梯度穿缝型双孔隙率多孔材料的吸声性能

在传统单一孔隙率多孔材料中引入宏观尺度的周期性梯度穿缝结构设计,构造出梯度穿缝型双孔隙率多孔材料,其包含多孔材料基体微孔尺度与穿缝尺度两个尺度。采用分层等效的理论建模方法,将复杂梯度渐变问题变为多层均匀等效层叠加问题。针对不同特征尺寸的多孔材料薄层,分别采用低、高两种渗透率对比度双孔隙率理论,给出了其等效密度和动态压缩系数,再应用传递矩阵方法得到了相邻薄层之间的声压和质点速度传递关系并求得其表面声阻抗,从而建立了梯度穿缝型双孔隙率多孔材料的吸声理论模型。发展了多尺度材料声学有限元数值模型,在所考虑的100~3000 Hz频段范围内数值模拟结果完全吻合理论模型结果。理论与模拟分析了多尺度结构参数对双孔隙率多孔材料吸声性能的影响,结果表明引入多尺度梯度结构设计能够显著提高单一孔隙率多孔材料的吸声性能,且穿缝尺度比穿缝梯度影响更为显著;精细数值模拟获得的声压和能量密度分布云图揭示了多尺度结构设计的吸声增强机制。该工作可用于指导双孔隙率多孔材料的多尺度结构设计,从而提高多孔材料的中低频吸声性能。      

含三聚氰胺多孔材料分层复合介质吸声特性*

三聚氰胺泡沫材料是一种具有高开孔率的多孔材料,具备优良的吸音、防火隔热及环保性能,可以作为吸声材料与弹性板、空腔介质形成复合结构,在建筑、航空、交通工具等工程领域有广泛的应用。该文基于Biot理论和分层介质在交界面处的不同边界条件,建立非均匀复合介质背衬刚性壁面结构的理论声学模型,详细分析了多孔材料布局对复合结构吸声特性的影响。该文理论模型计算的结果与阻抗实验得到的垂直入射吸声系数基本一致,验证了理论模型的正确性。结果表明:在多孔材料前面增加空气层可以改善高频吸声特性;在多孔材料后面增加空气层可以改善复合结构低频吸声特性。通过合理配置多孔材料,可以在应用需求频段上达到满意的吸声效果。     

微穿孔蜂窝-波纹复合声学超材料吸声行为

民用及国防工业领域对工程材料结构提出了更高的应用需求.单一材料结构越来越难以满足实际应用需求,通过人工复合结构实现超常单一及多物理性能的超材料设计已经成为材料结构应用的重要发展方向.本文基于传统的蜂窝夹层结构,在其内部引入波纹结构,并在面板和波纹上分别进行微穿孔形成微穿孔蜂窝-波纹复合声学超材料,在其优异力学承载基础上,实现了低频段的宽频有效吸声降噪.应用微穿孔板吸声理论和声阻抗串并联理论,建立了微穿孔蜂窝-波纹复合声学超材料的吸声理论模型;发展了考虑黏热效应的声传播有限元模型,通过数值模拟验证了理论模型的准确性,并数值计算了声波在超材料微结构内的黏热能量耗散分布,发现超材料能量耗散主要集中于微穿孔处的黏性边界层;进一步开展了超材料吸声参数和尺度设计参数的分析讨论,阐明了不同尺度设计参数对超材料吸声性能的影响规律.本文工作对兼具力学承载与吸声降噪的新型材料结构设计有重要的理论指导价值.     

分层吸声结构的声学设计与性能分析

本文给出了声波在多层介质中的传播方程，通过数值计算，分析了各层参数对分层吸声结构声学性能的影响规律。用参数匹配方法，对多层吸声结构各层材料的参数进行设计。结果表明，通过合理分布各层材料，多层吸声结构可以在较宽频段上达到满意的吸声性能。     

阻尼耦合双层微穿孔板吸声体研究

提出并研究一种利用两板间微缝进行阻尼耦合的双层微穿孔板(DMPP)吸声体。该吸声体在两层微穿孔板(MPP)之间形成一个宽度小于1mm的微缝,因此其阻尼不仅可由板上的微穿孔提供,还可由两板之间形成的微缝提供。采用声电类比法建立了DMPP转移阻抗的理论模型,并进行实验验证,结果表明理论计算结果与实验吻合较好。然后利用建立的理论模型,对单层MPP和DMPP吸声体的吸声性能进行了对比研究,结果表明,相比于单层MPP,DMPP可以利用微缝提供的阻尼显著改善吸声性能,同时减少实际板厚。最后,对DMPP吸声体的吸声性能及其几何参数的关系进行研究,结果表明,当保持其它结构参数不变时,微缝宽度对DMPP吸声系数的提高存在一个最优值,超过或低于此值会导致吸声系数下降。     

