Core stratification effects on natural convection in inclined cavities

A numerical and experimental study has been made on the flow and heat transfer in inclined air-filled cavities with aspect ratios 1–18 at Ra numbers from 2·10⁴–5·10⁵ and angles of inclination from 40 to 90°. Core stratification influences the flow. Due to this there arises a torque with two components depending on angle of inclination. On basis of the two torques the computed effects on flow and temperature fields can be explained. For the heat transfer a scaling law could be derived. Experimental data validate the numerical studies.     

Mass transport effect on the heat transfer coefficient during boiling of multicomponent mixture

In this work a simplified calculation method taking into account the effect of mass transport on the heat transfer coefficient (HTC) during boiling of multicomponent mixture has been elaborated. The calculation results were compared with own experimental data for ternary system methanol–isopropanol–water and Grigoriev data [1] (acetone–methanol–water). The experiments were performed in different hydrodynamic conditions such as: pool boiling and liquid evaporation at the free surface of the falling film. The experimental data covered wide range of heat fluxes from 6 to 30 kW/m² in the case of liquid evaporation from the falling film and from 30 to 240 kW/m² for pool boiling. The analysis of the results indicates that the mass transfer resistance in the liquid phase caused a significant reduction of experimental value HTC in comparison to so-called ideal HTC.     

Experimental studies on heat and mass transfer performance of a coiled tube absorber for R134a-DMAC based absorption cooling system

Absorber is an important component in vapor absorption refrigeration system and its performance has greater influence in overall efficiency of absorption machines. Falling film heat and mass transfer in an absorber is greatly influenced by fluid properties, geometry of heat exchanger and its operating parameters. This paper presents on the results of experimental studies on the heat and mass transfer characteristics of a coiled tube falling film absorber, using 1,1,1,2-Tetrafluroethane(R-134a) and N-N Dimethyl Acetamide (DMAC) as working fluids. The effects of film Reynolds number, inlet solution temperature and cooling water temperature on absorber heat load, over all heat transfer coefficient and mass of refrigerant absorbed are presented and discussed. Normalized solution and coolant temperature profiles and refrigerant mass absorbed along the height of absorber are also observed from the experimental results. The optimum over all heat transfer coefficient for R-134a–DMAC solution found to be 726 W/m²K for a film Reynolds number of 350. The R-134a vapour absorption rate is maximum in the normalized coil height of 0.6 to 1.     

Heat transfer to non-newtonian laminar falling liquid films with smooth wave free gas—liquid interface

The present paper investigates analytically the problem of heat transfer to a non-Newtonian laminar falling liquid film flowing along an inclined wall for the thermally developing and thermally developed regions. In the developing region of the temperature profile, the Nusselt number decreases monotonically until the thermal boundary layer touches the interface. But immediately after this point, the liquid film thickness decreases as well as the temperature difference in the film. The influence of parameters such as α (i.e. Fr/Re_mod ratio), γ (i.e. modified form of ?μ), modified Prandtl number and the flow behaviour index “n’ on heat transfer results is also presented.     

Experimental analysis of the local heat transfer coefficient of falling film evaporation with and without co-current air flow velocity

This paper presents the experimental results of the local heat transfer for falling film evaporation of water sheet by solving the inverse heat conduction problem. It is shown that the local heat transfer coefficients increase by increasing the air flow velocity, the film liquid flow rate or decreasing the inlet bulk film temperature. Correlations for the mean heat transfer coefficients in the absence of superimposed flow for the stagnation region, the thermally developed region and the bottom of the heated cylinder are proposed.     

Study on the equivalent convection coefficient of the hot surface of blast furnace stave

The calculation models of the equivalent convection coefficient between blast furnace gas flow and the hot surface of stave body, gas flow and in-laid brick were established by the combination of experiments and numerical calculation when the gas temperature is in the range of 505–1,248°C. The reason why the heat transfer coefficient between gas flow and in-laid brick is much more than that between gas and stave body was analyzed when the gas temperature is high. The opinion just to considering a kind of integration heat transfer coefficient while the numerical calculation of heat transfer model of stave will be changed. The division of above two heat transfer coefficients will increase the degree of heat transfer numerical calculation.     

