Luminescence,Stability, and Proton Response of an Open‐Shell (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl Radical

A luminescent open‐shell organic radical with high chemical stability was synthesized. (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl radical (PyBTM) was photoluminescent under various conditions. Fluorescence quantum yields of 0.03, 0.26, and 0.81 (the highest value reported for a stable organic radical) were obtained in chloroform, in poly(methyl methacrylate) film at room temperature, and in an EPA matrix (diethyl ether:isopentane:ethanol) at 77 K, respectively. The photostability of PyBTM is up to 115 times higher than that of the tris(2,4,6‐trichlorophenyl)methyl radical, a previously reported luminescent radical. The pyridine moiety of PyBTM acts as a proton coordination site, thereby allowing for control of the electronic and optical properties of the radical by protonation and deprotonation.     

Enhanced Luminescent Properties of an Open‐Shell (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl Radical by Coordination to Gold

A gold(I) complex containing an open‐shell luminescent (3,5‐dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl (PyBTM) radical was prepared. The complex showed fluorescence centered mainly on the coordinated PyBTM ligand. The photophysical and photochemical properties were positively modulated upon coordination to Au^I; the photoluminescence quantum yield, fluorescence wavelength, and the stability in the photoexcited state all increased.     

Magnetoluminescence in a Photostable,Brightly Luminescent Organic Radical in a Rigid Environment

We investigated the emission properties of a photostable luminescent organic radical, (3,5‐dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl radical (PyBTM), doped into host molecular crystals. The 0.05 wt %‐doped crystals displayed luminescence attributed to a PyBTM monomer with a room‐temperature emission quantum yield of 89 %, which is exceptionally high among organic radicals. The 10 wt %‐doped crystals exhibited both PyBTM monomer and excimer‐centered emission bands, and the intensity ratio of these two bands was modulated drastically by applying a magnetic field of up to 18 T at 4.2 K. This is the first observation of a magnetic field affecting the luminescence of organic radicals, and we also proposed a mechanism for this effect.     

Magnetoluminescence in a Photostable,Brightly Luminescent Organic Radical in a Rigid Environment

We investigated the emission properties of a photostable luminescent organic radical, (3,5‐dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl radical (PyBTM), doped into host molecular crystals. The 0.05 wt %‐doped crystals displayed luminescence attributed to a PyBTM monomer with a room‐temperature emission quantum yield of 89 %, which is exceptionally high among organic radicals. The 10 wt %‐doped crystals exhibited both PyBTM monomer and excimer‐centered emission bands, and the intensity ratio of these two bands was modulated drastically by applying a magnetic field of up to 18 T at 4.2 K. This is the first observation of a magnetic field affecting the luminescence of organic radicals, and we also proposed a mechanism for this effect.     

Luminescent Radical‐Excimer: Excited‐State Dynamics of Luminescent Radicals in Doped Host Crystals

The excited‐state dynamics of the photostable luminescent organic radical (3,5‐dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl (PyBTM) doped in a host crystal was investigated by using optically detected magnetic resonance (ODMR) and time‐resolved emission spectroscopies. In the radical system, the unpaired electron can be used as the probe for studying the electronic state and its dynamics. The mixed crystal with a high concentration of the radical showed excimer emission, together with the monomer emission. The ODMR signals were observed with opposite signs for monitoring the monomer and the excimer emissions. Based on their temperature and concentration dependencies, the excited‐state dynamics on the doped crystal and the mechanism of the excimer formation and the ODMR signal generation are discussed with the help of the quantum mechanical simulation of the excited‐state spin dynamics. The initial process of excimer formation has been clarified for the first time from the viewpoint of the spin‐dynamics.     

Research Progress on Triarylmethyl Radical-Based High-Efficiency OLED

Perchlorotrityl radical (PTM), tris (2,4,6-trichlorophenyl) methyl radical (TTM), (3,5-dichloro-4-pyridyl) bis (2,4,6 trichlorophenyl) methyl radical (PyBTM), (N-carbazolyl) bis (2,4,6-trichlorophenyl) methyl radical (CzBTM), and their derivatives are stable organic radicals that exhibit light emissions at room temperature. Since these triarylmethyl radicals have an unpaired electron, their electron spins at the lowest excited state and ground state are both doublets, and the transition from the lowest excited state to the ground state does not pose the problem of a spin-forbidden reaction. When used as OLED layers, these triarylmethyl radicals exhibit unique light-emitting properties, which can increase the theoretical upper limit of the OLED’s internal quantum efficiency (IQE) to 100%. In recent years, research on the luminescent properties of triarylmethyl radicals has attracted increasing attention. In this review, recent developments in these triarylmethyl radicals and their derivatives in OLED devices are introduced.     

