Chiral separation with ligand-exchange micellar electrokinetic chromatography using a D-penicillamine-copper(II) ternary complex as chiral selector

D-Penicillamine is demonstrated for the first time as a chiral ligand for the enantioseparation of dansyl amino acids based on ligand-exchange micellar electrokinetic chromatography (LE-MEKC). Copper(II) was used as the central ion in the ternary complex. The effect of surfactant on the resolution was significant. A concentration of 20 mM sodium dodecyl sulfate (SDS) was shown to be necessary for the separation. Other important parameters, such as the concentration ratio of D-penicillamine (D-PEN) to Cu2+, the kind of metal central ion, the type and pH value of buffer, were also investigated. N-Acetyl-D-penicillamine and L-valine (Val), with similar structure to D-penicillamine, were applied as their copper(II) complexes as chiral selector and the chiral recognition mechanism is briefly discussed. Under optimum experimental conditions, i.e., 20 mM NH4OAc, pH 6.5, a 2:1 concentration ratio of D-penicillamine to Cu(II), 4 mM CuSO4 and 8 mM D-penicillamine, the chiral separation of eight pairs of different dansyl amino acid enantiomers was accomplished with resolution ranging from 1.1 to 5.9. When L-PEN was used instead of D-PEN, reversal of the migration order was observed.     

Separation of dansylated amino acid enantiomers by chiral ligand-exchange CE with a zinc(II) L-arginine complex as the selecting system

A facile chiral ligand-exchange capillary electrophoretic method has been explored for the enantioseparation and UV detection of dansyl-amino acids with Zn(II) L-arginine complex as a chiral selecting system. Successful enantioseparation of 17 pairs of amino acid enantiomers has been achieved with a buffer of 100 mM boric acid, 5 mM ammonium acetate, 3 mM ZnSO4 and 6 mM L-Arg at pH 8.0, of which 10 pairs were fully resolved with resolution in between 1.59 and 4.21. This new method was shown to be applicable to the separation of some mixed pairs of amino acids and to the quantitative analysis of some real samples such as rice vinegars, with a linear range between 0.8 and 150 microg/mL, correlation coefficient above 0.99 and recovery in between 90.1 and 112.4%. It was found that amino acids with low resistance side chain(s), low tendency to form intramolecular hydrogen bond or high tendency to form intermolecular hydrogen bonds are more easily enantioseparated than those with extra carboxyl and/or phenyl groups. By the use of the suggested buffer, the running pH should be selected at 7.4-9.0 to compromise the resolution and elution speed.     

Direct chiral resolution of malic acid in apple juice by ligand-exchange capillary electrophoresis using copper(II)-L-tartaric acid as a chiral selector

Chiral resolution of native DL-malic acid was achieved by ligand-exchange capillary electrophoresis using copper(II)-L-tartrate as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of malic acid were studied. The running conditions for optimum separation of malic acid were found to be 1 mM copper(II) sulfate-1 mM L-tartrate (pH 5.1) with an effective voltage of -20 kV at 30 degrees C, using direct detection at 280 nm, and resolution (Rs) of racemic malic acid was approximately 4. With this system, D- and L-malic acids in apple juice were analyzed successfully.     

Chiral separation of amino acids and glycyl dipeptides by chiral ligand-exchange capillary electrophoresis comparing Cu(II), Co(II), Ni(II) and Zn(II) complexes of three different sugar acids

This paper deals with comparative studies on the use of copper(II), cobalt(II), nickel(II) and zinc(II) complexes of d-gluconic acid, d-saccharic acid and l-threonic acid as chiral selectors for the enantioseparation of aromatic amino acids and glycyl dipeptides using the principle of ligand-exchange capillary electrophoresis. Although copper(II) is the most frequently used central ion in ligand-exchange capillary electrophoresis, in the case of d-gluconic acid cobalt(II) was shown to be an alternative for the enantioseparation of amino acids. Glycyl dipeptides, however, were resolved only with copper(II) complexes. Zn(II) as a central ion was not effective in all cases and with Ni(II) only some partial separations were achieved.     

