On-line preconcentration and GFAAS determination of trace metals in waters

An on-line separation preconcentration system coupled to electrothermal (graphite furnace) atomic absorption spectrometry was developed. A miniature column packed with iminodiacetic acid ethyl cellulose (IDAEC) was inserted into the loop. A peristaltic pump was used to deliver solutions. A flow of air was driven into the packed column, evacuating it between sample loading, washing and elution. The retained analyte was introduced on-line to graphite furnace using countercurrent elution with HNO₃. The system was applied for the determination of V, Co and Pb in medicinal mineral water samples, and nickel in sea water samples. The detection limits (3σ) were 0.058, 0.022, 0.067, 0.062 μg/l for Co, Pb, V, and Ni, respectively. The R.S.D. (n=5) was <5% at 0.4–1.0 μg/l concentration range.     

Flow-injection preconcentration and graphite furnace atomic absorption spectrometric determination of platinum

Flow-injection graphite furnace atomic absorption spectrometric (GFAAS) methods were worked out using oxime, sulphoxine and 2,2′-diamino-diethylamine (DEN) cellulose microcolumns for preconcentration of platinum after reduction by iodide or sulphite ions. The detection limits were, at 20-fold enrichment, 0.21, 0.18 and 0.30 μg l⁻¹, respectively. The total reflection X-ray fluorescence spectrometry (TXRF) was also used for the determination of platinum in eluates. The method was applied for the determination of platinum in salmeterol xinafoate and Ca-folinate pharmaceutical compounds. Decomposition of organic matrix of Ca-folinate was necessary before the preconcentration.     

Application of ZrC-coated tubes to the determination of aluminum in serum by graphite furnace atomic absorption spectroscopy

An improved method for the determination of aluminum in serum by atomic absorption spectrometry with a graphite furnace is presented. The method is suitable for the analysis of serum samples having normal and elevated aluminum content. The serum sample can be analyzed diluted or undiluted because the selected temperatures program minimizes the matrix interferences. High temperatures are made possible by the use of graphite Zr-coated tubes. The detection limit is 0.7 μg Al/liter. The coefficient of variation is 3.2% for serum concentration of 5 μg Al/liter and 1% for serum concentration of 50 μg Al/liter.     

Study of interference of pharmaceuticals with complexing characteristics in solid phase microextraction of lead on chelating celluloses

Trace lead impurities of drugs in 1-5% solutions can be preconcentrated on imino diacetic acid-ethyl cellulose (IDAEC). The buffered sample was loaded onto a chelating cellulose minicolumn by flow injection followed by the nitric acid elution and graphite furnace atomic absorption spectrometry (GFAAS) determination. The detection limit of the procedure depending on the concentration of drug solution is in the range 2-10 ng g^− 1. The bonding of lead to various pharmaceutical compounds appeared in reduced rate during preconcentration according to the competition between ligands. The first step was focused on the determination of the stability constants of the lead-chelating cellulose species. In the second step, the sorption was estimated from different pharmaceutical matrices considering the lead-drug interaction. In the third experimental step estimated sorption was compared with the determined values for some medicines like aspartic acid, penicillamine, captopril, N-acetyl-cysteine and its pharmaceutical product, ACC 200.     

Determination of trace elements in pharmaceutical substances by graphite furnace atomic absorption spectrometry and total reflection X-ray fluorescence after flow injection ion-exchange preconcentration

Flow injection iminodiacetic acid ethyl cellulose (IDAEC) microcolumn preconcentration and graphite furnace atomic absorption spectrometry determination of trace metals (Cd, Co, Ni, Pb) were carried out without decomposition of the drug matrix. The two forms of chromium Cr(III) and Cr(VI) were separated using IDAEC and anion exchanger diethylaminoethyl (DE)-cellulose, respectively. The detection limits of trace elements in pharmaceutical substances (sugars, sorbitol, mannitol, paracetamol, amidopyrine, chloral hydrate) after a 10-fold preconcentration in 1–5% m/v solution of pharmaceuticals were in the 0.3–29 ng g⁻¹ range. The measured concentration of trace elements in substances investigated was below 100 ng g⁻¹. The spike recovery was close to 100%. The capability of total reflection X-ray fluorescence technique for the determination of trace elements in pharmaceuticals with and without preconcentation was explored.     