Modulated Luminescence of a Stable Open‐Shell Triarylmethyl Radical: Effects of Chemical Modification on Its Electronic Structure and Physical Properties

The open‐shell luminescent (3,5‐dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl (PyBTM) radical contains a nitrogen atom that behaves as a stimulus‐responsive site. Chemical modification at this nitrogen atom, such as coordination of B(C₆F₅)₃ or methylation, shifts the emission maximum to the low‐energy region and increases the reduction potential. The emission colour may be regulated by the reversible Lewis acid–base reaction between B(C₆F₅)₃ and PyBTM. Comparison of the optical and electrochemical properties of the radicals with the electronic structures calculated by density functional theory has indicated that the chemical modification decreased the energy level of the β‐singly occupied molecular orbital, a key orbital in determining the optical and electrochemical properties of such systems.     

Stable All‐Organic Radicals with Ambipolar Charge Transport

A series of neutral long‐lived purely organic radicals based on the stable [4‐(N‐carbazolyl)‐2,6‐dichlorophenyl]bis(2,4,6‐trichlorophenyl)methyl radical adduct (Cbz‐TTM) is reported herein. All compounds exhibit ambipolar charge‐transport properties under ambient conditions owing to their radical character. High electron and hole mobilities up to 10^?2 and 10^?3 cm² V^?1 s^?1, respectively, were achieved. Xerographic single‐layered photoreceptors were fabricated from the radicals studied herein, exhibiting good xerographic photosensitivity across the visible spectrum.     

Organic Light‐Emitting Diodes Using a Neutral π Radical as Emitter: The Emission from a Doublet

Triplet harvesting is a main challenge in organic light‐emitting devices (OLEDs), because the radiative decay of the triplet is spin‐forbidden. Here, we propose a new kind of OLED, in which an organic open‐shell molecule, (4‐N‐carbazolyl‐2,6‐dichlorophenyl)bis(2,4,6‐trichlorophenyl)methyl (TTM‐1Cz) radical, is used as an emitter, to circumvent the transition problem of triplet. For TTM‐1Cz, there is only one unpaired electron in the highest singly occupied molecular orbital (SOMO). When this electron is excited to the lowest singly unoccupied molecular orbital (SUMO), the SOMO is empty. Thus, transition back of the excited electron to the SOMO is totally spin‐allowed. Spectral analysis showed that electroluminescence of the OLED originated from the electron transition between SUMO and SOMO. The magneto‐electroluminescence measurements revealed that the spin configuration of the excited state of TTM‐1Cz is a doublet. Our results pave a new way to obtain 100 % internal quantum efficiency of OLEDs.     

Structural and Magnetic Studies on Nickel(II) and Cobalt(II) Complexes with Polychlorinated Diphenyl(4-pyridyl)methyl Radical Ligands

New magnetic metal complexes with organic radical ligands, [M(hfac)₂(PyBTM)₂] (M = Ni^II, Co^II; hfac = hexafluoroacetylacetonato, PyBTM = (3,5-dichloro-4-pyridyl)bis(2,4,6-trichlorophenyl)methyl radical), were prepared and their crystal structures, magnetic properties, and electronic structures were investigated. Metal ions in [M(hfac)₂(PyBTM)₂] constructed distorted octahedral coordination geometry, where the two PyBTM molecules ligated in the trans configuration. Magnetic investigation using a SQUID magnetometer revealed that χT increased with decreasing temperature from 300 K in the two complexes, indicating an efficient intramolecular ferromagnetic exchange interaction taking place between the spins on PyBTM and M with J/k_B of 21.8 K and 11.8 K for [Ni^II(hfac)₂(PyBTM)₂] and [Co^II(hfac)₂(PyBTM)₂]. The intramolecular ferromagnetic couplings in the two complexes could be explained by density functional theory calculations, and would be attributed to a nearly orthogonal relationship between the spin orbitals on PyBTM and the metal ions. These results demonstrate that pyridyl-containing triarylmethyl radicals are key building blocks for magnetic molecular materials with controllable/predictable magnetic interactions.     

Selective and Sensitive Aqueous‐Phase Detection of 2,4,6‐Trinitrophenol (TNP) by an Amine‐Functionalized Metal–Organic Framework

Highly selective and sensitive aqueous‐phase detection of nitro explosive 2,4,6‐trinitrophenol (TNP) by a hydrolytically stable 3D luminescent metal–organic framework is reported. The compound senses TNP exclusively even in the presence of other nitro‐compounds, with an unprecedented sensitivity in the MOF regime by means of strategic deployment of its free amine groups. Such an accurate sensing of TNP, widely recognized as a harmful environmental contaminant in water media, establishes this new strategic approach as one of the frontiers to tackle present‐day security and health concerns in a real‐time scenario.     

