenon on the glassy carbon working electrode was encountered both in cyclic voltammetry and in controlled potential electrolysis and was confirmed by Electrochemical Quartz Crystal Microbalance (EQCM) studies on a carbon film. TBA-1, dissolved in MeCN, reacts with H(2)O(2) to give peroxo complexes stable enough for characterization by UV-visible spectroscopy, cyclic voltammetry, and EQCM. TBA-1 shows high catalytic activity (TOF=11.3 h(-1)) in cyclohexene oxidation with aqueous H(2)O(2) producing products typical of a heterolytic oxidation mechanism. The stability of TBA-1 under turnover conditions was confirmed by using IR, UV-visible spectroscopy as well as cyclic voltammetry.     

Preparation and Tungsten-183 NMR Characterization of [alpha-1-P(2)W(17)O(61)](10)(-), [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-), and [alpha-2-Zn(H(2)O)P(2)W(17)O(61)](8)(-)

The preparation of the alpha-1 and alpha-2 isomers of the Wells-Dawson 17 tungsto derivatives by standard methods is accompanied by a significant proportion of the other isomer present as an impurity. In this study, the alpha-1 and alpha-2 isomers of [Zn(H(2)O)P(2)W(17)O(61)](8)(-) have been prepared in >98% purity by reacting isomerically pure K(9)Li[alpha-1-P(2)W(17)O(61)] and K(10)[alpha-2-P(2)W(17)O(61)], respectively, with ZnCl(2), while rigorously controlling the pH at 4.7. The molecules were isolated as potassium salts. For (183)W NMR and (31)P NMR characterization, both molecules were ion exchanged by cation-exchange chromatography, maintaining the pH at 4.7, to obtain the lithium salts. Removal of water and isolation of a solid sample of [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) was achieved by lyophilization at -40 degrees C. The chemical shift data from (31)P and (183)W NMR spectroscopy of the isolated [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) and [alpha-2-Zn(H(2)O)P(2)W(17)O(61)](8)(-) isomers are consistent with a mixture of the alpha-1 and alpha-2 isomers reported previously;(1) the molecules have the expected C(1) and C(s)() symmetry, respectively. The [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) isomer is stable in the pH range of 4.6-6 at temperatures <35 degrees C. Using the same ion exchange and lyophilization techniques, the lacunary [alpha-1-P(2)W(17)O(61)](10)(-) isomer was isolated as the lithium salt; characterization by (183)W NMR spectroscopy confirms the C(1) symmetry.     

Preparation and Structures of the 2.2.2-Cryptand(1+) Salts of the [Sb(2)Se(4)](2)(-), [As(2)S(4)](2)(-), [As(10)S(3)](2)(-), and [As(4)Se(6)](2)(-) Anions

