Application of the NT solvent nucleophilicity scale to attack at phosphorus: solvolyses of N,N,N',N'-tetramethyldiamidophosphorochloridate

The specific rates of solvolysis of N,N,N',N'-tetramethyldiamidophosphorochloridate have been measured at 25.0 degrees C in 31 solvents. Analysis with the extended Grunwald-Winstein equation leads to sensitivities toward changes in solvent nucleophilicity (l) of 1.20 +/- 0.07 and toward changes in solvent ionizing power (m) of 0.69 +/- 0.04. The correlation is improved by omission of the four data points for 2,2,2-trifluoroethanol-ethanol mixtures (F-test value from 155 to 320) with very small reductions in both l and m values. Activation parameters are reported for eight of the solvolyses. The l and m values are very similar to those previously reported for solvolyses of several arenesulfonyl chlorides, consistent with a concerted substitution process. This assignment is supported by a large k(Cl)/k(F) ratio for hydrolysis and a corresponding ratio for hydroxide-assisted hydrolysis of 178. The stereochemistry of nucleophilic attack at tetracoordinate phosphorus(V) is discussed.     

S(N)2 Mechanism for Alcoholysis, Aminolysis, and Hydrolysis of Acetyl Chloride

First-order solvolysis rate constants are reported for solvolyses of acetyl chloride in methanol and MeOD, and in binary aqueous mixtures with acetone, acetonitrile, ethanol, methanol, and trifluoroethanol at 0 degrees C. Product selectivities (S = [MeCOOR]/[MeCOOH] x [water]/[alcohol]) are reported for solvolyses in ethanol/ and methanol/water at 0 degrees C. Solvolyses of acetyl chloride show a high sensitivity to changes in solvent ionizing power, consistent with C-Cl bond cleavage. As the solvent is varied from pure ethanol (or methanol) to water, S values and rate-rate profiles show no evidence for the change in reaction channel observed for solvolyses of benzoyl and trimethylacetyl chlorides. However, using rate ratios in 40% ethanol/water and 97% trifluoroethanol/water (solvents of similar ionizing power but different nucleophilicities) to compare sensitivities to nucleophilic attack, solvolyses of acetyl chloride are over 20-fold more sensitive to nucleophilic attack than benzoyl chloride. The solvent isotope effect of 1.29 (MeOH/MeOD) for acetyl chloride is similar to that for p-methoxybenzoyl chloride (1.22) and is lower than for benzoyl chloride (1.55). Second-order rate constants for aminolyses of acetyl chloride with m-nitroaniline in methanol at 0 degrees C show that acetyl chloride behaves similarly to p-methoxybenzoyl chloride, whereas benzoyl chloride is 40-fold more sensitive to the added amine. The results indicate mechanistic differences between solvolyses of acetyl and benzoyl chlorides, and an S(N)2 mechanism is proposed for solvolyses and aminolyses by m-nitroaniline of acetyl chloride (i.e. these reactions are probably not carbonyl additions, but a strong sensitivity to nucleophilic attack accounts for their high rates).     

Rate and product studies in the solvolyses of N,N-dimethylsulfamoyl and 2-propanesulfonyl chlorides

Contrary to earlier suggestions of an S(N)1 pathway for solvolyses of N,N-dimethylsulfamoyl chloride (1), an extended Grunwald-Winstein equation treatment of the specific rates of solvolysis in 32 solvents shows an appreciable sensitivity towards changes in both solvent nucleophilicity and solvent ionizing power. The actual values are very similar to those obtained in earlier studies of the solvolyses of sulfonyl and phosphoryl chlorides, solvolyses which are believed to proceed by an S(N)2 pathway. The observation of similar selectivities in aqueous-alcohol solvents further supports this assignment. In a recent report, an addition-elimination (association-dissociation) pathway was proposed for solvolyses of 2-propanesulfonyl chloride (2). A severe multicollinearity problem has been removed by the addition of several specific rates of solvolysis in fluoroalcohol-containing solvents. The new analyses using the extended Grunwald-Winstein equation lead to sensitivities similar to those for and the previously studied related compounds, and these solvolyses are also best described as following an S(N)2 pathway.     

