Zn modification of the reactivity of Pd(111) toward methanol and formaldehyde

The adsorption and reaction of methanol and formaldehyde on two-dimensional PdZn alloys on a Pd(111) surface were studied as a function of the Zn content in the alloy in order to understand the role of Zn in Pd/ZnO catalysts for the steam reforming of methanol (SRM). Temperature programmed desorption (TPD) and high resolution electron energy loss spectroscopy (HREELS) data show that Zn atoms incorporated into the Pd(111) surface dramatically decrease the dehydrogenation activity and alter the preferred bonding sites for adsorbed CO, CH3O, and CH2O intermediates. The experimental results obtained in this study are consistent with previous theoretical studies of this system and provide new insight into how Zn alters the reactivity of Pd.     

CH3O decomposition on PdZn(111), Pd(111), and Cu(111). A theoretical study

Methanol steam re-forming, catalyzed by Pd/ZnO, is a potential hydrogen source for fuel cells, in particular in pollution-free vehicles. To contribute to the understanding of pertinent reaction mechanisms, density functional slab model studies on two competing decomposition pathways of adsorbed methoxide (CH(3)O) have been carried out, namely, dehydrogenation to formaldehyde and C-O bond breaking to methyl. For the (111) surfaces of Pd, Cu, and 1:1 Pd-Zn alloy, adsorption complexes of various reactants, intermediates, transition states, and products relevant for the decomposition processes were computationally characterized. On the surface of Pd-Zn alloy, H and all studied C-bound species were found to prefer sites with a majority of Pd atoms, whereas O-bound congeners tend to be located on sites with a majority of Zn atoms. Compared to Pd(111), the adsorption energy of O-bound species was calculated to be larger on PdZn(111), whereas C-bound moieties were less strongly adsorbed. C-H scission of CH(3)O on various substrates under study was demonstrated to proceed easier than C-O bond breaking. The energy barrier for the dehydrogenation of CH(3)O on PdZn(111) (113 kJ mol(-)(1)) and Cu(111) (112 kJ mol(-)(1)) is about 4 times as high as that on Pd(111), due to the fact that CH(3)O interacts more weakly with Pd than with PdZn and Cu surfaces. Calculated results showed that the decomposition of methoxide to formaldehyde is thermodynamically favored on Pd(111), but it is an endothermic process on PdZn(111) and Cu(111) surfaces.     

Zinc coverage dependent structure of PdZn surface alloy

Catalytic performances of alloy and surface alloy are sensitive to the surface structures and composition. In this paper we present an overall survey of the surface structure of Pd(111) covered with different amount of Zn using Monte Carlo simulations. We demonstrate that the composition of PdZn surface alloy is Zn coverage dependent: the surface concentration of Zn increases with the increase of the deposited Zn. At one or multi-layer of zinc deposited Pd(111), a multilayer 1?:?1 PdZn surface alloy will be formed. Surface alloy islands dominated by palladium are formed at submonolayer Zn coverage. At very low zinc coverage, small palladium ensembles of 3 to 5 Pd atoms exist preferentially on the Pd(111) surface. Our simulated results which are consistent with the pertinent experiments indicate that the unusual high-temperature desorption peak of formaldehyde observed experimentally has likely originated from the small surface ensembles induced by deposited Zn.     

Comparative theoretical study of formaldehyde decomposition on PdZn, Cu, and Pd surfaces

Methanol steam reforming, catalyzed by Pd/ZnO (PdZn alloy), is a potential source of hydrogen for on-board fuel cells. CO has been reported to be a minor side product of methanol decomposition that occurs in parallel to methanol steam reforming on PdZn catalysts. However, fuel cells currently used in vehicles are very sensitive to CO poisoning. To contribute to the understanding of pertinent reaction mechanisms, we employed density functional slab model calculations to study the decomposition of formaldehyde, a key intermediate in methanol decomposition and steam reforming reactions, on planar surfaces of Pd, Cu, and PdZn as well as on a stepped surface of PdZn. The calculated activation energies indicate that dehydrogenation of formaldehyde is favorable on Pd(111), but unfavorable on Cu(111) and PdZn(111). On the stepped PdZn(221) surface, the dehydrogenation process was calculated to be more competitive to formaldehyde desorption than on PdZn(111). Thus, we ascribe the experimentally observed small amount of CO, formed during steam reforming of methanol on the Pd/ZnO catalyst, to occur at metallic Pd species of the catalyst or at defect sites of PdZn alloy.     