2.2.2-Cryptand(1+) salts of the [Sb(2)Se(4)](2)(-), [As(2)S(4)](2)(-), [As(10)S(3)](2)(-), and [As(4)Se(6)](2)(-) anions have been synthesized from the reduction of binary chalcogenide compounds by K in NH(3)(l) in the presence of the alkali-metal-encapsulating ligand 2.2.2-cryptand (4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane), followed by recrystallization from CH(3)CN. The [Sb(2)Se(4)](2)(-) anion, which has crystallographically imposed symmetry 2, consists of two discrete edge-sharing SbSe(3) pyramids with terminal Se atoms cis to each other. The Sb-Se(t) bond distance is 2.443(1) ?, whereas the Sb-Se(b) distance is 2.615(1) ? (t = terminal; b = bridge). The Se(b)-Sb-Se(t) angles range from 104.78(4) to 105.18(5) degrees, whereas the Se(b)-Sb-Se(b) angles are 88.09(4) and 88.99(4) degrees. The (77)Se NMR data for this anion in solution are consistent with its X-ray structure (delta 337 and 124 ppm, 1:1 intensity, -30 degrees C, CH(3)CN/CD(3)CN). Similar to this [Sb(2)Se(4)](2)(-) anion, the [As(2)S(4)](2)(-) anion consists of two discrete edge-sharing AsS(3) pyramidal units. The As-S(t) bond distances are 2.136(7) and 2.120(7) ?, whereas the As-S(b) distances range from 2.306(7) to 2.325(7) ?. The S(b)-As-S(t) angles range from 106.2(3) to 108.2(3) degrees, and the S(b)-As-S(b) angles are 88.3(2) and 88.9(2) degrees. The [As(10)S(3)](2)(-) anion has an 11-atom As(10)S center composed of six five-membered edge-sharing rings. One of the three waist positions is occupied by a S atom, and the other two waist positions feature As atoms with exocyclic S atoms attached, making each As atom in the structure three-coordinate. The As-As bond distances range from 2.388(3) to 2.474(3) ?. The As-S(t) bond distances are 2.181(5) and 2.175(4) ?, and the As-S(b) bond distance is 2.284(6) ?. The [As(4)Se(6)](2)(-) anion features two AsSe(3) units joined by Se-Se bonds with the two exocyclic Se atoms trans to each other. The average As-Se(t) bond distance is 2.273(2) ?, whereas the As-Se(b) bond distances range from 2.357(3) to 2.462(2) ?. The Se(b)-As-Se(t) angles range from 101.52(8) to 105.95(9) degrees, and the Se(b)-As-Se(b) angles range from 91.82(7) to 102.97(9) degrees. The (77)Se NMR data for this anion in solution are consistent with its X-ray structure (delta 564 and 317 ppm, 3:1 intensity, 25 degrees C, DMF/CD(3)CN).     

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)h(5)Sn)(2)as(2)W(19)O(67)(H(2)O)](8)(-)

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)](8)(-) (1) has been synthesized and characterized by multinuclear NMR, IR, and elemental analysis. Single-crystal X-ray analysis was carried out on (NH(4))(7)Na[(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)].17.5H(2)O (NH(4)(-1), which crystallizes in the monoclinic system, space group P2(1)/c, with a = 18.3127(17) A, b = 24.403(2) A, c = 22.965(2) A, beta = 106.223(2) degrees, and Z = 4. Polyanion 1 consists of two B-alpha-(As(III)W(9)O(33)) Keggin moieties linked via a WO(H(2)O) fragment and two SnC(6)H(5) groups leading to a sandwich-type structure with nominal C(2)(v) symmetry. Polyanion 1 is stable in solution as indicated by the expected 6-line pattern (4:4:4:4:2:1) in (183)W NMR and the expected (119)Sn, (13)C, and (1)H NMR spectra. Synthesis of 1 was accomplished by reaction of C(6)H(5)SnCl(3) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous acidic medium (pH 2). In the solid-state structure of NH(4)(-1, neighboring polyanions are weakly bound via W-O-Na bonds leading to chains which interact with each other via the phenyl rings resulting in a 2-D assembly.     

Synthesis,structure, and magnetic properties of the single-molecule magnet [Ni(21)(cit)(12)(OH)(10)(H(2)O)(10)](16-)

The preparation of two new compounds containing the cluster [Ni(21)(cit)(12)(OH)(10)(H(2)O)(10)](16-) is presented, together with a detailed magnetic investigation of one of the compounds. We found that this cluster shows an unexpected stability and that it exists as different stereoisomers. Compound 1 contains the achiral cluster with a Delta-Lambda configuration, and compound 2 contains a pair of enantiomeric clusters with the configurations Delta-Delta and Lambda-Lambda, respectively. Magnetic measurements of 1 in the millikelvin range were necessary to determine the spin ground state of S = 3, and they also revealed a magnetic anisotropy within the ground state. A frequency-dependent out-of-phase signal was found in alternating current susceptibility measurements at very low temperatures, which indicates a slow relaxation of the magnetization. Thus, individual molecules are acting as single magnetic units, which is a rare phenomenon for nickel clusters. The energy barrier exhibited by compound 1 has been calculated to be 2.9 K.     