Chemically L-prolinamide-modified monolithic silica column for enantiomeric separation of dansyl amino acids and hydroxy acids by capillary electrochromatography and mu-high performance liquid chromatography

A silica-based chiral monolithic column prepared by sol-gel process and chemical modification of chiral selector was used for enantioseparation of dansyl amino acids and hydroxy acids by capillary electrochromatography (CEC) and mu-high-performance liquid chromatography (mu-HPLC). L-Prolinamide was modified as a chiral selector. The chiral stationary phase (CSP), the chiral complex of Cu(II) with L-prolinamide, provides an anodic electroosmotic flow (EOF) in CEC. The EOF was found to be dependent on applied electric field strength, the pH, and the composition of mobile phases. Scanning electron micrograph showed that monolithic columns have the morphology of continuous skeleton and large through-pore. D-Enantiomers migrated before L-enantiomers except for dansyl-(Dns)-DL-Ser. The separation efficiencies of up to 17600 (D) and 13,200 plates m(-1) (L) were achieved for the separation of DL-indole-3-lactic acid.     

Rapid analysis of amino acids in Japanese green tea by microchip electrophoresis using plastic microchip and fluorescence detection

Microchip electrophoresis for the short-time analysis of amino acids in Japanese green tea was developed. The amino acids in Japanese green tea were derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F). The derivatives were filtered and directly analyzed by electrophoresis on a plastic microchip with a 31-mm long separation channel with fluorescence detection. Amino acid analysis of Japanese green tea was improved by removing polyphenols using a polyvinylpolypyrrolidone pretreatment. Elution profiles of NBD-amino acids were examined under different running buffer conditions, and the sodium dodecyl sulphate in the running buffer exhibited a dramatically high-separation efficiency of amino acids by inhibiting their adsorption on the channel walls. Under the optimized conditions (5 mM phosphate buffer (pH 5.5) containing 0.05 mM sodium dodecylsulfate as running buffer), the main amino acids contained in Japanese green tea were well separated within 2 min, and theanine (1475 mg/100 g tea leaf), Arg (408 mg/100 g tea leaf) and Gln (217 mg/100 g tea leaf) were detected in Japanese green tea.     

Enantioselective separation in capillary electrophoresis using a novel mono-6-propylammonium-β-cyclodextrin as chiral selector

The chiral resolving ability of a novel single-isomer cationic β-cyclodextrin (CD), mono-6^A-propylammonium-6^A-deoxy-β-cyclodextrin chloride (PrAMCD), as a chiral selector in capillary electrophoresis (CE) is reported in this work for the enantioseparation of hydroxy, carboxylic acids and amphoteric analytes. The effect of chiral selector concentration on the resolution was studied. Good resolutions were achieved for hydroxy acids. Optimum resolutions were obtained even at 3.5 mM CD concentration for carboxylic acids. The electrophoretic method showed good linearity and reproducibility in terms of migration times and peak areas, which should make it suitable for routine analysis. In addition, baseline chiral separation of a six-acid mixture was achieved within 20 min. PrAMCD proved to be an effective chiral selector for acidic analytes.     

Enantioseparation of dansyl amino acids by ligand‐exchange capillary electrophoresis with zinc(II)‐L‐phenylalaninamide complex

A novel method of chiral ligand‐exchange CE was developed with L ‐amino acylamides as a chiral ligand and zinc(II) as a central ion. It has been demonstrated that these chiral complexes, such as Zn(II)‐L ‐alaninamide, Zn(II)‐L ‐prolinamide, and Zn(II)‐L ‐phenylalaninamide, are suitable for use as chiral selectors for the enantioseparation of either individual pair of or mixed dansyl amino acids. The optimal separation running buffer consisted of 5 mM ammonium acetate, 100 mM boric acid, 4 mM ZnSO₄·7 H₂O, and 8 mM L ‐amino acylamides at pH 8.2. The experiments showed that apart from the effect of the concentration of the complexes on the resolution and the migration time, the buffer pH also had a sharp influence on resolution. The employed chiral ligands exhibited different enantioselectivities and enantiomer migration orders. D ‐Amino acids migrate faster than L ‐amino acids when Zn(II)‐L ‐alaninamide and Zn(II)‐L ‐phenylalaninamide are used as chiral selectors, but it was observed that the migration order is reversed when Zn(II)‐L ‐prolinamide is used as the chiral selector. Furthermore, the amount of dansylated amino acids is found to be highly dependent on the labeling temperature.     