Effect of steps on the decomposition of CH3O at PdZn alloy surfaces

The decomposition of methoxide (CH(3)O) on a PdZn alloy is considered to be the rate-limiting step of steam re-forming of methanol over a Pd/ZnO catalyst. Our previous density functional (DF) studies (Langmuir 2004, 20, 8068; Phys. Chem. Chem. Phys. 2004, 6, 4499) revealed only a very low propensity of defect-free flat (111) and (100) PdZn surfaces to promote C-H or C-O bond breaking of CH(3)O. Thus, we applied the same DF periodic slab-model approach to investigate these two routes of CH(3)O decomposition on PdZn(221) surfaces that expose Pd, (221)(Pd), and Zn, (221)(Zn), steps. C-H bond cleavage of CH(3)O is greatly facilitated on (221)(Pd): the calculated activation energy is dramatically reduced, to approximately 50 kJ mol(-1) from approximately 90 kJ mol(-1) on flat PdZn surfaces, increasing the rate constant by a factor of 10(8). The lower barrier is mainly due to a weaker interaction of the reactant CH(3)O and an enhanced interaction of the product CH(2)O with the substrate. The activation energy for C-O bond scission did not decrease on the (221)(Pd) step. On the (221)(Zn) step, the calculated reaction barriers of both decomposition routes are even higher than on flat surfaces, because of the stronger adsorption of CH(3)O. Steps (and other defects) appear to be crucial for methanol steam re-forming on Pd/ZnO catalyst; the stepped surface PdZn(221)(Pd) is a realistic model for studying the reactivity of this catalyst.     

In situ studies of methanol decomposition and oxidation on Pd(111) by PM-IRAS and XPS spectroscopy

Methanol decomposition and oxidation on Pd(111) at millibar pressure were studied by in situ polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS), on-line gas chromatography and pre- and postreaction X-ray photoelectron spectroscopy (XPS). Various dehydrogenation products such as methoxy CH3O, formaldehyde CH2O, formyl CHO, and CO could be spectroscopically identified. Methanol oxidation proceeds via dehydrogenation to formaldehyde CH2O, which either desorbs or is further dehydrogenated to CO, which is subsequently oxidized to CO2. Carbonaceous overlayers that are present during the reaction may favorably affect the selectivity toward CH2O. The reaction takes place on metallic Pd, and no indications of an involvement of Pd surface oxide were observed.     

Microscopic models of PdZn alloy catalysts: structure and reactivity in methanol decomposition

We review systematic experimental and theoretical efforts that explored formation, structure and reactivity of PdZn catalysts for methanol steam reforming, a material recently proposed to be superior to the industrially used Cu based catalysts. Experimentally, ordered surface alloys with a Pd : Zn ratio of approximately 1 : 1 were prepared by deposition of thin Zn layers on a Pd(111) surface and characterized by photoelectron spectroscopy and low-energy electron diffraction. The valence band spectrum of the PdZn alloy resembles closely the spectrum of Cu(111), in good agreement with the calculated density of states for a PdZn alloy of 1 : 1 stoichiometry. Among the issues studied with the help of density functional calculations are surface structure and stability of PdZn alloys and effects of Zn segregation in them, and the nature of the most likely water-related surface species present under the conditions of methanol steam reforming. Furthermore, a series of elementary reactions starting with the decomposition of methoxide, CH(3)O, along both C-H and C-O bond scission channels, on various surfaces of the 1 : 1 PdZn alloy [planar (111), (100) and stepped (221)] were quantified in detail thermodynamically and kinetically in comparison with the corresponding reactions on the surfaces Pd(111) and Cu(111). The overall surface reactivity of PdZn alloy was found to be similar to that of metallic Cu. Reactive methanol adsorption was also investigated by in situ X-ray photoelectron spectroscopy for pressures between 3 x 10(-8) and 0.3 mbar.     

Controlling ZnO morphology for improved methanol steam reforming reactivity

The selectivity towards CO2 during steam reforming of methanol on Pd increases in the order Al2O3 < ZrO2 < ZnO. However, conventional catalyst preparation can damage the ZnO surface, even causing complete dissolution. The faceted, prismatic ZnO crystals in the support (Aldrich) get easily destroyed during catalyst preparation. We show in this work that, by using organic precursors, the faceted ZnO particles can be preserved. The role of ZnO morphology on reactivity for methanol steam reforming (MSR) is explored. Since the MSR reactivity and selectivity is also a function of the particle size of the nanoparticles as well as the presence of the PdZn ordered alloy phase, we have controlled for both these parameters to derive the true influence of the support. We find that the catalyst prepared from an organic precursor is more active than one prepared from acidic precursors, despite having similar particle size and extent of bulk PdZn ordered alloy formation. The results suggest that preserving certain ZnO surfaces is beneficial, and the ZnO support may play an important role in the overall reaction of methanol steam reforming.     

