3D Printed High‐Throughput Hydrothermal Reactionware for Discovery,Optimization, and Scale‐Up

3D printing techniques allow the laboratory‐scale design and production of reactionware tailored to specific experimental requirements. To increase the range and versatility of reactionware devices, sealed, monolithic reactors suitable for use in hydrothermal synthesis have been digitally designed and realized. The fabrication process allows the introduction of reaction mixtures directly into the reactors during the production, and also enables the manufacture of devices of varying scales and geometries unavailable in traditional equipment. The utility of these devices is shown by the use of 3D printed, high‐throughput array reactors to discover two new coordination polymers, optimize the synthesis of one of these, and scale‐up its synthesis using larger reactors produced on the same 3D printer. Reactors were also used to produce phase‐pure samples of coordination polymers MIL‐96 and HKUST‐1, in yields comparable to synthesis in traditional apparatus.     

Screen‐Printed Electrochemical 96‐Well Plate: a High‐Throughput Platform for Multiple Analytical Applications

A new screen‐printed electrochemical array formed by 96 three‐electrode electrochemical cells with carbon‐based working electrodes (DRP‐96X110) was developed by DropSens. The electrochemical and electro(analytical) performance of this multiple‐analysis plate is herein presented. Different proofs of concept relying on reference benchmark redox compounds, streptavidin‐biotin high affinity interactions and magnetic‐based immunoassays were carried out. The results showed the electrochemical plate versatility and usefulness as an innovative high‐throughput transducer surface for multiple and decentralized applications.     

High‐Throughput Kinetic Analysis for Target‐Directed Covalent Ligand Discovery

Cysteine‐reactive small molecules are used as chemical probes of biological systems and as medicines. Identifying high‐quality covalent ligands requires comprehensive kinetic analysis to distinguish selective binders from pan‐reactive compounds. Quantitative irreversible tethering (qIT), a general method for screening cysteine‐reactive small molecules based upon the maximization of kinetic selectivity, is described. This method was applied prospectively to discover covalent fragments that target the clinically important cell cycle regulator Cdk2. Crystal structures of the inhibitor complexes validate the approach and guide further optimization. The power of this technique is highlighted by the identification of a Cdk2‐selective allosteric (type IV) kinase inhibitor whose novel mode‐of‐action could be exploited therapeutically.     

Evaluation of 3D Printed Gelatin‐Based Scaffolds with Varying Pore Size for MSC‐Based Adipose Tissue Engineering

Adipose tissue engineering aims to provide solutions to patients who require tissue reconstruction following mastectomies or other soft tissue trauma. Mesenchymal stromal cells (MSCs) robustly differentiate into the adipogenic lineage and are attractive candidates for adipose tissue engineering. This work investigates whether pore size modulates adipogenic differentiation of MSCs toward identifying optimal scaffold pore size and whether pore size modulates spatial infiltration of adipogenically differentiated cells. To assess this, extrusion‐based 3D printing is used to fabricate photo‐crosslinkable gelatin‐based scaffolds with pore sizes in the range of 200–600 µm. The adipogenic differentiation of MSCs seeded onto these scaffolds is evaluated and robust lipid droplet formation is observed across all scaffold groups as early as after day 6 of culture. Expression of adipogenic genes on scaffolds increases significantly over time, compared to TCP controls. Furthermore, it is found that the spatial distribution of cells is dependent on the scaffold pore size, with larger pores leading to a more uniform spatial distribution of adipogenically differentiated cells. Overall, these data provide first insights into the role of scaffold pore size on MSC‐based adipogenic differentiation and contribute toward the rational design of biomaterials for adipose tissue engineering in 3D volumetric spaces.     

