Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Synthesis,structure, and optical and photocatalytic properties of quasi-one-dimensional ZnO doped with Со<Subscript>3</Subscript>O<Subscript>4</Subscript> and carbon

One-dimensional nanocomposites Zn_1–x Co _x O_1–y С _у :nCo₃O₄ and solid solutions Zn_1–x Co _x O_1–y С _у , which are promising photocatalysts for the oxidation of toxic organic compounds in visible light, are obtained via the thermolysis of Zn_1–x Co _x (HCOO)(OCH₂CH₂O)_1/2 (0.1 ≤ x ≤ 0.5) precursor in a controlled gaseous atmosphere.     

Structure,stability, and thermomechanical properties of Ca-substituted Pr<Subscript>2</Subscript>NiO<Subscript>4 + δ</Subscript>

Ca-substituted layered nickelates with a general Pr_2–x Ca _x NiO_{4 + δ} composition (x = 0–0.7, Δx = 0.1) were prepared in the present work and their structural and physic-chemical properties were investigated in order to select the most optimal materials, which can be used as cathodes for solid oxide fuel cells. With an increase in Ca content in Pr_2–x Ca _x NiO_{4 + δ} the following tendencies were observed: (i) a decrease in the concentration of nonstoichiometric oxygen (δ), (ii) a decrease in the unit cell parameters and volume, (iii) stabilization of the tetragonal structure, (iv) a decrease of the thermal expansion coefficients, and (v) enchancement of thermodynamic stability and compatibility with selected oxygen- and proton-conducting electrolytes. The Pr_1.9Ca_0.1NiO_{4 + δ} material, having highest δ value, departs from the general “properties–composition” dependences ascertained. This indicates that oxygen non-stoichiometry has determining influence on the functional properties of layered nickelates.     

Co-substitution effect on the structural,electrical, and electrochemical properties of nanostructured Co<Subscript>x</Subscript>Ni<Subscript>1-x</Subscript>MnP<Subscript>2</Subscript>O<Subscript>7</Subscript> (x = 0, 0.25, 0.5, and 0.75)

Cobalt-nickel-manganese pyrophosphate nanostructures with formula Co_xNi_1-xMnP₂O₇ were prepared via the hydrothermal method at 150 °C, with further calcinations at 500 °C. A structural analysis of Co_xNi_1-xMnP₂O₇ samples was carried out using X-ray diffraction (XRD). The effect of Co substitution on the structural, electrical, and electrochemical properties of Co_xNi_1-xMnP₂O₇ is reported. The electrochemical results show that the specific capacity increases from 59 to 205 mAh/g with increasing Co content. This study demonstrates the Co substitution effect on the mixed electrical conductivity. The temperature dependence of the dc electrical conductivity, for both pure and Co²⁺-doped samples, obeys the Arrhenius law. The frequency dependence of ac conductivity for the materials exhibited a Jonscher’s universal power law. The plots of pre-exponent (n) versus temperature suggested that the conduction mechanism can be described using correlated barrier hopping model. The improved electrical conductivity and electrochemical proprieties of Co_xNi_1-xMnP₂O₇ nanomaterials could be ascribed to the synergistic effect of nickel and cobalt ions. The best results have been obtained for the composition x(Co) = 0.75, where the electrical conductivity is maximum, and the Co_0.75Ni_0.25MnP₂O₇ demonstrates the highest specific capacity, implying their promising potential applications in the energy storage.     

Investigation on the effects of addition of SiO<Subscript>2</Subscript> nanoparticles on ionic conductivity,FTIR, and thermal properties of nanocomposite PMMA–LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>

Composite polymer electrolyte systems composed of poly(methyl methacrylate) (PMMA) as the host polymer, lithium trifluoromethanesulphonate (also known as lithium triflate; LiCF₃SO₃) as dopant salt, and a variety of different concentrations of nano-sized fumed silica (SiO₂) as inorganic filler were studied. The effect upon addition of SiO₂ on the ionic conductivity of the composite polymer electrolytes was investigated, and it was proven that the ionic conductivity had been enhanced. In addition, the interfacial stability also showed improvement. Maximum conductivity was obtained upon addition of 2 wt.% SiO₂. The complexation of PMMA and LiCF₃SO₃ was verified through Fourier transform infrared studies. The thermal stability of the polymer electrolytes was also found to improve after dispersion of inorganic filler. This was proven in the thermogravimetric studies.     