Sensitization of photo-reduction of the polyoxometalate anions [S(2)M(18)O(62)](4-) (M = Mo, W) in the visible spectral region by the [Ru(bpy)(3)](2+) cation

Voltammetric, photo-physical and photo-electrochemical properties of the Dawson polyoxometalate anions alpha-[S(2)M(18)O(62)](4-) (M = Mo, W) are presented, both in the presence and absence of a series of [Ru(II)L(n)](+/2+) cations [L(n) = (bpy)(3), (bpy)(2)(Im)(2), (bpy)(2)(dpq), (bpy)(2)(box) and (biq)(2)(box)]. Electrochemical processes for both the anion and Ru(II/III) couples were detected in solutions of the salts [Ru(II)L(n)](2)[S(2)M(18)O(62)] in dimethylformamide (0.1 M Bu(4)NPF(6)) by both cyclic and hydrodynamic voltammetries. Responses were also detected when the solid salts were adhered to the surface of a glassy carbon electrode in contact with an electrolyte in which they are insoluble (CH(3)CN; 0.1M Bu(4)NPF(6)). Photolysis experiments were performed on solutions of the salts [R(4)N](4)[S(2)M(18)O(62)] (R = n-butyl or n-hexyl) and [Ru(II)L(n)](2)[S(2)M(18)O(62)] at 355 and 420 nm in dimethylformamide and acetonitrile in the presence and absence of benzyl alcohol (10% v/v). When associated with [Ru(bpy)(3)](2+), the molybdate anion exhibited a large increase in the quantum yield for photo-reduction at 420 nm. The quantum yield for the tungstate analogue was lower but the experiments again provided clear evidence for sensitization of the photo-reduction reaction in the visible spectral region. The origin of this sensitization is ascribed to the new optical transition observed around 480 nm in static ion clusters {[Ru(bpy)(3)][S(2)M(18)O(62)]}(2-) and {[Ru(bpy)(3)](2)[S(2)M(18)O(62)]} present in solution. Measurable photocurrents resulted from irradiation of solutions of the anions with white light in the presence of the electron donor dimethylformamide. Evidence is also presented for possible quencher-fluorophore interactions in the presence of certain [Ru(II)L(n)](+) cations.     

Two sandwich arsenomolybdates based on the new building block As(iii)Mo(7)O(27)(9-): [Cr(2)(AsMo(7)O(27))(2)](12-) and [Cu(2)(AsMo(7)O(27))(2)](14-)

The polyanions [Cr(2)(AsMo(7)O(27))(2)](12-) () or [Cu(2)(AsMo(7)O(27))(2)](14-) () have sandwich-like structures wrapping two transition metals between two [As(iii)Mo(7)O(27)](9-) fragments, and the fragment is unprecedented and can be viewed as a mono-capped hexavacant B-alpha-Keggin subunit with a central AsO(3) group.     

The self-assembly mechanism of the Lindqvist anion [W(6)O(19)](2-) in aqueous solution: a density functional theory study

The formation mechanism is always a fundamental and confused issue for polyoxometalate chemistry. Two formation mechanisms (M1 and M2) of the Lindqvist anion [W(6)O(19)](2-) have been adopted to investigate it's self-assembly reaction pathways at a density functional theory (DFT) level. The potential energy surfaces reveal that both the mechanisms are thermodynamically favorable and overall barrierless at room temperature, but M2 is slightly dominant to M1. The formation of the pentanuclear species [W(5)O(16)](2-) and [W(5)O(15)(OH)](-) are recognized as the rate-determining steps in the whole assembly polymerization processes. These two steps involve the highest energy barriers with 30.48 kcal mol(-1) and 28.90 kcal mol(-1), respectively, for M1 and M2. [W(4)O(13)](2-) and [W(4)O(12)(OH)](-) are proved to be the most stable building blocks. In addition, DFT results reveal that the formation of [W(3)O(10)](2-) experiences a lower barrier along the chain channel.     

