Synthesis of endo,exo-7,8,9,10-tetrachlorobicyclo[4.4.0]deca-7,9-diene-3,4-dicarboxylic acid N,N′-bisimides

A one-stage synthesis was developed of N,N′-(3,3′-dimethoxy-4,4′-diphenylmethane)- and N,N′-(1,2-ethane)-endo,exo-7,8,9,10-tetrachlorobicyclo[4.4.0]deca-7,9-diene-3,4-dicarboxylic acids bisimides by reaction of a bisadduct of 1,8,9,10,11,11-hexachlorotricyclo[6.2.1.0^5,10]-undec-9-ene-4,5-dicarboxylic acid N,N′-R-bisimide with pyridine in DMF. The spatial structure of compounds obtained was established.     

A novel HMP-2 dye of high extinction coefficient designed for enhancing the performance of ZnO platelets

Newly designed cis-[Ru(H₂dcbpy) (L) (NCS)₂ (HMP-2), where L is 4-(4-(N,N-di-(p-hexyloxyphenyl)-amino)styryl)-4′-methyl-2,2′-bipyridine, sensitizing dye of high extinction coefficient than the routinely preferred ruthenium (II) cis-di(thiocyanato)bis(2,2′-bipyridyl-4,4′-dicarboxylic acid) (N3) sensitizing dye is explored. Electrochemically synthesized ZnO (plates of 4–5 μm in height and 100–150 nm in width) electrodes are dipped intentionally in N3 and HMP-2 dyes for 20 h so as to observe large surface agglomeration effect for ZnO/N3 system. Due to the local inhomogeneity resulting from the Zn²⁺/dye complex layer formed between ZnO platelets and N3 dye, its solar-to-electrical conversion efficiency is inferior than aggregation-free ZnO/HMP-2.     

A new intramolecular cyclisation reaction—I : Novel synthesis of benzo(k,1)thioxanthene-3,4-dicarboxylic anhydride and derived dyestuffs

A new direct synthesis of benzo(k,1)thioxanthene-3,4-dicarboxylic anhydride from 4-nitro-naphthalene-1,8-dicarboxylic anhydride and 2-aminobenzenethiol is reported; 4-(2-aminophenylthio) naphthalene-1,8-dicarboxylic anhydride and 4-phenylthionaphthalene-1,8-dicarboxylic anhydride are also formed. Similar reaction in presence of amyl nitrite or sodium nitrite results in formation of larger amounts of 4-phenylthionaphthalene-1,8-dicarboxylic anhydride, together with other products arising from the oxidation of 2-aminobenzenethiol; one such product is the new heterocycle 9,10-dithiaphenanthrene. 4-(2-Aminophenylthio)-naphthalene-1,8-dicarboxylic anhydride is rapidly converted by amyl nitrite or sodium nitrite in dimethylformamide into benzo(k,1)thioxanthene-3,4-dicarboxylic anhydride, constituting a novel one-stage intramolecular cyclisation reaction of greater convenience than the conventional two stage Pschorr cyclisation.     

Photodynamic efficiency of porphyrins encapsulated in polysilsesquioxanes

Mesoporous organosilica-porphyrin composites were obtained by entrapment of 5,10,15,20-tetraphenylporphyrin (TPP) and 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrin (TMPyP) into three polysilsesquioxanes prepared by the sol-gel method from 1,2-bis(triethoxysilyl)ethane, 1,6-bis(triethoxysilyl)hexane, and 1,8-bis(triethoxysilyl)octane. The materials were characterised by their texture and optical properties (fluorescence and absorbance) and by light-induced antimicrobial activity against E. coli BL21(DE3) (pET16bDsRed) strain.     

Étude de la complexation des lanthanides trivalents par les six isomères de l'acide diaminocyclohexane-tétraacétique : Partie 3. Relation entre les Constantes d'Acidité et la Structure Moleculaire des Chélatants

(Study of the complexation of trivalent lanthanides by the six isomers of diaminocyclohexanetetraacetic acid. Part 3. Relationship between the acidity constants and the molecular structure of the ligands.)Potentiometric measurements of the acidity constants of the six isomers of diaminocyclohexane-N,N,N′,N′-tetraacetic acid (DCTA) are reported for an ionic strength of 1 mol l^?1 (KCl) at 25°C. The values of the two constants K_a3 and K_a4 are correlated with the maximum N—N distance for each ligand. Ethylenediamine-N,N,N′,N′-tetraacetic acid (EDTA) and some homologous ligands, including specially synthesized, 1,8-diaminooctane-N,N,N′,N′-tetraacetic acid and 1,10-diaminodecane-N,N,N′,N′-tetraacetic acid, are studied under the same conditions. It is proved that there is a relationship between the molecular structure and the affinity for protons.     

