The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Effects of slip on steady Bödewadt flow and heat transfer of an electrically conducting non-Newtonian fluid

The steady flow and heat transfer arising due to the rotation of a non-Newtonian fluid at a larger distance from a stationary disk is extended to the case where the disk surface admits partial slip. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The momentum equation gives rise to a highly nonlinear boundary value problem. Numerical solution of the governing nonlinear equations are obtained over the entire range of the physical parameters. The effects of slip, non-Newtonian fluid characteristics and the magnetic interaction parameter on the momentum boundary layer and thermal boundary layer are discussed in detail and shown graphically. It is observed that slip has prominent effects on the velocity and temperature fields.     

Effects of slip on steady Bödewadt flow of a non-Newtonian fluid

The steady flow arising due to the rotation of a non-Newtonian fluid at a larger distance from a stationary disk is extended to the case where the disk surface admits partial slip. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The momentum equation gives rise to a highly nonlinear boundary value problem. Numerical solution of the governing nonlinear equations are obtained over the entire range of the physical parameters. The effects of slip and non-Newtonian fluid characteristics on the momentum boundary layer are discussed in details. It is observed that slip has prominent effect on the velocity field, whereas a predominant influence of the non-Newtonian parameter is observed on the moment coefficient.     

Hydromagnetic rotating flow of a fourth‐order fluid past a porous plate

The rotating flow in the presence of a magnetic field is a problem belonging to hydromagnetics and deserves to be more widely studied than it has been to date. In the non‐linear regime the literature is scarce. We develop the governing equations for the unsteady hydromagnetic rotating flow of a fourth‐order fluid past a porous plate. The steady flow is governed by a boundary value problem in which the order of differential equations is more than the number of available boundary conditions. It is shown that by augmenting the boundary conditions based on asymptotic structures at infinity it is possible to obtain numerical solutions of the nonlinear hydromagnetic equations. Effects of uniform suction or blowing past the porous plate, exerted magnetic field and rotation on the flow phenomena, especially on the boundary layer structure near the plate, are numerically analysed and discussed. The flow behaviours of the Newtonian fluid and second‐, third‐ and fourth‐order non‐Newtonian fluids are compared for the special flow problem, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

Nonsimilar solutions for double-diffusion boundary layers on a sphere in micropolar fluids with constant wall heat and mass fluxes

This work presents nonsimilar boundary layer solutions for double-diffusion natural convection near a sphere with constant wall heat and mass fluxes in a micropolar fluid. A coordinate transformation is employed to transform the governing equations into nondimensional nonsimilar boundary layer equations and the obtained boundary layer equations are then solved by the cubic spline collocation method. Results for the local Nusselt number and the local Sherwood number are presented as functions of the vortex viscosity parameter, Schmidt number, buoyancy ratio, and Prandtl number. Higher vortex viscosity tends to retard the flow, and thus decreases the local convection heat and mass transfer coefficients, raising the wall temperature and concentration. Moreover, the local convection heat and mass transfer coefficients near a sphere in Newtonian fluids are higher than those in micropolar fluids.     

流过半无限竖直可渗透壁面时的磁流体动力学自由对流

研究不可压缩粘性导电流体,流过半无限竖直可渗透平板时,将其偏微分形式的流动和传热的基本控制方程,应用适当的相似变换,简化为非线性的常微分方程组．对两种抽吸参数:大的和小的抽吸参数,采用摄动法得到变换后方程的近似解．数值结果表明,随着磁场参数和抽吸参数的增大,任意点的速度场在减小;磁场参数的影响,引起热边界层厚度的增大;速度和温度场随着热汇参数的增大而减小．     

Effects of partial slip,viscous dissipation and Joule heating on Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid

The steady Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid is extended to the case where the disk surface admits partial slip. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The momentum equations give rise to highly non-linear boundary value problem. Numerical solutions for the governing non-linear equations are obtained over the entire range of the physical parameters. The effects of slip, magnetic parameter and non-Newtonian fluid characteristics on the velocity and temperature fields are discussed in detail and shown graphically. Emphasis has been laid to study the effects of viscous dissipation and Joule heating on the thermal boundary layer. It is interesting to find that the non-Newtonian cross-viscous parameter has an opposite effect to that of the slip and the magnetic parameter on the velocity and the temperature fields.     