Simultaneous stereoselective analysis of tramadol and its main phase I metabolites by on-line capillary zone electrophoresis-electrospray ionization mass spectrometry

On-line combination of partial filling capillary electrophoresis and electrospray ionization mass spectrometry was demonstrated for the simultaneous enantioseparation of tramadol and its main phase I metabolites. The partial filling technique was efficient at avoiding MS contamination by the chiral selector. Different experimental factors were investigated, including the chiral selector nature and concentration, plug length as well as the separation temperature. The best enantioseparation of the investigated compounds was achieved with a coated polyvinyl alcohol capillary and a 40 mM ammonium acetate buffer, pH 4.0, adding sulfobutyl ether beta-cyclodextrin (2.5 mg/ml) as the chiral selector. The charged cyclodextrin not only allowed enantioseparation of tramadol and its metabolites, but also improved the selectivity of compounds with the same molecular mass. Finally, CE-electrospray ionisation-MS was successfully applied to the stereoselective analysis of tramadol and its main metabolites in plasma after a simple liquid-liquid extraction.     

Direct chiral resolution of tartaric acid in food products by ligand exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector.

Chiral resolution of native DL-tartaric acid was performed by ligand-exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of tartaric acid were studied. The running conditions for optimum separation of tartaric acid were found to be 1 mM copper(II) sulfate-10 mM D-quinic acid (pH 5.0) with an effective voltage of -15 kV at 30 degrees C, using direct detection at 250 nm, and resolution of racemic tartaric acid was approximately 1.3. With this system, chiral resolution of DL-tartaric acid in food products was conducted successfully.     

A family of single-isomer positively charged cyclodextrins as chiral selectors for capillary electrophoresis: mono-6A-butylammonium-6A-deoxy-beta-cyclodextrin tosylate

A novel single-isomer positively charged beta-cyclodextrin (beta-CD), mono-6(A)-butylammonium-6(A)-deoxy-beta-cyclodextrin tosylate (BuAM-beta-CD), has been synthesized, characterized, and used for the enantioseparations of alpha-hydroxy acids, carboxylic acids, and ampholytic analytes by capillary electrophoresis in acidic aqueous background electrolytes. The effective mobilities of all studied analytes decreased with increasing concentration of CD. Satisfactory resolutions were obtained for alpha-hydroxy acids over a wide range of chiral selector concentration. The optimum CD concentration was lower than 5 mM for the carboxylic acids, while higher than 20 mM for alpha-hydroxy acids. Inclusion complexation in combination with ion pair interaction seemed to account for the chiral discrimination process. The hydrogen bonding may provide secondary contribution for the chiral resolution of alpha-hydroxy acids. In addition, BuAM-beta-CD was further proved to be an effective chiral selector for anionic analytes by the baseline enantioseparation of a six-acid mixture within 20 min.     

Assay of aromatic amino acid enantiomers in rice-brewed suspensions by chiral ligand-exchange CE

The aim of this work was to assay seasoning D- or L-aromatic amino acids (AAs) in rice-brewed suspensions, Laozao in Chinese, by chiral ligand-exchange CE with UV detection and Zn(II) complex as a chiral selecting system. Resolution and peak retention were found to be parallel to the basicity of the AA chiral ligands, and basic L-Arg was known to work the best at pH 8.20 compared with L-Lys and other AA ligands. Baseline separation of DL-aromatic AAs and partially separation of some FMOC-labeled nonaromatic AAs have been achieved using a running buffer of 5 mM ammonium acetate, 100 mM boric acid, 3 mM ZnSO(4), and 6 mM L-Arg at pH 8.20. The aromatic amino acids in four brands of Laozao were measured in a range of 0.25-20 microg/mL for Typ, 1.00-120 microg/mL for Phe, and 2.50-200 microg/mL for Tyr, with linear regression coefficient all over 0.999. The LOD (S/N=3) was 0.15 microg/mL for Typ, 0.50 microg/mL for Phe, and 1.25 microg/mL for Tyr. The recovery of the method determined by spiking with the supernates of Laozao as background was 94.0-112.9%. The RSDs of migration time and peak area measured from six injections of tyrosine were 0.2 and 2.7%, respectively, for run-to-run, and 1.6 and 3.2%, respectively for day-to-day. Interestingly, there were only L-Trp, D-Tyr, and L-Tyr found in the assayed four brands of Laozao. They may serve as an index to recognize the brand of Laozao.     

