Facile preparation and electrochemical properties of large-scale Li<Subscript>1+<Emphasis Type="Italic">x</Emphasis></Subscript>V<Subscript>3</Subscript>O<Subscript>8</Subscript> nanobelts

Large-scale Li_1+x V₃O₈ nanobelts were successfully fabricated using filter paper as deposition substrate through a simple surface sol–gel method. The nanobelts were as long as tens of micrometers with widths of 0.4–1.0 μm and thickness of 50–100 nm. The nanobelts were characterized by X-ray diffration (XRD), Fourier infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM). The formation mechanism of the nanobelts was investigated, showing that the morphology of the nanobelts is mainly determined by the calcination temperature. Electrochemical properties of the Li_1+x V₃O₈ nanobelts were characterized by charge–discharge experiments, and the results demonstrate that the Li_1+x V₃O₈ nanobelts exhibit a high discharge capacity (278 mAh g⁻¹) and excellent cycling stability.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

The group-theoretical structure of the atomic g shell: connection with the alternating group <Emphasis Type="Italic">A</Emphasis><Subscript>6</Subscript> as <Emphasis Type="Italic">L</Emphasis><Subscript>2</Subscript>(9)

The special projective linear groups PSL(2ℓ + 1) or L ₂(2ℓ + 1) of order 2ℓ(2ℓ + 1)(ℓ + 1) can be used to study atomic shells of electrons with angular momentum quantum number ℓ corresponding to the atomic p, d, f, and g shells for ℓ = 1, 2, 3, 4, respectively. For the atomic g shell the group L ₂(9) is isomorphic with the alternating group A ₆ on six objects of order 360 or the symmetry group of the 5-dimensional simplex, a 5-dimensional analogue of the tetrahedron with 6 vertices and 15 edges. This leads to the subgroup chain SO(9) ⊃ SO(5) ⊃ L ₂(9) for the atomic g shell analogous to the subgroup chain SO(7) ⊃ G ₂ ⊃ L ₂(7) ≈⁷ O for the atomic f shell. In the L ₂(9) group only the representations of spherical harmonics or sums thereof, Γ(Y_ℓ), with dimensions dim Γ(Y_ℓ) or dim Γ(Y_ℓ) ± 1 divisible by 9 are found to be individually reducible to irreducible representations (irreps) or sums of irreps of L ₂(9). This leads to term groupings such as S, PD, G, PF, DH, L, PK, DI, FH, M, FI, PO, DN, HK, R, etc., of increasing total dimension for the irreps of SO(9) for various g ⁿ configurations in the atomic g shell.     

Rapid molecular typing of <Emphasis Type="Italic">Tuber melanosporum</Emphasis>, <Emphasis Type="Italic">T. brumale</Emphasis> and <Emphasis Type="Italic">T. indicum</Emphasis> from tree seedlings and canned truffles

We have developed new DNA extraction and purification procedures for investigation of mycorrhized seedlings and canned truffles. Use of these procedures on approximately 100 mg initial material enabled good sample representation. For mycorrhized seedlings, Taq polymerase inhibitors were discarded irrespective of tree species. In routine analysis we systematically used consensus primers ITS1/ITS4 to check the absence of Taq polymerase inhibitors and the presence of fungus DNA. Positive response with ITS validates other positive or negative PCR results. Absence of amplification with ITS prevents validation of other results. For canned truffles, DNA harvested from ascocarps sterilized for one and a half hours at 115°C was amplified with specific primers. We have developed consensus primers, named R12/F12, to check for the presence of amplifiable fungus DNA and the absence of Taq polymerase inhibitors. Here also, positive response with consensus R12/F12 validates other positive or negative PCR results. We have developed one primer pair specific for T. brumale and another specific for T. melanosporum. We can then characterize these two taxa, which enables the use of truffle or truffled French designations. We can also characterize T. indicum, the Asiatic black truffle that might fraudulently be sold as T. melanosporum and T. brumale. These three specific primer pairs were used independently of DNA extraction from tree seedlings or canned truffles. Our process is specific, sensitive, convenient, and quick.J.P. Douet and D. Mabru have contributed equally to this work     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Lipids from <Emphasis Type="Italic">Halostachys caspica</Emphasis> and <Emphasis Type="Italic">Halocharis hispida</Emphasis>

