Thermodynamic performance of the NaNO3–NaCl–NaNO2 ternary system

Calculations of phase diagram for additive ternary molten salt system are carried out by the conformal ionic solution theory. The liquidus temperatures of the system NaNO₃–NaCl–NaNO₂ are determined according to different types of solid–liquid equilibrium and different values of the binary interaction coefficients. For the system NaNO₃–NaCl–NaNO₂, the calculated and experimental temperatures differ are very small below 673 K, but the oxidation and decomposition of the mixed salts are found when the temperature is higher than 673 K. Meanwhile, the eutectic point is obtained from calculated phase diagram and the eutectic temperature is 507 K. Thermal stability of this eutectic mixture is investigated by thermo-gravimetric analysis device. Experimental results show this kind of molten salt has a lower melting point (501.28 K), similar to solar salt (493 K). It is thermally stable at temperatures up to 819 K, and may be used up to 827 K for short periods.     

Hygrometric Determination of the Water Activities of the Aqueous Solutions of the Mixed Electrolyte NaCl–CaCl2–H2O at 25°C

The mixture {yNaCl + (1 – y)CaCl₂}(aq) has been studied with the hygrometric method at the temperature 25°C. The water activities were measured at total molalities from 0.25 mol-kg^–1 to near saturation for different ionic-strength fractions y of NaCl with y = 0.33, 0.50, and 0.67. The obtained data allow the calculation of osmotic coefficients. The experimental results are compared with the predictions of the Zdanovskii–Stokes–Robinson (ZSR), Kusik and Meissner (KM), Robinson and Stokes (RS), Lietzke and Stoughton (LS II), Reilly–Wood–Robinson (RWR), and Pitzer models. From the measured osmotic coefficients, the Pitzer ionic mixing parameters _{Na Ca} and _{Na Ca} Cl are determined and are used to predict the solute activity coefficients in the mixtures. The excess Gibbs energy is also determined. These results are compared with those given in the literature.     

Measurements of the Solid–Liquid Equilibria in the Quaternary System NaCl–NaBr–Na2SO4–H2O at 323 K

Phase equilibria of the quaternary NaCl–NaBr–Na₂SO₄–H₂O system at 323 K were studied by the isothermal dissolution equilibrium method. The solubilities of salts and densities of saturated solutions were determined. Solid solutions [Na(Cl, Br)] were found in the experiments. The phase diagram of the quaternary system has no invariant point, but has one univariant curve at the boundary of Na(Cl, Br) and Na₂SO₄ crystallization fields. The experimental results show that an increase of the NaBr concentration is accompanied by an obvious increase of the solution density and the decrease of the solubilities of NaCl and Na₂SO₄.     

Heterogeneous reaction of NO_2 on the surface of NaCl particles

Sodium chloride is the major constituent of sea salt particles in atmospheric environment, with an esti- mated annual contribution of 1012 kg of sea salt parti- cles to the atmosphere[1]. Many studies have shown a significant chloride deficit in these particles when compared to bulk seawater[2,3]. This deficit has been attributed to reactions with NOx and SO2[4]. Simulta- neously, NO2 is one of the main pollutants of mobile vehicles. Reaction (1) may be particularly important to the atmosph…     

Determination of the solubility product of plutonium sesquioxide in the NaCl+CaCl2 eutectic and calculation of a potential–pO2− diagram

Reactions between plutonium trichloride and oxide ions were studied in the fused NaCl+CaCl₂ equimolar mixture at 823 K, by potentiometry with an yttria-stabilised zirconia membrane electrode. Titration curve demonstrated the existence of a precipitated plutonium oxide (Pu₂O₃) with dissociation constant 10^−17.5 (molality scale). The combination of this data with the standard potentials allowed to set up the potential–pO²⁻ diagram of plutonium which summarises the properties of plutonium species in the melt.     

Thermal Studies of the Hardening of the Systems Calcium Silicates–Electrolyte–Water

Thermal studies, sometimes together with X-ray analysis, were applied to investigate the process of hydration in the systems calcium silicates (tricalcium silicate or dicalcium silicate) - water - electrolyte. Alkali metal or alkaline-earth metal salts were used as electrolytes. Results and conclusions are presented concerning the action of electrolytes upon the kinetics of hardening of the calcium silicates and the composition and phase transformation of calcium hydrosilicate in the presence of low proportions of electrolytes (0.5, 2 and 5 mass%), these effects being due to ionic substitution. A higher proportion of electrolyte (above 2%) in the systems calcium silicate-water can determine the formation of a complex salt, e.g. calcium hydroxysalts or double hydrosilicates. This revised version was published online in August 2006 with corrections to the Cover Date.     