Post-treatment and characterization of novel luminescent hybrid bimodal mesoporous silicas

A novel luminescent hybrid bimodal mesoporous silicas (LHBMS) were synthesized via grafting 1,8-Naphthalic anhydride into the pore channels of bimodal mesoporous silicas (BMMs) for the first time. The resulting samples were characterized by powder X-ray diffraction (XRD), N₂ adsorption/desorption measurement, Fourier transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, and Photoluminescence spectroscopy (PL). The results show that 1,8-Naphthalic anhydride organic groups have been successfully introduced into the mesopores of the BMMs and the hybrid silicas are of bimodal mesoporous structure with the ordered small mesopores of around 3 nm and the large mesopores of uniform intra-nanoparticle. The excellent photoluminescent performance of LHBMS has a blue shift compared to that of 2-[3-(triethoxysilyl) propyl-1 H-Benz [de]isoquinoline-1, 3(2 H)-dione, suggesting the existence of the quantum confinement effectiveness.     

Novel polybenzoxazinones with tricyclic fused-rings

A series of polybenzoxazinones containing phenoxathiin and phenoxaphosphine units were prepared from tricyclic diacid chlorides and 4,4′-diaminobiphenyl-3,3′-dicarboxylic acid and 4,4′-diamino-3,3′-diphenylmethane dicarboxylic acid. The low temperature solution polymerization technique afforded polyamic acid which subsequently underwent cyclization along the polymer chain in a solvent mixture of refluxing N,N′-dimethylacetamide, acetic anhydride, and pyridine to give polybenzoxazinones in moderate yields. The polymers thus obtained had inherent viscosities in the range of 0.15–0.23 dL/g, were sparingly soluble in N-methyl-2-pyrrolidone, and were found to be thermally more stable than the corresponding open-chain polymer with diphenylether linkage.     

Synthesis, photochemical stability and photo-stabilizing efficiency of probes based on benzothioxanthene chromophore and Hindered Amine Stabilizer

New types of combined chromophore-HAS (Hindered Amine Stabilizer) fluorescence probes were prepared and their photo-stability as well as their photo-stabilizing efficiency was tested in polypropylene film. The chromophore was benzothioxanthene and HAS was 2,2,6,6-tetramethylpiperidine. They were prepared by a one-step synthesis from benzothioxanthene-3,4-dicarboxylic anhydride (BTXA) by condensation with 4-amino-2,2,6,6-tetramethylpiperidine to obtain the probe in the form of parent amine (BTXI-NH) and 4-amino-1-oxy-2,2,6,6-tetramethylpiperidine in the case of stable nitroxyl radical form (BTXI-NO). Kinetics of BTXA photo-decomposition followed by UV spectroscopy were similar to kinetics of photo-decomposition for derivatives with covalently linked HAS i.e. BTXI-NH and BTXI-NO. It consists of two parts, slower in the beginning and very fast at the end of the process. Better stability of BTXI-NO in comparison with BTXI-NH can be explained by the presence of stable nitroxyl radical in its structure. The rate of decomposition of the fast part is similar for both additives. As soon as the decomposition starts there is no influence of NO or NH on this process. Times represented the start of the fast decomposition of probes correspond to the induction period of photo-oxidation of PP films. Possible effect of mutual interaction of chromophore and HAS coupled in one molecule (BTXI-NH or BTXI-NO) during photo-oxidation was followed by comparison with the course of photo-oxidation of PP film containing physical mixture of chromophore in the form of BTXA and HAS in the form of parent amine (4-hydroxy-2,2,6,6-tetramethylpiperidine) and stable nitroxyl radical (4-hydroxy-2,2,6,6-tetramethylpiperidin-N-oxyl).     

Two 1,8-naphthalimide-based proton-receptor fluorescent probes for pH determination

Two newly synthesised 1,8-naphthalimide-based proton-receptor fluorescent probes N-allyl-4-(4’-N,N-diethylpropionamide-acetamido-piperazinyl)-1,8-naphthalimide I and N-(N,N-dibenzylpro- pionamide-acetamido)-4-allyl-1-piperazinyl-1,8-naphthalimide II were synthesised to monitor the change in pH in such a way that the presence of protons can increase the fluorescence intensity of these compounds. Unlike most of the other pH-sensitive probes reported, the probes possess the obvious advantage of being able to detect stronger acids at pH ≈ 2 and a combination of the two probes could detect a wider pH scale from 1.98 to 6.59; this should be very useful for monitoring the pH of the environment.     