Theoretical Modeling of Water Exchange on [Pd(H(2)O)(4)](2+), [Pt(H(2)O)(4)](2+), and trans-[PtCl(2)(H(2)O)(2)

Density functional theory is applied to modeling the exchange in aqueous solution of H(2)O on [Pd(H(2)O)(4)](2+), [Pt(H(2)O)(4)](2+), and trans-[PtCl(2)(H(2)O)(2)]. Optimized structures for the starting molecules are reported together with trigonal bipyramidal (tbp) systems relevant to an associative mechanism. While a rigorous tbp geometry cannot by symmetry be the actual transition state, it appears that the energy differences between model tbp structures and the actual transition states are small. Ground state geometries calculated via the local density approximation (LDA) for [Pd(H(2)O)(4)](2+) and relativistically corrected LDA for the Pt complexes are in good agreement with available experimental data. Nonlocal gradient corrections to the LDA lead to relatively inferior structures. The computed structures for analogous Pd and Pt species are very similar. The equatorial M-OH(2) bonds of all the LDA-optimized tbp structures are predicted to expand by 0.25-0.30 ?, while the axial bonds change little relative to the planar precursors. This bond stretching in the transition state counteracts the decrease in partial molar volume caused by coordination of the entering water molecule and can explain qualitatively the small and closely similar volumes of activation observed. The relatively higher activation enthalpies of the Pt species can be traced to the relativistic correction of the total energies while the absolute DeltaH() values for exchange on [Pd(H(2)O)(4)](2+) and [Pt(H(2)O)(4)](2+) are reproduced using relativistically corrected LDA energies and a simple Born model for hydration. The validity of the latter is confirmed via some simple atomistic molecular mechanics estimates of the relative hydration enthalpies of [Pd(H(2)O)(4)](2+) and [Pd(H(2)O)(5)](2+). The computed DeltaH() values are 57, 92, and 103 kJ/mol compared to experimental values of 50(2), 90(2), and 100(2) kJ/mol for [Pd(H(2)O)(4)](2+), [Pt(H(2)O)(4)](2+), and trans-[PtCl(2)(H(2)O)(2)], respectively. The calculated activation enthalpy for a hypothetical dissociative water exchange at [Pd(H(2)O)(4)](2+) is 199 kJ/mol. A qualitative analysis of the modeling procedure, the relative hydration enthalpies, and the zero-point and finite temperature corrections yields an estimated uncertainty for the theoretical activation enthalpies of about 15 kJ/mol.     

Cyanide-bridged single-molecule magnet constructed by an octacoordinated [W(CN)6(bpy)]- anion

Two cyanide-bridged WV-M [M = Mn(II) (1), Co(II) (2)] bimetallic clusters were prepared by self-assembling a new molecular precursor [W(CN)6(bpy)]- and the corresponding metal complexes. Compound 1 shows a tetranuclear W2Mn2 entity, consisting of a Jahn-Teller ion, Mn(III), which serves as an anisotropic source, while compound 2 exhibits a trimeric W2Co structure. Among them, compound 1 displays slow relaxation of the magnetization, which is typical of a single-molecule magnet behavior.     

Structure,magnetism, and electrochemistry of the multinickel polyoxoanions [Ni6As3W24O94(H2O)2]17-, [Ni3Na(H2O)2(AsW9O34)2]11-, and [Ni4Mn2P3W24O94(H2O)2]17-