经典局域共振型水声超材料的吸隔声性能研究*

基于水声超材料吸声机理和多层平行介质平面波理论,建立局域共振型水声超材料结构,通过COMSOL进行建模计算,研究该结构的吸声性能机理,此外为了验证钢背衬的隔声性能,在该水声超材料结构基础上添加一层0.005m厚的钢背衬进行仿真对比。研究结果表明,在频段为200Hz-4000Hz时,水声超材料声学性能较好,吸声性能整体较优,且添加钢背衬的水声超材料隔声性能较优,甚至在某频率点达到15dB的隔声差值;此外通过位移场图进一步揭示水声超材料的吸声机理,发现水声超材料结构的位移场和钢背衬都对吸声性能会产生影响,钢背衬通过影响共振吸收来影响吸声性能,而位移场则通过位移幅度大小影响吸声性能。     

一种含圆柱形谐振散射体的黏弹材料低频吸声机理研究

利用层多重散射法分析了一种含圆柱形谐振散射体黏弹 材料吸声层在钢背衬条件下的低频吸声特性. 该吸声层由包覆软材料的圆柱空腔周期嵌入橡胶材料中构成, 其中, 散射体轴线与吸声层平行. 结果表明, 20 mm厚吸声层在1000–3000 Hz具有良好的吸声性能. 通过综合分析单个散射体的吸收截面、单层周期散射体的声吸收、 结构内部位移场以及耗散功率密度分布, 揭示了该吸声层的低频吸声机理. 关键词： 水声吸声 吸收截面 耗散功率密度     

含玻璃微球的黏弹性复合材料覆盖层的水下吸声性能分析

水下吸声覆盖层对潜艇的隐身具有重要的意义, 因此得到了广泛的关注. 本文对含有玻璃微球的黏弹性复合材料覆盖层的水下吸声性能进行了理论分析. 采用等效参数法计算了玻璃微球的体积含量对复合材料的力学和声学性能的影响. 应用声波在多层介质中传播的一维模型, 计算了不同玻璃微球体积含量的单层复合材料覆盖层的吸声性能.结果表明, 增加玻璃微球的体积含量可以提高覆盖层的低频吸声性能, 但是其高频吸声性能降低.采用遗传算法对玻璃微球在覆盖层厚度方向上的体积含量分布进行优化. 优化的多层结构可以在一定的频带内改善覆盖层的表面与水的声阻抗匹配, 在保证覆盖层的高频吸声系数大于某一限值(0.7)的前提下, 提高其低频吸声性能.另外, 多层优化结构覆盖层不含宏观的空腔结构, 不影响覆盖层的耐压性能.其结构简单, 对制备工艺的要求不高.因此, 本文形成的理论方法适用于水下吸声覆盖层的设计. 关键词： 水下吸声 黏弹性复合材料 玻璃微球 遗传算法     

金属橡胶材料吸声特性研究

理论及实验研究了金属橡胶材料吸声性能参数.由金属橡胶材料声学特性参数理论计算式,推导出金属橡胶材料吸声性能参数──声阻抗率和吸声系数的理论计算公式.实验研究了金属橡胶材料结构常数和压缩模量,并建立了结构常数、压缩模量与材料结构参数的关系式,结果表明:相同平均孔隙直径金属橡胶材料具有相同的结构常数值;在一般频率范围内,相同结构参数金属橡胶材料压缩模量近似为常量.通过金属橡胶材料吸声系数的实验测量和理论计算,理论结果与实验结果符合较好,验证了理论和实验研究方法的正确性.     

半导体超晶格属性的高分辨率X射线衍射研究

详细阐述了低维半导体材料的X射线衍射的动力学理论和运动学理论从高木陶平(T-T)方程出发,基于波动光学原理,推导出任意结构的多层膜的X射线衍射振幅的递推关系式并编写X射线衍射的程序,分别用动力学和运动学衍射理论模型模拟了20层GaAlAs/GaAs超晶格的X射线衍射结果,得到超晶格样品的结构参量.     

微穿孔共振吸声结构中吸声材料的作用

详细分析了不同厚度和放置方式的吸声材料对空腔声阻抗和穿孔辐射声阻抗的影响,从而建立起微穿孔-吸声复合结构的理论分析模型,以用于预测和优化结构的吸声性能。并针对常用的几种微穿孔-吸声复合结构,通过理论分析和阻抗管实验探讨了其声学性能的不同。分析结果表明,理论计算和实验结果吻合很好,证明了模型的可用性。考虑到结构的声学性能和经济性,建议采用中部放置吸声材料的复合结构。      

Effect of sound-absorbing material on a microperforated absorbing construction

According to the thickness and the configuration of sound-absorbing material,the cavity’s acoustical impedance and the aperture’s radiation acoustical impedance is analyzed in detail.Thus,to predict and optimize the sound absorption performance of the composite structure of sound-absorbing material and microperforated panel,a theoretical model is established. And the acoustical properties of several composite structures used commonly are comparatively analyzed both in theory and experiment.Good agreement between the theoretical calculations and experimental results shows the availability of model.Taking into account the performance and economy,the composite structure of sound-absorption material in the middle of cavity is suggested.     