Synthesis of <Emphasis Type="Italic">endo,exo</Emphasis>-1,2,3,4,11,11-hexachlorotricyclo[6.2.1.05,10]-undec-2-en-7,8-dicarboxylic acid <Emphasis Type="Italic">N</Emphasis>-(2,4,6-tribromophenyl)imide

Apreparation method was developed for endo,exo-1,2,3,4,11,11-hexachlorotricyclo-[6.2.1.0^5,10]undec-2-ene-7,8-dicarboxylic acid N-tribromophenylimide by acylation of 2,4,6-tribromoaniline with this acid anhydride. The structure of imide obtained was proved by IR spectrum, TLC method, and by independent synthesis.     

Synthesis, transport, and ionophore properties of α,ω-biphosphorylated azapodands: VIII. Solvent extraction of the metal ions with N,N′-bis(dioctylphosphorylmethyl)-1,8-diamino-3,6-dioxaoctane

Liquid extraction from the aqueous solutions of perchloric acid with neutral azapodand extractant N,N′-bis(dioctylphosphorylmethyl)-1,8-diamino-3,6-dioxaoctane has been highly efficient in the cases of uranyl ions and some metals of groups II and III. To estimate the synergic effect of organophosphorus extractants, the neutral extractant was applied in the mixture with an acidic component, bis(pentadecyl)phosphoric acid. The synergic effect has exclusively been observed in the extraction of zinc and cadmium ions.     

N21,N22‐carbonyl‐bridged biliverdin. red‐blue color change effected by conformation

An N₂₁,N₂₂‐carbonyl‐bridged mesobiliverdin, prepared in high yield by reaction of the unbridged parent (λ_max 639 nm, ? 15,700, chloroform) with 1,1′‐carbonyldiimidazole and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene, gave magenta‐colored solutions in chloroform that absorb strongly in the visible spectrum (λ_max 534 nm, ? 27,700) and shifted to bright blue (λ_max 669 nm, ? 35,300) upon addition of trifluoroacetic acid.     

Synthesis and fluorescence properties of naphthalimide-containing Tröger’s bases

Tröger’s bases based on the naphthalimide fluorophore have been prepared from N-alkyl-4-amino-1,8-naphthalimides. The fluorescence emission intensity of these dyes is highly medium dependent. In cyclohexane, these dyes emit near 440 nm with high quantum yields; addition of cosolvents reduces the fluorescence intensity near 440 nm and leads to increased fluorescence intensity around 480 nm.     

N-Amino-1,8-Naphthalimide is a Regenerated Protecting Group for Selective Synthesis of Mono-N-Substituted Hydrazines and Hydrazides

A new route to synthesis of various mono-N-substituted hydrazines and hydrazides by involving in a new C−N bond formation by using N-amino-1,8-naphthalimide as a regenerated precursor was invented. Aniline and phenylhydrazines are reproduced upon reacting these individually with 1,8-naphthalic anhydride followed by hydrazinolysis. The practicality and simplicity of this C−N dihalo alkanes; developed a synthon for bond formation protocol was exemplified to various hydrazines and hydrazides. N-amino-1,8-naphthalimide is suitable synthon for transformation for selective formation of mono-substituted hydrazine and hydrazide derivatives. Those are selective mono - amidation of hydrazine with acid halides; mono-N-substituted hydrazones from aldehydes; synthesis of N-aminoazacycloalkanes from acetohydrazide scaffold and inserted to hydroxy derivatives; distinct synthesis of N,N-dibenzylhydrazines and N-benzylhydrazines from benzyl halides; synthesis of N-amino-amino acids from α-halo esters. Ecofriendly reagent N-amino-1,8-naphthalimide was regenerated with good yields by the hydrazinolysis in all procedures.     

The applications of near-infrared Fourier transform Raman spectroscopy to the analysis of polymorphic forms of cimetidine

Fourier transform (FT)-Raman spectroscopy, utilizing a near-infrared (Nd:YAG laser, at 1.064 μm) source was used to characterise the three anhydrous polymorphic forms A, B and C of the drug cimetidine (N″-cyano-N-methyl-N′ -[2-[(5-methyl-1H-imidazol-4-yl) methylthio]ethyl]guanidine). The FT-Raman spectra were free from fluorescence interference and had good signal-to-noise ratios. Each polymorph has a distinct spectrum, characterised by two regions, 1250-1050 cm⁻¹ and 1500-1350 cm⁻¹. This work demonstrates that it is possible to use FT-Raman spectroscopy to differentiate between polymorphic forms of the same compound.     