Two‐Photon Polymerization as a Tool for Studying 3D Printed Topography‐Induced Stem Cell Fate

Geometric topographies are known to influence cellular differentiation toward specific phenotypes, but to date the range of features and type of substrates that can be easily fabricated to study these interactions is somewhat limited. In this study, an emerging technology, two‐photon polymerization, is used to print topological patterns with varying feature‐size and thereby study their effect on cellular differentiation. This technique offers rapid manufacturing of topographical surfaces with good feature resolution for shapes smaller than 3 µm. Human‐induced pluripotent stem cells, when attached to these substrates or a non‐patterned control for 1 week, express an array of genetic markers that suggest their differentiation toward a heterogeneous population of multipotent progenitors from all three germ layers. Compared to the topographically smooth control, small features (1.6 µm) encourage differentiation toward ectoderm while large features (8 µm) inhibit self‐renewal. This study demonstrates the potential of using two‐photon polymerization to study and control stem cell fate as a function of substrate interactions. The ability to tailor and strategically design biomaterials in this way can enable more precise and efficient generation or maintenance of desired phenotypes in vitro and in vivo.     

3D‐Printed Microfluidics

The advent of soft lithography allowed for an unprecedented expansion in the field of microfluidics. However, the vast majority of PDMS microfluidic devices are still made with extensive manual labor, are tethered to bulky control systems, and have cumbersome user interfaces, which all render commercialization difficult. On the other hand, 3D printing has begun to embrace the range of sizes and materials that appeal to the developers of microfluidic devices. Prior to fabrication, a design is digitally built as a detailed 3D CAD file. The design can be assembled in modules by remotely collaborating teams, and its mechanical and fluidic behavior can be simulated using finite‐element modeling. As structures are created by adding materials without the need for etching or dissolution, processing is environmentally friendly and economically efficient. We predict that in the next few years, 3D printing will replace most PDMS and plastic molding techniques in academia.     

Microfluidic‐Printed Microcarrier for In Vitro Expansion of Adherent Stem Cells in 3D Culture Platform

Microcarrier‐based stem cell expansion cultures can increase the dimensions of in vitro stem cell cultures from 2D to 3D. The culture handling process then becomes more efficient compared with conventional 2D cultures. However, the use of spherical plastic microcarriers complicates the monitoring of cell culture. To facilitate monitoring, transparent disc‐shaped microcarriers are manufactured using a light‐initiated microfluidic printing system and the obtained microcarriers are named as 2.5D microcarrier. The 2.5D microcarriers (diameter/height ≈ 5) enable us to use conventional monitoring tools in 2D‐based platform during the in vitro expansion on a 3D culture platform. Surface modification via a 1 h‐long poly‐dopamine (PDA) reaction can maintain the transparent nature of the microcarriers while optimizing the cell attachment. The surface marker expression and differentiation potential of the 2.5D microcarrier‐expanded stem cells reveal that the characteristics and functionalities preserved during expansion. The 2.5D microcarrier is readily integrated into an on‐bead assay to conserve reagents and permit a high number (n = 9) of repeated measurements with reliable results. These results demonstrate that the 2.5D microcarrier‐based scale‐up culture provides a valuable tool for the in vitro expansion of adherent stem cells, especially if repetitive monitoring is required.     

High‐Throughput Metabolomics by 1D NMR

Metabolomics deals with the whole ensemble of metabolites (the metabolome). As one of the ‐omic sciences, it relates to biology, physiology, pathology and medicine; but metabolites are chemical entities, small organic molecules or inorganic ions. Therefore, their proper identification and quantitation in complex biological matrices requires a solid chemical ground. With respect to for example, DNA, metabolites are much more prone to oxidation or enzymatic degradation: we can reconstruct large parts of a mammoth's genome from a small specimen, but we are unable to do the same with its metabolome, which was probably largely degraded a few hours after the animal's death. Thus, we need standard operating procedures, good chemical skills in sample preparation for storage and subsequent analysis, accurate analytical procedures, a broad knowledge of chemometrics and advanced statistical tools, and a good knowledge of at least one of the two metabolomic techniques, MS or NMR. All these skills are traditionally cultivated by chemists. Here we focus on metabolomics from the chemical standpoint and restrict ourselves to NMR. From the analytical point of view, NMR has pros and cons but does provide a peculiar holistic perspective that may speak for its future adoption as a population‐wide health screening technique.     