Sound absorption performance of gradiently slit-perforated double-porosity materials

A gradiently slit-perforated double-porosity material is proposed by introducing macro-scale periodic gradient slit-perforations into traditional porous materials with singleporosity.This material is one kind of multiscale material since it includes two scales of matrix micro-pore size and slit-perforation size.A theoretical model is developed for the sound absorption of the gradiently slit-perforated double-porosity material.In the model,the material is divided into lots of thin layers and each layer is approximated to be straight slit-perforated material.The equivalent density and dynamic compressibility of each thin layer are given by using the low or high permeability contrast double-porosity theory.Then the sound pressure and particle velocity relations between adjacent thin layers are obtained by employing the transfer matrix method.Finally,the surface acoustic impedance and the sound absorption of the gradiently slit-perforated porous material can be calculated.A finite element model is further established to validate the accuracy of the theoretical model.In the considered frequency range of 100-3000 Hz,the simulation results agree well with theoretical results.The influence of multiscale structural parameters on the sound absorption performance of the porous materials is analyzed theoretically and numerically.It is proved that the multiscale structure design can significantly improve the sound absorption performance of porous materials.Compared to the slit-perforation gradient,the slit-perforation width plays a more significant influence on sound absorption.The sound absorption enhancement mechanism of the multiscale structure design is revealed by the analysis of the sound pressure and energy dissipation distributions in the material.This work provides a multiscale structural design method for improving the sound absorption performance of traditional porous materials at broadband frequency.     

Controlling sound absorption by an upstream resistive layer

Resistive screens, or perforated plates, are widely used upstream of porous materials. They can be used either for protection or decoration, or for acoustic properties enhancement. This study points out the role that a resistive layer can have upstream on a porous material. Based on numerical simulations, this work gives the guidelines for rational use of high resistive layers in order to maximize the normal sound absorption of porous multilayers. Two major results emerge: (i) the upstream resistive layer can control the sound absorption of the porous multilayer, while nullifying the acoustic properties of downstream layer and (ii) this upstream layer may be detrimental to sound absorption of porous multilayer. Experimental validation on a porous multilayer, controlled by a woven textile, supports these findings. The sound absorption of material with poor sound absorption performance can be enhanced with a conveniently designed resistive layer.     

Homogeneous sound-absorbing structures for aircraft engine ducts

As applied to the ducts of aircraft engines, a new method is studied for extending the frequency range of sound absorption by using special homogeneous materials of a rigid structure. A through- or blind-hole perforation of such a homogeneous material is for the first time suggested with a view to substantially extend its capabilities. A theory is developed for sound-absorbing structures of perforated homogeneous material that allows for computing their wave parameters and impedance on the basis of those of the starting material. Based on this theory, one can calculate the impedance of any, no matter how complex a structure built up of several layers differing in thickness and perforation percentage and diameter. The results of calculations made for the impedance and sound absorption coefficient of single and multiple layer samples show good agreement with experimental data.     

On the sound absorption performance of a felt sound absorber

In this work, we have developed an analytical model of a multilayer porous material based on the transfer matrix method to predict the absorption behavior at plane wave incidence. The aim of this study is to modify/tune the sound absorption coefficient of a felt to obtain an improved absorbing performance in the mid frequency range without increasing its weight. To achieve this target, the developed model has been used to find the best combination of each layer type and thickness. The analytical results were validated by test results.     

Manufacturing and modelling of sintered micro-porous absorption material for low frequency applications

A novel sintering based method to produce thin ultrahigh molecular weight polyethylene, UHMWPE, absorption material layer to increase absorption at low frequencies is introduced. The experimental impedance tube measurement results show that a 4 mm thick sintered sample layer increases absorption at a low frequency range below 1000 Hz compared with commercial melamine and polyester absorption foam samples. To cover a wider frequency range, multilayer structures composed of a sintered micro-porous material layer and commercial melamine and polyester foam layers are created and examined. The sintered sample layer also increases absorption in multilayer structures at low frequencies. Absorption coefficient values above 0.5 are reached starting from 200 Hz with multilayer structures. Software exploiting Biot’s theory of porous materials has been adopted to fit the experimental absorption data for sintered samples, commercial foams and multilayers. Software based on Biot’s theory was found to deliver quite good correlation with measured absorption coefficient values, with disagreements below 10% between the measured and estimated values.     

释压法混合吸声系统中多孔材料厚度优化研究

研究释压法主被动混合吸声结构吸声性能与多孔吸声材料参数的关系,利用释压法对材料厚度敏感的特性,选择合适的多孔材料厚度提高系统的低频吸声性能。提出一种释压法主被动混合双层吸声结构,将误差传声器置入两层吸声结构之间的空气层中,分别优化各层的厚度,在较宽频带内获得较好吸声。对流阻系数为15000NSm^-4的一类典型的玻璃棉数值仿真,发现选择优化厚度分别为2.8 cm和6 cm,中间空腔长为2 cm,可使有效吸声频带向下大幅扩展。实验结果验证了所提宽带吸声结构。