Structural,dielectric, electrical and magnetic properties of chemicothermally synthesized material: BiCaFeCeO6

In this communication, detailed studies of structural, micro-structural, dielectric, electrical (impedance, modulus and conductivity) and magneto-electric characteristics of a chemico-thermally synthesized sample of a double perovskite bismuth calcium iron cerate (BiCaFeCeO₆) have been reported. Preliminary structural analysis of room temperature X-ray diffraction data shows orthorhombic structure of the material. The homogeneous distribution of the grains of different dimensions (shape, size, etc) with a small number of voids observed in the scanning electron micrograph suggests the formation of high-density sample. Detailed analysis of dielectric and impedance experimental data, collected at different frequency and temperatures, have provided many important characteristics of the material, such as (a) grains, grain boundaries, and electrode dependent capacitive and impedance parameters, (b) co-relation between the structure, micro-structure and physical properties and (c) the relaxation characteristics of the tested samples. The nature of frequency dependence of AC conductivity of the material obeys the Jonscher's universal power law. The temperature dependence of conductivity provides the conduction mechanism in the material. Detailed studies of field dependence of electric polarization, magnetization and magneto-electric coefficient at room temperature exhibit the multiferroic characteristics of the material.     

Dielectric and impedance properties of Bi(Zn2/3V1/3)O3 electronic material

A polycrystalline vanadium doped lead free dielectric material of Bi(Zn_2/3V_1/3)O₃ (BZV) has been prepared using a standard high-temperature solid state reaction technique. Its temperature and frequency dependent capacitive, conductive and resistive characteristics are outlined though experimental investigation. The formation of single phase compound of BZV material with orthorhombic crystal symmetry is identified through X-ray diffraction data analysis, and the homogeneous distribution of grains are realized through scanning electron micrograph. The acquaintance of frequency–temperature dependent electrical parameters with the obtained micrograph provides the experimental evidence of contributions of grain as well as grain boundary in its capacitive and resistive characteristics. The negative temperature coefficient of resistance behaviour of the material is revealed from impedance characteristic, and non-Debye type relaxation has been realized from the Nyquist plot. The charge carriers of this electronic compound have both long & short range order that has been validated from the complex modulus and impedance analysis. The prepared electronic material substantiate some important dielectric features which props up the material as promising component for electronic devices.     

Synthesis,structural and complex impedance spectroscopy studies of Ni0.4Co0.4Mg0.2Fe2O4 spinel ferrite

Spinel ferrite having composition Ni_0.4Co_0.4Mg_0.2Fe₂O₄ was prepared by sol-gel method. X-ray diffraction result indicates that the ferrite sample has a cubic spinel type structure. FT-IR showed two absorption bands (ν₁ and ν₂) that are attributed to the stretching vibration of tetrahedral and octahedral sites. Complex impedance properties have been investigated in 200–420 K temperature range with varying frequency between 40 and 10⁷ Hz. Frequency and temperature dependency of imaginary part of permittivity (?″) and dielectric loss (tanδ) has been discussed in terms of hopping of charge carriers between Fe²⁺ and Fe³⁺ ions. Activation energy has been estimated from both temperature dependency of dc conductivity and relaxation time data, which indicates that the relaxation process and conductivity have the same origin. Nyquist plots of impedance show semicircle arcs for sample and an electrical equivalent circuit has been proposed to explain the impedance results.     

Exchange coupling between Co<Subscript>0.9</Subscript>Fe<Subscript>0.1</Subscript> and bismuth ferrite layers: Cut (110)

The value of the exchange coupling between a Co_0.9Fe_0.1 nanolayer and a bismuth ferrite multiferroic (BiFeO₃) nanolayer has been calculated. Two possible variants of matching of the layer crystal structures are proposed. The interaction energy of the layers is shown to be sufficient to record information in the Co_0.9Fe_0.1 layer that enters in the composition of the magnetic tunnel junction by applying an electric field to the bismuth ferrite layer.     