泡沫塑料富集–石墨炉原子吸收光谱法测定贝类水产品中痕量铊

采取微波消解的前处理手段消解样品,经泡沫塑料分离富集后,用石墨炉原子吸收光谱法测定贝类水产品中痕量铊。以1.5 mL Fe3+,2 mL H2O2和5%王水介质作为吸附体系将样品中铊分离富集,再以硝酸钯、抗坏血酸作为基体改进剂进行测定。铊的质量浓度在0～50μg/L范围内线性良好,相关系数为0.999 7,方法的检出限可达0.07μg/g。测定结果的相对别准偏差为1.53%～4.01%(n=7),加标回收率为87.1%～98.3%。泡沫塑料富集–石墨炉子吸收光谱法测定贝类水产品中痕量铊是一种准确、安全、便捷的检测方法。     

Matrix separation of palladium and iridium by the cellulose anion exchanger Cellex T and the subsequent determination of palladium at theμg/g-level

The preconcentration and separation of palladium and iridium from base metals is studied with cellulose (Cellex T) and styrene-divinylbenzene (Varion AT 400) anion exchangers. In spite of lower capacity of Cellex T to chloride complexes of Pd and Ir, it allowed to get a higher preconcentration factor. Yields of 92–99% are achieved for Pd and 96–97% for Ir from the solutions containing great excess of base and heavy metals. Graphite furnace atomic absorption spectrometry is used for the final measurements. The procedure has been applied to the determination of palladium in natural samples.     

Simultaneous separation and preconcentration of trace elements in water samples by coprecipitation on manganese dioxide using D-glucose as reductant for KMnO(4)

A field oriented and economical method of coprecipitation of trace elements like Al, Au, Bi, Cd, Co, Cu, Fe, Mo, Ni, Pb, Pd, Ti, V, W, Zn and REE has been developed. A novel reductant D-glucose, reduces KMnO₄ in solution to form a precipitate of MnO_2. Two liters of clear natural water sample is adjusted to pH 3.5–4.0, and is treated with 10 ml of 1% KMnO₄ and 20 ml of 0.1% D-glucose. The sample is heated at a temperature of 75–80 °C, MnO₂ is formed which coprecipitates the above trace elements. The precipitate is separated by filtration, dissolved in 2 ml of 50% HCl and 2 ml of 30% H₂O₂ and diluted to 25 ml for analysis using AAS and ICP-AES. The recoveries were found to be 96–105%. The preconcentration factor is 80. Limits of determination by the proposed method in natural waters are 1 μg l⁻¹ for Al, Cd, Mo, V, W, Ti and Zn, 5 μg l⁻¹ for Au, Bi, Co, Cu, Fe, Ni, Pb and Pd and 8 μg l⁻¹ for REE. The RSD of the present procedure (n=5) is 8% at 5 μg l⁻¹ level. Twenty water samples can be analyzed by an analyst in an 8-h day.     

Optimization of Flow Injection On-Line Microcolumn Preconcentration of Ultratrace Elements in Environmental Samples prior to Their Spectrochemical Determination

The preconcentration of some elements such as Cd, Co, Ni, and V(IV) was modeled in the presence of complexing agents such as citrate and oxalate at high Ca, Mg, and sulfate concentrations on iminodiacetic acid/ethyl cellulose (IDAEC), a chelating cellulose. The effect of the species present in the solution was studied after construction of the species distribution curves using critical, estimated, and measured stability constants. The stability constants of the IDAEC chelates were determined potentiometrically. The constants were calculated or estimated using computer programs. The diagrams calculated in homogeneous media were used for optimization of the flow injection on-line preconcentration for analysis of ultratrace metals in the highly mineralized water “Hunyadi.”     