Rate and Product Studies in the Solvolyses of Two Cyclic Phosphorochloridate Esters

Kinetic and product studies of the solvolyses of acyclic phosphorochloridates are extended to two cyclic diesters, 2-chloro-1,3,2-dioxaphospholane-2-oxide (1) and 2-chloro-5,5-dimethyl-1,3,2-dioxaphosphorinane-2-oxide (2). Slightly faster solvolyses are observed for 1 than for the acyclic dimethyl phosphorochloridate (3), and 2 solvolyzes somewhat slower than 3. An extended Grunwald–Winstein equation treatment shows similar sensitivities to changes in solvent nucleophilicity and solvent ionizing power for 1, 2, and 3, and a concerted S_N2 attack is proposed in each case. Product studies for the solvolyses of 2 in aqueous alcohols are presented.

     

Mechanisms of solvolyses of acid chlorides and chloroformates. Chloroacetyl and phenylacetyl chloride as similarity models

[reaction: see text] Rate constants and product selectivities (S = ([ester product]/[acid product]) x ([water]/[alcohol solvent]) are reported for solvolyses of chloroacetyl chloride (3) at -10 degrees C and phenylacetyl chloride (4) at 0 degrees C in ethanol/ and methanol/water mixtures. Additional kinetic data are reported for solvolyses in acetone/water, 2,2,2-trifluoroethanol(TFE)/water, and TFE/ethanol mixtures. Selectivities and solvent effects for 3, including the kinetic solvent isotope effect (KSIE) of 2.18 for methanol, are similar to those for solvolyses of p-nitrobenzoyl chloride (1, Z = NO(2)); rate constants in acetone/water are consistent with a third-order mechanism, and rates and products in ethanol/ and methanol/water mixtures can be explained quantitatively by competing third-order mechanisms in which one molecule of solvent (alcohol or water) acts as a nucleophile and another acts as a general base (an addition/elimination reaction channel). Selectivities increase for 3 as water is added to alcohol. Solvent effects on rate constants for solvolyses of 3 are very similar to those of methyl chloroformate, but acetyl chloride shows a lower KSIE, and a higher sensitivity to solvent-ionizing power, explained by a change to an S(N)2/S(N)1 (ionization) reaction channel. Solvolyses of 4 undergo a change from the addition/elimination channel in ethanol to the ionization channel in aqueous ethanol (<80% v/v alcohol). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions, calculated using Gaussian 03 (HF/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-311G(d,p) MO theory).     

Use of the Simple and Extended Grunwald-Winstein Equations in the Correlation of the Rates of Solvolysis of Highly Hindered Tertiary Alkyl Derivatives

The original Grunwald-Winstein equation (1948) involved the development of a scale of solvent ionizing power (Y). Subsequent work has refined this scale and involved the development of scales of solvent nucleophilicity (N) and a term to correct for deviations when aromatic rings are present, governed by the aromatic ring parameter (I). These three scales, and the sensitivities towards each, can be related to specific rates of solvolysis through linear free energy relationships (LFERs).One important area of application of LFERs has been to the solvolyses of tert-alkyl halides. It has been proposed that the solvolysis of tert-butyl chloride involves a nucleophilic component, although other workers have suggested that the effects observed are related to electrophilic not nucleophilic influences. Takeuchi (1997) studied a compound with two of the methyl groups of tert-butyl chloride replaced by neopentyl groups. For this highly-hindered substrate there was no evidence for nucleophilic participation. Liu (1998) and Takeuchi (2001) have reported concerning the solvolyses of additional significantly-hindered tertiary alkyl chlorides. Liu (2009) has presented a parallel study of bromides. Martins (2008) has considered hindered tertiary alkyl halides, mainly with carbon-carbon multiple bonds as substituents. It was proposed that the hI term was of importance, with the sensitivities (h) sometimes positive and sometimes negative. To explain negative values, it was suggested that the I scale might contain a nucleophilicity component. In this review, we bring together, with analysis and commentary, the work of Takeuchi, Liu, Martins and others concerning the solvolyses of tertiary alkyl halides, with emphasis on the relevance of the three scales that have been developed for use in Grunwald-Winstein correlations.     