Kinetic analysis of the crystallization processes in the glasses of the Bi–As–S system

Kinetic analysis of the crystallization process in Bi₄(As₂S₃)₉₆ and Bi₆(As₂S₃)₉₄ glasses was performed based on DSC curves recorded under non-isothermal measurement conditions. Samples were thermally treated at different heating rates in the temperature range 300?C770?K. The activation energy of crystallization E and the pre-exponential factor K ₀ are determined by the Kissinger method and the characteristic crystallization parameters m and n of investigated glasses by the Matusita method. For both crystallization processes the glass with 4 at.% of Bi is characterized by the mechanism of volume nucleation, which is manifested in the form of two-dimensional growth at the first crystallization process, and as three-dimensional at the second one. On the other hand, in the sample with 6 at.% Bi, the average value of the parameter m is close to one, which indicates one-dimensional crystal growth. Compatibility of the values of the parameters m and n suggests that this sample has a large number of crystallization centers, which do not increase significantly during the thermal treatment.     

The influence of the temperature on the liquid–liquid equilibrium of the ternary system 1-pentanol–ethanol–water

Liquid–liquid equilibrium data for the ternary system 1-pentanol–ethanol–water have been determined experimentally at 25, 50, 85 and 95°C. These results have been correlated simultaneously by the uniquac method obtaining two sets of interaction parameters: one of them independent of the temperature and the other with a linear dependence. Both sets of parameters fit the experimental results well.     

LC–DAD–ESI-MS–MS Separation and Chemical Characterization of the Inflammatory Fraction of the Roots of Euphorbia kansui

In China the roots of Euphorbia kansui T.N. Liou ex T.P. Wang, known as ‘kansui’, have been used for centuries as a herbal remedy for edema, ascites, and asthma. Kansui, has inflammatory and tumor-promoting toxicity, and other side-effects, however, which have seriously restricted its clinical application. In the work discussed in this paper a simple and rapid LC–DAD–ESI-MS–MS method has been established for separation and characterization of the main compounds in the toxic fraction of E. kansui roots. Twelve diterpene derivatives were identified in the inflammatory fraction of kansui: kansuinine C, kansuinine B, kansuinine A, kansuinine D, 5-O-benzoyl-20-deoxyingenol, kansuinine E, kansuiphorin C, 3-O-benzoyl-20-deoxyingenol, 3-O-(2′E,4′Z-decadienoyl)-5-O-acetylingenol, 3-O-(2′E,4′Z-decadienoyl)-20-deoxyingenol, 20-O-(2′E, 4′E-decadienoyl)ingenol, and 3-O-(2′E,4′Z-decadienoyl)-20-O-acetylingenol. The inflammatory fraction was separated on a C₁₈ reversed-phase column with a mobile phase gradient. The proposed method is a scientific and technical platform enabling the herbal medicine industry to perform quality control and ensure the safety of preparations that contain this class of poisonous diterpenoids.     

Determination of the NaFaq association constant for the NaF–NaCl–H<Subscript>2</Subscript>O System at 25–75°C by means of potentiometry

Potentiometric measurements are made for the NaF–NaCl–H₂O system at 25, 50, and 75°C using Na⁺- and F^–-sensitive electrodes and a Ag/AgCl reference electrode in both liquid junction and liquid junction free cells. A correction for the liquid junction potential is introduced to the liquid junction cells. The activity coefficients are calculated using the Debya–Hückel equation in the third approximation. The NaF thermodynamic association constants are determined (logK° =–0.375,–0.29, and–0.25) with an error of ±0.1 log units at 25, 50, and 75°C, respectively.     

Solid–liquid equilibria in the NaCl–SrCl2–H2O system at 288.15 K

The phase equilibria in the ternary system NaCl–SrCl₂–H₂O at 288.15 K were studied with the isothermal equilibrium solution method. The phase diagram and refractive index diagram were plotted for this system at 288.15 K. The phase diagram contains one invariant solubility point, two univariant solubility curves, and two crystallization fields of NaCl and SrCl₂ · 6H₂O. The refractive indices of the equilibrium solution change regularly with w(NaCl) increase. The calculated refractive index data are in good agreement with the experimental data. Combining the experimental solubility data of the ternary system, the Pitzer binary parameters for NaCl at 288.15 K and SrCl₂ at 298.15 K, the Pitzer mixing parameters θ_{Na, Sr}, Ψ_{Na, Sr, Cl} and the solubility equilibrium constants Ksp of solid phases existing in the ternary system at 288.15 K were fitted using the Pitzer and Harvie-Weare (HW) models. The mean activity coefficients of sodium chloride and strontium chloride, and the solubilities for the ternary system at 288.15 K were presented. A comparison between the calculated and measured solubilities shows that the predicted data agree well with the experimental results.     

Effect of the Acid–Base Properties of the Support on the Activity of Pd–Zeolite Catalysts for CO Oxidation

The effect of the acid–base properties of zeolite Y on the activity of palladium–zeolite catalysts for CO oxidation was studied. The modification of the support with basic additives was found to improve the catalyst activity. A linear correlation between the ratio between the amounts of O₂and CO adsorbed on the surface of palladium and the catalyst activity was established.     