Iminodiacetic acid/ethylcellulose as a chelating ion exchanger: Part 2. Determination of trace metals by inductively-coupled plasma atomic emission spectrometry

A chelate-forming cellulose, iminodiacetic acid/ethylcellulose (IDAEC), is applied to the collection of metals from ammonium citrate and acetate solutions. A method is devised for the i.c.p./a.e.s. determination of metal contaminants in magnesium by separation and preconcentration of the metals with IDAEC.     

Determination of trace metals and speciation of chromium ions in atmospheric precipitation by ICP-AES and GFAAS

Sampling and analytical techniques used for determining trace metal concentrations in atmospheric precipitation waters collected in Hungary are presented. The results of the analyses are briefly discussed and special attention is devoted to chromium speciation. For the preconcentration of the trace metals a chelating cellulose, iminodiacetic acid ethylcellulose (IDAEC) microcolumn was used in a flow-injected system. Cd, Co, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn were determined by ICP-AES. In precipitation water the concentrations of the trace elements were in the 0.1-50 mug/l. range. The two forms of chromium, Cr(III) and Cr(VI) were separated using IDAEC and the anion exchanger diethylamine ethylcellulose, respectively. Cr was determined by GFAAS. In atmospheric precipitation the concentration of Cr(III) was in the range of 0.1-0.4 mug/l. while that of Cr(VI) in the range of 0.04-0.1 mug/l.     

Column Preconcentration of Aluminum and Copper(II) in Alloys, Biological Samples, and Environmental Samples with Alizarin Red S and Cetyltrimethylammonium-Perchlorate Adsorbent Supported on Naphthalene Using Spectrometry

A column method has been established for the preconcentration of aluminum and copper(II) with Alizarin Red S and a cetyltrimethylammonium-perchlorate ion pair supported on naphthalene, using a simple glass-tipped tube. Aluminum and copper(II) react with Alizarin Red S to form water-soluble colored chelate anions. These chelate anions form water-insoluble ternary complexes with the adsorbent on the inactive surface of naphthalene packed into a column. They are quantitatively retained in the pH ranges of 4.7-5.2 for aluminum and 5.0-10.0 for copper. The solid mass is dissolved out from the column with 5 ml of dimethylformamide (DMF) for aluminum and 5 ml of ethanol for copper and the absorbance was measured with a spectrometer at 525 nm for aluminum and at 529 nm for copper. The calibration curves were linear over the concentration ranges of 0.25-5.0 μg of aluminum in 5 ml of DMF solution and 0.50-12.0 μg of copper in 5 ml of ethanol solution. The molar absorptivities and Sandell′s sensitivities were respectively calculated to be 2.8 × 10⁴ liter · mol⁻¹ · cm⁻¹ and 9.62 × 10⁻⁴ μg · cm⁻² for aluminum and 2.5 × 10⁴ liter · mol⁻¹ · cm⁻¹ and 2.5 × 10⁻³ μg · cm⁻² for copper. Seven replicate determinations of sample solutions containing 2.5 μg of aluminum and 6.0 μg of copper gave mean absorbances of 0.520 and 0.480 with relative standard deviations of 1.67 and 0.33%, respectively. Interference due to various foreign ions has been studied and the method has been applied to the determination of aluminum in standard alloys, tea leaves, vehicle particulates, copper in coal fly ash, and commercial salt samples.     

Simultaneous determination of fluorine and iodine in urine by ion chromatography with electrochemical pretreatment

A new method for the simultaneous determination of fluorine and iodine in urine by ion chromatography(IC) with electrochemical pretreatment has been developed.The pretreatment was performed in a novel electrochemical oxidation-neutralization device(EOND),in which iodide of the sample was oxidized to iodate and the alkaline digestion sample solution was neutralized.Under the optimized conditions,the limits of detection(LOD,S/N = 3) were 2.5μg/L for fluoride and 20μg/L for iodate,respectively.The recoverie...     