High‐Throughput Screening in Olefin‐Polymerization Catalysis: From Serendipitous Discovery Towards Rational Understanding

High–throughput‐screening (HTS) tools and methods are used more and more, especially in industry, in the search for new, selective organometallic catalysts. In most cases, the approach is, in essence, empirical, and the strategy is to increase the number of experiments that can be run at a given place in a given time. Highly miniaturized, parallel reaction setups have been implemented for the rapid assessment of whether novel catalysts resulting from the structural amplification of a basic framework are “good” or “bad” with respect to the properties of interest, and, depending on the response, worthy of a subsequent, more‐careful evaluation. In this article, we demonstrate that it is possible to utilize these state‐of‐the‐art HTS platforms with a different strategy: the rapid generation of reliable kinetic data for mechanistic studies in view of a thorough understanding and rational catalyst design. Ziegler–Natta‐type catalytic olefin polymerization will be used throughout as an example.

     

A Stereolithography‐Based 3D Printed Hybrid Scaffold for In Situ Cartilage Defect Repair

Damage to articular cartilage can over time cause degeneration to the tissue surrounding the injury. To address this problem, scaffolds that prevent degeneration and promote neotissue growth are needed. A new hybrid scaffold that combines a stereolithography‐based 3D printed support structure with an injectable and photopolymerizable hydrogel for delivering cells to treat focal chondral defects is introduced. In this proof of concept study, the ability to a) infill the support structure with an injectable hydrogel precursor solution, b) incorporate cartilage cells during infilling using a degradable hydrogel that promotes neotissue deposition, and c) minimize damage to the surrounding cartilage when the hybrid scaffold is placed in situ in a focal chondral defect in an osteochondral plug that is cultured under mechanical loading is demonstrated. With the ability to independently control the properties of the structure and the injectable hydrogel, this hybrid scaffold approach holds promise for treating chondral defects.     

Determination of Vitamin D3 Metabolites Using High‐Performance Liquid Chromatography or Immunoaffinity Chromatography

Our investigation of the analysis of vitamin D₃ metabolites has been reviewed. The development of high‐performance liquid chromatographic methods for the quantitative determination of 25‐hydroxyvitamin D₃ 3‐sulfate and 25‐hydroxyvitamin D₃, which are the major circulating metabolites of vitamin D₃ in human serum/plasma, has been described. The developed methods were applied to the determination of the correlation between the concentration of the sulfate and its genin in healthy subjects and patients with chronic renal failure. The development of immunoaffinity chromatography immobilizing the highly specific anti‐1,25‐dihydroxyvitamin D₃ antibody for the pretreatment of radioreceptor assay of 1,25‐dihydroxyvitamin D₃, which is the active metabolite of vitamin D₃, is also described.     

Synthesis of poly(D,L‐lactic acid‐alt‐glycolic acid) from D,L‐3‐methylglycolide

D ,L ‐3‐Methylglycolide (MG) was synthesized via two step reactions with a good yield (42%). It was successfully polymerized in bulk with stannous octoate as a catalyst at 110 °C. The effects of the polymerization time and catalyst concentration on the molecular weight and monomer conversion were studied. Poly(D ,L ‐lactic acid‐co‐glycolic acid) (D ,L ‐PLGA50; 50/50 mol/mol) copolymers were successfully synthesized from the homopolymerization of MG with high polymerization rates and high monomer conversions under moderate polymerization conditions. ¹H NMR spectroscopy indicated that the bulk ring‐opening polymerization of MG conformed to the coordination–insertion mechanism. ¹³C NMR spectra of D ,L ‐PLGA50 copolymers obtained under different experimental conditions revealed that the copolymers had alternating structures of lactyl and glycolyl. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4179–4184, 2000     

High‐Throughput Method for Determining Modulus of Polymer Blends

Summary: A method for rapidly determining the modulus of polymer blends was developed. A polymer blend gradient library of poly(L ‐lactic acid) (PLLA) and poly(D ,L ‐lactic acid) (PDLLA) was created in the form of a strip‐shaped film and characterized with FTIR microspectroscopy. Nanoindentation measurements were made along the gradients to obtain modulus data over a wide range of PLLA‐PDLLA blend compositions. This novel, high‐throughput approach to material characterization provides engineers with a technique to accelerate the development of materials.

Deposition of the polymer composition gradient.