Structure,Ferroelectric, and Magnetoelectric Properties of Bulk PZT–NiFe<Subscript>1.9</Subscript>Co<Subscript>0.02</Subscript>О<Subscript>4 – δ</Subscript> Composites

The phase composition, microstructure, and dielectric, ferroelectric, magnetic, and magnetoelectric properties of bulk ceramic (1 – x)PZT–xNiFe_1.9Co_0.02О_{4 – δ} composites with 3–0 connectivity have been studied. Using X-ray diffraction and electron microscopy, it has been established that the ferrimagnetic (spinel- like) and ferroelectric (tetragonal perovskite-like) phases separately exist in the composites of all compositions. The simultaneous existence of ferroelectric and ferrimagnetic properties in the composites is confirmed by measuring their P(E) and σ(B) hysteresis loops and studying the temperature dependences of dielectric and magnetic properties. The synthesized composites have high magnetoelectric characteristics: their voltage coefficient at x = 0.4 is 215 mV/A at a frequency of 1 kHz and 130 V/A at an electromechanical resonance frequency of 380 kHz.     

Preparation and characterization of LiNi<Subscript>0.495</Subscript>M<Subscript>0.01</Subscript>Mn<Subscript>0.495</Subscript>O<Subscript>2</Subscript> (M = Zn,Co, and Y) for lithium ion batteries

Layered structured LiNi_0.5Mn_0.5O₂ and LiNi_0.495M_0.01Mn_0.495O₂ (M = Zn, Co, and Y) compounds were prepared by PVP (poly(vinyl pyrrolidone))-assisted sol-gel method, and their structural, morphological, vibrational, transport, and electrochemical properties were characterized by XRD, SEM, FTIR, Raman, AC impedance, and galvanostatic charge and discharge analysis. XRD patterns reveal that doping does not change the crystal structure of the LiNi_0.5Mn_0.5O₂ compound. SEM images show that the average size of the particle is in sub-micron ranges. The AC impedance studies shows an electrical conductivity of ～2.5 × 10^?7 S/cm for the parent compound. The introduction of Zn/Co/Y at equivalent sites increased the electrical conductivity by one order ～10^?6 S/cm. The compound LiNi_0.495Co_0.01Mn_0.495O₂ shows the highest electrical conductivity of 2.85 × 10^?6 S/cm and delivers a specific discharge capacity of 110 mAh/g at the end of the 25th cycle in the voltage window of 2.5–4.4 V for a current density of 30 mA/g.     

Structural and magnetic properties of Fe<Subscript>m</Subscript>Y<Subscript>n</Subscript> (m + n = 7, Y = Ru,Rh, Pd,and Pt) nanoalloys

The structural and magnetic properties of the small binary clusters Fe _m Y _n (with m + n = 7, Y = Ru, Rh, Pd, Pt) were studied through extensive ab initio calculations, by means of the fully unconstrained version of the density-functional method, as implemented in the SIESTA code, within the generalized gradient approximation. The lowest energy state geometries, the chemical ordering, and the electronic and the magnetic structures were calculated. We found that the lowest energy geometrical structures for the pure Ru, Rh, Pd, Pt, and Fe heptamers, are a cube without an apex, a triangular prism capped on a square face, a decahedron, a side capped double square, and a decahedron, respectively. Starting from these geometries of the pure element heptamers, we followed the changes in the geometric structure as a function of the chemical composition. We analyzed all the different chemical arrangements, which depend on the particular geometry, and magnetic moment orientations, in the whole range of compositions. In general, there are important modifications to the magnetic moment of the Y atoms as soon as one of them is substituted by an Fe atom in the cluster. In contrast, under the same circumstances, the Fe magnetic moment takes values larger than 3 μ _B and keeps almost this value, insensitive to the structure, composition and chemical order of the system.     