On the Nature of the Cherdyntsev–Chalov Effect

It is shown that the Cherdyntsev–Chalov effect, usually presented as the separation of even isotopes of uranium upon their transition from the solid to the liquid phase, can include initiated acceleration of the radioactive decay of uranium-238 nuclei during the formation of cracks in geologically (seismic and volcanically) active zones of the Earth’s crust. The fissuring of the solid-phase medium leads to an increase in mechanical tensile stress and the emergence of strong local electric fields, resulting in the injection of chemical-scale high-energy electrons into the aqueous phase of the cracks. Under these conditions, the e^? catalytic decay of uranium-238 nucleus studied earlier can occur during the formation of metastable protactinium-238 nuclei with locally distorted nucleon structure, which subequently undergo β^–decay with the formation of thorium-234 and helium-4 nuclei as products of the fission of the initial uranium-238 nucleus with a characteristic period of several years. The observed increased activity of uranium-234 nuclei that form during the subsequent β-decay of thorium and then protactinium is associated with the initiated fission of uranium-238. The possibility is discussed of developing thermal power by using existing wastes from uranium production that contain uranium-238 to activate this isotope through the mechanochemical processing of these wastes in aqueous media with the formation of ₉₁ ²³⁸ Pa _isu , the half-life of which is several years.     

Simple modification of the temperature dependence of the Sanchez–Lacombe equation of state

In this work, the interaction energy term of the Sanchez–Lacombe equation of state (SL EOS) was modified to take into account the temperature dependence of hydrogen bonding and ionic interactions. A simple function was used in the form of the Langmuir equation that reduces to the original SL EOS at high temperature. Comparisons are shown between the ?*-modified SL EOS and the original SL EOS. The ?*-modified SL EOS could represent volumetric data for the group of non-polar fluids, polar fluids and ionic liquids to within an absolute average deviation (AAD) of 0.85%, 0.51%, and 0.054%, respectively whereas, the original Sanchez–Lacombe EOS gave AAD values of 0.99%, 1.2%, and 0.21%, respectively. The ?*-modified SL EOS provides remarkably better PVT representation and can be readily applied to mixtures.     

Formation of the layering boundary in the water–benzene–perfluorobenzene system

The dynamics of the interface between liquid phases in the water–benzene–perfluorobenzene system was studied in a natural experiment. The interfacial tension was found to depend on the density of the organic layer. The range of interfacial tensions in which inversion of the organic and aqueous phases takes place was determined, and the working range of a separating flask as an element of the separation scheme for the mixture was revealed.     

Study and 3D modeling of the phase diagram of the Ag–Ge–Se system

In view of the contradictoriness of the literature data, phase equilibria in the Ag–Ge–Se system were restudied by differential thermal analysis and X-ray powder diffraction analysis. A number of polythermal sections and an isothermal section at room temperature of the phase diagram were constructed, and so was the projection of the liquidus surface. The primary crystallization fields of phases and the types and coordinates of in- and monovariant equilibria were determined. It was shown that, in the system, a single ternary compound, Ag₈GeSe₆, forms, which undergoes congruent melting at 1175 K and a polymorphic transformation at 321 K. The formation of the compounds Ag₂GeSe₃ and Ag₈GeSe₅, which was previously reported in the literature, was not confirmed. Based on the phase diagrams of boundary binary systems and the results of the differential thermal analysis of a number of samples of the ternary system, equations were obtained for calculation and 3D modeling of the liquidus and phase-separation surfaces.     

The effect of NaCl on the adsorption of human IgG onto CM-Asp–PEVA hollow fiber membrane-immobilized nickel and cobalt metal ions

Over the past decade, immobilized metal-affinity adsorbents have attracted increasing interest for purification of natural and recombinant immunoglobulin G (IgG). In this work, nickel and cobalt metal ions complexed with CM-Asp (carboxymethylaspartate) immobilized on poly(ethylenevinyl alcohol) (PEVA) hollow fiber membranes were evaluated for purification of human IgG from serum. The buffer system and NaCl had important effects on human serum protein adsorption in both adsorbents. Efficient purification of IgG was accomplished in sodium phosphate buffer without NaCl at pH 7.0. Under this condition, the electrostatic interactions are important for adsorption. The Ni(II)-CM-Asp–PEVA had a protein adsorption capacity of 17.5 mg of IgG mL^?1 fiber when human serum diluted was loaded in crossflow filtration mode and the eluted IgG had a purity of 82.6 % (based on total protein and IgG, IgM, HSA, and Trf nephelometric analysis). Fitting the experimental IgG adsorption data to the Langmuir and Langmuir–Freundlich models showed that Ni(II)-CM-Asp and Co(II)-CM-Asp had Langmuirean and non-Langmuirean behavior, respectively, with positive cooperativity for IgG-Co(II)-CM-Asp binding, probably due to multipoint interactions (n = 2.12 ± 0.31). Thus, these membranes can be considered as alternative adsorbents for the purification or depletion of IgG from human serum.