Structural effects on the solvolytic reactivity of carboxylic and sulfonic acid chlorides. Comparisons with gas-phase data for cation formation

Kinetic data for solvolyses of 28 acid chlorides in 97% w/w trifluoroethanol (TFE)-water spanning over 10 (9) in rate constant at 25 degrees C are obtained directly or by short extrapolation from published values. G3 calculations of the energy required for cation formation in the gas phase are validated from proton affinities and from other experimental data. G3 calculations of heterolytic bond dissociation enthalpies (HBDEs) for formation of cations from acid chlorides in the gas phase show the following trends when compared with the solvolysis rate constants: (i) electron-rich sulfonyl chlorides and most carboxylic acid chlorides, including thione derivatives, give a satisfactory linear correlation with a significant negative slope; (ii) most sulfonyl chlorides and some chloroformates and thio derivatives have higher HBDEs and fit another correlation with a small, negative slope. A significant deviation is observed for the acyl series (RCOCl), for which both solvolysis rates and HBDEs increase in the order R = Bu ( t ) < Pr ( i ) < Et < Me. The deviation may be explained either by a prior hydration mechanism or preferably by electrostatic effects on the formation of small cations. The above results of structural effects support independent evidence from solvent effects that cationic ionization reaction pathways (with nucleophilic solvent assistance or S N2 character) are involved in the solvolyses of acid chlorides.     

Solvent polarity and organic reactivity in mixed solvents: evidence using a reactive molecular probe to assess the role of preferential solvation in aqueous alcohols

Product selectivities [S = ([ester product]/[acid product]) x ([water]/[alcohol solvent])] are reported for solvolyses of p-methoxybenzoyl chloride (2) in aqueous methanol, ethanol, 2,2,2-trifluoroethanol, n-propyl alcohol, isopropyl alcohol, and tert-butyl alcohol at 25, 35, and 45 degrees C. S values are small and depend significantly on the alcohol cosolvent, varying from 1.3 in methanol to 0.1 in tert-butyl alcohol, but S depends only slightly on the solvent composition, and on the temperature. As S adjusts the product ratios for changes in bulk solvent compositions, it is suggested that preferential solvation by either alcohol or water at the reaction site is not a major factor influencing rates or products. Logarithms of rates of solvolyses of 2 correlate well with Kosower Z values (based on solvatochromism). In contrast, another solvatochromic polarity index, E(T)(30), shows "dispersion" in correlations with the solvent ionizing power parameter, Y(OTs), probably due to aromatic ring and other solvation effects.     

Correlation of the Rates of Solvolysis of the Benzhydryldimethylsulfonium Ion. Application of the Aromatic Ring Parameter(1)

Values for the specific rates of solvolysis of the benzhydryldimethylsulfonium ion in 34 solvents have been analyzed using various forms of the extended Grunwald-Winstein equation. The specific rates are insensitive toward changes in solvent nucleophilicity (N(T)) values, and they correlate best against a combination of Y(+) values (based on the solvolyses of the 1-adamantyldimethylsulfonium ion) and aromatic ring parameter (I) values. Common-molecule return is observed, being especially powerful in solvents rich in fluoro alcohol; the logarithm of the associated mass law constant correlates inversely with the solvent N(T) values. The product selectivities in ethanol-water mixtures are also consistent with an S(N)1 mechanism for the solvolyses.     

Efficient Suzuki-Miyaura coupling of (hetero)aryl chlorides with thiophene- and furanboronic acids in aqueous n-butanol

An efficient Suzuki cross-coupling protocol enables the reaction of N-hetero and normal aryl chlorides with thiophene- and furanboronic acids. Coupling is effected in aqueous n-butanol as the solvent in near quantitative yield with a catalyst loading of 0.1-1 mol %. For heterocyclic substrates aqueous catalysis is found to be more efficient than Suzuki coupling under anhydrous conditions. The developed Suzuki coupling procedure utilizes biodegradable solvents and is useful for large scale reactions, as it includes the facile product separation from a biphasic solvent mixture without the need for additional organic solvents during workup.     

