Copolymers of 2-hydroxyethyl methacrylate and alkyl acrylates: Studies of molecular weight distribution and thermal behavior

Several copolymers of 2-hydroxyethyl methacrylate (HEMA) with methyl acrylate (MA), ethyl acrylate (EA), n-butyl acrylate (BA), and methyl methacrylate (MMA) were prepared at 70°C in nitrogen atmosphere using 0.2% (w/v) benzoyl peroxide as initiator. The copolymer composition was evaluated by estimation of hydroxyl group in the copolymers. Intrinsic viscosity of HEMA–EA, HEMA–BA, and HEMA–MMA copolymers was determined at 35°C in dimethyl formamide. Molecular weight distribution of copolymer samples was evaluated by gel permeation chromatography. Thermal behavior of the copolymers was investigated by dynamic thermogravimetry. Thermal stability decreased on increasing HEMA content in MA, EA, and BA copolymers. However, a reverse trend was observed in HEMA–MMA copolymers.     

Synthesis and characterization of random copolymers of (2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate and 2,3-dihydroxypropyl methacrylate

Poly[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate)] [poly(solketal methacrylate) (PSMA)] was synthesized by free radical polymerization. By partial hydrolysis of the acetal group, random copolymers of SMA with 2,3-dihydroxypropyl methacrylate (DHPMA) were synthesized whereas complete cleavage lead to poly(2,3-dihydroxypropyl methacrylate) (PDHPMA). The copolymer composition was determined by ¹H NMR spectroscopy. FTIR spectroscopy indicates the synthesis of random copolymers with different degrees of hydrogen bonding as measured by a shift of the OH vibration bands. The glass transition temperature of the random copolymers increases linearly with increasing DHPMA content, resulting in a positive deviation from the Fox equation. The thermal degradation of both homopolymers and their random copolymers has been studied. Finally, the solution behaviour of the copolymers and PDHPMA in water studied by dynamic light scattering showed a strong tendency of the polymer chains to form clusters in the size range of 15-62 nm. The size and the kind of associating interactions within the clusters strongly depend on the copolymer composition.     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

Preparation and characterization of copolymers of chloroprene and methyl methacrylate

The preparation of chloroprene–methyl methacrylate copolymers in the presence of Lewis acids (Et_1.5AlCl_1.5) in hydrocarbon solvent and the effect of Lewis acids concentration on copolymer composition are described. ¹³C NMR spectra were obtained on these copolymers. In samples of high MMA content, tactic placements of MMA were observed as well as several different kinds of sequences for chloroprene and MMA. In samples of low MMA content, no tactic placements of MMA were found but several different kinds of chloroprene sequences were observed. From the analysis of the ¹³C NMR spectra of the different copolymers examined, it is apparent that all the various kinds of chloroprene sequences in these copolymers can be determined.     

Direct synthesis of amphiphilic block copolymers, consisting of poly(methyl methacrylate) and poly(sodium styrene sulfonate) blocks through atom transfer radical polymerization

Amphiphilic block copolymers of methyl methacrylate (MMA) and sodium styrene sulfonate (SSNa) were successfully synthesized via direct atom transfer radical polymerization (ATRP) of SSNa. First, poly(sodium styrene sulfonate) (PSSNa) or poly(methyl methacrylate) (PMMA) macroinitiators were prepared using proper ATRP systems for each case. In some cases, functional initiators, which allow further reactions, were used. The macroinitiators were characterized and further used to synthesize PSSNa/PMMA block copolymers, by using proper solvent combinations, such as N,N-dimethylformamide/water or methanol/water at appropriate volume ratios, in order to ensure solubility of the synthesized amphiphilic copolymers. The molecular weight of the copolymers was determined by gel permeation chromatography, using water as eluent. By using a combination of analytical techniques like ¹H NMR, FTIR and thermogravimetry, the chemical structure and the actual copolymer composition were determined. Since, the block copolymers were soluble in water, forming hydrophilic/hydrophobic domains in aqueous solution, their micellization behavior was further studied by pyrene fluorescence probing.     