Mono‐6A‐(4‐methoxybutylamino)‐6A‐β‐cyclodextrin as a chiral selector for enantiomeric separation

A new member of the family of methoxylalkylamino monosubstituted β‐cyclodextrins, mono‐6^A‐(4‐methoxybutylamino)‐6^A‐β‐cyclodextrin, has been developed as a chiral selector for enantioseparation in capillary electrophoresis. This amino cyclodextrin exhibited good enantioselectivities for 16 model acidic racemates including three dansyl amino acids at an optimum pH of 6.0. Excellent chiral resolutions over six were obtained for α‐hydroxy acids and 2‐phenoxypropionic acids with 3.0 mM chiral selector. The good chiral recognition for α‐hydroxyl acids was attributed to inclusion complexation, electrostatic interactions, and hydrogen bonding. The hydrogen‐bonding‐enhanced chiral recognition was revealed by NMR spectroscopy. The chiral separation of acidic racemates was further improved with the addition of methanol (≤10 vol%) as an organic additive.     

Enantioseparation of hydroxy acids on easy-to-prepare continuous beds for capillary electrochromatography

This paper deals with the enantioseparation of hydroxy acids by ligand-exchange capillary electrochromatography. A chiral continuous bed was easily prepared by in situ polymerization of monomers, including an L-4-hydroxyproline derivative. This phase showed chiral recognition for several hydroxy acids, in addition to amino acids.     

l‐Lysine‐derived ionic liquids as chiral ligands of Zn(II) complexes used in ligand‐exchange CE

Amino acid ionic liquids (AAILs) with l ‐lysine (l ‐Lys) as anion were synthesized and applied as new chiral ligands in Zn(II) complexes for chiral ligand‐exchange CE. After effective optimization, baseline enantioseparation of seven pairs of dansylated amino acids was achieved with a buffer of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM ZnSO₄, and 6.0 mM [C₆mim][l ‐Lys] at pH 8.2. To validate the unique behavior of AAILs, a comparative study between the performance of Zn(II)‐l ‐Lys and Zn(II)‐[C₆mim][l ‐Lys] systems was conducted. In Zn(II)‐[C₆mim][l ‐Lys] system, it has been found that the improved chiral resolution could be obtained and the migration times of the three test samples were markedly prolonged. Then the separation mechanism was further discussed. The role of [C₆mim][l ‐Lys] indicated clearly that the synthesized AAILs could be used as chiral ligands and would have potential utilization in separation science in future.     

Simultaneous chiral resolution of monosaccharides as 8-aminonaphthalene-1,3,6-trisulfonate derivatives by ligand-exchange CE using borate as a central ion of the chiral selector

Six reducing monosaccharides (mannose, galactose, fucose, glucose, xylose, and arabinose) were derivatized with 8-aminonaphthalene-1,3,6-trisulfonate (ANTS). Based on the chiral ligand-exchange principle using borate as a central ion of the chiral selector and (S)-3-amino-1,2-propanediol (SAP) as a chiral selector ligand, all of the six ANTS-monosaccharides were simultaneously enantioseparated using absorbance at 245 nm for detection. The optimum conditions for both high resolution and moderately short migration time consisted of 200 mM SAP-200 mM borate buffer (pH 9.2) containing 10% ACN as a BGE at 30 degrees C with an applied voltage of +30 kV. It was revealed that the proposed chiral ligand-exchange CE using the SAP-borate system was applicable to enantioseparation of not only diols but also polyols.     