Magnetoelectric response and dielectric property of multiferroic Co0.65Zn0.35Fe2O4–PbZr0.52Ti0.48O3 nanocomposites

The effect of nanometric grain size modulation on the behavior of different kinds of chemically synthesized multiferroic ferrite–ferroelectric nanocomposites with cobalt zinc ferrite (Co_0.65Zn_0.35Fe₂O₄) as a ferrimagnetic component and lead zirconate titanate (PbZr_0.52Ti_0.48O₃) as a ferroelectric component have been investigated in detail. Formation of two distinct pure phases of as-prepared nanocomposites was confirmed from recorded X-ray diffraction patterns at room temperature. The backscattered mode of a field emission scanning electron microscope micrograph has been used to study the microstructure, average grain size, and distribution of the two individual phases in the composites. Magnetization vs. magnetic field measurements clearly show the room temperature good hysteretic ferrimagnetic behavior of the composites having coercivity of 83–124 Oe and spontaneous magnetization of 20–24 emu/g. The dielectric constant is found to increase with increasing grain size of the nanocomposites from 124 to 687 at a frequency of 1 kHz. Investigation of temperature-dependent dielectric constant behavior reveals that the paraelectric–ferroelectric transition temperature decreases from 364 to 351 °C with decreasing particle size. A complex impedance spectroscopy study was carried out in the frequency range of 50 Hz–1 MHz and in the temperature range of 27–400 °C. The contribution of both grains and grain boundaries in the electrical properties of the composites has been confirmed from the complex impedance spectroscopy data. The activation energies estimated from the complex impedance spectroscopy and the ac conductivity spectrum are found to be nearly the same for the nanocomposites. The polarization vs. electric field measurement exhibits a typical ferroelectric hysteresis loop at room temperature and provides conclusive evidence of the presence of spontaneous polarization in the composites, confirming the presence of excellent ferroelectricity in the nanocomposites. At room temperature the multiferroic behavior of the composites is also confirmed from detailed magnetoelectric (ME) response studies. The optimal ME response is observed to be 0.6 % for higher temperature sintered composites.     

Structural and impedance properties of Ca3Nb2O8 ceramics

Polycrystalline sample of Ca₃Nb₂O₈ was prepared by a high-temperature solid-state reaction technique. X-ray diffraction (XRD) analysis confirms the formation of single-phase compound of hexagonal (rhombohedral) crystal structure at room temperature. Scanning electron micrograph of the material showed uniform grain distribution on the surface of the sample. Detailed studies of dielectric properties of the compound, studied in a wide frequency range (10²-10⁶ Hz) at different temperatures (25-500 °C), exhibit a dielectric anomaly suggesting phase transition of ferroelectric-paraelectric and structural type at 300 °C. Electrical properties of the material were analyzed using a complex impedance technique. The Nyquists plot showed the presence of bulk effect in the material in the studied temperature range. Studies of electrical conductivity over a wide temperature range suggest that the compound has negative temperature coefficient of resistance behavior.     

Effect of the electric field on “incommensurate-commensurate” magnetic phase transitions in BiFeO3-type multiferroics

The specific features of the “incommensurate-commensurate” phase transitions induced by a magnetic field in multiferroics (materials with coexisting magnetic and electric ordering) are considered. These materials are ferroelectromagnets, for example, bismuth ferrite BiFeO₃ and BiFeO₃-based compounds, which have spatially modulated spin structures. It is shown that the interaction between the electric and magnetic subsystems of the multiferroic material can lead to an electric-field-induced shift of the critical magnetic field corresponding to the transition from a spatially modulated state to a homogeneous antiferromagnetic state. According to the theoretical estimates obtained for material parameters characteristic of the bismuth ferrite, this shift is of the order of 0.5 T in an electric field of 50 kV/cm. The phase diagrams are constructed in the “electric field-magnetic field” coordinates. The results of calculations performed in the harmonic incommensurate structure approximation are compared with the exact soliton solution.     