Electrospinning of the hydrophilic poly (2-hydroxyethyl methacrylate) and its copolymers with 2-ethoxyethyl methacrylate

The goal was to electrospin 2-hydroxyethyl methacrylate — based biocompatible polymers and prepare submicron fibres (nanofibers) for biomedicinal applications. Syntheses of poly(2-hydroxyethyl methacrylate) (HEMA) and its copolymer with 2-ethoxyethyl methacrylate (EOEMA), and their characterization by viscometry and molecular weight are described. Their relation to electrospinning is discussed. Electrospinning of HEMA homopolymer from water-ethanol is successful for molecular weights 6.31 × 10⁵ and 1.80 × 10⁶ g/mol. Electrospinning of HEMA/EOEMA copolymers is feasible from ethanol.      

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

Poly(trialkylsilyl methacrylate)s: A family of hydrolysable polymers with tuneable erosion profiles

Polymers containing hydrolytically labile trialkylsilyl ester side groups were synthesised via a conventional and a controlled radical polymerization. The trialkylsilyl methacrylate monomer unit was chosen for its capacity to hydrolyse into basic, acid or sea water varying the hydrophilic character of the resulting polymer backbone with time. The hydrolysis or saponification reaction of the ester bond of the trialkylsilyl methacrylate was monitored through a ¹H NMR study showing the formation of siloxane side-products. Several copolymers and polymer blends were prepared as matrixes for controlled erodible systems. Their capacity to hydrolyse was demonstrated through SEM investigations with selective dissolution of free films containing hydrolysable copolymers and PMMA blends. Well-defined random and diblock copolymers with methyl methacrylate were investigated to show the effect of the microstructure on the erosion properties of the corresponding coatings. Poly(methyl methacrylate-b-tert-butyldimethylsilyl methacrylate) diblock copolymers synthesised through the RAFT process showed a better control of the erosion with a constant erosion rate over a long-time service in sea water at pH = 8.2. In addition, experiments showed that the erosion rate could be modulated by varying the molar proportion of hydrolysable side groups onto the copolymer backbone and the weight amount of copolymers mixed with PMMA in toluene solution.     

Characterization of organometallic polymers by 13C- and 119Sn-NMR: Configurational/compositional triads in poly(tri-n-butyltin methacrylate/methyl methacrylate)

The 1:1 and 2:1 formulations of the free radical initiated copolymers of methyl methacrylate (MMA) and tri-n-butyltin methacrylate (TBTM), and the homopolymer, poly(TBTM), are characterized by ¹³C- and ¹¹⁹C-NMR structural analyses were performed on the tributyltin-free hydrolyzate, a copolymer of MMA and methacrcylic acid (MAA). Configurational sequencing at the triad level is performed using the α-methyl region of the ¹³C-NMR spectrum. The probability of isotactic (meso) dyad placement at 80°C in the homopolymer (0.19) is determined to be significantly less than the probabilities observed for the copolymers (0.23–0.24). Random compositional sequencing is established for the copolymers through a comparison of the carbonyl regions of the ¹³C-NMR spectra of the hydrolyzates with the carbonyl regions in published spectra of structurally characterized copolymers of MMA and MAA. The ¹¹⁹Sn chemical shift and the tin-carbon J coupling for the polymers are dependent on the solvent employed. This dependence is attributed to electron donor or acceptor interactions between the solvent and the strong Sn? O dipole. The tin-containing copolymers exhibit multiple ¹¹⁹Sn resonances, which appear related to compositional sequencing.     

Antimicrobial activity on the copolymers of 2,4‐dichlorophenyl methacrylate with methyl methacrylate: Synthesis and characterization

Copolymers of monomers 2,4‐dichlorophenyl methacrylate (2,4‐DMA) and methyl methacrylate (MMA) were synthesized with different monomer feed ratios using toluene as a solvent and 2,2′‐azobisisobutyronitrile (AIBN) as an initiator at 70 °C. The copolymers were characterized by IR‐spectroscopy, and copolymer composition was determined with UV‐spectroscopy. The linearization method of Fineman–Ross was employed to obtain the monomer reactivity ratios. The molecular weights and polydispersity indexes were determined by gel permeation chromatography (GPC). Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. The homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5227–5234, 2004     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Copolymerization of methyl methacrylate with lauryl methacrylate using group transfer polymerization