Zn adsorption on Pd(111): ZnO and PdZn alloy formation

The adsorption and thermal desorption of Zn and ZnO on Pd(111) was studied in the temperature range between 300 and 1300 K with TDS, LEED, and CO adsorption measurements. At temperatures below 400 K, multilayer growth of Zn metal on the Pd(111) surface takes place. At a coverage of 0.75 ML of Zn, a p(2 x 2)-3Zn LEED structure is observed. Increasing the coverage to 3 ML results in a (1 x 1) LEED pattern arising from an ordered Zn multilayer on Pd(111). Thermal desorption of the Zn multilayer state leads to two distinct Zn desorption peaks: a low-temperature desorption peak (400-650 K) arising from upper Zn layers and a second peak (800-1300 K) originating from the residual 1 ML Zn overlayer, which is more strongly bound to the Pd(111) surface and blocks CO adsorption completely. Above 650 K, this Zn adlayer diffuses into the subsurface region and the surface is depleted in Zn, as can be deduced from an increased amount of CO adsorption sites. Deposition of >3 ML of Zn at 750 K leads to the formation of a well-ordered Pd-Zn alloy exhibiting a (6 x 4 square root 3/3)rect. LEED structure. CO adsorption measurements on this surface alloy indicate a high Pd surface concentration and a strong reduction of the CO adsorption energy. Deposition of Zn at T > 373 K in 10(-6) mbar of O2 leads to the formation of an epitaxial (6 x 6) ZnO overlayer on Pd(111). Dissociative desorption of ZnO from this overlayer occurs quantitatively both with respect to Zn and O2 above 750 K, providing a reliable calibration for both ZnO, Zn, and oxygen coverage.     

Pathways for methanol steam reforming involving adsorbed formaldehyde and hydroxyl intermediates on Cu(111): density functional theory studies

Plane-wave density functional theory calculations have been carried out to explore possible pathways in methanol steam reforming (MSR) on Cu(111). We focus on reactions involving the adsorbed formaldehyde intermediate (CH(2)O) produced by methanol decomposition and the surface hydroxyl (OH) species generated by dissociative adsorption of H(2)O. Several possible pathways leading to the H(2) + CO(2) products have been identified. The two most likely pathways involve the formate (CHOO), rather than the carboxyl (COOH), intermediate, and they possess barriers lower than that of the rate-limiting step of MSR, namely the dehydrogenation of adsorbed methoxyl (CH(3)O) species.     

Study of the Influence Exerted by Zinc Additive on the Structure and Catalytic Properties of Pd/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Liquid-Phase Hydrogenation of Acetylene

Effect of the phase composition of aluminum oxide [γ- and (δ + θ) phase] and introduction of zinc additives on the catalytic properties of 0.5% Pd/Al₂O₃ systems in the reaction of liquid-phase hydrogenation of acetylene into ethylene under an elevated pressure in a flow-through mode was studied. An increase in the activity of the Pd catalyst upon modification with zinc is only observed in the case of a system supported by the mixed phase of (δ + θ) aluminum oxide. XAFS spectroscopy was used to find that the increase in the activity and selectivity with respect to ethylene (in the presence of carbon monoxide) on the (0.5% Pd–0.62% Zn)/(δ + θ)-Al2O3 catalyst is correlated with the formation of the PdZn intermetallic compound.     

甲醇与氧在银钯合金上的吸附和反应

本文运用UPS、超高真空程序升温反应谱(TPRS)研究了氧和甲醇在银钯合金上的吸附和反应。实验结果表明, 合金表面存在两种分别与Ag和Pd原子有关的活性位; 少量钯原子的存在, 一方面提供了甲醇分解反应的活性中心, 另一方面通过与银之间的电子相互作用, 削弱了氧与银的结合, 增强了表面吸附氧的反应活性, 从而改变了甲醇氧化反应的选择性。     

Preparation and characterization of silica supported Au-Pd model catalysts

Au-Pd bimetallic model catalysts were synthesized as alloy clusters on SiO2 ultrathin films under ultrahigh vacuum (UHV) conditions. The surface composition and morphology were characterized with low energy ion scattering spectroscopy (LEIS), infrared reflection absorption spectroscopy (IRAS), and temperature programmed desorption (TPD). Relative to the bulk, the surface of the clusters is enriched in Au. With CO as a probe, IRAS and TPD were used to identify isolated Pd sites at the surface of the supported Au-Pd clusters. Ethylene adsorption and dehydrogenation show a clear structure-reactivity correlation with respect to the structure/composition of these Au-Pd model catalysts.     

