铁掺杂TiO2纳米管阵列对不锈钢的光生阴极保护

在含FeSO4的HF、H2SO4/HF、NaF/Na2SO4溶液中,通过电化学阳极氧化直接在纯钛表面制备Fe 掺杂的TiO2(Fe-TiO2)纳米管阵列. 应用X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外-可见吸收光谱(UV-Vis)、X 射线光电子能谱(XPS)等手段对纳米管阵列的结构、形貌及化学组成进行表征. 利用光电化学测量研究Fe-TiO2纳米管阵列在不同波长范围内的光电响应特性和光生阴极保护行为. 考察了温度、时间、掺杂含量等参数对TiO2纳米管阵列的几何尺寸、形貌和光电性能的影响. 结果表明, Fe掺杂可有效减缓TiO2纳米管阵列载流子的复合, 窄化TiO2带隙宽度, Fe-TiO2在410-650 nm范围显示强吸收, 并使光谱响应扩展到波长大于400 nm 的可见光区. 实验结果还表明, Fe-TiO2纳米管阵列对316不锈钢(316L)具有良好的光生阴极保护作用, 暗态下阴极保护作用可继续维持.     

TiO2纳米管电极金属离子掺杂的表征

采用浸渍法对TiO₂纳米管电极进行Zn²⁺、Fe³⁺、Cu²⁺离子的掺杂改性,并进行了各种性能表征.扫描电镜(SEM)及X射线衍射光谱(XRD)结果表明,金属离子掺杂后的TiO₂纳米管电极依然保持了良好的表面形态及锐钛矿晶型,纳米管的直径为60-100 nm,其晶面主要为101面;可见紫外漫反射光谱(DRS)分析表明,进行掺杂的TiO₂纳米管电极的光学性质有不同程度的改变,Zn²⁺、Fe³⁺和Cu²⁺掺杂的TiO₂纳米管电极的禁带宽度分别为3.37 eV3、.14 eV、2.86 eV.这表明掺Cu²⁺的TiO₂纳米管电极的吸收边带发生了明显的红移.     

Synthesis and characterization of ultrahigh crystalline TiO2 nanotubes

Ultrahigh crystalline TiO2 nanotubes were synthesized by hydrogen peroxide treatment of very low crystalline titania nanotubes (TiNT-as prepared), which were prepared with synthesized TiO2 nanoparticles by hydrothermal methods in an aqueous NaOH solution. Thus, prepared ultrahigh crystalline TiO2 nanotubes (TiNT-H2O2) showed comparable crystallinity with high crystalline TiO2 nanoparticles. The details of nanotubular structures were elucidated by high resolution-transmission electron microscopy (HR-TEM), field emission-scanning electron microscopy (FE-SEM), energy-dispersive X-ray analysis in transmission electron microscopy (TEM-EDX), X-ray diffraction (XRD), photoluminescence (PL), and BET surface area. TiNT-H2O2 was found to be a multiwalled anatase phase only with an average outer diameter of approximately 8 nm and an inner diameter of approximately 5 nm and grown along the [001] direction to 500-700 nm long with an interlayer fringe distance of ca. 0.78 nm. The photocatalytic activity of TiNT-H2O2 was about 2-fold higher than those of TiNT-as prepared, synthesized TiO2 nanoparticles, and TiO2-P25 (Degussa) in the photocatalytic oxidation of trimethylamine gas under UV irradiation.     

Composite polymer nanofibers with carbon nanotubes and titanium dioxide particles

Composite nanofibers containing nanometric TiO2 particles and multiwalled carbon nanotubes dispersed in poly(acrylonitrile) (PAN) were prepared by the electrospinning technique. The structure and quality of the precursor dispersions were evaluated by cryo-transmission electron microscopy. The fabricated nanofibers, the diameters of which were in the 20-200 nm range, contained well-oriented nanotubes and spherical TiO2 nanoparticles in close proximity. Such nanofibers are under investigation as new photocatalytic reactor elements.     