New explicit approximate solution of MHD viscoelastic boundary layer flow over stretching sheet

In this paper, the study the momentum and heat transfer characteristics in an incompressible electrically conducting non‐Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly nonlinear coupled ordinary differential equations by similarity transformations. The resultant coupled highly nonlinear ordinary differential equations are solved by means of, homotopy analysis method (HAM) for constructing an approximate solution of heat transfer in magnetohydrodynamic (MHD) viscoelastic boundary layer flow over a stretching sheet with non‐uniform heat source. The proposed method is a strong and easy to use analytic tool for nonlinear problems and does not need small parameters in the equations. The HAM solutions contain an auxiry parameter, which provides a convenient way of controlling the convergence region of series solutions. The results obtained here reveal that the proposed method is very effective and simple for solving nonlinear evolution equations. The method is straightforward and concise, and it can also be applied to other nonlinear evolution equations in physics. Copyright © 2012 John Wiley & Sons, Ltd.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with thermal radiation and non-uniform heat source/sink

An analysis has been carried out to study the flow and heat transfer characteristics for MHD viscoelastic boundary layer flow over an impermeable stretching sheet with space and temperature dependent internal heat generation/absorption (non-uniform heat source/sink), viscous dissipation, thermal radiation and magnetic field due to frictional heating. The flow is generated due to linear stretching of the sheet and influenced by uniform magnetic field, which is applied vertically in the flow region. The governing partial differential equations for the flow and heat transfer are transformed into ordinary differential equations by a suitable similarity transformation. The governing equations with the appropriate conditions are solved exactly. The effects of viscoelastic parameter and magnetic parameter on skin friction and the effects of viscous dissipation, non-uniform heat source/sink and the thermal radiation on heat transfer characteristics for two general cases namely, the prescribed surface temperature (PST) case and the prescribed wall heat flux (PHF) case are presented graphically and discussed. The numerical results for the wall temperature gradient (the Nusselt number) are presented in tables and are discussed.     

Lie group analysis for the effect of temperature-dependent fluid viscosity with thermophoresis and chemical reaction on MHD free convective heat and mass transfer over a porous stretching surface in the presence of heat source/sink

This paper concerns with a steady two-dimensional flow of an electrically conducting incompressible fluid over a vertical stretching sheet. The flow is permeated by a uniform transverse magnetic field. The fluid viscosity is assumed to vary as a linear function of temperature. A scaling group of transformations is applied to the governing equations. The system remains invariant due to some relations among the parameters of the transformations. After finding three absolute invariants a third-order ordinary differential equation corresponding to the momentum equation and two second-order ordinary differential equation corresponding to energy and diffusion equations are derived. The equations along with the boundary conditions are solved numerically. It is found that the decrease in the temperature-dependent fluid viscosity makes the velocity to decrease with the increasing distance of the stretching sheet. At a particular point of the sheet the fluid velocity decreases with the decreasing viscosity but the temperature increases in this case. It is found that with the increase of magnetic field intensity the fluid velocity decreases but the temperature increases at a particular point of the heated stretching surface. Impact of thermophoresis particle deposition with chemical reaction in the presence of heat source/sink plays an important role on the concentration boundary layer. The results thus obtained are presented graphically and discussed.     

Unsteady MHD Couette flow in a rotating system

The unsteady hydromagnetic Couette flow of a viscous incompressible electrically conducting fluid in a rotating system has been considered. An exact solution of the governing equations has been obtained by using a Laplace transform. Solutions for the velocity distributions as well as shear stresses have been obtained for small times as well as for large times. It is found that for large times the primary velocity decreases with increase in the rotation parameter K² while it increases with increase in the magnetic parameter M². It is also found that with increase in K², the secondary velocity v₁ decreases near the stationary plate while it increases near the moving plate. On the other hand, the secondary velocity decreases with increase in the magnetic parameter.     

等宽多孔介质壁面管道中磁流体的流动

研究等宽管道中,磁场、可渗透壁面、Darcy速度和滑动参数,对流体稳定流动的综合影响.假设管道中流动的流体是均匀的、不可压缩的Newton流体.利用Beavers-Joseph滑动边界条件,得到控制方程的解析解.详细地讨论了磁场、可渗透性、Darcy速度和滑动参数对轴向速度、滑动速度和剪应力的影响.可以看出,Hartmann数、Darcy速度、多孔参数和滑动参数,在改变流动方向,进而改变剪应力方面,起着至关重要的作用.     