The composition of lipids from the aerial parts of two species of halophytes from the family Chenopodiaceae, Halostachys caspica C. A. Mey. and Halocharis hispida Bge. was determined. Neutral lipids (NL, 62.1 and 54.2%, respectively) dominated the total lipids (TL) of these plants. More than a third of the NL were esters of aliphatic alcohols and phytosterols (FAE). Fatty acids 16:0, 18:1, and 18:2 dominated the acids of FAE; 16:0, 18:1, and 18:3, the phospholipids. The principal fatty acids of glycolipids were unsaturated acids (68.3 and 75.1%) with linolenic acid dominating (44.9 and 43.5%). Presented at the 7th International Symposium on the Chemistry of Natural Compounds, Tashkent, October 16–18, 2007. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 276–278, May–June, 2009.     

Antioxidant flavonoids from <Emphasis Type="Italic">Tamus communis</Emphasis> ssp. <Emphasis Type="Italic">cretica</Emphasis>

A new flavonoid, kaempferol-3,4′-di-O-α-L-rhamnopyranoside (1), and three known flavonoids (2–4) were isolated from the aerial parts of T. communis L. The structure of the new compound was elucidated on the basis of spectroscopic data. Compounds 1 and 2 showed significant antioxidant activity (IC₅₀ 187.151 ± 0.821 μM, and 92.079±0.513 μM, respectively), whereas compounds 3 and 4 showed moderate activity in DPPH free radical scavenging assays. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 295–297, May–June, 2009.     

Glutaraldehyde-modified electrode for nonlabeling voltammetric detection of <Emphasis Type="Italic">p16</Emphasis><Superscript><Emphasis Type="Italic">INK4A</Emphasis></Superscript> gene

A nonlabeling electrochemical detection method for analyzing the polymerase-chain-reaction-amplified sequence-specific p16 ^INK4A gene, in which the basis for the covalent immobilization of deoxyribonucleic acid (DNA) probe is described, has been developed. The self-assembly process was based on the covalent coupling of glutaraldehyde (GA) as an arm molecule onto an amino-functional surface. The p16 ^INK4A gene was used as the model target for the methylation detection of early cancer diagnosis. An amino-modified DNA probe was successfully assembled on the GA-coupling surface through the formation of Schiff base under potential control. The hybridization of amino-modified DNA probes with the target was investigated by means of electrochemical measurements, including cyclic voltammetry and square wave voltammetry. Furthermore, the functions of GA coupling for sequence-specific detection were compared with those obtained based on mercaptopropionic acid. Hybridization experiments indicated that the covalent coupling of GA was suitable for the immobilization of DNA probe and was sensitive to the electrochemical detection of single-base mismatches of label-free DNA targets in hybridization. Moreover, reported probe-modified surfaces exhibited excellent stability, and the hybridization reactions were found to be completely reversible and highly specific for recognition in subsequent hybridization processes. The strategy provided the potential for taking full advantage of existing modified electrode technologies and was verified in microarray technology, which could be applied as a useful and powerful tool in electrochemical biosensor and microarray technology.     

Electrodeposition of Fe<Subscript> <Emphasis Type="Italic">x</Emphasis> </Subscript>Se<Subscript> <Emphasis Type="Italic">y</Emphasis> </Subscript> films from acidic solutions

Iron selenide (Fe_xSe_y) thin films were electrodeposited on a glassy carbon electrode (GCE) surface under constant potential and pulse potential modes. The deposition mechanism was investigated using cyclic voltammetry. Electrochemical processes at room temperature are accompanied by adsorption of selenium on the electrode surface and complicated by chemical reactions in the solution bulk. Several approaches to control the film stoichiometry were applied: varying of electrodeposition potential; the use of elevated temperatures (60–80°C) to decrease the electrode passivation and electrodissolution of interfering elements under pulse mode. The composition of Fe_xSe_y thin films was analyzed using an energy dispersive X-rays (EDX) analysis.     