Solvent-controlled synthesis and electrochemical lithium storage of one-dimensional TiO2 nanostructures

In this paper, one-dimensional (1-D) nanostructured TiO2 of different morphologies and structures have been selectively synthesized via a convenient, low-temperature solvothermal route and following calcination. Transmission electron microscopy, selected area electron diffraction, X-ray diffraction, and Brunauer-Emmett-Teller methods were used to characterize the morphology, crystalline structure, and specific surface area of these nanostructured TiO2. The formation of different morphologies, including nanowires and nanotubes, was achieved through a deliberate control of the cosolvent. In addition to the solvent-controlled procedures, another important feature of the synthesis in the present study was that either single-crystalline nanowires (TiO2-B) or polycrystalline nanotubes (anatase and TiO2-B) were achieved by heat treatment at 350 degrees C. The electrochemical performances of the nanowires and nanotubes were further explored in terms of their potential application as anode materials for lithium-ion batteries. The lithium-insertion reactions involved in the two materials were elucidated by means of a galvanostatic method, cyclic voltammetry, and electrochemical impedance spectroscopy. The results suggest that both the crystalline structure and the unique 1-D morphology might be responsible for their favorable electrochemical properties. This work will be valuable for the understanding of the formation of nanostructured TiO2 by the wet-chemistry process and further applications.     

One-step solvothermal synthesis of single-crystalline TiOF2 nanotubes with high lithium-ion battery performance

Single-crystalline TiOF(2) nanotubes were prepared by a one-step solvothermal method. The nanotubes are rectangular in shape with a length of 2-3?μm, width of 200-300?nm, and wall thickness of 40-60?nm. The formation of TiOF(2) nanotubes is directly driven by the interaction between TiF(4) and oleic acid in octadecane to form the 1D nanorods, and this is followed by a mass diffusion process to form the hollow structures. The synthesis approach can be extended to grow TiOF(2) nanoparticles and nanorods. Compared with TiO(2), which is the more commonly considered anode material in lithium-ion batteries, TiOF(2) has the advantages of a lower Li-intercalation voltage (e.g., to help increase the total voltage of the battery cell) and higher specific capacities. The TiOF(2) nanotubes showed good Li-storage properties with high specific capacities, stable cyclabilities, and good rate capabilities.     

TiO_2纳米管阵列的制备及其对316不锈钢光生阴极保护作用的研究

应用直接电化学阳极氧化法,于含氟电解液中,在纯钛表面制备一层整齐有序的TiO2纳米管阵列.扫描电子显微镜(SEM),X射线衍射(XRD)表征该纳米管阵列的形貌及晶体结构,光电化学联用系统研究其光电响应特性及对316L的光生阴极保护作用.结果表明:以TiO2纳米管阵列膜作为光生阳极时,在紫外光区(λ<387nm)有显著增强的光生电流响应,并对316不锈钢有较好的光生阴极保护作用.暗态下,光生电极电位仍可维持较长的一段时间,继续起到阴极保护作用.     

Amplified quenching of electrochemiluminescence from CdS sensitized TiO2 nanotubes by CdTe-carbon nanotube composite for detection of prostate protein antigen in serum