A Stable Room‐Temperature Luminescent Biphenylmethyl Radical

There is only one family of room‐temperature luminescent radicals, the triphenylmethyl radicals, to date. Herein, we synthesize a new stable room‐temperature luminescent radical, (N‐carbazolyl)bis(2,4,6‐tirchlorophenyl)methyl radical (CzBTM), which has improved properties compared to the triphenylmethyl radicals. X‐ray crystallography, electron paramagnetic resonance spectroscopy, and magnetic susceptibility measurements confirmed the radical structure. CzBTM shows room‐temperature deep‐red to near‐infrared emission in various solutions. Both thermal and photo stability were significantly enhanced by the replacement of trichlorobenzene by the carbazole moiety. The electroluminescence results of CzBTM verify its potential application to circumvent the problem of triplet harvesting in traditional fluorescent OLEDs. A new family of stable luminescent radicals based on CzBTM is anticipated.     

Synthesis and photoproperties of Eu(III)‐bearing star polymers as luminescent materials

Water‐soluble luminescent material was developed by introducing europium (Eu(III)) ions into the core of a star polymer. Living radical polymerization was used to obtain the star polymer. The strategy to introduce Eu(III) ions into the star polymer was studied using poly(methyl methacrylate) as an arm. The best Eu(III) ion introduction was obtained by simultaneous introduction, resulting in about 30 µmol/g‐polymer, which needed only one step for synthesis. The utilization of a hydrophilic polymer such as poly(ethylene oxide) (PEO) as an arm produced a water‐soluble star polymer. The Eu(III)‐bearing PEO star polymer obtained in this study was water soluble and showed fluorescence. In addition, it was stable in water after 1 month. The Eu(III)‐bearing star polymer exhibited luminescent properties under UV light irradiation with relatively high quantum yields of 60% in organic solution and 19% in aqueous solution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2527–2535     

The crystal structure of 9‐chloro‐4,5‐dihydro‐2‐ethyl‐1‐(2,4,6‐trichlorophenyl)‐1H‐1,2,4‐triazolo[3,2‐d][1,5]‐benzoxazepinium hexachloroantimonate

The title compound 4 , i.e. 9‐chloro‐4,5‐dihydro‐2‐ethyl‐1‐(2,4,6‐trichlorophenyl)‐1H‐1,2,4‐triazolo[3,2‐d]‐[1,5]benzoxazepinium hexachloroantimonate, is a novel 6‐7‐5 tricyclic heterocycle. C₁₈H₁₄Cl₄N₃O·SbCJ₆, M = 764.61, P2₁/c(#14), a = 13.457(4), b = 11.583(2), c = 18.992(3) Å α = 90, β = 110.11(1)°, Z = 4, V = 2780(1) ų, D_c = 1.827 g/cc, μ (MoKα) = 19.69 cm^?1, F(000) = 1488.00, T = 293 K, R_int = 0.055 for 3094 independent reflections with I>3.00σ(I). The five‐membered heterocyclic ring is nearly planar, with the trichlorophenyl ring at N(2) almost perpendicular to it. However, the seven‐membered ring is not planar, but adopts a twist‐boat conformation.     

The synthesis and properties of new carbohydrate‐modified mesoionic thiazolo[3,2‐α]pyrimidine‐5,7‐dione acyclonucleosides

The synthesis of the first examples of Class II mesoionic thiazolopyrimidine acyclonucleosides (MTA) incorporating the 2,3‐dihydroxypropyl moiety as the sugar simulator is described. First, 2‐bromothiazole was reacted with excess 1‐amino‐2,3‐propanediol acetonide via an aromatic nucleophilic substitution reaction to yield 1‐(2‐thiazolylamino)‐2,3‐propanediol acetonide. This acetonide intermediate was condensed at 160° with substituted bis(2,4,6‐trichlorophenyl) malonic esters to form a series of protected acyclonucleosides termed anhydro‐(8‐((2,2‐dimethyl‐1,3‐dioxolan‐4‐yl)methyl)‐5‐hydroxy‐7‐oxothiazolo[3,2‐a]pyrimi‐dinium hydroxides) which differ in their 6‐position substituent. Deprotection of these acyclonucleosides using p‐toluenesulfonic acid catalyst in methanol at 65° yielded the desired Class II MTA, anhydro‐(8‐(2,3‐dihydroxypropyl)‐5‐hydroxy‐7‐oxothiazolo[3,2‐a]pyrimidinium hydroxides).     