A kinetic stability study of <Emphasis Type="Italic">M</Emphasis>N<Subscript>5</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Li,Na, K,and Rb)

A structure and kinetic stability study on some complexes with the general formula MN₅, where M are the alkali-metal atoms, Li, Na, K, and Rb, has been carried by using hybrid density functional methods. Complex B (C_2v) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Pyramidal structures A (C_5v) are kinetically unstable and they rapidly rearrange to the most stable planar structures B. At the QCISD(T)/6-311 + G*//B3LYP/6-311 + G* + ZPE (B3LYP/6-311 + G*) level, the decomposition barrier heights of LiN₅-B, NaN₅–B, KN₅-B, and RbN₅-B are predicted to be 19.9, 22.0, 22.5, and 23.0 kcal/mol, respectively. In addition, the rate constants of the decomposition reaction MN₅-B MN₃ + N₂ (M + Li, Na, K, and Rb) are also predicted using conventional transition state theory and canonical variational transition state theory, respectively.     

Review of Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Reductant System in the Selective Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Ag/Al₂O₃ is a promising catalyst for the selective catalytic reduction (SCR) by hydrocarbons (HC) of NO _x in both laboratory and diesel engine bench tests. New developments of the HC-SCR of NO _x over a Ag/Al₂O₃ catalyst are reviewed, including the efficiencies and sulfur tolerances of different Ag/Al₂O₃-reductant systems for the SCR of NO _x ; the low-temperature activity improvement of H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃; and the application of a Ag/Al₂O₃-ethanol SCR system with a heavy-duty diesel engine. The discussions are focused on the reaction mechanisms of different Ag/Al₂O₃-reductant systems and H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃. A SO₂-resistant surface structure in situ synthesized on Ag/Al₂O₃ by using ethanol as a reductant is proposed based on the study of the sulfate formation. These results provide new insight into the design of a high-efficiency NO _x reduction system. The diesel engine bench test results showed that a Ag/Al₂O₃-ethanol system is promising for catalytic cleaning of NO _x in diesel exhaust.     

Neutron diffraction study of dehydrogenation of titanium carbohydrides TiC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>

The possibility of the synthesis of hydrogen-nonstoichiometric cubic titanium carbide ТiС _х of high purity from powdery nonstoichiometric cubic titanium carbohydride ТiС _х H _y or nonstoichiometric titanium carbide with admixture hydrogen by annealing in a continuously maintained vacuum of no worse than 1.33 × 10^–3 Pa at temperatures of 600–750°C for several hours has been shown. Similar annealing at higher temperatures (T ≥ 800°C) does not lead to the complete removal of hydrogen from a sample due to intensive sintering. In this case, it seems that pores between sintered particles are hydrogen traps, and the release of hydrogen through the surface of sintered particles is hindered.     

The photoisomerization of <Emphasis Type="Italic">trans</Emphasis>-stilbene in Triton X-100/<Emphasis Type="Italic">n</Emphasis>-C<Subscript>5</Subscript>H<Subscript>11</Subscript>OH/H<Subscript>2</Subscript>O microemulsions

Different from organic solvent, self-assemblies are environment friendly media, and moreover, if they are used as micro-reactor, many meaningful and exciting results may be obtained. In this paper, we investigated the photoisomerization of trans-stilbene in Triton X-100/n-C₅H₁₁OH/H₂O microemulsions (a kind of self-assemblies) with different compositions and structures to establish the relationship between the reaction yields and the compositions and structures of microemulsions. The results show that the yield of cis-stilbene is increased with the increase of water content or with the decrease of Triton X-100 content, and oil in water (O/W) structure is the best structure for this reaction, which makes it possible to decrease the pollution of environment by organic solvent always used in organic reactions.     