This work reports an ECL immunoassay method for ultrasensitive detection of prostate protein antigen (PSA), by remarkably efficient energy-transfer induced electrochemiluminescence (ECL) quenching from the CdS nanoparticles (NPs) sensitized TiO(2) nanotube array (CdS-TiO(2) NTs) to the activated CdTe NPs functionalized multi-wall carbon nanotubes (CdTe-MWNTs) composite. The coupling of TiO(2) and CdS NPs results in a cathodic ECL intensity 14.7 times stronger than that of the pure TiO(2) NTs electrode, which could be efficiently quenched by the CdTe-MWNTs. The enhanced mechanism of TiO(2) NTs ECL by CdS NPs was studied in detail by cyclic voltammetry and ECL spectroscopy. The strong absorption of the CdTe-MWNTs in the wavelength range of 400-800 nm renders them highly efficient for ECL quenching labeled on anti-PSA antibody. Based on a sandwich structure, we developed an ECL immunoassay method for the sensitive and selective detection of PSA. The ECL intensity decrement was logarithmically related to the concentration of the PSA in the range of 1.0 fg mL(-1) to 10 pg mL(-1) with a detection limit of 1 fg mL(-1). Human serum samples were then tested using the proposed immunoassay with excellent correlations, suggesting that the proposed immunoassay method is of great promise in clinical screening of cancer biomarkers.     

透明TiO2纳米管/FTO电极制备及表征

采用射频磁控溅射方法在透明导电玻璃(FTO)上沉积纯钛薄膜, 室温条件下在H3PO4+HF电解液中通过恒压阳极氧化方法得到TiO2纳米管阵列, 并通过场发射扫描电子显微镜(FESEM)、X射线衍射(XRD)、UV-Vis透射光谱以及光电化学的方法对纳米管阵列进行了表征. 研究表明, 在电压为20 V、氧化时间为50 min时, 钛薄膜转化为TiO2纳米管阵列, 管长约为380 nm, 内径约为90 nm, 管壁约为15 nm; 再经过500 ℃空气热处理6 h之后得到锐钛矿型的TiO2纳米管/FTO透明电极, 在可见光区的平均透过率约为80%, TiO2禁带宽度为3.28 eV, 发生了蓝移, 带尾扩展到2.6 eV; 此外, 对结晶前后的复合电极分别在暗态和紫外光下进行线性扫描和瞬态光电流测试, 结果表明, 结晶的电极表现出更好的光电转换性能; 施加阳极电压和紫外光照射都能够促进TiO2光生载流子有效分离,使电子迅速传至导电玻璃表面通过外电路形成光电流.     

Self-organized TiO2 nanorod arrays on glass substrate for self-cleaning antireflection coatings

Herein we report the direct fabrication of TiO(2) subwavelength structures with 1-dimensional TiO(2) nanorods on glass substrate through solvothermal process to form self-cleaning antireflection coatings. TiO(2) precursor solutions with different solvent constituents create TiO(2) nanorods with much different morphologies grown on glass substrates. Apiculate TiO(2) nanorods with vertical orientation are grown on the glass substrate which is solvothermally treated in the precursor solution containing ethylene glycol. This glass substrate exhibit the highest transmittance of 70-85% in the range of 520-800 nm and negligible absorption in visible light region (400-800 nm). Furthermore, the TiO(2) nanorod arrays show high hydrophobicity and photocatalytic degradation ability which offer the glass substrate self-cleaning properties for both hydrophilic and oily contaminants.     

Formation of anatase TiO2 nanoparticles on carbon nanotubes

Anatase TiO2 nanoparticles with a size range of 2 to 10 nm have been formed on carbon nanotubes by the controlled hydrolysis and condensation of titanium bis-ammonium lactato dihydroxide in water and electrosterically dispersed carbon nanotubes.     

可见光响应的LaVO4/TiO2 纳米管的合成、表征及对气相甲苯的光催化性能

通过水热方法合成了可见光响应的LaVO4/TiO2纳米管, 采用XRD, TEM, 氮气吸附-脱附以及表面光电压谱对样品进行了表征. 以气相甲苯为典型污染物, 研究了制备样品在可见光(λ＞420 nm)条件下的光催化性能. 实验结果表明, LaVO4的复合使TiO2的粒径减小, 比表面积增大, 光响应范围向可见光偏移. 光催化实验结果表明, 在可见光条件下, LaVO4/TiO2纳米管降解甲苯的效率比其它样品高, 与纯TiO2纳米管相比, 降解效率提高了47%.     