Use of modified rice husks as a natural solid adsorbent of trace metals: characterisation and development of an on-line preconcentration system for cadmium and lead determination by FAAS

The use of rice husks as an alternative adsorbent in an on-line preconcentration system for Cd (II) and Pb (II) determination by flame atomic absorption spectrometry (FAAS) is described. The potential of rice husks as a natural adsorbent was evaluated as a material modified with 0.75 mol l⁻¹ NaOH solution and in the unmodified form. For this task, several techniques such as spectroscopy and thermogravimetry were used for elucidation of possible functional groups responsible for the uptake of Cd (II) and Pb (II). Furthermore, based on adsorption studies and adsorption isotherms applied to the Langmüir model, it was possible to verify that modified rice husks present a higher adsorption capacity for both metals. After establishing this material as a promising natural adsorbent, it was used for on-line preconcentration of Cd (II) and Pb (II) metals. The multivariate optimisation of chemical and flow variables was performed by using a full factorial design (2⁴) including the following factors: preconcentration time, preconcentration flow rate, concentration and volume of eluent. The optimum pH values used for on-line preconcentration were taken from prior univariate experiments. Under optimised conditions for Cd (II) determination (4 min of preconcentration at a 6 ml min⁻¹ preconcentration flow rate, in which comprises 24 ml of preconcentration volume, 200 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent), the system achieved a detection limit of 1.14 μg l⁻¹ and an enrichment factor of 72.4. Similar conditions were used for Pb (II) determination (4 min of preconcentration, 6 ml min⁻¹ preconcentration flow rate, 300 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent) from which a detection limit of 14.1 μg l⁻¹ and enrichment factor of 46.0 were achieved. Also, rice husks have been shown to be a homogeneous and stable adsorbent in which more than 100 preconcentration/elution cycles provide a relative standard deviation (RSD) of less than 6.0% on the analytical signal. The satisfactory accuracy of the method developed was obtained by using spiked water samples (mineral water and lake water) and spiked red wine samples. These values were confirmed by electrothermal atomic absorption spectrometry (ETAAS). The certified reference material [pig kidney (CRM 186)] and the reference material [beech leaves (CRM 100)] were also used.     

Determination of the chloroacetanilide herbicides in waters using single-drop microextraction and gas chromatography

In this article, a new method using single-drop microextraction (SDME) and gas chromatography micro-electron capture detection (GC-μECD) for the determination of chloroacetanilide herbicides (alachlor, acetochlor, metolachlor, pretilachlor and butachlor) residues was developed. The effects of SDME parameters such as extraction solvent, stirring rate, ionic strength, microdrop volume and extraction time were optimized. The optimum experimental conditions found were: 1.6 μl toluene microdrop, 5 ml water sample, 400 rpm stirring rate, 15 min extraction time and no salt addition. Analytical parameters such as linearity, repeatability and limit of detection were also evaluated. The proposed method was proved to be a simple and rapid analytical procedure for chloroacetanilide herbicides in water with limits of detection 0.0002–0.114 μg/l. The relative recoveries range from 80% to 102% for all the target analytes, with the relative standard deviations varying from 3.9% to 11.7%.     

Solid Phase Extraction and Spectrophotometric Determination of Silver with 2-(2-Quinolylazo)-5-Dimethylaminophenol

A new chromogenic reagent, 2-(2-quinolylazo)-5-Dimethylaminophenol (QADMAP) was synthesized, and a sensitive, selective, and rapid method was developed for the determination of the μg/L level of silver ions. The method is based on the rapid reaction of silver(I) with QADMAP and the solid phase extraction of the colored chelate using a C₁₈ cartridge. The QADMAP reacts with Ag(I) in the presence of a citric acid-sodium hydroxide buffer solution (pH 5.0) and a sodium dodecyl sulfonate (SDS) medium to form a violet chelate of molar ratio 1 : 2 (silver to QADMAP). This chelate was enriched by solid phase extraction with C₁₈ cartridge, and the retained chelate was eluted from the cartridge using ethanol (with 1% acetic acid). In the ethanol medium (with 1% acetic acid), the molar absorptivity of the chelate was 1.25 × 10⁵ L mol⁻¹ cm⁻¹ at 584 nm. Beer’s law was obeyed in the range 0.01–0.6 μg/mL. The relative standard deviation for eleven replicate samples of 0.01 μg/mL was 1.86%. The detection limit is 0.02 μg/L in the original samples. The method was applied to the determination of μg/L levels of silver ions in water with good results.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 6, 2005, pp. 566–570.Original English Text Copyright © 2005 by Huang, Yang, Hu, Yin.This article was submitted by the authors in English.     