利用第一性原理研究氧化铟在甲醇水蒸气重整反应中的催化作用

基于第一性原理方法,证明了甲醛在In₂O₃(110)表面可以选择性地转化为CO₂. 水分解得到的OH物种有利于甲醛脱氢得到CHO,后者不易直接脱氢,其H原子被周围的OH捕获生成CO和H₂O. 最后,相比较其从表面直接脱附,CO更容易获得一个晶格氧生成CO₂. 计算结果表明,在没有PdIn合金参与催化的甲醇水蒸气重整反应过程中,In₂O₃确实扮演着非常重要的角色,进而从理论上证实了甲醇在氧化铟表面选择性生成CO₂的实验结果.     

Density functional theory study of the adsorption of formaldehyde on Pd4 and on Pd4/gamma-Al2O3 clusters

B3LYP/LANL2DZ and B3LYP/6-31G(d)-restricted and -unrestricted calculations are employed to calculate energies and adsorption forms of formaldehyde adsorbed on planar and on tetrahedral Pd4 clusters and on a Pd4 cluster supported on Al10O15. Formaldehyde adsorbs on planar Pd4 in the eta(2)(C,O)-di-sigma adsorption mode, while on tetrahedral Pd4, it adsorbs in the eta(2)(C,O)-pi adsorption mode. The adsorption energy on planar Pd4 is -21.4 kcal x mol(-1), whereas for the tetrahedral Pd4 cluster, the adsorption energy is -13.2 kcal x mol(-1). The latter value is close to experimental findings (-12 to -14 kcal x mol(-1)). Adsorption of formaldehyde on Pd4 supported on an Al10O15 cluster leads essentially to the same result as that found for adsorption on the tetrahedral Pd4 cluster. Charge density analysis for the interaction between formaldehyde and the Pd4 clusters indicates strong backdonation in the eta(2) adsorption mode, leading to positive charge on the Pd4 cluster. NBO analysis shows that the highly coordinated octahedral aluminum atoms of Al10O15 donate electron density to the supported Pd4 cluster, while tetrahedral aluminum atoms with lower coordination number have acidic nature and therefore act as electron acceptors.     

Zn对Pt-Sn/γ-Al2O3催化剂中Sn的活性状态及丙烷脱氢反应的影响

将少量Zn添加到催化剂Pt-Sn/γ-Al2O3中, 可显著提高催化剂的丙烷脱氢稳定性和丙烯的选择性. 程序升温还原(H2-TPR)和程序升温电导(TPEC)测试结果表明, Zn的存在使Sn在强还原气氛中不易被还原, Sn的氧化态的稳定存在是Sn发挥助剂作用和保持催化剂稳定性的重要条件.     

Catalytic Conversion of Methanol by Oxidative Dehydrogenation

This study investigates the effects of addition of oxygen on the oxidative dehydrogenation (ODH) of methanol when a fluorotetrasilicic mica ion-exchanged with palladium (Pd2 -TSM) was used as the catalyst. The reaction proceeded at a very low temperature in the presence of oxygen, and HCOOCH3 was obtained at high selectivity. By calculating the equilibrium conversion, it has been shown that substantial ODH took place for HCOOCH3 production. Consequently, this reaction would make dehydrogenation the dominant reaction at equilibrium. Not all the H dissociated from CH3OH was converted to H2O by oxidation. It has been shown that the H2O was not produced from oxidative dehydrogenation by the direct reaction of CH3OH and O2 when an attempt was made to carry out oxidative dehydrogenation using an isotope oxygen trace method in the gas phase. Therefore, when CH3OH was converted to CO2 and dehydrogenated to HCOOCH3, the C—O bonds were not dissociated.     