Structural and electrical properties of Na1/2La1/2TiO3 ceramics

Na_1/2La_1/2TiO₃ (NLT) ceramic was prepared by a high-temperature solid-state reaction technique. A preliminary structural analysis (XRD) suggested the formation of a single-phase orthorhombic structure. SEM micrograph of the material showed uniform grain distribution on the surface of the sample. The dielectric permittivity and the loss tangent of the sample were measured in a frequency range from 1 kHz to 1 MHz and a temperature range 28 °C to 525 °C. Electrical properties of the material were studied using an ac impedance spectroscopic technique. Detailed analysis of the impedance spectrum suggested that the electrical properties of the material are strongly temperature dependant. The Nyquist plots clearly showed the presence of both bulk and grain boundary effect in the compound. The activation energy was estimated to be 1.1 eV from the temperature variation of dc conductivity. The a.c. conductivity spectrum suggests a typical signature of ion conducting system. PACS 77.22.Ch; 77.22.Gm; 77.80.Bh; 77.22.Ej     

Study of complex impedance spectroscopic properties of the KFeP2O7 compound

The KFeP₂O₇ compound was prepared by the conventional solid-state reaction. The sample was characterized by X-ray powder diffraction. The AC electrical conductivity and the dielectric relaxation properties of this compound have been investigated by means of impedance spectroscopy measurements over a wide range of frequencies and temperatures, 200 Hz–5 MHz and 553–699 K, respectively. Both impedance and modulus analysis exhibit the grain and grain boundary contribution to the electrical response of the sample. The temperature dependence of the bulk and grain boundary conductivity were found to obey the Arrhenius law with activation energies Eg?=?0.94 (3)?eV and Egb?=?0.89 (1)?eV. The grain-and-grain boundary conductivities at 573 K are 1.07?×?10^?4 and 1.16?×?10^?5 (Ω^?1 cm^?1). The scaling behavior of the imaginary part of the complex impedance suggests that the relaxation describes the same mechanism at various temperatures. The near value of the activation energies obtained from the equivalent circuit, conductivity data, and analysis of M″ confirms that the transport is through ion hopping mechanism.     

Synthesis modified structural and dielectric properties of semiconducting zinc ferrospinels

The influence of preparation techniques on structural and dielectric properties of ZnCr_xFe_1−xO₄ (x=0, 0.1 abbreviated as Z and ZC) ferrite nano-particles synthesized using chemical co-precipitation (CCP), sol-gel (SG) and solid state reaction (SS) techniques is discussed. XRD profiles are used to confirm the single phase spinel ferrite formation. TEM images indicate the change in size and shape of particles on changing either the composition or the synthesis methodology. The TEM micrograph of samples obtained through CCP shows uniform particle size formation compared to those obtained through SG and SS. Sample prepared through CCP possess porosity >70% making these materials suitable for sensing applications. The dielectric loss, dielectric constant and ac conductivity are analyzed as a function of frequency, temperature and composition using impedance spectroscopy. A universal dielectric behavior has been predicted through temperature and frequency variations of different parameters. Dielectric constant is found to possess highest value for sample synthesized through SG which marks the possibility of using the SG derived ferrospinels as microwave device components.     

A new ferroelectric oxide Li2Pb2Pr2W2Ti4Nb4O30: Synthesis and characterization

A new ferroelectric oxide (Li₂Pb₂Pr₂W₂Ti₄Nb₄O₃₀) of tungsten bronze structural family has been synthesized by a solid-state reaction (mixed-oxide) route at high temperature (～1100 °C). X-ray structural analysis with room temperature diffraction data confirms the formation of a single phase compound. The scanning electron microscopic (SEM) texture of the surface of material sample exhibits a uniform grain distribution with a few small voids suggesting the formation of high-density pellet sample. Detailed studies of dielectric constant, tangent loss and polarization with temperature and frequency confirmed the existence of ferroelectric properties in the material with transition temperature much above room temperature. Study of electrical properties (impedance, modulus, conductivity, etc.) of the material exhibits a strong correlation between its micro-structure (i.e., bulk, grain boundary, etc.) and electrical parameters. The nature of variation of dc conductivity with temperature confirms the Arrhenius behavior of the material. The presence of ionic conductivity in the material was observed in its ac conductivity spectrum. Study of frequency dependence of ac conductivity suggests that the material obeys Jonscher's universal power law. The experimental electrical transport properties of the material clearly exhibit the existence of non-exponential-type of conductivity relaxation.     