The effect of the core on the thermotropic behavior of three‐arm star poly[11‐(4′‐cyanophenyl‐4′′‐phenoxy)undecyl acrylate]s synthesized by atom transfer radical polymerization

“Three‐arm star” poly[11‐(4′‐cyanophenyl‐4′′‐phenoxy)undecyl acrylate]s were synthesized by atom transfer radical polymerization (ATRP) of 11‐(4′‐cyanophenyl‐4′′‐phenoxy)undecyl acrylate using two new trifunctional initiators: 1,3,5‐tri‐ (methyl 2‐bromopropionate)benzene and 2,4,6‐tri[4′‐methyl(2′′‐bromopropionate)phenoxymethyl]mesitylene. The polymers synthesized with 1,3,5‐tri(methyl 2‐bromopropionate)benzene (series II) contained 14–127 repeat units according to gel permeation chromatography relative to linear polystyrene (GPC_PSt) and 13–271 repeat units according to GPC with a light scattering detector (GPC_LS). Those synthesized with 2,4,6‐tri[4′‐methyl(2′′‐bromopropionate)phenoxymethyl]mesitylene (series III) contained 14–87 repeat units according to GPC_PSt and 10–120 repeat units according to GPC_LS. The absolute molecular weight, size, and shape of both series of polymers were characterized by light scattering in CH₂Cl₂, and their thermotropic behavior was analyzed using differential scanning calorimetry; both types of properties were compared to those of the other architectures, especially the corresponding three‐arm star poly[11‐(4′‐cyanophenyl‐4′′‐phenoxy)undecyl acrylate]s synthesized previously using 1,3,5‐trisbromomethylmesitylene as the initiator. The size and shape of the three‐arm star polymers in CH₂Cl₂ are similar, although the isotropization temperature in the solid state decreases and the breadth of the isotropization transition increases with increasing size and flexibility of the trifunctional core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4363–4382, 2008     

Facile and versatile synthesis of rod‐coil poly(3‐hexylthiophene)‐based block copolymers by nitroxide‐mediated radical polymerization

A well‐defined and monofunctional poly(3‐hexylthiophene)‐based (P3HT) macroinitiator has been obtained through a clean, simple, and an efficient multistep synthesis process. The macroinitiator is obtained via intermolecular radical 1,2‐addition onto an ω‐acrylate‐terminated P3HT macromonomer. In a second step, well‐defined rod‐coil block copolymers were obtained by nitroxide‐mediated radical polymerization (NMRP) using the so‐called Blocbuilder^®. The polymerization was found to be controlled with various monomers such as styrene, isoprene, 4‐vinylpyridine, or methyl acrylate. This process constitutes a very promising way to obtain versatile and clean materials for organic electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Synthesis and Characterization of Poly(ϵ‐CL)‐block‐poly(MMA‐co‐St)‐block‐poly(ϵ‐CL) by Combination of Coordination and Controlled Radical Polymerization

The triblock copolymer poly(ϵ‐caprolactone)‐block‐poly[(methyl methacrylate)‐co‐styrene]‐block‐poly(ϵ‐caprolactone) was synthesized by a combination of coordination polymerization and controlled radical mechanism. The poly(ϵ‐caprolactone) prepolymers (PCL_BP) were first obtained by coordination polymerization using benzopinacol as the initiator and aluminium triisopropoxide as the promoter at room temperature. It was determined by means of UV and NMR spectroscopy that the benzopinacolate groups are left intact in the PCL_BP prepolymers; no isomerization was found. The benzopinacolate groups incorporated into the poly(ϵ‐caprolactone) then initiate the copolymerization of styrene (St) and methyl methacrylate (MMA) via a controlled radical mechanism at 95°C. The desired block copolymers were characterized by GPC, IR, UV and NMR spectroscopy in detail.     

EPR Study on the Complex Formed by Charge‐Transfer Process between Ground‐state Acceptor 2, 3‐Dicyano‐5, 6‐dichloro‐1, 4‐benzoquinone and Some Donors and on Cation Radical of Perylene (or Pyrene)

EPR study showed that the semi‐quinone radical anion of 2,3‐dicyano‐5,6‐dichloro‐1,4‐benzoquinone (DDQ) was formed in a charge transfer process between ground‐state DDQ as acceptor and each one of following ground state donors, i.e., 4‐methyl‐4′‐tridecyl‐2, 2′‐bipyridyl; 4‐methyl‐4′‐nonyl‐2, 2′‐bipyridyl; bis (2,2′‐bipyridyl) (4‐methyl‐4′‐heptadecyl‐2, 2′‐bipyridyl)ruthenium(2+) perchlorate and perylene. EPR study also showed that there are perylene cation radical and pyrene cation radical in the following experimental conditions: (a) in 98% sulfuric add. (b) 10^?3 mol/L perylene (or pyrene) was dissolved in trifluoroacetic acid‐nitrobenzene (1: 1 V/V).