The rich chemistry of [Zn2Cp*2]: trapping three different types of zinc ligands in the PdZn7 complex [Pd(ZnCp*)4(ZnMe)2{Zn(tmeda)}

The synthesis, structural characterization, and bonding situation analysis of a novel, all-zinc, hepta-coordinated palladium complex [Pd(ZnCp*)(4)(ZnMe)(2){Zn(tmeda)}] (1) is reported. The reaction of the substitution labile d(10) metal starting complex [Pd(CH(3))(2)(tmeda)] (tmeda = N,N,N',N'-tetramethyl-ethane-1,2-diamine) with stoichiometric amounts of [Zn(2)Cp*(2)] (Cp* = pentamethylcyclopentadienyl) results in the formation of [Pd(ZnCp*)(4)(ZnMe)(2){Zn(tmeda)}] (1) in 35% yield. Compound 1 has been fully characterized by single-crystal X-ray diffraction, (1)H and (13)C NMR spectroscopy, IR spectroscopy, and liquid injection field desorption ionization mass spectrometry. It consists of an unusual [PdZn(7)] metal core and exhibits a terminal {Zn(tmeda)} unit. The bonding situation of 1 with respect to the properties of the three different types of Zn ligands Zn(R,L) (R = CH(3), Cp*; L = tmeda) bonded to the Pd center was studied by density functional theory quantum chemical calculations. The results of energy decomposition and atoms in molecules analysis clearly point out significant differences according to R vs L. While Zn(CH(3)) and ZnCp* can be viewed as 1e donor Zn(I) ligands, {Zn(tmeda)} is best described as a strong 2e Zn(0) donor ligand. Thus, the 18 valence electron complex 1 nicely fits to the family of metal-rich molecules of the general formula [M(ZnR)(a)(GaR)(b)] (a + 2b = n ≥ 8; M = Mo, Ru, Rh; Ni, Pd, Pt; R = Me, Et, Cp*).     

DFT法研究HCOOH在Pd/WC(0001)上的分解机理（英文）

作为便携式电子设备的动力源,直接甲酸燃料电池(DFAFC)具有燃料跨界范围小、电动势大、甲酸无毒、低温下功率密度大等优点,因而引起了人们的极大兴趣.DFAFC商业化的主要挑战之一是阳极电催化剂材料的高成本和低CO耐受性.阳极通常需要高负载的贵金属电催化剂(Pt或Pd)氧化甲酸(HCOOH)以获得所需的电能.完全电氧化甲酸在Pt和Pd表面上会产生强吸附的CO,从而降低了Pt或Pd催化剂的活性.Pt和Pd储量少且价格昂贵,减少Pt和Pd含量且保持催化性能的燃料电池催化剂一直是研究者的奋斗目标.本文用周期性密度泛函理论(DFT)系统地研究了WC负载的单分子层Pd(Pd/WC(0001))催化剂对甲酸的分解机理,这可为所需的反应路径设计、筛选催化剂提供指导.Trans-HCOOH通过C-H,O-H,C-O键的活化发生分解.关于吸附,确定了可能反应中间体的最稳定吸附构型.trans-HCOOH,HCOO,mHCOO,cis-COOH,trans-COOH,CO,H2O,OH和H的吸附过程是化学吸附,而cis-HCOOH和CO2与Pd/WC(0001)表面的相互作用较弱,是物理吸附.此外,提出了trans-HCOOH分解的不同途径来探索分解机理.trans-HCOOH中O-H,C-H和C-O键的活化能垒分别为0.61,0.77和1.05 eV,O-H键断裂的能垒最小,则trans-HCOOH优先通过O-H键断裂生成HCOO.双齿HCOO是HCOOH分解的主要中间体,它可以转变为单齿HCOO,这条路线生成CO2的能垒比双齿HCOO的低0.04 eV.CO2是HCOO主要解离产物,这一步是总反应的决速步骤.对于cis-COOH和trans-COOH,CO是其主要解离产物.此外,trans-HCOOH也能直接生成CO,但克服的能垒较大.在Pd/WC(0001)表面上分解trans-HCOOH的最有利途径是HCOOH→HCOO→CO2,其中HCOO脱氢形成CO2的步骤是速率决定步骤.本文提供了HCOOH在Pd/WC(0001)表面上分解的活性中间体、能垒和机理的推测,CO形成主要是通过cis-COOH、trans-COOH及HCO的分解,CO2的形成主要是通过HCOO的分解,CO2占主导.该结论与Pd(111)面上甲酸分解结果一致,说明WC作为Pd载体没有改变Pd对甲酸的催化性能,但降低了Pd的使用量.综上,本文阐明了WC负载单分子层Pd催化剂上甲酸催化分解机理,得出甲酸分解的最佳反应路径,为直接甲酸燃料电池设计低贵金属含量、高活性的负载型Pd催化剂提供了理论指导;可用于预测不同载体负载Pd催化剂的性能,大大减少实验成本,以验证提出的实验假设.