Solvolyses of 2-Deoxy-alpha- and beta-D-Glucopyranosyl 4'-Bromoisoquinolinium Tetrafluoroborates

The solvolyses of 2-deoxy-alpha- and beta-D-glucopyranosyl 4'-bromoisoquinolinium tetrafluoroborates (1 and 2) were monitored in aqueous methanol, ethanol, trifluoroethanol, and binary mixtures of ethanol and trifluoroethanol. The observed rate constants are consistent with the solvolyses of 1 and 2 proceeding via dissociative (D(N) A(N)) transition states. In comparison to the alpha-anomer, solvolysis of the beta-compound gives a greater transition state charge delocalization onto the ring oxygen atom. Analysis of the solvolysis product ratios indicates that the 2-deoxyglucosyl oxacarbenium ion is not solvent-equilibrated in the solvent mixtures studied. In the solvolysis of compound 1, the solvent trifluoroethanol facilitates diffusional separation of the leaving group and, in so doing, promotes the formation of the retained trifluoroethyl glycoside.     

Isotope Effects in the Solvolysis of Sterically Hindered Arenesulfonyl Chlorides

Solvent isotope effects in the ethanolysis of sterically hindered arenesulfonyl chlorides ruled out a proton transfer in the rate‐determining step and agreed with a S_N2 mechanism involving at least a second solvent molecule in the transition state (TS). The lack of a secondary kinetic isotope effect in the o‐alkyl groups allows us to disregard the possible contribution of σ–π hyperconjugation. The measured activation parameters are consistent with a S_N2 mechanism involving the participation of solvent molecules in the TS, possibly forming a cyclic TS through a chain of solvent molecules.     

Synthesis of S‐Aryl Arenethiosulfonates from N,N‐Di(arenesulfonyl)hydrazines: Reduction of Sulfonyl Chlorides with an Organic Reagent

N,N‐Di(arenesulfonyl)‐N′,N′‐dimethyl‐hydrazines, readily prepared from arenesulfonyl chlorides and N,N‐dimethylhydrazine, were heated at 120°C in chlorobenzene to give S‐aryl arenethiosulfonates, ArSSO₂Ar, in good yields.     

Additivity rules using similarity models for chemical reactivity: calculation and interpretation of electrofugality and nucleofugality

A recently proposed, multi-parameter correlation: log k (25 degrees C)=s(f) (Ef + Nf), where Ef is electrofugality and Nf is nucleofugality, for the substituent and solvent effects on the rate constants for solvolyses of benzhydryl and substituted benzhydryl substrates, is re-evaluated. A new formula (Ef=log k (RCl/EtOH/25 degrees C) -1.87), where RCl/EtOH refers to ethanolysis of chlorides, reproduces published values of Ef satisfactorily, avoids multi-parameter optimisations and provides additional values of Ef. From the formula for Ef, it is shown that the term (sfxEf) is compatible with the Hammett-Brown (rho+sigma+) equation for substituent effects. However, the previously published values of N(f) do not accurately account for solvent and leaving group effects (e.g. nucleofuge Cl or X), even for benzhydryl solvolyses; alternatively, if the more exact, two-parameter term, (sfxNf) is used, calculated effects are less accurate. A new formula (Nf=6.14 + log k(BX/any solvent/25 degrees C)), where BX refers to solvolysis of the parent benzhydryl as electrofuge, defines improved Nf values for benzhydryl substrates. The new formulae for Ef and Nf are consistent with an assumption that sf=1.00(,) and so improved correlations for benzhydryl substrates can be obtained from the additive formula: log k(RX/any solvent/25 degrees C)=(Ef + Nf). Possible extensions of this approach are also discussed.     

Mechanisms of the reactions of substituted iso-quinoline and quinoline N-oxides with arenesulfonyl chlorides

The rearrangements of substituted iso-quinoline and quinoline N-oxides with arenesulfonyl chlorides have been carried out to clarify the mode of migration of the arenesulfonoxy group by means of both ¹⁸O tracer and kinetic experiments. In the rearrangements of N-arenesulfonoxy-iso-carbostyril and carbostyril, the main migration route of the arenesulfonoxy group is via the solvent separated ion pair path with a minor portionpassing throug step appears to be N---O bond cleavage. For 1-amino-iso-quinoline N-oxide the migration of tosyloxy group to 1-amino-4-tosyloxyiso-quinoline through the oxygen-bridged ion pair pathway is so fast that the presence of the anhydro base cannot be detected. Reaction of 2-aminoquinoline N-oxide to afford 2-amino-6-tosyloxyquinoline which involves migration to a distant position proceeds rapidly, apparently through the solvent separated ion pair path.     