Practical synthesis of perylene-monoimide building blocks that possess features appropriate for use in porphyrin-based light-harvesting arrays

Perylene-monoimide dyes with solubilizing aryloxy substituents at the perylene perimeter and a synthetic handle on the N-aryl group are valuable building blocks for incorporation as accessory pigments in porphyrin-based light-harvesting arrays. A family of such dyes has been prepared by reaction of 1,6,9-tris(4-tert-butylphenoxy)perylene-3,4-dicarboxylic anhydride with a set of 4-iodo/ethynyl anilines (with or without 2,6-diisopropyl substituents) in the presence of Zn(OAc)₂·2H₂O in imidazole/mesitylene at 130°C. The workup procedures throughout the synthesis have been streamlined for scale-up purposes, minimizing chromatography. Two bis(perylene)porphyrin building blocks were prepared in a rational manner and examined in Sonogashira and Glaser polymerizations. The two isopropyl groups on the N-aryl group and the three 4-tert-butylphenoxy groups at the perylene perimeter are essential for high solubility of the bis(perylene)porphyrins and corresponding oligomers in organic solvents.     

Poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide) and N,N,N′,N′- tetrabromobenzene-1,3-disulfonamide as effective catalysts for conversion of aldehydes to 1,1-diacetates and acetals

Poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide) [PBBS] and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide [TBBDA] are effective catalysts for easy preparation of 1,1-diacetates from aldehydes and acetic anhydride, and for easy preparation of acetals using diols under microwave irradiation in the presence of SiO₂.     

Pyrolysis of cyclo-aromatic diesters

Studies on the pyrolysis of cyclo-aromatic diesters derivatives of 3-phenylprop-2-en-1-ol are presented. The diesters are obtained during catalyzed esterification process of a stoichiometric ratio of 3-phenylprop-2-en-1-ol with suitable cycloaliphatic or aromatic acid anhydride in the solvent-free medium. As an acid anhydrides cyclohexane-1,2-dicarboxylic anhydride, cis-4-cyclohexene-1,2-dicarboxylic anhydride, bicyclo[2.2.1]-5-heptene-2,3-dicarboxylic anhydride, and phthalic anhydride were applied. The thermal properties of obtained compounds under inert atmosphere were tested by means of differential scanning calorimetry and thermogravimetry coupled with FTIR analysis. The pyrolysis products were determined and the probable mechanism of their decomposition was proposed.     

New green fluorescent polymer sensors for metal cations and protons

A new 4-(N-methylpiperazine)-N-allyl-1,8-naphthalimide with intense yellow-green fluorescence has been synthesized. Then it has been copolymerized with styrene and methylmetacrylate. The photophysical characteristics of the fluorescent dye and its copolymers (poly(St-co-NI) and poly(MAA-co-NI)) have been determined viewing their sensor properties for protons and transition metal cations (Cu²⁺, Fe³⁺ and Zn²⁺). Fluorescence enhancement is the photophysical response of the 4-(N-methylpiperazine)-N-allyl-1,8-naphthalimide to the presence of metal cations and protons, while fluorescence quenching is observed for both copolymers.     

Synthesis and characterisation of rubbing-resistant polyimides with naphthalimide side-chain for liquid-crystal alignment layers

A novel diamine with a side-chain containing naphthalimide ring and non-polar alkyl end group, N-octyl-4-(3,5-dinitrobenzoyl)-amido-1,8-naphthalimide (N8), was synthesised and its chemical structure was confirmed by FTIR (fourier transform infrared) spectroscopy and nuclear magnetic resonance spectroscopy (¹H-NMR). Then, a new family of polyimides (PIs) containing naphthalimide unit in the side-chains has been successfully synthesised by reaction of 4,4′-oxydiphthalic anhydride (ODPA) and 3,3′-dimethyl-4,4′-methylenediamine (DMMDA) with the novel functional diamine N8. The obtained polymers showed excellent solubility in a broad range of solvents, including tetrahydrofuran. Thermal properties of polymers were good enough to permit the use of these PIs on liquid-crystal displays (LCDs) applications. Alignment films obtained by casting offered outstanding rubbing-resistant ability, meanwhile kept the pretilt angle high above 89°. The PI seems to be prospective materials for alignment layers in LCDs.