Hierarchically branched titania nanotubes with tailored diameters and branch numbers

Over the past decade, electrochemical anodization of self-organized TiO(2) nanotubes has been studied intensively with the main focus being on uniform diameters along the TiO(2) nanotube depth direction. In the present work, hierarchically branched TiO(2) nanotubes with tailored diameters and branch numbers are successfully achieved by adjusting the anodization voltage. Reducing the applied voltage by a factor of 1/√n causes a one trunk nanotube to diverge into n-branched TiO(2) nanotubes, whose diameters are 1/√n of the trunk nanotube diameter (n is an integer). Multiple layers of branched TiO(2) nanotubes are also obtained by further dividing the branched nanotubes when the applied voltage is further reduced step-by-step with a 1/√n factor. Enlargement and termination of TiO(2) nanotubes occur when the anodization voltage increases by √n times. Alternating increase and decrease in the applied voltage lead to a more sophisticated hierarchical structure of TiO(2) nanotubes. The fundamental understanding of these processes is discussed.     

TiO2纳米管阳极氧化制备机理及热处理对其影响

采用阳极氧化方法,在NH4F+H2O的乙二醇溶液体系下制备了TiO2纳米管列阵薄膜,建立了TiO2纳米管列阵薄膜的"电场诱导"生长模型。TiO2纳米管的管形结构形成与TiO2的半导体性质相关。纳米管表面吸附的纳米粒子与管壁间空间有关系。经过退火处理的纳米管管口由12~14个直径为25~35 nm的纳米颗粒团聚体组成,600℃时,纳米管结构已被破坏。经过300~600℃之间不同温度处理后的TiO2纳米管呈现锐钛矿晶态,比表面积随温度升高呈下降趋势。     

多酸修饰二氧化钛纳米管复合膜的制备、表征及其光催化降解甲基橙的研究

采用电沉积方法制备了H3PW12O40(PW12)-TiO2复合膜,通过SEM,EDX和XRD等手段,对其组成和结构进行了表征,并考察了该复合膜催化剂对降解甲基橙的催化活性.实验结果表明PW12存在于TiO2纳米管结构中,用PW12多酸修饰的TiO2纳米管比单独的TiO2纳米管展示出更好的光催化性能,由于电子能够从TiO2纳米管导带转移到多酸的LUMO能级,有效抑制了光生电子和空穴的复合,因而使PW12-TiO2复合膜表现出更高的光催化活性.     

Synthesis and growth mechanism of titanate and titania one-dimensional nanostructures self-assembled into hollow micrometer-scale spherical aggregates

Three-dimensional, dendritic micrometer-scale spheres of alkali metal hydrogen titanate 1D nanostructures (i.e., nanowires and nanotubes) have been generated using a modified hydrothermal technique in the presence of hydrogen peroxide and an alkali metal hydroxide solution. Sea-urchin-like assemblies of these 1D nanostructures have been transformed into their hydrogen titanate analogues (lepidocrocite HxTi2-x/4squarex/4O4 (x approximately 0.7, square: vacancy)) by neutralization as well as into their corresponding anatase TiO2 nanostructured counterparts through a moderate high-temperature annealing dehydration process without destroying the 3D hierarchical structural motif. The as-prepared hollow spheres of titanate and titania 1D nanostructures have overall diameters, ranging from 0.8 to 1.2 microm, while the interior of these aggregates are vacuous with a diameter range of 100 to 200 nm. The constituent, component titanate and TiO2 1D nanostructures have a diameter range of 7+/-2 nm and lengths of up to several hundred nanometers. A proposed two-stage growth mechanism of these hollow micrometer-scale spheres was supported by time-dependent scanning electron microscopy, atomic force microscopy, and inductively coupled plasma atomic emission spectrometry data. We have also demonstrated that these assemblies are active photocatalysts for the degradation of synthetic Procion Red dye under UV light illumination.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.