共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
3.
Renewable materials derived from vegetable oils are now widely developed for obtaining green polymers. One of the applications of those polymers is in the field of Enhanced Oil Recovery (EOR) where the polymers are put in the injection wells to increase water viscosity resulting in higher efficiency of oil production. Indonesia is very rich in crude palm oil and therefore, it was chosen as the starting material for polymer synthesis. The objective of this work is to prepare the monomer first, by doing the olefin metathesis reaction between crude palm oil FAME (fatty acid methyl ester) and ethylene. The reaction was carried out using a Grubbs II catalyst in order to obtain methyl 9-decenoate which is used later as the monomer for EOR application. The resulting product was characterized using Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared (FTIR) spectroscopy as well as Gas Chromatography Mass Spectrometry (GC-MS). Based on the functional group analysis, it was found that methyl 9-decenoate has successfully been synthesized. 相似文献
4.
以(甲基)丙烯酰氯为酰化剂,三乙胺做缚酸剂合成了分子中含有1~3个(甲基)丙烯酰基的胆酸衍生物。结果显示,以酰氯作酰化试剂,胆酸甲酯分子中3个羟基的反应活性顺序是:C3-OH>C12-OH>C7-OH。 相似文献
5.
6.
7.
8.
Determination of Fatty Acid Methyl Esters in Biodiesel Produced from Yellow Horn Oil by LC 总被引:2,自引:0,他引:2
Yu-Jie Fu Yuan-Gang Zu Li-Li Wang Nai-Jing Zhang Wei Liu Shuang-Ming Li Su Zhang 《Chromatographia》2008,67(1-2):9-14
A simple and accurate HPLC method with refractive index detection was developed to determine the main fatty acid methyl esters
in biodiesel produced from yellow horn oil. Methyl linoleate, methyl linolenate, methyl arachidate, methyl stearate, methyl
palmitate and methyl oleate were separated on a HIQ SIL C18W column using methanol as mobile phase. The method has good repeatability
and precision, the intraday and interday RSD for both retention time and peak area was less than 3.2%. The LOD (S/N = 3) and
LOQ (S/N = 9) were less than 0.004 and 0.015 mg mL−1, respectively. 相似文献
9.
10.
Costa Rodrigues R Volpato G Wada K Záchia Ayub MA 《Applied biochemistry and biotechnology》2009,152(3):394-404
In this work, we describe the optimization of the ethanolysis of soybean oil by the enzyme Lipozyme™ TL-IM in the lipase-catalyzed
biodiesel synthesis and the improvement of the enzyme stability over repeated batches. The studied process variables were:
reaction temperature, substrate molar ratio, enzyme content, and volume of added water. Fractional factorial design was used
to analyze the variables so as to select those with higher influence on the reaction and then perform a central composite
design to find the optimal reaction conditions. The optimal conditions found were: temperature, 26 °C; substrate molar ratio,
7.5:1 (ethanol/oil); enzyme content, 25% in relation to oil weight; and added water, 4% in relation to oil weight. Under these
conditions, the yield conversion obtained was 69% in 12 h. The enzyme stability assessment in repeated batches was carried
out by washing the immobilized enzyme with different solvents (n-hexane, water, ethanol, and propanol) after each batch. In the treatment with n-hexane, around 80% of the enzyme activity still remains after seven cycles of synthesis, suggesting its economical application
on biodiesel production. 相似文献
11.
12.
The stereoselective synthesis of (2R,4R)-2-N-tert-butyloxycarbonyl amino-4,5-epoxido-valeric acid methyl ester 8,which is the key intermediate for the synthesis of (2′S,2R)-3-trans-nitrocyclopropyl-alanine,was first accomplished. 相似文献
13.
14.
在一室型电解池中, 以饱和CO2的N,N-二甲基甲酰胺(DMF)为溶液, Mg为牺牲阳极, 不锈钢、钛、铜、镍和银为工作电极, 通过电化学方法固定CO2, 在恒电流电解的条件下研究了对甲氧基苯乙酮的电羧化反应, 得到了重要的有机合成中间体2-羟基-2-(4-甲氧基苯基)-丙酸甲酯. 电羧化产率受支持电解质种类、电极材料、电流密度、电解电量和反应温度等影响. 经过反应条件的优化, 目标产物在恒定电流密度为5.0 mA/cm2的条件下产率达到63%. 同时, 以玻碳电极-Pt丝螺旋电极-Ag/AgI/I-为三电极体系, 研究了对甲氧基苯乙酮的电化学行为, 根据底物在通入CO2前后循环伏安图的变化推测了对甲氧基苯乙酮的电羧化反应机理. 相似文献
15.
粘质沙雷氏菌脂肪酶的固定化及催化拆分反式3-(4’-甲氧苯基)缩水甘油酸甲酯 总被引:1,自引:0,他引:1
对粘质沙雷氏菌脂肪酶进行了固定化研究,确定硅藻土和环氧树脂Eupergit C是较好的固定化载体. 固定化后酶的热稳定性、 pH稳定性及储存稳定性均明显提高. 以Eupergit C共价固定的脂肪酶,其操作稳定性比硅藻土吸附酶好,重复使用10批次后,剩余酶活力还有50%左右,戊二醛交联对Eupergit C固定化酶稳定性的提高没有明显效果,而硅藻土吸附酶经戊二醛交联后稳定性有所提高,经5批次反应后剩余酶活力还有50%. 使用交联后的硅藻土固定化酶(1 g, 200 U), 在两相搅拌反应器(工作体积200 ml, 甲苯∶水体积比=1)中对地尔硫卓手性前体(±)-反式3-(4’-甲氧苯基)缩水甘油酸甲酯((±)-MPGM)(有机相浓度为0.5 mol/L)进行了催化拆分,经5批次反应后,共得纯(2R,3S)-(-)-MPGM 18.6 g, 产品光学纯度(对映体过量)>99%, 总收率为37.2%. 相似文献
16.
HUANG Jie SONG Ji-Rong② REN Ying-Hui XU Kang-Zhen MA Hai-Xia 《结构化学》2006,25(2):168-172
1 INTRODUCTION Pyrimidinyl thioureas have been studied for many years because of their broad antibiosis and sterilibza- tion properties. Recent years’ study shows that pyri- midinyl thioureas not only can be used to kill insects and adjust plant growth, but also have anti-viral ac- tivities[1, 2]. From our early quantum study on these compounds, we find that they have several active cen- ters and can form polyligand complexes with metals easily[3]. These complexes are widely used as ant… 相似文献
17.
18.
以磺酸功能化咪唑离子液体为催化剂,以3-羟基丙酸甲酯为原料,采用自身酯交换法合成了具有生物可降解性能的聚羟基脂肪酸酯.系统考察了离子液体种类、反应温度以及聚合反应时间对反应性能的影响,同时采用红外、核磁、热分析等手段对产物进行表征.研究结果表明:阴离子为CF3SO-3的磺酸功能化离子液体在120℃的低温下催化聚合反应所得聚酯Mw可达10 159,收率82.1%;通过水洗方法可有效去除产物中的离子液体催化剂,从而避免催化剂污染产物. 相似文献
19.
20.
A series of new methyl N-(dimedioxy / 3,5-diacetoxybenzoyl)-L-amino acid esters have been synthesized by two methods. 相似文献