Structural and magnetoelectric properties of MFe<Subscript>2</Subscript>O<Subscript>4</Subscript>–PZT (M = Ni,Co) and La<Subscript>x</Subscript>(Ca,Sr)<Subscript>1-x</Subscript>MnO<Subscript>3</Subscript>–PZT multilayer composites

Thick-film layered magnetoelectric composites consisting of ferromagnetic and ferroelectric phases have been synthesized with nickel ferrite (NFO), cobalt ferrite, La_0.7Sr_0.3MnO₃ (LSMO), or La_0.7Ca_0.3MnO₃ (LCMO) and lead zirconate titanate (PZT). Structural, magnetic, and ferromagnetic resonance characterization shows evidence for defect-free ferrites, but deterioration of manganite parameters. The resistivity and dielectric constants are smaller than expected values. The magnetoelectric effect (ME) is stronger in ferrite–PZT than in manganite–PZT. The ME voltage coefficient _E at room temperature is the highest in NFO–PZT and the smallest for LCMO–PZT. The transverse ME effect is an order of magnitude stronger than the longitudinal effect. The magnitude of _E correlates well with magnetic permeability for the ferrites. PACS 75.80.+q; 75.70.Gg; 75.60.-d     

Preparation,structure and properties of La<Subscript>0.67</Subscript>Pb<Subscript>0.33</Subscript>(Mn<Subscript>1-x</Subscript>Co<Subscript>x</Subscript>)O<Subscript>3-δ</Subscript>

La_0.67Pb_0.33(Mn_1-xCo_x)O_3-δ ceramics with x=0, 0.01, 0.03, 0.06, 0.1 and 0.15 have been prepared in a two-step procedure. Precursor gels were made by the wet chemical malic acid method. The gels were calcined and then converted into ceramics by heat treatment at 950 °C and 1000 °C in air. X-ray diffraction showed that the compounds were phase pure. The crystal structure symmetry of the compounds was confirmed to be rhombohedral (space group R3̄c) for the whole investigated range of x. All compounds undergo a paramagnetic–ferromagnetic phase transition between 335 K and 225 K. The basic magnetic characteristics such as the Curie temperature , the paramagnetic Curie temperature θ, the effective magnetic moment and the saturated magnetization decrease with increasing Co doping. The ferromagnetic transition is accompanied by an anomaly in the electrical resistance for all compounds. The high-temperature insulator–metal transitions () do not coincide with the relevant . A large magnetoresistance peak of about 15% was observed for all compounds at . PACS 72.80.Ga; 75.47.Lx; 75.60.Ej     

Peculiarities of the magnetic,galvanomagnetic, elastic,and magnetoelastic properties of Sm<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript>x</Subscript>MnO<Subscript>3</Subscript> manganites

Manganites of the Sm1?xSr_xMnO₃ system (x=0.33, 0.4, and 0.45) possess giant negative values of the magnetoresistance Δρ/ρ and the volume magnetostriction ω near the Curie temperature T_C. In the compound with x=0.33, the isotherms of Δρ/ρ, ω, and magnetization σ exhibit smooth variation and do not reach saturation up to maximum magnetic field strengths (120 kOe) studied (according to the neutron diffraction data, this substance comprises a ferromagnetic (FM) matrix with distributed clusters of a layered antiferromagnetic (AFM) structure of the A type). In the compounds with x=0.4 and 0.45 containing, besides the FM matrix and A-type AFM phase, a charge-ordered AFM phase of the CE type (thermally stable to higher temperatures as compared to the A-type AFM and the FM phases), the same isotherms measured at T ≥ T_C show a jumplike increase in the interval of field strengths between H_c1 and H_c2 and then reach saturation. In the interval H_c1 > H > H_c2, the σ, ω, and Δρ/ρ values exhibit a metastable behavior. At temperatures above T_C, the anisotropic magnetostriction changes sign, which is indicative of rearrangements in the crystal structure. The giant values of ω and Δρ/ρ observed at T ≥ T_C for all compounds, together with excess (relative to the linear) thermal expansion and a maximum on the ρ(T) curve, are explained by the phenomenon of electron phase separation caused by a strong s-d exchange. The giant values of magnetoresistance and volume magnetostriction (with ω reaching ～10^?3) are attributed to an increase in the volume of the FM phase induced by the applied magnetic field. In the compound with x=0.33, this increase proceeds smoothly as the FM phase grows through the FM layers in the A-type AFM phase. In the compounds with x=0.4 and 0.45, the FM phase volume increases at the expense of the charge-ordered CE-type AFM structure (in which spins of the neighboring manganese ions possess an AFM order). The jumps observed on the σ(H) curves, whereby the magnetization σ reaches ～70% of the value at T=1.5 K, are indicative of a threshold character of the charge-ordered phase transition to the FM state. Thus, the giant values of ω and Δρ/ρ are inherent in the FM state, appearing as a result of the magnetic-field-induced transition of the charge-ordered phase to the FM state, rather than being caused by melting of this phase.     