The three novel, multi-nickel-substituted heteropolytungstates [Ni(6)As(3)W(24)O(94)(H(2)O)(2)](17)(-) (1), [Ni(3)Na(H(2)O)(2)(AsW(9)O(34))(2)](11)(-) (2), and [Ni(4)Mn(2)P(3)W(24)O(94)(H(2)O)(2)](17)(-) (3) have been synthesized and characterized by IR, elemental analysis, electrochemistry, and magnetic studies. Single-crystal X-ray analysis was carried out on Na(16.5)Ni(0.25)[Ni(6)As(3)W(24)O(94)(H(2)O)(2)].54H(2)O, which crystallizes in the triclinic system, space group P1, with a = 17.450(4) A, b = 17.476(4) A, c = 22.232(4) A, alpha = 85.73(3) degrees, beta = 89.74(3) degrees, gamma = 84.33(3) degrees, and Z = 2, Na(11)[Ni(3)Na(H(2)O)(2)(AsW(9)O(34))(2)].30.5H(2)O, which crystallizes in the triclinic system, space group P1, with a = 12.228(2) A, b = 16.743(3) A, c = 23.342(5) A, alpha = 78.50(3) degrees, beta = 80.69(3) degrees, gamma = 78.66(3) degrees, and Z = 2, and Na(17)[Ni(4)Mn(2)P(3)W(24)O(94)(H(2)O)(2)].50.5H(2)O, which crystallizes in the monoclinic system, space group P2(1)/c, with a = 17.540(4) A, b = 22.303(5) A, c = 35.067(7) A, beta = 95.87(3) A, and Z = 4. Polyanion 1 consists of two B-alpha-(Ni(3)AsW(9)O(40)) Keggin moieties linked via a unique AsW(6)O(16) fragment, leading to a banana-shaped structure with C(2)(v)() symmetry. The mixed-metal tungstophosphate 3 is isostructural with 1. Polyanion 2 consists of two lacunary B-alpha-[AsW(9)O(34)](9)(-) Keggin moieties linked via three nickel(II) centers and a sodium ion. Electrochemical studies show that 1-3 exhibit a unique and reproducible voltammetric pattern and that all three compounds are stable in a large pH range. An investigation of the magnetic properties of 1-3 indicates that the exchange interactions within the trimetal clusters are ferromagnetic. However, for 1 and 3 intra- and intermolecular interactions between different trinuclear clusters are also present.     

一个新的铈砷钨酸盐大阴离子[As4W40O140Ce(H2O)5]^25-

合成了一新的铈砷钨酸盐[As4W40C140Ce(H2O)5]Na25·63H2O,用X射线单晶衍射法及元素分析确定了其结构。其晶胞参数为：a=3.1252(8)nm,b=2.2656(6)nm,c=1.3973(9)nm,α=β=γ90°,V=9.893(7)nm^3,空间群P21/m21/m2/n。在聚阴离子[As4W40O140Ce(H2O)5]^25-中,四个桥连WO6八面体通过相互共享两个顺式氧串联四个B-α-(AsW9O33)^9-形成环配体(As4W40O140)^28-的基本框架,四个B-α-(AsW9O33)^9-并不处在一个平面上,而是上下交错分布的。中心离子Ce(Ⅲ)未完全填充在(As4W40O140)^28-中具有八齿配位能力的S1洞穴中,而是四个桥连的WO6八面体各提供一个端基氧向Ce(Ⅲ)配位,另有五个水分子向Ce(Ⅲ)配位,Ce(Ⅲ)离子的配位数为9,该离具有C2v对称性。     

Syntheses and Crystal Structures of Complexes [Cu(C14H8N3O4Br)](C4H9NO) and [Ni(C14H9N2O3Br)](C4H9NO)

The title compounds, Cu(L1)(C4H8NHO) and Ni(L2)(C4H8NHO) (H2L1 = 5-bro- mosalicylaldehyde-p-nitrobenzoylhydrazone, H2L2 = 5-bromosalicylaldehyde-p-hydroxybenzo- ylhydrazone), have been obtained and characterized by single-crystal X-ray diffraction. Complex 1 belongs to the triclinic system, space group P1 with a = 8.6960(2), b = 9.957(2), c = 11.878(2) , α = 73.36(3), β = 78.25(3), γ = 82.64(3)o, V = 962.1(3) 3, Mr = 512.81, Z = 2, F(000) = 514, Dc = 1.770 g/cm3, μ(MoKα) = 3.251, R = 0.0337 and wR = 0.0846. Complex 2 is of monoclinic, space group P21/c with a = 13.313(2), b = 8.2096(1), c = 21.890(3) , β = 125.737(3)o, V = 1941.9(4) 3, Mr = 478.97, Z = 4, F(000) = 968, Dc = 1.638 g/cm3, μ(MoKα) = 3.085, R = 0.0356 and wR = 0.0817. The ligands form a satisfactory N2O2 square plane around the metal centers in two compounds. Different patterns of hydrogen bonds are observed owing to the presence of different substituents on aromatic ring of the acylhydrazone Schiff bases. In complex 1, square-planar copper(II) complexes are linked by intermolecular hydrogen bonds leading to zigzag infinite chains. In complex 2, the metal complexes are linked via hydrogen bonds to form corrugated sheets in a staggered fashion; 3D channels along the b axis are constructed through other non-covalent interactions between the neighboring layers.     