Heat and mass transfer of a water film falling down a tilted plate with radiant heating and evaporation

This paper has concerned the heat and mass transfer of a water film falling down a tilted plate with radiant heating and water evaporation. A cluster of physical models was developed for evaluating the properties of heat and mass transfer. A fully implicit control-volume finite-difference procedure was used to solve the coupling equations. The effects of various parameters on heat and mass transfer were investigated. The results showed that the mass fraction of water vapor in ambient atmosphere and the flow turbulence played key roles in the heat and mass transfer. The ambient atmospheric temperature dramatically affected the sensible heat flux. However its effect on the latent heat flux is negligibly small. The magnitude of solar incident flux had an intense influence on the water film temperature. Received on 29 January 1998     

A numerical study on the absorption of water vapor into a film of aqueous LiBr falling along a vertical plate

Absorber is an important component in absorption machines and its characteristics have significant effects on the overall efficiency of absorption machines. This article reports a model of simultaneous heat and mass transfer process in absorption of refrigerant vapor into a lithium bromide solution of water––cooled vertical plate absorber in the Reynolds number range of 5 < Re < 150. The boundary layer assumptions were used for the transport of mass, momentum and energy equations and the fully implicit finite difference method was employed to solve the governing equations in the film flow. Dependence of lithium bromide aqueous properties to the temperature and concentration and film thickness to vapor absorption was employed. This model can predict temperature, concentration and properties of aqueous profiles as well as the absorption heat and mass fluxes, heat and mass transfer coefficients, Nusslet and Sherwood number of absorber. An analysis for linear distribution of wall temperature condition carries out to investigation the reliability of the present numerical method through comparing with previous investigation.     

Simultaneous heat and mass transfer inside a vertical tube in evaporating a heated falling alcohols liquid film into a stream of dry air

A numerical study of the evaporation in mixed convection of a pure alcohol liquid film: ethanol and methanol was investigated. It is a turbulent liquid film falling on the internal face of a vertical tube. A laminar flow of dry air enters the vertical tube at constant temperature in the downward direction. The wall of the tube is subjected to a constant and uniform heat flux. The model solves the coupled parabolic governing equations in both phases including turbulent liquid film together with the boundary and interfacial conditions. The systems of equations obtained by using an implicit finite difference method are solved by TDMA method. A Van Driest model is adopted to simulate the turbulent liquid film flow. The influence of the inlet liquid flow, Reynolds number in the gas flow and the wall heat flux on the intensity of heat and mass transfers are examined. A comparison between the results obtained for studied alcohols and water in the same conditions is made.     

Laminar heat transfer characteristics of internally finned tube with sinusoidal wavy fin

Comparative numerical study of laminar heat transfer characteristics of annular tubes with sinusoidal wavy fins has been conducted both experimentally and numerically with Re = 299–1,475. The uniform heat flux is imposed on the tube outside wall surface. Two tube materials (copper and stainless steel) are considered. It is found that the fluid temperature profile is not linear but convex along the flow direction due to the axial heat conduction in tube wall, and the effects of axial heat conduction on the heat transfer decreases with an increase in Reynolds number or decrease in tube wall thermal conductivity. The axial distributions of local Nusselt number could reach periodically fully developed after 3–5 cycles. The convectional data reduction method based on the traditional method should be improved for tube with high thermal conductivity or low Reynolds numbers, Otherwise, the heat transfer performance of internally finned tube may be underestimated.     

Local film thickness and temperature distribution measurement in wavy liquid films with a laser-induced luminescence technique

Heat transfer in falling liquid film systems is enhanced by waviness. Comprehension of the underlying kinetic phenomena requires experimental data of the temperature field with high spatiotemporal resolution. Therefore a non-invasive measuring method based on luminescence indicators is developed. It is used to determine the temperature distribution and the local film thickness simultaneously. Results are presented for the temperature distribution measurement in a laminar-wavy water film with a liquid side Reynolds number of 126 flowing down a heated plane with an inclination angle of 2° at two positions in flow direction. The measured temperature distributions are used to calculate the local heat transfer coefficient for solitary waves at two positions in flow direction.     