Influence of Al doping on electrical properties of Ni–Cd nano ferrites

We have reported the structural and electrical properties of nano particles of Al doped Ni_0.2Cd_0.3Fe_2.5O₄ ferrite using X-ray diffraction, dielectric spectroscopy and impedance spectroscopy at room temperature. XRD analysis confirms that the system exhibits polycrystalline single phase cubic spinel structure. The average particle size estimated using Scherrer formula for Lorentzian peak (3 1 1), has been found 5(±) nm. The results obtained show that real (ε′), imaginary (ε″) part of the dielectric constant, loss tangent (tan δ), and ac conductivity (σ_ac) shows normal behaviour with frequency. The dielectric properties and ac conductivity in the samples have been explained on the basis of space charge polarization according to Maxwell–Wagner two-layer model and the Koop’s phenomenological theory. The impedance analysis shows that the value of grain boundary impedance increases with Al doping. The complex impedance spectra of nano particles of Al doped Ni–Cd ferrite have been analyzed and explained using the Cole–Cole expression.     

AC impedance analysis of LaLiMo2O8 electroceramics

Complex impedance analysis of a new rare earth-based ceramic oxide, LaLiMo₂O₈, prepared by a standard solid-state reaction technique has been carried out. Material formation under the reported conditions has been confirmed by X- ray diffraction studies. A preliminary structural analysis indicates the crystal structure to be orthorhombic. Electrical properties of the material sample have been studied using AC impedance spectroscopy technique. Impedance spectrum results indicate that the electrical properties of the material are strongly dependent on temperature and it bears a good correlation with the sample microstructure (i.e. the presence of bulk, grain boundary, etc.) in different temperature ranges. Evidences of temperature-dependent electrical relaxation phenomena in the material have also been observed. The bulk resistance, evaluated from complex impedance spectrum has been observed to decrease with rise in temperature showing a typical negative temperature coefficient of resistance (NTCR)-type behavior like that of semiconductors. The DC conductivity shows typical Arrhenius behavior when observed as a function of temperature. The AC conductivity spectrum has provided typical signature of an ionically conducting system and is found to obey Jonscher's universal power law. Modulus analysis has indicated the possibility of hopping mechanism for electrical transport processes in the system with non-exponential-type conductivity relaxation.     

Defect driven multiferroicity in Gd doped BiFeO3 at room temperature

This paper reports that defect driven magnetism can be obtained at room temperature by optimizing metal ion concentration in bismuth ferrite (BFO) following our novel slow step solid state sintering route. We observed a clean signature of enhanced multiferroic behavior in Gd doped bismuth ferrite (Gd-BFO) bulk ceramics at room temperature (RT). Bismuth rich iron deficient Gd-BFO ceramics were prepared by solid state route through slow step sintering schedule at 850 °C. At particular composition, (Bi_1.2Gd_0.1Fe_0.8O₃), this materials completely transform from rhombohedral R3c to orthorhombic Pn2₁a space group. We emphasized that excess bismuth is expected to act as point defects and occupy interstitials positions, which in turn interact by oxygen vacancies. These defects are likely to promote defect driven ferromagnetism in BFO system. Incorporation of Gd in presence of excess bismuth in BFO enhanced both spin and electric polarization at room temperature. We also infer that Gd substitution in BFO is likely to suppress spiral spin modulation, which also favors ferromagnetism in Gd-BFO.     

The influence of grain boundary on the conductivity of donor doped SrTiO3

The electrical conductivity of polycrystalline Sr(Ti_0.999Nb_0.001)O₃ was investigated. The conductivity was smaller by 1–2 order than that of the single crystal. The conductivity increased with temperature with the activation energy of 0.61 eV. The distribution of grain boundary nature of the polycrystalline sample was determined by Orientation Imaging Microscope (OIM) analysis. The ratio of coincident lattice boundaries was determined to be approximately 20%. The impedance of bicrystals across the grain boundary with different grain boundary type was measured. The grain boundary impedance was found to consist of two RC parallel components in series. The activation energies of them were 0.56–0.71 eV and 1.73–1.97 eV, respectively. These two processes were assigned to the grain boundary or annealed surface layer and the Schottky barrier between the bulk and the surface or the grain boundary layer. A possible conduction mechanism of polycrystalline material was considered that of the three dimensional network of the grain boundary layer.     

Ferromagnetic magnetization switching by an electric field: A review

Possible methods and problems of the development of magnetoresistive memory with electric field assisted writing have been considered. It has been shown that the most promising is the memory based on the compensated cut of multiferroic bismuth ferrite BiFeO₃. Small values of the weak ferromagnetic moment and linear magnetoelectric effect in BiFeO₃ are not obstacles to the realization of the magnetoresistive memory. Of interest is the memory switchable via piezoelectric layer induced elastic stresses, which uses the bistability of magnetization of the ferromagnetic layer.     