The syntheses of random and block copolymers (using sequential monomer addition) of methyl methacrylate (MMA) and lauryl methacrylate (LMA) have been investigated by group transfer polymerization (GTP) over a wide composition range using tetrabutylammonium bibenzoate (TBABB) as catalyst and 1-methoxy-1-(trimethylsiloxy)-2-methyl-1-propene (MTS) as initiator in tetrahydrofuran (THF) at room temperature. The absolute molecular weight of the copolymers were determined by SEC-MALLS. The observed molecular weights were generally higher than the calculated molecular weights. However, the molecular weight distributions were very narrow (1.02–1.1). Use of trimethylsilyl benzoate as a “livingness enhancer” improved the livingness of the first block (PLMA) and block copolymers with no detectable contamination of homopolymer. Statistical copolymers of MMA and LMA were prepared, and the reactivity ratios of the two monomers under the defined conditions were determined. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1999–2007, 1997     

Atom transfer radical copolymerization of glycidyl methacrylate and allyl methacrylate, two functional monomers

Bi-functional statistical copolymers, based on allyl methacrylate (AMA) and glycidyl methacrylate (GMA), were synthesized via atom transfer radical polymerization (ATRP). The polymerization reactions were carried out in a diphenyl ether solution at low temperature, 50 °C, using ethyl 2-bromoisobutyrate (EBrIB) as an initiator, and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst. Different aspects of the copolymerization, such as the kinetic behaviour, crosslink density and gel fraction were studied. The sol fractions of the synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. The reactivity ratios were calculated from the copolymer composition, determined by ¹H NMR, and using the extended Kelen-Tüdös method. Values of 0.82 ± 0.04 and 1.22 ± 0.03 were obtained for AMA and GMA, respectively. The copolymer composition as a function of conversion degree for the different monomer molar fractions in the feed agreed with the theoretical values calculated from the Mayo-Lewis terminal model (MLTM).     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

Reactivity ratios of ethyl acrylate,n-butyl methacrylate copolymer system by 1H-NMR

Ethyl acrylate (EA) and n-butyl methacrylate (n-BMA) copolymers were prepared in solution and the composition of the copolymer samples was estimated by ¹H-NMR spectroscopic techniques. Because the characteristic signals, which vary with the composition of the copolymer, were absent, the ratio of intensities of down-field protons to that of the total protons was used for the estimation of copolymer composition. Reactivity ratios were calculated from these values by using the Kelen-Tudos differential linear equation.     

Controlled radical polymerization of anthracene‐containing methacrylate copolymers for stimuli‐responsive materials

Novel reversible networks utilizing photodimerization of crosslinkable anthracene groups and thermal dissociation were investigated. Reversible addition‐fragmentation chain transfer polymerization yielded well‐defined copolymers with 9‐anthrylmethyl methacrylate (AMMA) and other alkyl methacrylates such as methyl methacrylate (MMA) and 2‐ethylhexyl methacrylate (EHMA) having different AMMA compositions. Well‐controlled block copolymerization of AMMA and alkyl methacrylates was also successfully accomplished using a trithiocarbonate‐terminated poly(alkyl methacrylate) macro‐chain transfer agent. The anthracene‐containing copolymers showed reversibility via crosslinking based on photodimerization with ultraviolet irradiation and subsequent thermal dissociation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2302–2311     

Studies on the copolymerisation of N-isopropyl-acrylamide with glycidyl methacrylate

The paper describes the homopolymerisation and copolymerisation of N-isopropyl acrylamide (NIPAM) with glycidyl methacrylate (GMA) in solution at 60°C using azobisisobutyronitrile (AIBN) as an initiator and dioxan as solvent. Copolymers were synthesized by varying the mol fraction of GMA in the initial feed from 0.025-0.125. All the polymerization reactions were terminated at low % conversion (10-15%) and the copolymer composition was determined by measuring the epoxy content. Percent epoxy content was determined by titration method using pyridine-HCl mixture. The reactivity ratios determined using Fineman-Ross method were found to be 0.94±0.05 (r₁, NIPAM) and 1.05±0.08 (r₂, GMA). All the polymers have high molecular weights with wide molecular weight distribution as determined by gel permeation chromatography (GPC) i.e. M_n in the range of 3.7 x 10⁴ - 7.8 x 10⁴ and M_w in the range of 1.2 x 10⁵ - 4.1 x 10⁵ with a polydispersity index in the range of 2.3-5.3. Lower critical solution temperature (LCST) of NIPAM homopolymer and copolymers was determined by recording DSC scans of polymers in aqueous solution. Incorporation of GMA in the poly(NIPAM) backbone resulted in a decrease in the LCST.     