Nonsimilar boundary layer analysis of double-diffusive convection from a vertical truncated cone in a porous medium with variable viscosity

This work presents a boundary layer analysis about variable viscosity effects on the double-diffusive convection near a vertical truncated cone in a fluid-saturated porous medium with constant wall temperature and concentration. The viscosity of the fluid is assumed to be an inverse linear function of the temperature. A boundary layer analysis is employed to derive the nondimensional nonsimilar governing equations, and the transformed boundary layer governing equations are solved by the cubic spline collocation method to yield computationally efficient numerical solutions. The obtained results are found to be in good agreement with previous papers on special cases of the problem. Results for local Nusselt and Sherwood numbers are presented as functions of viscosity-variation parameter, buoyancy ratio, and Lewis number. For a porous medium saturated with a Newtonian fluid with viscosity proportional to an inverse linear function of temperature, higher value of viscosity-variation parameter leads to the decrease of the viscosity in fluid flow, thus increasing the fluid velocity as well as the local Nusselt number and the local Sherwood number.     

Hydrodynamic and thermal slip flow boundary layers over a flat plate with constant heat flux boundary condition

In this paper the boundary layer flow over a flat plat with slip flow and constant heat flux surface condition is studied. Because the plate surface temperature varies along the x direction, the momentum and energy equations are coupled due to the presence of the temperature gradient along the plate surface. This coupling, which is due to the presence of the thermal jump term in Maxwell slip condition, renders the momentum and energy equations non-similar. As a preliminary study, this paper ignores this coupling due to thermal jump condition so that the self-similar nature of the equations is preserved. Even this fundamental problem for the case of a constant heat flux boundary condition has remained unexplored in the literature. It was therefore chosen for study in this paper. For the hydrodynamic boundary layer, velocity and shear stress distributions are presented for a range of values of the parameter characterizing the slip flow. This slip parameter is a function of the local Reynolds number, the local Knudsen number, and the tangential momentum accommodation coefficient representing the fraction of the molecules reflected diffusively at the surface. As the slip parameter increases, the slip velocity increases and the wall shear stress decreases. These results confirm the conclusions reached in other recent studies. The energy equation is solved to determine the temperature distribution in the thermal boundary layer for a range of values for both the slip parameter as well as the fluid Prandtl number. The increase in Prandtl number and/or the slip parameter reduces the dimensionless surface temperature. The actual surface temperature at any location of x is a function of the local Knudsen number, the local Reynolds number, the momentum accommodation coefficient, Prandtl number, other flow properties, and the applied heat flux.     

Soret and Dufour effects on MHD slip flow with thermal radiation over a porous rotating infinite disk

In this investigation, thermal radiation effect over an electrically conducting, Newtonian fluid in a steady laminar magnetohydrodynamic convective flow over a porous rotating infinite disk with the consideration of heat and mass transfer in the presence of Soret and Dufour diffusion effects is investigated. The partial differential equations governing the problem under consideration are transformed by a similarity transformation into a system of ordinary differential equations which are solved numerically using fourth order Runge–Kutta based shooting method. The effects of the magnetic interaction parameter, slip flow parameter, Soret number, Dufour number, Schmidt number, radiation parameter, Prandtl number and suction parameter on the fluid velocity, temperature and concentration distributions in the regime are depicted graphically and are analyzed in detail. The corresponding skin-friction coefficients, the Nusselt number and the Sherwood number are also calculated and displayed in tables showing the effects of various parameters on them.     

Numerical simulation of flow of a micropolar fluid between a porous disk and a non-porous disk

Two dimensional steady, laminar and incompressible motion of a micropolar fluid between an impermeable disk and a permeable disk is considered to investigate the influence of the Reynolds number and the micropolar structure on the flow characteristics. The main flow stream is superimposed by constant injection velocity at the porous disk. An extension of Von Karman’s similarity transformations is applied to reduce governing partial differential equations (PDEs) to a set of non-linear coupled ordinary differential equations (ODEs) in dimensionless form. An algorithm based on finite difference method is employed to solve these ODEs and Richardson’s extrapolation is used to obtain higher order accuracy. The numerical results reflect the expected physical behavior of the flow phenomenon under consideration. The study indicates that the magnitude of shear stress increases strictly and indefinitely at the impermeable disk while it decreases steadily at the permeable disk, by increasing the injection velocity. Moreover, the micropolar fluids reduce the skin friction as compared to the Newtonian fluids. The magnitude of microrotation increases with increasing the magnitude of R and the micropolar parameters. The present results are in excellent comparison with the available literature results.     