Electrical characterization of the [N(CH<Subscript>3</Subscript>)<Subscript>4</Subscript>][N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]ZnCl<Subscript>4</Subscript> compound

The [N(CH₃)₄][N(C₂H₅)₄]ZnCl₄ compound has been synthesized by a solution-based chemical method. The X-ray diffraction study at room temperature revealed an orthorhombic system with P2₁2₁2 space group. The complex impedance has been investigated in the temperature and frequency ranges 420–520 K and 200 Hz–5 MHz, respectively. The grain interior and grain boundary contribution to the electrical response in the material have been identified. Dielectric data were analyzed using the complex electrical modulus M ^* for the sample at various temperature. The modulus plots can be characterized by full width at half height or in terms of a non-exponential decay function ϕ(t) = exp[(−t/τ) ^β ]. The detailed conductivity study indicated that the electrical conduction in the material is a thermally activated process. The variation of the AC conductivity with frequency at different temperatures obeys the Almond and West universal law.     

Structural and electrical properties of KCa<Subscript>2</Subscript>Nb<Subscript>5</Subscript>O<Subscript>15</Subscript> ceramics

A polycrystalline sample of KCa₂Nb₅O₁₅ with tungsten bronze structure was prepared by a mixed oxide method at high temperature. A preliminary structural analysis of the compound showed an orthorhombic crystal structure at room temperature. Surface morphology of the compound shows a uniform grain distribution throughout the surface of the sample. Studies of temperature variation on dielectric response at various frequencies show that the compound has a transition temperature well above the room temperature (i.e., 105°C), which was confirmed by the polarization measurement. Electrical properties of the material have been studied using a complex impedance spectroscopy (CIS) technique in a wide temperature (31–500°C) and frequency (10²–10⁶ Hz) range that showed only bulk contribution and non-Debye type relaxation processes in the material. The activation energy of the compound (calculated from both the loss and modulus spectrum) is same, and hence the relaxation process may be attributed to the same type of charge carriers. A possible ‘hopping’ mechanism for electrical transport processes in the system is evident from the modulus analysis. A plot of dc conductivity (bulk) with temperature variation demonstrates that the compound exhibits Arrhenius type of electrical conductivity.      

Spray pyrolytic deposition of solid electrolyte Bi2V0.9Cu0.1O5.35 films

Copper substituted bismuth vanadate films have been successfully deposited first time by spray pyrolysis technique on glass substrates suitable for low temperature solid oxide fuel cells. Desired phase formation of polycrystalline Bi₂V_0.9Cu_0.1O_5.35 (BICUVOX.10) was confirmed by X-ray diffraction technique. These films were further studied with EDAX and SEM techniques for their compositional and morphological characterization. Electrical conductivity of BICUVOX.10 is found to be 5.7 × 10⁻² (Ω cm)⁻¹ at 698 K, predicts the onset temperature for ionic contribution suitable for low temperature SOFC applications. Room temperature complex impedance plot reveals that electrical process arises due to contribution from the grain interior.     

Study of dielectric and impedance properties of Mn ferrites

The paper reports on the effect of Al substitution on the structural and electrical properties of bulk ferrite series of basic composition MnFe_2−2xAl_2xO₄ (0.0≤x≤0.5) synthesized using solid state reaction method. XRD analysis confirms that all the samples exhibit single phase cubic spinel structure excluding presence of any secondary phase. The dielectric constant shows a normal behaviour with frequency, whereas the loss tangent exhibits an anomalous behaviour with frequency for all compositions. Variation of dielectric properties and ac conductivity with frequency reveals that the dispersion is due to Maxwell-Wagner type of interfacial polarization in general and hopping of charge between Fe⁺² and Fe⁺³ as well as between Mn⁺² and Mn⁺³ ions at octahedral sites. The complex impedance plane spectra shows the presence of two semicircles up to x=0.2, and only one semicircle for the higher values of x. The analysis of the data shows that the resistive and capacitive properties of the Mn ferrite are mainly due to processes associated with grain and grain boundaries.