Heat and mass transfer characteristics of a new combined absorber-evaporator exchanger operating near the triple point of water

The present experimental study investigates the controlling mechanism involved in a new combined vertical film-type absorber-evaporator exchanger operating near the condition of the triple point of water. This peculiar exchanger plays the most important role in the VFVPE process that can be utilized in many industrial applications, water pollution prevention, desalination, and purification of chemicals, for example. The method of analogy of the heat and mass transfer near the film surface is used to calculate the interfacial concentration and temperature, and thus determining the heat and mass transfer coefficients. It is shown that the working temperature level has the negligible effect on the characteristics of the mass transfer. The mass transfer coefficients are higher than those obtained in the case of isothermal absorption due to the convective effect arisen from vapor absorption in the falling solution film. The water flow rate in the evaporator side has a minor effect on the performance of this combined exchanger. The overall mean heat transfer coefficient remains nearly constant in the lower range of the solution flow rate of the absorber; however, it would increase with increasing solution flow rate in the higher range. The correlating equations for both the heat and mass transfer coefficients are suggested.     

Heat flux measurement over a cone in a shock tube flow

This paper is the part 2 of our previous thin film heat transfer measurements. In the first report we measured time variations of heat flux over a cylinder placed in a shock tube flow and compared experimental results with CFD results, Saito et al. (Shock Waves 14:327–333, 2004). We report a result of heat transfer measurements over an 86° apex angle cone surface impinged by a Ms = 2.38 shock wave in air with distributed thin film transfer gauges along cone surface and its comparison with results of numerical simulations. We performed double exposure holographic interferometric observation, and also from the heat transfer measurement and numerical simulation, confirmed the presence of delayed transition from regular to Mach reflection over the cone. The numerical estimation of delayed transition distance from the apex agreed very well with experimental one.      

Combined heat and mass transfer in laminar gas stream flowing over an evaporating liquid film

A numerical analysis was carried out to study the detailed heat and mass transfer characteristics in laminar gas stream flowing over a falling liquid water film by solving the respective governing equations for the liquid film and gas stream together. It was observed that the cooling of the liquid film is mainly caused by the latent heat transfer connected with the vaporization of the liquid film. Significant liquid cooling results for the system with a high inlet liquid temperature, high gas stream velocity or a low liquid flowrate. Additionally, the predicted Nusselt and Sherwood numbers were correlated.     

波纹竖板层流降膜蒸发传热的分析

对高粘度液体在等温正弦形波纹壁面上的自由降落与蒸发建立了摄动分析模型。得到了流动的分析解和蒸发传热的数值解。考察了壁面波纹的波幅和波数、液膜表面张力及贝克利数对流动与传热的影响,结果表明,加大波纹的波幅、适当选择波数、减小贝克利数可增强传热,而表面张力对蒸发传热的影响较小。     

Numerical Study of Heat Transfer in a Rectangular Channel with Porous Covering Obstacles

A numerical study is performed to analyze steady laminar forced convection in a channel in which discrete heat sources covered with porous material are placed on the bottom wall. Hydrodynamic and heat transfer results are reported. The flow in the porous medium is modeled using the Darcy–Brinkman–Forchheimer model. A computer program based on control volume method with appropriate averaging for diffusion coefficient is developed to solve the coupling between solid, fluid, and porous region. The effects of parameters such as Reynolds number, Prandtl number, inertia coefficient, and thermal conductivity ratio are considered. The results reveal that the porous cover with high thermal conductivity enhances the heat transfer from the solid blocks significantly and decreases the maximum temperature on the heated solid blocks. The mean Nusselt number increases with increase of Reynolds number and Prandtl number, and decrease of inertia coefficient. The pressure drop along the channel increases rapidly with the increase of Reynolds number.     