Effect of mechanical activation on the phase composition,structure, and polymorphism of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O6 + δ oxide

The mechanical activation of YBa₂Cu₃O_6+δ powders is studied comprehensively using thermal analysis, scanning electron microscopy, high-temperature x-ray diffraction, and x-ray photoelectron spectroscopy. It is shown that the size of the coherent scattering regions is substantially reduced by intensive grinding (from 83 to 17 nm) and the material transforms to a nanostructured state. An increase in the reactivity of the material is found, which shows up as an enhanced accumulation of intercalated water in its structure. At the same time, no significant increase in the volume of impurity phases in the powder or in the influence of impurities on the crystal lattice parameters was observed. High-temperature x-ray studies of the lattice parameters of the YBa₂Cu₃O_6+δ phase reveal a jump (at temperatures of 430–630°C) and a decrease (above 630°C) in the parameter c when the powder is mechanically activated. A significant reduction in the temperature of the transition from the orthorhombic to the tetragonal structural modification is observed. These effects are explained by a change in the charge states of oxygen ions belonging to the base plane of the YBa₂Cu₃O_6+δ oxide during mechanical activation.     

Features of the structure and properties of β-FeSi<Subscript>2</Subscript> nanofilms and a β-FeSi<Subscript>2</Subscript>/Si interface

The electronic, geometric, and magnetic structure of nanofilms of the β phase of iron disilicide FeSi₂ with the (001), (100), and (010) surfaces have been simulated through density functional calculations. A substantial reconstruction of the (001) surface terminated with silicon atoms has been observed, which was accompanied by an increase in the surface symmetry and appearance of “squares” of silicon atoms. Analysis of the electron density of states (DOS) and spin DOS projected on the contributions of layers of atoms (LSDOS) indicates that all plates have metallic properties. The main contribution near the Fermi level comes from the surface iron layers and it decreases rapidly with an increase in the distance from the surface of the plate. Analysis of the calculated effective magnetic moments of atoms shows that the surface layers in the plates have a significant magnetic moment, in particular, iron layers on the (001) surface (1.89 μ_B/atom). The moments of atoms decrease rapidly with an increase in their distance from the surface. The electron and geometric regions of a (001)Si/FeSi₂ interface have been studied. Analysis of the LSDOS shows that the surface conducting state mainly determined by the contribution from the near-surface silicide layers is implemented in this region. The possibility of the formation of the perfect and sharp Si/FeSi₂ interface has been demonstrated.     

Superconducting Phase Diagram of the Yttrium,Barium, and YBa-core in YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7–δ</Subscript> by an Ising Model

We investigate the temperature dependent of magnetizations, hysteresis properties and present the superconducting phase diagrams of the YBa₂Cu₃O_7–δ (YBCO) by an Ising model within the effective-field theory. We obtain the magnetizations of the YBCO and its components (Cu1, Cu2, O1, O2, O3, O4, Ba, Y, CuO-shell, YBa-core, and total YBCO) versus the reduced temperature and external magnetic field. We find that the copper atoms have two different magnetizations (Cu1 and Cu2) and oxygen atoms have four different magnetizations (O1, O2, O3, O4) but yttrium and barium has one magnetization. The differences in the magnetizations of the copper and oxygen atoms result from the lattice location of them on the YBCO lattice. The magnetization of the Cu1 atoms is the lowest and the yttrium is highest than those of the others; hence magnetizations of the YBCO increase from the corner to inner of the orthorhombic YBCO lattice. We also find that the YBa-core, yttrium and barium atoms of the YBCO exhibit superconductivity behaviors. Therefore, Y–Ba core, yttrium and barium atoms have the superconducting phase diagram and it has Meissner, vortex, and normal states. It is also found that the upper critical coercive field (H_c2) and the critical vortex temperature (T_v) of the Ba are high than those of the Y and YBa-core.     

Magnetoinduced structural,Jahn–Teller,dielectric, and transport effects in La<Subscript>0.875</Subscript>Sr<Subscript>0.125</Subscript>MnO<Subscript>3</Subscript>

The temperature and magnetic field dependences of elastic moduli and resistance are studied in a La_0.875Sr_0.125MnO₃ single crystal. In addition to the metal–insulator transition, the structural transition from the cooperative J–T strongly distorted orthorhombic phase to the charge ordering phase is studied at T _J–T = 150 K in magnetic fields of up to 2 T. Results show it is possible to control the acoustic parameters in the vicinity of T _J–T via magnetic fields.     