Synthesis and Investigation of [B(20)H(17)O(CH(2))(5)](3-), a Novel Solvent Complex of the [B(20)H(18)](4-) Ion

Reaction of the [trans-B(20)H(18)](2-) ion with the n-butoxide ion, formed in situ from reaction of n-butanol and NaH, in tetrahydropyran (THP) produces in good yield an unexpected and isolable solvent-coordinated polyhedral borane anion, [ae-B(20)H(17)O(CH(2))(5)](3-). The anticipated product of nucleophilic attack, [ae-B(20)H(17)On-Bu](4-), is not observed under the reaction conditions. The solvent-coordinated product is also formed in the presence of either ethoxide or carbamate ion but is not observed if the ethoxide or carbamate ion is not present in stoichiometric amounts. In the presence of the n-butanethiol anion, the coordinated THP ring undergoes a ring-opening reaction, yielding the [ae-B(20)H(17)O(CH(2))(5)Sn-Bu](4-) anion. Ring opening is also observed in the presence of the ethoxide ion in refluxing THP. Isolation of the previously proposed analogous solvent-coordinated tetrahydrofuran (THF) product, [ae-B(20)H(17)O(CH(2))(4)](3-), was unsuccessful; however, the product resulting from ring opening of THF by the n-butanethiol anion is reported.     

Fast tunneling Jahn–Teller isomer of the [Mn12O12(O2CC6H4-2-CH3)16(H2O)4] · S single-molecule magnet

The single-crystal X-ray structure of the single-molecule magnet [Mn₁₂O₁₂(O₂CC₆H₄-2-CH₃)₁₆(H₂O)₄] · CH₂Cl₂ · 2H₂O (complex 1) is reported. Complex 1 is a new example of a “Jahn–Teller isomer”, since it has two Mn(III) ions with abnormally oriented Jahn–Teller elongation axes. Complex 1 has a lower activation energy (U_eff = 29 K) for magnetization reversal relative to other reported [Mn₁₂O₁₂] type molecules (e.g., U_eff = 70 K for Mn₁₂Ac). Single-crystal low temperature magnetization measurements are reported that confirm that complex 1 is a single-molecule magnet. High-field electron paramagnetic resonance measurements were performed on a single crystal to give the spin Hamiltonian parameters.     

Kinetics and mechanism of the [Ru(III)(edta)(H2O)](-)-mediated oxidation of cysteine by H2O2

The kinetics and mechanism of the [Ru(III)(edta)(H(2)O)](-)-mediated oxidation of cysteine (RSH) by hydrogen peroxide (edta(4-) = ethylenediaminetetraacetate), were studied in detail as a function of both the hydrogen peroxide and cysteine concentrations at pH 5.1 and room temperature. The kinetic traces reveal clear evidence for a catalytic process in which hydrogen peroxide reacts directly with cysteine coordinated to the Ru(III)(edta) complex in the form of [Ru(III)(edta)SR](2-). A parallel process in which [Ru(III)(edta)(H(2)O)](-) first reacts with H(2)O(2) to produce [Ru(V)(edta)O](-) and subsequently oxidizes cysteine, is orders of magnitude slower than the [Ru(III)(edta)(H(2)O)](-)-mediated oxidation in which cysteine rapidly coordinates to [Ru(III)(edta)(H(2)O)](-) prior to the reaction with H(2)O(2). HPLC product analyses revealed the formation of cystine (RSSR) as major product along with cysteine sulfinic acid (RSO(2)H) in the reaction system, and established the catalytic role of [Ru(III)(edta)(H(2)O)](-). Simulations were performed to account for the rather complex kinetic traces in terms of the suggested reaction mechanism. The results of the simulations support the proposed reaction mechanism that involves the oxidation of coordinated cysteine to cysteine sulfenic acid (RSOH), which subsequently rapidly reacts with H(2)O(2) and RSH to form RSO(2)H and RSSR, respectively.