Magnetic field effects on Newtonian and non-Newtonian ferrofluid flow past a circular cylinder

The changes in the flow properties under the action of electromagnetic body forces are investigated numerically for ferrofluid flow past a circular cylinder. Ferrofluid is modeled as both a Newtonian and a non-Newtonian Power-Law fluid. Magnetic forces are applied by placing magnets at different locations on the surface of the cylinder. The magnetostatic effects on the structure of the wake region, on drag reduction and on vortex formation length and frequency are shown and compared in terms of Reynolds number, interaction parameter, Power-Law index and magnet location. It is shown that the increase in the interaction parameter reduces drag for both Newtonian and non-Newtonian model. This decrease is observed to be higher for shear thinning and lower for shear thickening fluid compared to Newtonian case. It is also shown that vortex street formation in the wake region behind the cylinder may be delayed under high magnetic effects. The Strouhal number is higher for shear thinning case at both low and high Reynolds numbers, and lower for shear thickening case at high Reynolds numbers, compared to Newtonian fluid. The vortex formation frequency also decreases under the action of the magnetic field in all cases, however the vortex formation length increases. Placing the magnet towards the front region of the cylinder increases considerably the drag coefficient for both Newtonian and non-Newtonian model. This increase in drag coefficient is higher in the shear thinning fluid and lower in the shear thickening fluid compared to the Newtonian case.     

微极液体在两个多孔圆盘间的MHD流动及其热传导

两个平行的无限大多孔圆盘,圆盘表面有均匀注入时,数值地研究圆盘间不可压缩导电微极流体,在横向外加磁场作用下的轴对称稳定层流.运用von Krmn的相似变换,将非线性运动的控制方程转化为无量纲形式.使用基于有限差分格式的算法,在相应的边界条件下,求解简化后耦合的常微分方程组.讨论Reynolds数、磁场参数、微极参数和Prandtl数,对流动速度和温度分布的影响.在特殊情况下,所得结果与已有文献的工作有着很好的一致性.研究表明,圆盘表面的传热率随着Rynolds数、磁场参数和Prandtl数的增加而增加;剪切应力随着注入的增加而减少,但它随着外部磁场的加强而增加.和Newton流体相比较,微极流体的剪切应力因素较弱,有利于聚合体加工过程中流动和温度的控制.     

Magnetohydrodynamic non-Darcy mixed convection heat transfer from a vertical heated plate embedded in a porous medium with variable porosity

A numerical model is developed to study magnetohydrodynamics (MHD) mixed convection from a heated vertical plate embedded in a Newtonian fluid saturated sparsely packed porous medium by considering the variation of permeability, porosity and thermal conductivity. The boundary layer flow in the porous medium is governed by Forchheimer–Brinkman extended Darcy model. The conservation equations that govern the problem are reduced to a system of non-linear ordinary differential equations by using similarity transformations. Because of non-linearity, the governing equations are solved numerically. The effects of magnetic field on velocity and temperature distributions are studied in detail by considering uniform permeability (UP) and variable permeability (VP) of the porous medium and the results are discussed graphically. Besides, skin friction and Nusselt number are also computed for various physical parameters governing the problem under consideration. It is found that the inertial parameter has a significant influence in increasing the flow field and the rate of heat transfer for variable permeability case. The important finding of the present work is that the magnetic field has considerable effects on the boundary layer velocity and on the rate of heat transfer for variable permeability of the porous medium. Further, the results obtained under the limiting conditions were found to be in good agreement with the existing ones.     

Finite amplitude long-wave instability of a thin viscoelastic fluid during spin coating

This paper investigates the stability of a thin incompressible viscoelastic fluid designated as Walters’ liquid B″ during spin coating. The long-wave perturbation method is proposed to derive a generalized kinematic model of the film flow. The method of normal mode is applied to study the linear stability. The amplitude growth rates and the threshold conditions are characterized subsequently and summarized as the by-products of the linear solutions. Using the multiple scales method, the weakly nonlinear stability analysis is studied for the evolution equation of a film flow. The Ginzburg–Landau equation is determined to discuss the threshold conditions of the various critical flow states. The study reveals that the rotation number and the radius of the rotating circular disk generate the destabilizing effects. Moreover, the viscoelastic parameter k indeed plays a more significant role in destabilizing the film flow than a thin Newtonian fluid during spin coating [27].