An investigation on near wall transport characteristics in an adiabatic upward gas–liquid two-phase slug flow

The near-wall transport characteristics, inclusive of mass transfer coefficient and wall shear stress, which have a great effect on gas–liquid two-phase flow induced internal corrosion of low alloy pipelines in vertical upward oil and gas mixing transport, have been both mechanistically and experimentally investigated in this paper. Based on the analyses on the hydrodynamic characteristics of an upward slug unit, the mass transfer in the near wall can be divided into four zones, Taylor bubble nose zone, falling liquid film zone, Taylor bubble wake zone and the remaining liquid slug zone; the wall shear stress can be divided into two zones, the positive wall shear stress zone associated with the falling liquid film and the negative wall shear stress zone associated with the liquid slug. Based on the conventional mass transfer and wall shear stress characteristics formulas of single phase liquid full-pipe turbulent flow, corrected normalized mass transfer coefficient formula and wall shear stress formula are proposed. The calculated results are in good agreement with the experimental data. The shear stress and the mass transfer coefficient in the near wall zone are increased with the increase of superficial gas velocity and decreased with the increase of superficial liquid velocity. The mass transfer coefficients in the falling liquid film zone and the wake zone of leading Taylor bubble are lager than those in the Taylor bubble nose zone and the remaining liquid slug zone, and the wall shear stress associated falling liquid film is larger than that associated the liquid slug. The mass transfer coefficient is within 10⁻³ m/s, and the wall shear stress below 10³ Pa. It can be concluded that the alternate wall shear stress due to upward gas–liquid slug flow is considered to be the major cause of the corrosion production film fatigue cracking.     

Heat transfer in the flow of a cold,two-dimensional draining sheet over a hot,horizontal cylinder

The paper considers heat transfer characteristics of thin film flow over a hot horizontal cylinder resulting from a cold vertical sheet of liquid falling onto the surface. The underlying physical features of the developing film thickness, velocity and temperature distributions have been illustrated by numerical solutions of high accuracy for large Reynolds numbers using the modified Keller box method. The solutions for film thickness distribution are good agreement with those obtained using the Pohlhausen integral momentum technique thus providing a basic confirmation of the validity of the results presented.     

Laminar film condensation from downward flowing superheated vapors onto a non-isothermal sphere

 A model is developed for the study of mixed convection film condensation from downward flowing superheated vapors onto a sphere with variable wall temperature. The model combined natural convection dominated and forced convection dominated film condensation, including effects of superheated vapor, pressure gradient and wall temperature variation can be solved numerically by the fourth-order Runge–Kutta technique. By the present numerical approach, the mean heat transfer is evaluated up to the critical angle of the condensate layer, φ_c. In general, the result of mean heat transfer shows that, as A, the wall-temperature amplitude, increases, the value of with inclusion of P, the pressure gradient effect, goes down slightly, however, the value of with the pressure gradient effect ignored will remain almost uniform. Further, for P=2.0, the mean heat transfer coefficient increases significantly, by 8.6–23.9%, depending on A, as the superheat parameter, S p, increases within a practical range. Received on 7 September 2000     

Characteristics of air and water velocity fields during natural convection

Air and water velocity fields have been simulated during natural convection, using a two-dimensional volume of fluid (VOF) model. The results have shown that during unstable thermal stratification, the root-mean-square (RMS) airside velocities are an order of magnitude higher than the RMS waterside velocities, whereas, during the stable thermal stratification, the velocity magnitudes are comparable for air and water sides. Furthermore, the magnitude of the air velocity changed more rapidly with the change in the bulk air–water temperature difference than the water velocity, indicating that the air velocities are more sensitive to the bulk air and water temperature difference than the water velocities. A physical model of the heat and mass transfer across the air–water interface is defined. According to this model, the vortices on the air and water sides play an important role in enhancing the heat and mass transfer. Due to the significance of the flow velocities in the transport process, it has been proposed that the correlations for the heat and mass transfer during natural convection should be improved by incorporating the flow velocity as a parameter.