Synthesis and application of dehydroabietylisothiocyante as a new chiral derivatizing agent for the enantiomeric separation of chiral compounds by capillary electrophoretic

A new chiral derivatizing reagent, dehydroabietylisothiocyante (DHAIC), was synthesized and used for the enantiomeric separation of chiral compounds in capillary electrophoresis (CE). The synthetic route to obtain DHAIC is described. The separation conditions for the chiral separation of several chiral compounds, such as protein amino acids and chiral drug DOPA were optimized. Best results for the chiral separation of DHAIC derivatized amino acids and DOPA were obtained in a running buffer consisted of 50 mM borate (pH 9.5), 5 mM sodium dodecyl sulphate (SDS) and 20% acetonitrile for amino acids and 60 mM Na₂HPO₄ (pH 8.0), 17 mM SDS and 25% acetonitrile for DOPA. Under the conditions studied, chiral separation of five amino acids including Ser, Val, Ala, Thr, Cys and a chiral drug DOPA as their diastereomeric DHAIC derivatives has been achieved by micellar electrokinetic chromatography (MEKC).     

Enantioseparation of 3,4-dihydroxyphenylalanine and 2-hydrazino-2-methyl-3-(3,4-dihydroxyphenyl)propanoic acid by capillary electrophoresis using cyclodextrins

The enantiomeric separations of 3,4-dihydroxyphenylalanine (dopa) and 2-hydrazino-2-methyl-3-(3,4-dihydroxyphenyl)propanoic acid (carbidopa) by capillary electrophoresis were studied using several native, neutral and anionic cyclodextrins as chiral additives and uncoated fused-silica capillaries. The effect of the type and concentration of the cyclodextrin added to 20 mM phosphate buffer (pH 2.5) on enantioseparation and migration times was studied. A high resolution value of 15.63 was obtained for dopa enantiomers with a buffer containing 20 mM single isomer, heptakis(2,3-diacetyl-6-sulfato)-beta-cyclodextrin. The enantiomers of carbidopa were separated using 20 mM carboxymethyl-beta-cyclodextrin as a chiral resolving agent. Both methods allowed the determination of 0.1% of the D-enantiomer (second migrating) in the presence of the L-enantiomer (first migrating) of dopa and carbidopa with a good precision. These methods also gave good results in terms of precision for both peak area, migration time, linearity and accuracy.     

Preparation and evaluation of new Pirkle type chiral stationary phases with long alkyl chains for the separation of amino acid enantiomers derivatized with NBD-F.

In order to improve the high-performance liquid chromatographic separation of alpha-amino acids derivatized with the fluorogenic reagent 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) on commercially available chiral stationary phases (CSPs) such as SUMICHIRAL OA-2500(S) (CSP 1) and OA-4700 (CSP 3), the preparation of two new CSPs (CSP 2 and CSP 4) having 11-aminoundecanoic acid between the aminopropyl silica gel support and the chiral moiety in CSP 1 and CSP 3 is described. CSP 2 and CSP 4 improved both the mutual and enantiomeric separation of NBD-amino acids compared with CSP 1 and CSP 3. Thus, 17 pairs of NBD-amino acid enantiomers and NBD-glycine were separated on CSP 2 except for six NBD-amino acids (D-Asn, D-Ser, D-Gln, L-Pro, L-Ser and Gly). CSP 2 and CSP 4 also showed better enantiomeric separation of NBD-amino acid esters and amides than CSP 1 and CSP 3. It was considered that the achiral long alkyl chains in the CSPs might form a hydrophobic space which assisted the stereoselective interaction of analytes with the chiral moiety by changing the environment around the chiral moiety. On CSP 1 and CSP 2, NBD-beta-amino acid was also enantiomerically separated.     

A study of chiral recognition for NBD-derivatives on a Pirkle-type chiral stationary phase.

A chiral stationary phase (CSP 1) derived from an (S)-N-3,5-dinitrobenzoyl-1-naphthylglycine showed excellent enantiomeric separation for amino acid derivatives with a fluorogenic reagent, 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), in high-performance liquid chromatography (HPLC). We compared elution profiles (separation factor and elution order) of NBD-amino acids and their analogs on HPLC, to determine the diastereomeric complex between the chiral moiety of CSP 1 and NBD-amino acid, which is responsible for the chiral recognition. (1)H-NMR studies of a mixture of model compound of CSP 1 and NBD-Ala suggest that the diastereomeric complex is composed of two hydrogen bonding sites at the amino proton and oxygen atom, and a pi-pi interaction by the benzofurazan structure (2,1,3-benzoxadiazole) of NBD-amino acid. Furthermore CSP 1 was able to separate esters, amides and alpha-methyl amino acids derivatized with NBD-F.