Flow-Injection Spectrophotometric Determination of Hydrazine

A flow-injection spectrophotometric method for the determination of hydrazine is described. The method is based on the inhibitory effect of hydrazine on the reaction of thionine with nitrite in acidic media. The decolorization of thionine by the reaction with nitrite was used to monitor the reaction spectrophotometrically at 602 nm. The variables that affected the reaction rate were fully investigated and the optimum conditions were established. Hydrazine can be determined in the range 2.0–40.0 μg/ml with a limit of detection of 1.0 μg/ml. The relative standard deviation for 10 replicate determinations of 7.0 μg/ml hydrazine is 3.3%. The method is simple, rapid, and widely applicable.     

Preconcentration of palladium in a flow-through electrochemical cell for determination by graphite furnace atomic absorption spectrometry

An electrochemical preconcentration at a controlled potential on the electrode in a flow-through mode followed by graphite furnace atomic absorption spectrometric (GFAAS) detection is proposed for determination of trace amounts of palladium. After electrolysis the polarization of the electrodes was changed and deposited metal was dissolved electrochemically in the presence of an appropriate stripping reagent. Conditions for the electrodeposition, such as pH of the solutions, a deposition potential, dissolution potential and a composition of stripping solution were optimised. The graphite electrode (GE) and glassy carbon electrode (GCE) were tested for the palladium reduction process. The detection limit of 0.05 ng ml⁻¹ Pd (1 pg) was obtained after palladium preconcentration on the GCE and dissolution with 0.2 mol l⁻¹ thiourea in 0.1 mol l⁻¹ HCl followed by GFAAS detection. The method was applied for the determination of palladium in spiked tap water and road dust samples.     

Some observations on the use of a new matrix modification electrothermal atomization-atomic absorption spectrophotometric method for the determination of micro- and sub-microgram amounts of molybdenum in human teeth

A very sensitive and selective electrothermal atomization-atomic absorption Spectrophotometric (ETA-AAS) matrix-modified method for the determination of micro- and submicrogram amounts (0–25 μ g⁻¹ molybdenum) in whole human one-rooted teeth has been developed. Hydrazine sulfate, (NH₂)₂ · H₂SO₄, which has been used as a matrix modifying reagent (MMR) is found to be very influential in removing matrix interference effects such as calcium which is present in hydroxy apatite (the main mineral constituent of tooth), at pH 2.0–2.2. Beer's law is obeyed over the range 0–1.5 ng molybdenum 5/μl injected solution. The absolute sensitivity and detection limit of the method are respectively 6.46 and 1.32 pg molybdenum/5 μl injected sample solution. The recovery percentage and RSD% are also determined. Compared to the neutron activation method, the proposed method is rapid, more available, and less expensive and requires no grinding of the tooth with metals, mortar, or mills. It is more sensitive and simpler than flame techniques. Background correction is not necessary. No separation or preconcentration of molybdenum is required. The method has been applied for the determination of molybdenum in teeth taken from representative districts of Baghdad.     

Flow Injection Chemiluminescence Determination of Isoniazid Using On-Line Electrogenerated Manganese(III) as Oxidant

A novel flow injection chemiluminescence (CL) system for the determination of isoniazid has been proposed. It is based on the direct CL reaction of isoniazid and Mn(III) in sulfuric acid medium. The unstable Mn(III) was on-line electrogenerated by constant current electrolysis. The CL emission intensity was linear with isoniazid concentration in the range 0.1–10 μg/mL; the detection limit was 3.2 × 10⁻² μg/mL. The whole process could be completed in 1 min with a relative standard deviation of less than 5%. The proposed method is suitable for automatic and continuous analysis and has been applied successfully to the analysis of isoniazid in pharmaceutical preparation.