Synthesis and characterization of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>–Ba<Subscript>0.9</Subscript>Sr<Subscript>0.1</Subscript>TiO<Subscript>3</Subscript> magnetoelectric composites with dielectric and magnetic properties

Composite structures consisting of (001)-oriented SrTiO₃ (STO)/La_0.7Sr_0.3MnO₃ (LSMO) films of 30 nm thickness, grown on an (001) Pb(Mg_1/3Nb_2/3)TiO₃– 28 mol.% PbTiO₃ piezoelectric relaxor-ferroelectric single-crystalline wafer were investigated by means of Wide-Angle X-ray Diffraction (WAXRD) in situ under influence of a d.c. electric field with strength E up to ±18 kV/cm. The WAXRD measurements of the films and substrate reflection profiles resulted in a determination of the strain s in the films and the substrate separately. The strained state of the STO/LSMO films is effectively controlled by a huge converse piezoelectric effect of the PMN-PT substrate. The coefficients of coupling between electric-field-induced out-of-plane strain in the films and in the substrate for the composite system STO/LSMO/PMN-PT are obtained.     

Conductivity,magnetoresistance, and specific heat of oxygen-deficient La<Subscript>0.67</Subscript>Sr<Subscript>0.33</Subscript>MnO<Subscript>3−α</Subscript> (0≤α≤0.16)

Oxygen-deficient La_0.67Sr_0.33MnO_3?α solid solutions have been studied. A comparison is made with the results obtained in an earlier study of a similar lanthanum-calcium manganite series. The physical characteristics of both series are accounted for as being due to a change in the Mn³⁺/Mn⁴⁺ ratio caused by oxygen removal. The differences between the strontium and calcium series originate from differences in both the bulk properties of the original oxygen-stoichiometric materials and their texture. In the strontium series, the texture manifests itself in intergrain magnetoresistance, which exceeds in magnitude the colossal magnetoresistance caused by bulk properties of the material. Study of the oxygen-deficient La_0.67Sr_0.33MnO_3?α compound revealed specific features in the dependence of the electrophysical parameters on temperature and the Mn⁴⁺ fractional content that were not observed in the La_0.67Ca_0.33MnO_3?α compound studied by us earlier and in La_1?xSr_xMnO₃ samples described in the literature. The physics underlying these differences is discussed. A modified phase diagram relating the phase transition temperature to the Mn⁴⁺ fraction is proposed.     

Simulation of the structural,electronic, and magnetic properties of Fe<Subscript>3</Subscript>C<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>B<Subscript>x</Subscript> borocementites

The structural, electronic, and magnetic properties and the enthalpy of formation of iron borocementites Fe₃C_1?x B_x (x= 0, 0.25, 0.50, 0.75, 1.00) are analyzed using ab initio calculations in the framework of the electron density functional theory. It is found that the unit cell parameter a of the orthorhombic lattice increases linearly and the parameters b and c decrease as the boron concentration increases. The density of states at the Fermi level changes only slightly, and the main variations in the band structure occur in the region of the bottom of the valence bands. The magnetic moment of the iron atoms and the total magnetization and stability of the Fe₃C_1?x B_x phases increase linearly with an increase in the boron concentration.     

First principles study on electronic and optical properties of Al<Subscript>x</Subscript>Ga<Subscript>1−x</Subscript>N and In<Subscript>y</Subscript>Ga<Subscript>1−y</Subscript>N

The band structure, density of states of Al_xGa_1?xN and In_yGa_1?yN was performed by the first-principles method within the local density approximation. The calculated energy gaps of the AlN, Al_0.5Ga_0.5N, GaN, In_0.5Ga_0.5N and InN were 5.48, 4.23, 3.137, 1.274 and 0.504 eV, which were in agreement with the experimental result. The dielectric functions, absorption coefficient and loss function were calculated based on Kramers–Kronig relations. Further more, the relationships between electronic structure and optical properties were investigated theoretically. For Al_xGa_1?xN and In_yGa_1?yN materials, the micromechanism of the optical properties were explained.