Highly Crystalline Mesoporous Phosphotungstic Acid: A High‐Performance Electrode Material for Energy‐Storage Applications

Heteropoly acids (HPAs) are unique materials with interesting properties, including high acidity and proton conductivity. However, their low specific surface area and high solubility in polar solvents make them unattractive for catalytic or energy applications. This obstacle can be overcome by creating nanoporosity within the HPA. We synthesized mesoporous phosphotungstic acid (mPTA) with a spherical morphology through the self‐assembly of phosphotungstic acid (PTA) with a polymeric surfactant as stabilized by KCl and hydrothermal treatment. The mPTA nanostructures had a surface area of 93 m² g^?1 and a pore size of 4 nm. Their high thermal stability (ca. 450 °C) and lack of solubility in ethylene carbonate/diethyl carbonate (EC/DEC) electrolyte are beneficial for lithium‐ion batteries (LIBs). Optimized mPTA showed a reversible capacity of 872 mAh g^?1 at 0.1 A g^?1 even after 100 cycles for LIBs, as attributed to a super‐reduced state of HPA and the storage of Li ions within the mesochannels of mPTA.     

Three Dimensionally Ordered Mesoporous Carbon as a Stable,High‐Performance Li–O2 Battery Cathode

Enabled by the reversible conversion between Li₂O₂ and O₂, Li–O₂ batteries promise theoretical gravimetric capacities significantly greater than Li‐ion batteries. The poor cycling performance, however, has greatly hindered the development of this technology. At the heart of the problem is the reactivity exhibited by the carbon cathode support under cell operation conditions. One strategy is to conceal the carbon surface from reactive intermediates. Herein, we show that long cyclability can be achieved on three dimensionally ordered mesoporous (3DOm) carbon by growing a thin layer of FeO_x using atomic layer deposition (ALD). 3DOm carbon distinguishes itself from other carbon materials with well‐defined pore structures, providing a unique material to gain insight into processes key to the operations of Li–O₂ batteries. When decorated with Pd nanoparticle catalysts, the new cathode exhibits a capacity greater than 6000 mAh g_carbon⁻¹ and cyclability of more than 68 cycles.     

Water‐Induced Growth of a Highly Oriented Mesoporous Graphitic Carbon Nanospring for Fast Potassium‐Ion Adsorption/Intercalation Storage

A highly oriented mesoporous graphitic carbon nanospring (OGCS) with graphitic layers that are perpendicular to the axis is prepared by hydrothermal treatment of epoxy resin at 500 °C and annealing at 1400 °C. Water plays an important role in not only forming the graphitic carbon nanospring with a high [002] orientation and a large amount of active edge‐plane sites, but also in the generation of the mesoporous structure, which facilitate fast K‐ion adsorption and diffusion. In situ and ex situ measurements confirm that OGCS undergoes K‐adsorption in mesopores and then K‐intercalation in the graphite layer to form KC₈ with a low discharge voltage. The spring‐like nanostructure can expand one‐dimensionally along the axial direction to accommodate the volume variation. The OGCS electrode thus shows a much better K‐storage performance than that of unoriented graphitic carbon.