Synthesis of 1-Acyl- and 1-Arylsulfonyl Derivatives of 3,5-Diamino-1,2,4-triazole

Acylation of 3,5-diamino-1,2,4-triazole with anhydrides and chlorides of alkane- and arenecarboxylic acids and arenesulfonyl chlorides in aqueous solutions and under phase-transfer catalysis was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 790–795.Original Russian Text Copyright © 2005 by Chernyshev, Gaidukova, Zemlyakov, Taranushich.     

Reactions of arylcarbamoyl chlorides—I : The spontaneous formation of aryl isocyanates

Equilibrium and rate constants of formation of isocyanates from arylcarbamoyl chlorides have been measured in acetonitrile. Electronic effects upon the rate constants are very small, but the equilibrium constants follow the Hammett equation, using σ^?, and ? = ?0·52, and ortho Me groups increase the equilibrium constant. These results suggest a concerted, and possibly four center, mechanism of elimination of HCl.     

Kinetic studies on the oxidation of aryl methyl sulfides and sulfoxides by dimethyldioxirane; absolute rate constants and activation parameters for 4-nitrophenyl methyl sulfide and sulfoxide

The oxidations of methyl 4-nitrophenyl sulfide and sulfoxide by dimethyldioxirane, in acetone and mixtures of acetone with water, methanol, acetonitrile and hexane, have been followed by UV-Vis spectroscopy to monitor the decay of the substrates. The data show that, under all the conditions studied, both oxidations obey second-order kinetics. Grunwald-Winstein and Kamlet-Taft analyses of the influence of solvents on the second-order rate constants have been used to obtain mechanistic information on the two reactions. Activation parameters for the two oxidations in acetone and aqueous acetone have been calculated from rate constants for reactions in the temperature range 283-313 K and compared with those from sulfide and sulfoxide oxidations with other oxidants. For sulfoxide oxidations in acetone and 1-20% v/v water in acetone, the results support a concerted nucleophilic displacement by sulfur of oxygen from dimethyldioxirane with the rate being dependent on the solvent's polarity. Sulfide oxidations in acetone and 1-5% v/v water in acetone also proceed by a concerted mechanism. However, in the most polar solvent system studied, 20% v/v water in acetone, the mechanism changes in favour of a two-step reaction involving a betaine intermediate. Importantly, the sulfide oxidation shows a different solvent dependence to that of the sulfoxide, with the rate of oxidation being determined by the hydrogen bond donor capacity and electron-pair donicity of the solvent.     

Benzazoles: I. Regioselective arylsulfonylation of benzimidazol-2-amine

Benzimidazol-2-amine reacted with arenesulfonyl chlorides in the presence of triethylamine in regioselective fashion at the endocyclic nitrogen atom, the exocyclic amino group remaining intact. The yields of 1-arylsulfonylbenzimidazol-2-amines depend on the electronic properties of substituents in the benzene ring of arenesulfonyl chlorides.     

Rate and product studies with benzyl and p-nitrobenzyl chloroformates under solvolytic conditions

The specific rates of solvolysis of p-nitrobenzyl chloroformate are well correlated using the extended Grunwald-Winstein equation, with a high sensitivity (l) to changes in solvent nucleophilicity (N(T)) and a moderate sensitivity (m) to changes in solvent ionizing power (Y(Cl)). The values are consistent with a rate-determining association within an association-dissociation pathway. The selectivity values (S) for the attack at the acyl carbon show a modest preference for ethanol over water and a relatively high preference for ethanol over 2,2,2-trifluoroethanol (TFE). The solvolyses of benzyl chloroformate show similar characteristics in solvents of relatively high nucleophilicity and/or low ionizing power. In solvents with considerable fluoro alcohol content, an ionization mechanism, accompanied by loss of carbon dioxide, leads to benzyl chloride, benzyl alcohol, and benzyl alkyl ether. A new correlation now applies, with a much lower l value and somewhat higher m value. The S values for this pathway are close to unity, even in TFE-ethanol mixtures, consistent with the components of the binary solvent capturing a highly reactive carbocation.