Synthesis and characterization of amphiphilic star copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Effects of architecture and composition

Six amphiphilic star copolymers comprising hydrophilic units of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and hydrophobic units of methyl methacrylate (MMA) were prepared by the sequential group transfer polymerization (GTP) of the two comonomers and ethylene glycol dimethacrylate (EGDMA) cross-linker. Four star-block copolymers of different compositions, one miktoarm star, and one statistical copolymer star were synthesized. The molecular weights (MWs) and MW distributions of all the star copolymers and their linear homopolymer and copolymer precursors were characterized by gel permeation chromatography (GPC), while the compositions of the stars were determined by proton nuclear magnetic resonance (¹H NMR) spectroscopy. Tetrahydrofuran (THF) solutions of all the star copolymers were characterized by static light scattering to determine the absolute weight-average MW () and the number of arms of the stars. The of the stars ranged between 359,000 and 565,000 g mol⁻¹, while their number of arms ranged between 39 and 120. The star copolymers were soluble in acidic water at pH 4 giving transparent or slightly opaque solutions, with the exception of the very hydrophobic DMAEMA₁₀-b-MMA₃₀-star, which gave a very opaque solution. Only the random copolymer star was completely dispersed in neutral water, giving a very opaque solution. The effective pKs of the copolymer stars were determined by hydrogen ion titration and were found to be in the range 6.5-7.6. The pHs of precipitation of the star copolymer solutions/dispersions were found to be between 8.8-10.1, except for the most hydrophobic DMAEMA_10-b-MMA₃₀-star, which gave a very opaque solution over the whole pH range.     

Unperturbed dimensions of random and alternating styrene/n-alkyl methacrylate copolymers

The steric factors σ of homopolymers of ethyl, n-butyl, and n-octyl methacrylate, of equimolar random and alternating copolymers of these monomers with styrene, and of polystyrene, were determined by measuring intrinsic viscosities in a good solvent (butanone, 25°C) and extrapolating the data thus obtained to zero molecular weight of the polymer. For all comonomeric pairs under investigation, the σ² of an equimolar random copolymer and, particularly, of an alternating copolymer, is higher than the arithmetic mean (σ + σ)/2 of the σ² values of the parent homopolymers. The positive deviation from the linear dependence of σ² on the copolymer composition, expressed as an increment of σ², is proportional to the mole fraction of alternating dyads in the copolymer chain with in the limits of experimental error. The effect of copolymer microstructure on the unperturbed dimensions of the chains has been compared for equimolar copolymers of styrene with methyl, ethyl, n-butyl, and n-octyl methacrylate by using a relative increment ξ defined as the ratio of σ² of the alternating copolymer to (σ + σ)/2. The dependence of ξ on the number of carbon atoms in the alcohol substituent of the methacrylate component of the copolymer seems to exhibit a maximum for ethyl methacrylate.     

Graft copolymerization of methyl methacrylate onto curdlan

Graft copolymerization of methyl methacrylate onto curdlan was first investigated. In the graft copolymerization initiated by ammonium persulfate (APS) in DMSO under a homogeneous condition, the resulting graft copolymers had low molecular weights and low grafting percentages. However, the initiation by APS in water gave graft copolymers having relatively higher molecular weight ( ) and higher grafting percentage (548%) than those copolymers obtained by the homogeneous condition. When the graft copolymerization was carried out by cerium (IV) ammonium nitrate-HNO₃ initiation, the graft copolymer had the highest grafting percentage of 1620% without degradation of the curdlan backbone. The resulting graft copolymers were soluble in DMSO. The graft copolymers obtained by the cerium salt had narrow molecular weight distributions () compared with those by the APS catalyst in DMSO or water. The graft copolymers decomposed with sulfuric acid to isolate PMMAs, which molecular weights were larger than that of the corresponding homo-PMMAs. The structure of the grafted copolymers was characterized by IR, ¹³C NMR, DSC, and SEM. It was found that the graft copolymers exhibited the glass transition temperature (T_g), though curdlan had no T_g. As the grafting percentage increased, the T_g increased to reach 270°C, which was higher than the decomposition temperature of curdlan. The surface image of the grafted copolymers observed by SEM, showed smoothless compared with that of curdlan. It was also revealed that the graft copolymers having the grafting percentage of 1620% swelled in common organic solvents up to 4.5 times of the weight of the dry graft copolymer to form gels. © 1996 John Wiley & Sons, Inc.