Estimation of uncertainty in p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values determined by potentiometric titration

A procedure is presented for estimation of uncertainty in measurement of the pK(a) of a weak acid by potentiometric titration. The procedure is based on the ISO GUM. The core of the procedure is a mathematical model that involves 40 input parameters. A novel approach is used for taking into account the purity of the acid, the impurities are not treated as inert compounds only, their possible acidic dissociation is also taken into account. Application to an example of practical pK(a) determination is presented. Altogether 67 different sources of uncertainty are identified and quantified within the example. The relative importance of different uncertainty sources is discussed. The most important source of uncertainty (with the experimental set-up of the example) is the uncertainty of pH measurement followed by the accuracy of the burette and the uncertainty of weighing. The procedure gives uncertainty separately for each point of the titration curve. The uncertainty depends on the amount of titrant added, being lowest in the central part of the titration curve. The possibilities of reducing the uncertainty and interpreting the drift of the pK(a) values obtained from the same curve are discussed.     

Rapid SnCl<Subscript>2</Subscript> catalyzed phenylselenoetherification of (<Emphasis Type="Italic">Z</Emphasis>)- and (<Emphasis Type="Italic">E</Emphasis>)-hex-4-en-1-ols

A fast and efficient method for intramolecular heterocyclization of (Z)- and (E)-hex-4-en-1-ols was developed. The method does not cause side reactions of the substrates and provides the cyclic phenylselenoethers in high yields after only few minutes. A catalytic amount of SnCl₂ increased the yield, but in the presence of an equimolar amount of SnCl₂, formation of corresponding cyclic ethers were almost quantitative and reaction occurred instantaneously under extremely mild experimental conditions. Correspondence: Zorica M. Bugarčić, Department of Chemistry, Faculty of Science, University of Kragujevac, Radoja Domanovića 12, P.O.Box 60, YU-34000 Kragujevac, Serbia.     

Analysis of the fine structure of XANES spectra over Ni<Emphasis Type="Italic">K</Emphasis> edge in Ni(EtOCS<Subscript>2</Subscript>)<Subscript>2</Subscript>

The NiK edge X-ray absorption near edge spectra (XANES) of the Ni(EtOCS₂)₂ complex were measured. The theoretical NiK edge XANES spectra were calculated by the total multiple scattering and finite difference methods; the potential was calculated with a muffin-tin approximation and without it. It is shown that inclusion of the non-muffin-tin effects is important for modeling the NiK XANES spectrum for the Ni(EtOCS₂)₂ complex; good agreement with experiment was achieved only in the calculations with the total potential (without the muffin-tin approximation for the shape of the potential).     

Screening and Immobilization <Emphasis Type="Italic">Burkholderia</Emphasis> sp. GXU56 Lipase for Enantioselective Resolution of (<Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">S</Emphasis>)-Methyl Mandelate

Microorganisms producing lipase were isolated from soil and sewage samples and screened for enantioselective resolution of (R,S)-methyl mandelate to (R)-mandelic acid. A strain designated as GXU56 was obtained and identified as Burkholderia sp. Preparing immobilized GXU56 lipase by simple adsorption on octyl sepharose CL-4B, the optimum temperature was shifted from 40 °C (free lipase) to 50 °C (immobilized lipase), and the optimum pH was shifted from 8.0 (free lipase) to 7.2 (immobilized lipase). The immobilized enzyme displayed excellent stability in the pH range of 5.0–8.0, at the temperatures below 50 °C and in organic solvents compared with free enzyme. Enantioselectivity ratio for (R)-mandelic acid (E) was dramatically improved from 29.2 to more than 300 by applying immobilized lipase in the resolution of (R,S)-methyl mandelate. After five cycles of use of immobilized lipase, conversion and enantiomeric excess of (R)-mandelic acid were 34.5% and 98.5%, respectively, with enantioselectivity ratio for (R)-mandelic acid (E) of 230. Thus, octyl-sepharose-immobilized GXU56 lipase can be used as a bio-resolution reagent for producing (R)-mandelic acid.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).